Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Atomic binding corrections for high-energy fixed target experiments

High-energy beams incident on a fixed target may scatter against atomic electrons. To a first approximation, one can treat these electrons as free and at rest. For precision experiments, however, it is important to be able to estimate the size of, and when necessary calculate, subleading corrections. We discuss atomic binding corrections to relativistic lepton-electron scattering. We analyze hydrogen in detail, before generalizing our analysis to multi-electron atoms. Using the virial theorem, and many-body sum rules, we find that the corrections can be reduced to measured binding energies, and the expectation value of a single one-body operator. We comment on the phenomenological impact for neutrino flux normalization and an extraction of hadronic vacuum polarization from elastic muon electron scattering at MUonE.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photoinduced Reconfiguration Cycle in a Molecular Adsorbate Layer Studied by Femtosecond Inner-Shell Photoelectron Spectroscopy

A time-resolved study of core-level chemical shifts in a monolayer of aromatic molecules reveals complex photoinduced reaction dynamics. The combination of electron spectroscopy for chemical analysis and ultrashort pulse excitation in the extreme ultraviolet allows performing time-correlated 4d-core-level spectroscopy of iodine atoms that probe the local chemical environment in the adsorbate molecule. The selectivity of the method unveils metastable molecular configurations that appear about 50 ps after the excitation and are efficiently quenched back to the ground state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of Bulk Vitreous Cadmium Germanium Arsenide

Abstract Cadmium-germanium-diarsenide (“CGA”) glasses were synthesized in bulk form (~2.4 cm3) using the procedures adapted from the literature. Several issues involved in the fabrication and quenching of amorphous CdGexAs2 (x = 0.45, 0.65, 0.85, 1.00) are described. An innovative processing route is presented to enable quenching of vitreous, crack-free ingots with sizes up to 10 mm diameter, and 30 – 40 mm long. Specimens from selected ingots were characterized using thermal analysis, optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, particle-induced X-ray emission, Rutherford backscattering, secondary ion mass spectrometry, X-ray diffraction, density, and optical spectroscopy. Variations in properties as a function of processing conditions and composition are described. Results show that the density of defect states in the middle of the band gap and near the band edges can be decreased three ways: through suitable control of the processing conditions, by doping the material with hydrogen, and by increasing the concentration of Ge in the glass.

08 HYDROGEN↗

Identifying a forward-scattering superconductor through pump-probe spectroscopy

Electron-boson scattering that is peaked in the forward direction has been suggested as an essential ingredient for enhanced superconductivity observed in FeSe monolayers. Here, we study the superconducting state of a system dominated by forward scattering in the time domain and contrast its behavior against the standard isotropic BCS case for both s- and d-wave symmetries. An analysis of the electron's dynamics in the pump-driven non-equilibrium state reveals that the superconducting order in the forward-focused case is robust and persistent against the pump-induced perturbations. The superconducting order parameter also exhibits a non-uniform melting in momentum space. We show that this behavior is in sharp contrast to the isotropic interaction case and propose that time-resolved approaches are a potentially powerful tool to differentiate the nature of the dominant coupling in correlated materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lead free CH{sub 3}NH{sub 3}SnI{sub 3} perovskite thin-film with p-type semiconducting nature and metal-like conductivity

Lead free CH{sub 3}NH{sub 3}SnI{sub 3} perovskite thin film was prepared by low temperature solution processing and characterized using current sensing atomic force microscopy (CS-AFM). Analysis of electrical, optical, and optoelectrical properties reveals unique p-type semiconducting nature and metal like conductivity of this material. CH{sub 3}NH{sub 3}SnI{sub 3} film also showed a strong absorption in visible and near infrared spectrum with absorption onset of 1.3 eV. X-ray Diffraction analysis and scanning electron microscopy (SEM) confirmed a structure of this compound and uniform film formation. The morphology, film uniformity, light harvesting and electrical properties strongly depend on preparation method and precursor solution. CH{sub 3}NH{sub 3}SnI{sub 3} films prepared based on dimethylformamide (DMF) showed higher crystallinity and light harvesting capability compared to the film based on combination of dimethyl sulfoxide (DMSO) with gamma-butyrolactone (GBL). Local photocurrent mapping analysis showed that CH{sub 3}NH{sub 3}SnI{sub 3} can be used as an active layer and have a potential to fabricate lead free photovoltaic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron interactions and Dirac fermions in graphene-Ge{sub 2}Sb{sub 2}Te{sub 5} superlattices

Graphene based superlattices have been attracted worldwide interest due to the combined properties of the graphene Dirac cone feature and all kinds of advanced functional materials. In this work, we proposed a novel series of graphene-Ge{sub 2}Sb{sub 2}Te{sub 5} superlattices based on the density functional theory calculations. We demonstrated the stability in terms of energy and lattice dynamics for such kind of artificial materials. The analysis of the electronic structures unravels the gap opening nature at Dirac cone of the insert graphene layer. The Dirac fermions in the graphene layers are strongly affected by the electron spin orbital coupling in the Ge{sub 2}Sb{sub 2}Te{sub 5} layers. The present results show the possible application in phase-change data storage of such kind of superlattice materials, where the Ge{sub 2}Sb{sub 2}Te{sub 5} layers exhibit as the phase-change data storage media and the graphene layer works as the electrode, probe, and heat conductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Study of Beam Position Diagnostics with Beam-excited Dipole Higher Order Modes using a Downconverter Test Electronics in Third Harmonic 3.9 GHz Superconducting Accelerating Cavities at FLASH

Beam-excited higher order modes (HOM) in accelerating cavities contain transverse beam position information. Previous studies have narrowed down three modal options for beam position diagnostics in the third harmonic 3.9 GHz cavities at FLASH. Localized modes in the beam pipes at approximately 4.1 GHz and in the fifth cavity dipole band at approximately 9 GHz were found, that can provide a local measurement of the beam position. In contrast, propagating modes in the first and second dipole bands between 4.2 and 5.5 GHz can reach a better resolution. All the options were assessed with a specially designed test electronics built by Fermilab. The aim is to define a mode or spectral region suitable for the HOM electronics. Two data analysis techniques are used and compared in extracting beam position information from the dipole HOMs: direct linear regression and singular value decomposition. Current experiments suggest a resolution of 50 {\mu}m accuracy in predicting local beam position using modes in the fifth dipole band, and a global resolution of 20 {\mu}m over the complete module. Based on these results we decided to build a HOM electronics for the second dipole band and the fifth dipole band, so that we will have both high resolution measurements for the whole module, and localized measurements for individual cavity. The prototype electronics is being built by Fermilab and planned to be tested in FLASH by the end of 2012.

43 PARTICLE ACCELERATORS↗

Alkali-silica reaction products: Comparison between samples from concrete structures and laboratory test specimens

Alkali-silica gels (ASG) were investigated in concrete from bridge structures (constructed from the 1920s to 2000), as well as in experimental specimens; employing optical microscopy, petrographic image analysis, and scanning electron microscopy combined with energy dispersive spectroscopy (SEM/EDS). The main differences were found in the chemical composition and morphology of the ASGs. ASGs which had formed in older concrete samples (50-80 years old) show a partly crystalline structure and higher Ca{sup 2+} content, indicating their aging and maturation. Younger concrete samples and experimental test specimens exhibit the presence of amorphous ASG. The chemistry of ASG from experimental specimens reflects the chemical composition of accelerating solutions. - Research Highlights: {yields} Quantitative analysis of alkali-silica gels {yields} Comparison of ASR in experimental conditions with ASR in bridge structures {yields} Investigation of factors affecting alkali-silica reaction {yields} Investigation of ASR of different types of aggregates.

36 MATERIALS SCIENCE↗

Widely Tunable Optical and Thermal Properties of Dirac Semimetal Cd 3 As 2

In this paper, a detailed analysis of the temperature-dependent optical properties of epitaxially grown cadmium arsenide (Cd 3 As 2 ), a newly discovered 3D Dirac semimetal is reported. Fermi level tuning—instigated from Pauli-blocking in the linear Dirac cone—and varying Drude response, generate large variations in the mid- and far-infrared optical properties. Thermo-optic shifts larger than those of traditional III–V semiconductors are demonstrated. Electron scattering rate, plasma frequency edge, Fermi level shift, optical conductivity, and electron effective mass analysis of Cd 3 As 2 thin-films are quantified and discussed in detail. The ab initio density functional study and experimental analysis of epitaxially grown Cd 3 As 2 promise applications for nanophotonic and nanoelectronic devices, such as reconfigurable metamaterials and metasurfaces, nanoscale thermal emitters, and on-chip directional antennas.

36 MATERIALS SCIENCE↗

New reflections on hard X-ray photon-in/photon-out spectroscopy

Analysis of the electronic structure and local coordination of an element is an important aspect in the study of the chemical and physical properties of materials. This is particularly relevant at the nanoscale where new phases of matter may emerge below a critical size. X-ray emission spectroscopy (XES) at synchrotron radiation sources and free electron lasers has enriched the field of X-ray spectroscopy. Additionally, the spectroscopic techniques derived from the combination of X-ray absorption and emission spectroscopy (XAS–XES), such as resonant inelastic X-ray scattering (RIXS) and high energy resolution fluorescence detected (HERFD) XAS, are an ideal tool for the study of nanomaterials. New installations and beamline upgrades now often include wavelength dispersive instruments for the analysis of the emitted X-rays. With the growing use of XAS–XES, scientists are learning about the possibilities and pitfalls. We discuss some experimental aspects, assess the feasibility of measuring weak fluorescence lines in dilute, radiation sensitive samples, and present new experimental approaches for studying magnetic properties of colloidal nanoparticles directly in the liquid phase.

47 OTHER INSTRUMENTATION↗

Iron and manganese-related magnetic centers in hexagonal silicon carbide: A possible roadmap for spintronic devices

The electronic and magnetic properties of manganese- and iron-doped 4H-SiC were investigated by first-principles calculations, using an all electron methodology. The results on stability, spin configurations, formation and transition energies, local magnetic moments, and hyperfine parameters were compared to available theoretical and experimental data. The results indicated that transition metal impurities are energetically more favorable in lattice sites with carbon atoms as their first nearest neighbors, in both substitutional and interstitial configurations, which results from the larger electronegativity of carbon with respect to that of silicon. The analysis of the electronic properties of those impurity centers showed that they could stay in several stable charge states, depending on the Fermi energy level position within the host SiC bandgap. Additionally, by computing the p-d exchange coupling constant, which is related to a spin polarization in the SiC valence band top, we explored the possibility of achieving macroscopic magnetism in SiC. The results indicated that some centers, in both substitutional and interstitial configurations, present reasonably strong magnetic couplings to mediate macroscopic magnetism at high temperatures, which may generate spin polarized currents, leading to applications in spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transmission electron microscopy studying of structural features of NiTi B2 phase formed under pulsed electron-beam impact

By transmission electron microscopy method the evolution of structural-phase states on a depth of close to equiatomic NiTi modified layer has been studied. Modification performed by pulse impact on its surface low-energy high-current electron beam (beam energy density 10 J/sm{sup 2}, 10 pulses, pulse duration 50mks). It is established that during the treatment in the layer thickness of 8–10 μm, the melting of primary B2 phase and contained therein as Ti2Ni phase particles occurs. The result is change in the concentration ratio of titanium and nickel in the direction of increasing titanium content, which was confirmed by X-ray analysis in the form of increased unit cell parameter B2 phase. Analysis of the electron diffraction pattern showed that the modified layer is characterized as a highly distorted structure on the basis of bcc lattice. Lattice distortions are maximal near the surface and extends to a depth of melt. In subjacent layer there is gradual decline lattice distortions is observed.

36 MATERIALS SCIENCE↗

First-Principles Simulations Correlating X-ray Absorption Spectroscopy Features to Point Defects in h -BN

Hexagonal boron nitride (h-BN) is a promising material for a range of emerging applications in electronics, quantum information technology, and energy storage. Soft X-ray absorption spectroscopy (XAS) is powerful to reveal atomic details of BN, especially in the presence of defects. However, correlating XAS spectral features with specific defect types remains elusive. In this Letter, we report B K-edge XAS measurements of sputter-deposited turbostratic h-BN films and use a combination of first-principles spectroscopic simulations and analysis of detailed electronic structure and local charge transfer characteristics to elucidate their unique spectroscopic features. Our results show that the two main defect-related peaks, between the main π* resonances of h-BN and B2O3, as typically observed in BN films deposited by energetic condensation or bombarded with energetic ions, are associated with electronic states of H-passivated B atoms bonded to one and two oxygen impurity atoms, respectively. These conclusions hold significant implications for applications relying on defect-mediated properties of h-BN.

chemical structure↗

Structural, electronic, and magnetic properties of Ni nanoparticles supported on the TiC(001) surface

Metals supported on transition metal carbides are known to exhibit good catalytic activity and selectivity, which is interpreted in terms of electron polarization induced by the support. In the present work we go one step further and investigate the effect that a titanium carbide (TiC) support has on the structural, electronic, and magnetic properties of a series of Ni nanoparticles of increasing size exhibiting a two- or three-dimensional morphology. Furthermore, the obtained results show that three-dimensional nanoparticles are more stable and easier to form than their homologous two-dimensional counterparts. Also, comparison to previous results indicates that, when used as the support, transition metal carbides have a marked different chemical activity with respect to oxides. The analysis of the magnetic moments of the supported nanoparticles evidences a considerable quenching of the magnetic moment that affects mainly the Ni atoms in close contact with the TiC substrate indicating that these atoms are likely to be responsible for the catalytic activity reported for these systems. Overall, the analysis of the electronic structure reveals the existence of chemical interactions between the Ni nanoparticles and the TiC support, even if the net charge transfer between both systems is negligible.

36 MATERIALS SCIENCE↗

Preparation & characterization of SiO{sub 2} interface layer by dip coating technique on carbon fibre for C{sub f}/SiC composites

Carbon fibres (C{sub f}) are one of the most important reinforced materials for ceramic matrix composites such as C{sub f} - SiC composites and they are generally sought for high temperature applications in as space application, nuclear reactor and automobile industries. But the major problem arise when C{sub f} reinforced composites exposed to high temperature in an oxidizing environment, C{sub f} react with oxygen and burnt away. In present work, we have studied the effect of silica (SiO{sub 2}) coating as a protective coating on C{sub f} for the C{sub f} / SiC composites. The silica solution prepared by the sol-gel process and coating on C{sub f} is done by dip coating technique with varying the withdrawing speed i.e. 2, 5, 8 mm/s with fixed dipping cycle (3 Nos.). The uniform silica coating on the C{sub f} is shown by the Scanning Electron Microscope (SEM) analysis. The tensile test shows the increase in tensile strength with respect to increase in withdrawing speed. The isothermal oxidation analysis confirmed enhancement of oxidation resistance of silica coated C{sub f} as compared tothe uncoated C{sub f}.

36 MATERIALS SCIENCE↗

Ferromagnetic-to-Paramagnetic Phase Transition of MnAs Studied by Calorimetry and Magnetic Measurements

Manganese monoarsenide samples have been prepared by the sealed-ampule technique and characterized by X-ray diffraction, differential thermal analysis, and scanning electron microscopy. The hexagonal- to-orthorhombic phase transition of MnAs has been studied using differential scanning calorimetry (DSC) and magnetic measurements. The enthalpy and temperature range of the transition have been determined to be ΔH =–5.6 J/g and 312.5–319 K, respectively. The enthalpy and temperature range of the transition are influenced by the quality of the samples. The samples containing inclusions of the metastable, orthorhombic phase have a lower enthalpy and broader temperature range of the magnetostructural transformation of manganese monoarsenide. It has been demonstrated that DSC is an effective tool for assessing the quality of MnAs samples. Temperature dependences of specific magnetization and magnetic permeability for MnAs lend support to the DSC results. From these data, the Curie temperature of MnAs has been determined to be 40°C, in good agreement with previously reported data.

36 MATERIALS SCIENCE↗