Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic transformers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Shake-Down Spectroscopy as State- and Site-Specific Probe of Ultrafast Chemical Dynamics

Tracking the multifarious ultrafast electronic and structural changes occurring in a molecule during a photochemical transformation is a challenging endeavor that benefits from recent experimental and computational progress in time-resolved techniques. Measurements of valence electronic states, which provide a global picture of the bonding structure of the molecule, and core electronic states, which provide insight into the local environment, traditionally require different approaches and are often studied separately. Here, we demonstrate that X-ray pulses from a seeded free-electron laser (FEL) enable the measurement of high-resolution, time-resolved X-ray photoelectron spectra (XPS) that capture weak satellite states resulting from shake-down processes in a valence-excited molecule. This approach effectively combines the advantages of both valence- and core-state investigations. We applied this method to investigate photoexcited CS2 molecules, where the role of internal conversion (IC) and intersystem crossing (ISC) in determining the predissociation dynamics is controversial. We present XPS spectra from photoexcited CS2, obtained at the FERMI FEL. High-resolution measurements, compared to the corresponding spectra obtained from accurate multireference quantum chemical calculations, reveal that shake-down satellite channels are highly sensitive to both valence electronic and geometric changes. Previous studies of the predissociation dynamics have led to uncertain assignments of the branching between singlet and triplet excited states. We derive a propensity rule that demonstrates the spin-selectivity of the shake-downs. This selectivity allows us to unequivocally assign contributions from the bright and dark singlet excited states, with populations tracked along the predissociation dynamic pathway.

Thompson, Henry J. [Univ. of Southampton (United K↗

Correlation of optical properties and temperature-induced irreversible phase transitions in europium-doped yttrium carbonate nanoparticles

Nanophase europium-doped yttrium carbonate precursors are subjected to heat treatments, ranging from 300 Degree-Sign C to 1100 Degree-Sign C for dwell times of 5 min, 30 min, and 180 min. XRD, TEM, FT-IR, fluorescence, fluorescence excitation, and fluorescence lifetime measurements are used to characterize the materials. Upon heating, the material transitions through several amorphous stages until it reaches the crystalline cubic Y{sub 2}O{sub 3} phase. DSC measurements show an exothermic transition at 665.7 Degree-Sign C, indicating the formation of crystalline Y{sub 2}O{sub 3}. The grain size development is fitted by the relaxation equation and yields an activation energy of 50.3 kJ/mol. The amorphous phases are characterized by inhomogenously broadened optical spectra. Heating up to 700 Degree-Sign C leads to an increased fluorescence lifetime (from about 1 ms to 2.4 ms). As the material is heated to higher temperatures and completes the formation of the crystalline cubic Y{sub 2}O{sub 3} phase, the optical spectra become narrower and the fluorescence lifetime decreases to about 1.2 ms. - Graphical abstract: Fluorescence lifetimes of Eu-doped Y{sub 2}O{sub 3} precursors heated for 5, 30, and 180 min to various temperatures. Highlights: Black-Right-Pointing-Pointer Irreversible phase transitions in nanoparticles are of interest for thermometry. Black-Right-Pointing-Pointer Eu-doped nanophase yttrium carbonate precursors were heat-treated. Black-Right-Pointing-Pointer The material undergoes decomposition and crystallization. Black-Right-Pointing-Pointer Morphological and optical properties are measured. Black-Right-Pointing-Pointer Optical properties can be used to deduce the temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resistive sensing of gaseous nitrogen dioxide using a dispersion of single-walled carbon nanotubes in an ionic liquid

Graphical abstract: Ionic liquid ([C6-mim]PF6) used as dispersant agent for SWCNTs: An investigations were carried out to find the structural quality and surface modification for sensor application. - Highlights: • An effective technique based on Ionic liquids (IL) and their use as a dispersant. • Electron microscopy and spectroscopy for structure characterization. • Covalent linkage of ILs with SWNTs and dispersion of SWCNTs. • The IL-wrapped sensing film, capable for detecting trace levels of gas. - Abstract: Single-walled carbon nanotubes (SWCNTs) were dispersed in an imidazolium-based ionic liquid (IL) and investigated in terms of structural quality, surface functionalization and inter-CNT force. Analysis by field emission electron microscopy and transmission electron microscopy shows the IL layer to coat the SWNTs, and FTIR and Raman spectroscopy confirm strong binding of the ILs to the SWNTs. Two kinds of resistive sensors were fabricated, one by drop casting of IL-wrapped SWCNTs, the other by conventional dispersion of SWCNTs. Good response and recovery to NO{sub 2} is achieved with the IL-wrapped SWCNTs material upon UV-light exposure, which is needed because decrease the desorption energy barrier to increase the gas molecule desorption. NO{sub 2} can be detected in the 1–20 ppm concentration range. The sensor is not interfered by humidity due to the hydrophobic tail of PF6 (ionic liquid) that makes our sensor highly resistant to moisture.

36 MATERIALS SCIENCE↗

Thermodynamic and mechanical stabilities of α- and β-Ta{sub 4}AlC{sub 3} via first-principles investigations

Recently, it has been predicted that Ta{sub 4}AlC{sub 3} is likely to exhibit an (α–β) polymorphic transformation at temperatures above 1873 K. However, recent X-ray diffraction and transmission electron microscopy experiments suggest on the other hand that the α phase remains stable up to temperatures close to the limit of experimental capabilities and no transition has yet been observed. While the matter has already been settled experimentally, in this work, we re-investigate the phase stability problem in Ta{sub 4}AlC{sub 3} by using first-principles methods. The study was carried out by considering both thermodynamic and mechanical stabilities of the Ta{sub 4}AlC{sub 3} polymorphs. Particularly, finite-temperature Gibbs free energies and elastic properties of the polymorphs were calculated using density functional theory. Calculation results reveal that the α phase continue to be stable even at temperatures exceeding 1875 K, which is in agreement with experimental results reported in literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong domain configuration dependence of the nonlinear dielectric response in (K,Na)NbO{sub 3}-based ceramics

The nonlinear dielectric response in (Na{sub 0.52}K{sub 0.4425}Li{sub 0.0375})(Nb{sub 0.92−x}Ta{sub x}Sb{sub 0.08})O{sub 3} ceramics with different amounts of Ta was measured using subcoercive electric fields and quantified by the Rayleigh model. The irreversible extrinsic contribution, mainly caused by the irreversible domain wall translation, was strongly dependent on the domain configuration. The irreversible extrinsic contributions remained approximately the same within the single-phase regions, either orthorhombic or tetragonal, due to the similar domain morphology. However, in the polymorphic phase transition region, the domain wall density was increased by minimized domain size, as observed by transmission electron microscopy. This resulted in constrained domain wall motion due to self-clamping and reduced the irreversible extrinsic contribution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DISSOCIATIVE RECOMBINATION MEASUREMENTS OF HCl{sup +} USING AN ION STORAGE RING

We have measured dissociative recombination (DR) of HCl{sup +} with electrons using a merged beams configuration at the TSR heavy-ion storage ring located at the Max Planck Institute for Nuclear Physics in Heidelberg, Germany. We present the measured absolute merged beams recombination rate coefficient for collision energies from 0 to 4.5 eV. We have also developed a new method for deriving the cross section from the measurements. Our approach does not suffer from approximations made by previously used methods. The cross section was transformed to a plasma rate coefficient for the electron temperature range from T = 10 to 5000 K. We show that the previously used HCl{sup +} DR data underestimate the plasma rate coefficient by a factor of 1.5 at T = 10 K and overestimate it by a factor of three at T = 300 K. We also find that the new data may partly explain existing discrepancies between observed abundances of chlorine-bearing molecules and their astrochemical models.

74 ATOMIC AND MOLECULAR PHYSICS↗

Crystal Morphology and Phase Transformation of LiAlO 2 : Combined Experimental and First-Principles Studies

Layered α-LiAlO 2 matrix often suffers from detrimental structural and morphological changes during its lifetime, especially under H 2 containing fuel inlet environments of molten carbonate fuel cell systems. However, the underlying mechanism of this phase and morphological transformations has rarely been explored. In this study, transmission electron microscopy (TEM) techniques were used to determine the changes in structure and morphology of LiAlO 2 samples lifted by a focused ion beam (FIB). In accordance with X-ray diffraction (XRD) analysis, TEM images show that under H-rich conditions the rhombohedral α-LiAlO 2 transforms to tetragonal γ-LiAlO 2 phase with the appearance of the (101) terminated octahedral shaped γ-LiAlO 2 crystallites. We further support, and plausibly rationalize, the observed transformations using density functional theory (DFT) calculation. The DFT computed surface energies of γ-LiAlO 2 reveal that the {101} surface becomes the lowest energy surface upon H-adsorption, thus leading to formation of observed octahedral geometry. Contrary to stabilization of γ-LiAlO 2 surfaces upon H passivation, DFT revealed H-adsorption on α-LiAlO 2 surfaces to be energetically unfavorable. Furthermore, this contrasting behavior of α-LiAlO 2 and γ-LiAlO 2 under H-rich environments could be a potential driving force for the observed α-LiAlO 2 to γ-LiAlO 2 phase transformation.

36 MATERIALS SCIENCE↗

X-ray diffraction measurement of cosolvent accessible volume in rhombohedral insulin crystals

We report x-ray crystallographic measurement of the number of solvent electrons in the unit cell of a protein crystal equilibrated with aqueous solutions of different densities provides information about preferential hydration in the crystalline state. Room temperature and cryo-cooled rhombohedral insulin crystals were equilibrated with 1.2 M trehalose to study the effect of lowered water activity. The native and trehalose soaked crystals were isomorphous and had similar structures. Including all the low resolution data, the amplitudes of the structure factors were put on an absolute scale (in units of electrons per asymmetric unit) by constraining the integrated number of electrons inside the envelope of the calculated protein density map to equal the number deduced from the atomic model. This procedure defines the value of F(0 0 0), the amplitude at the origin of the Fourier transform, which is equal to the total number of electrons in the asymmetric unit (i.e. protein plus solvent). Comparison of the F(0 0 0) values for three isomorphous pairs of room temperature insulin crystals, three with trehalose and three without trehalose, indicates that 75 ± 12 electrons per asymmetric unit were added to the crystal solvent when soaked in 1.2 M trehalose. If all the water in the crystal were available as solvent for the trehalose, 304 electrons would have been added. Thus, the co-solvent accessible volume is one quarter of the total water in the crystal. Finally, determination of the total number of electrons in a protein crystal is an essential first step for mapping the average density distribution of the disordered solvent.

59 BASIC BIOLOGICAL SCIENCES↗

Enhanced Magneto-optical and Antibacterial Studies of Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.15)) Nanoparticles

Mg-doped BiFeO{sub 3} (Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.00 ≤ x ≤ 0.15)) nanoparticles (NPs) have been successfully prepared by simple solution combustion method using urea as fuel. The obtained product was sintered at 550 °C for 2 h to get pure-phase formation. The as-prepared samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), ultraviolet–visible (UV-Vis) absorption, photoluminescence (PL) spectra, and vibrating sample magnetometer (VSM) analysis. Powder XRD study revealed that all products exhibit rhombohedral structure with pure-phase formation. The average crystallite size of the samples decreased from 56.25 to 46.15 nm with increasing the concentration of Mg (x = 0.00, 0.05, 0.10, and 0.15). Surface morphology of the samples were analyzed by FE-SEM and TEM micrograph techniques, and the grain distribution was not quite homogeneous and observed agglomeration of the particles, which is mainly due to the magnetic interaction among them. EDX analysis confirmed the presence of Bi, Fe, O, and Mg elements without any form of impurity peak in all products. PL spectra shows a high intense peak at 464 nm, which is attributed to blue emission. The saturation magnetization is enhanced with increasing Mg doping level at RT. Antibacterial activity of Bi{sub 1−x}Mg{sub x}FeO{sub 3} NPs was found to be enhanced with increase in Mg doping concentration as it causes a reduction in the grain size of the samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photocatalytic activity of 3D flower-like MoS2 hemispheres

Highlights: • The ultrathin MoS{sub 2} nano-sheet assembled 3D flower-like MoS{sub 2} hemispheres were prepared via hydrothermal method. • The bandgap of as-synthesized MoS{sub 2} is about 2.05 eV, resulting in a broad absorption in the visible range. • The photocatalyst of MoS{sub 2} present the optimal catalytic property under mild acidity. - Abstract: The novel 3D flower-like MoS{sub 2} hemispheres assembled by ultrathin MoS{sub 2} nano-sheet petals have been successfully prepared via a facile hydrothermal method using CTAB as surfactant. The crystal structure and morphology of the as-synthesized MoS{sub 2} samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), Raman spectra and scanning electron microscopy (SEM). Moreover the microstructure and the optical properties of MoS{sub 2} samples were also measured by transmission electron microscopy (TEM) and the UV–vis diffuse reflectance spectra (DRS). The photocatalytic performance of the flower-like MoS{sub 2} hemispheres were evaluated through the degradation of Rhodamine (RhB) and methylene blue (MB) solutions, and the stabilities of photo-catalysts were also studied through the three cycles of experiments. The effects on photo-catalytic performance from the initial pH values (3–9) of RhB and MB solutions were also investigated, indicating the samples present the optimal catalytic property at pH = 5.

36 MATERIALS SCIENCE↗

Microscopic Characterization of Carbonaceous Aerosol Particle Aging in the Outflow from Mexico City

The physical and chemical transformations of particles aged in the outflow from Mexico City were investigated for the transport event of 22 March 2006. This study was part of the Megacities Initiative: Local and Global Research Observations (MILAGRO) 2006 field campaign. A detailed chemical analysis of individual particles was performed using a combination of complementary spectro-microscopic techniques. These techniques included scanning transmission X-ray microscopy (STXM) coupled with near edge X-ray absorption fine structure spectroscopy (NEXAFS) and computer controlled scanning electron microscopy with an energy dispersive X-ray analyzer (CCSEM/EDX). As the aerosol plume evolves from the city center, the organic mass per particle increases and the fraction of carbon-carbon double bonds (associated with elemental carbon) decreases. Organic functional groups enhanced with age include: carboxylic acids, alkyl groups, and oxygen bonded alkyl groups. At the city center (T0) the most prevalent aerosol type contained inorganic species (composed of sulfur, nitrogen, oxygen, and potassium) coated with organic material. At the T1 and T2 sites, located northeast of T0 (~29 km and ~65 km, respectively), the fraction of homogenously mixed organic particles increased in both size and number. These observations illustrate the evolution of the physical mixing state and organic bonding in individual particles in a photochemically active environment.

54 ENVIRONMENTAL SCIENCES↗

Deposition studies and coordinated characterization of MOCVD YBCO films on IBAD-MgO templates.

A recently installed research metal organic chemical vapor deposition (MOCVD) system at Oak Ridge National Laboratory, provided by SuperPower, Inc., has been used to investigate the processing variables of MOCVD YBCO precursors and trends in the resulting properties. Systematic studies of film growth were carried out by optimizing deposition temperature and oxygen flow rate. Structural and superconducting properties of the YBCO films were analyzed by extensive X-ray diffraction, scanning electron microspcopy and transport measurements. The identification of intermediate phase formations after the YBCO precursor transformation was investigated with coordinated reel-to-reel Raman microprobe analysis. With the combination of these characterization techniques, an improved understanding of the growth characteristics of MOCVD YBCO films was established. Finally, critical current densities greater than 2 MA/cm2 for film thicknesses of 0.8 m have been demonstrated.

36 MATERIALS SCIENCE↗

Solid-State Transformation of an Additive Manufactured Inconel 625 Alloy at 700 °C

Inconel 625, a nickel-based superalloy, has drawn much attention in the emerging field of additive manufacturing (AM) because of its excellent weldability and resistance to hot cracking. The extreme processing condition of AM often introduces enormous residual stress (hundreds of MPa to GPa) in the as-fabricated parts, which requires stress-relief heat treatment to remove or reduce the internal stresses. Typical residual stress heat treatment for AM Inconel 625, conducted at 800 °C or 870 °C, introduces a substantial precipitation of the δ phase, a deleterious intermetallic phase. In this work, we used synchrotron-based in situ scattering and diffraction methods and ex situ electron microscopy to investigate the solid-state transformation of an AM Inconel 625 at 700 °C. Our results show that while the δ phase still precipitates from the matrix at this temperature, its precipitation rate and size at a given time are both smaller when compared with their counterparts during typical heat treatment temperatures of 800 °C and 870 °C. A comparison with thermodynamic modeling predictions elucidates these experimental findings. Our work provides the rigorous microstructural kinetics data required to explore the feasibility of a promising lower-temperature stress-relief heat treatment for AM Inconel 625. The combined methodology is readily extendable to investigate the solid-state transformation of other AM alloys.

36 MATERIALS SCIENCE↗

Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes

Despite their relatively high capacity, layered lithium transition metal oxides suffer from crystal and interfacial structural instability under aggressive electrochemical and thermal driving forces, leading to rapid performance degradation and severe safety concerns. In this paper, we report a transformative approach using an oxidative chemical vapour deposition technique to build a protective conductive polymer (poly(3,4-ethylenedioxythiophene)) skin on layered oxide cathode materials. The ultraconformal poly(3,4-ethylenedioxythiophene) skin facilitates the transport of lithium ions and electrons, significantly suppresses the undesired layered to spinel/rock-salt phase transformation and the associated oxygen loss, mitigates intergranular and intragranular mechanical cracking, and effectively stabilizes the cathode-electrolyte interface. This approach remarkably enhances the capacity and thermal stability under high-voltage operation. Building a protective skin at both secondary and primary particle levels of layered oxides offers a promising design strategy for Ni-rich cathodes towards high-energy, long-life and safe lithium-ion batteries.

25 ENERGY STORAGE↗

Hartree–Fock–Bogoliubov theory for number-parity-violating fermionic Hamiltonians

It is usually asserted that physical Hamiltonians for fermions must contain an even number of fermion operators. This is indeed true in electronic structure theory. However, when the Jordan–Wigner (JW) transformation is used to map physical spin Hamiltonians to Hamiltonians of spinless fermions, terms that contain an odd number of fermion operators may appear. The resulting fermionic Hamiltonian thus does not have number parity symmetry and requires wave functions that do not have this symmetry either. In this work, we discuss the extension of standard Hartree–Fock–Bogoliubov (HFB) theory to the number-parity-nonconserving case. These ideas had appeared in the literature before but, perhaps for lack of practical applications, had, to the best of our knowledge, never been employed. We here present a useful application for this more general HFB theory based on coherent states of the SO(2M + 1) Lie group, where M is the number of orbitals. Here, we also show how using these unusual mean-field states can provide significant improvements when studying the JW transformation of chemically relevant spin Hamiltonians.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of annealing on the transformation and the microstructure of Mn{sub 1−x}Cr{sub x}CoGe alloys

In this work the effect of different thermal treatments on the transformation behavior of Mn{sub 1−x}Cr{sub x}CoGe alloys, with x = 0.15 and 0.20 has been analyzed. The changes in the transformation temperatures have been studied by differential scanning calorimetry (DSC). The results show that the structural transition temperature depends on the previous annealing. However, under the same heat treatment no significant change is observed on the transformation temperatures when replacing Mn by Cr. The microstructural evolution has been monitored using in-situ X-ray diffraction and transmission electron microscopy. The effect of an applied magnetic field on the transformation has been explored by SQUID magnetometry. Two different magnetic transitions are found: a first order paramagnetic (PM) to ferromagnetic (FM) corresponding to the transformation observed by calorimetry and a re-entrant spin glass to ferromagnetic transition. - Highlights: • The annealing conditions determine the magnetostructural transition. • A laminar microstructure along preferential planes observed by TEM • A RSG to ferromagnetic transition at low temperatures is detected.

36 MATERIALS SCIENCE↗

Synthesis of flower-like Boehmite (γ-AlOOH) via a one-step ionic liquid-assisted hydrothermal route

A simple and novel synthesis process, one-step ionic liquid-assisted hydrothermal synthesis route, has been developed in the work to synthesize Bohemithe (γ-AlOOH) with flower-like structure. The samples were characterized by X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscope (SEM). Ionic liquid [Omim]{sup +}Cl{sup −}, as a template, plays an important role in the morphology and pore structure of the products due to its strong interactions with reaction particles. With the increase in the dosage of ionic liquid [Omim]{sup +}Cl{sup −}, the morphology of the γ-AlOOH was changed from initial bundles of nanosheets (without ionic liquid) into final well-developed monodispersed 3D flower-like architectures ([Omim]{sup +}Cl{sup −}=72 mmol). The pore structure was also altered gradually from initial disordered slit-like pore into final relatively ordered ink-bottle pore. Furthermore, the proposed formation mechanism and other influencing factors such as reaction temperature and urea on formation and morphology of the γ-AlOOH have also been investigated. - Graphical abstract: The flower-like γ-AlOOH architectures composed by nanosheets with narrow size distribution (1.6–2.2 μm) and uniform pore size (6.92 nm) have been synthesized via a one-step ionic liquid-assisted hydrothermal route. - Highlights: • The γ-AlOOH microflowers were synthesized via an ionic liquid-assisted hydrothermal route. • Ionic liquid plays an important role on the morphology and porous structure of the products. • Ionic liquid can be easily removed from the products and reused in recycling experiments. • A “aggregation–recrystallization–Ostwald Ripening“formation mechanism may occur.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A battery-operated, stabilized, high-energy pulsed electron gun for the production of rare gas excimers

We report on the design of a new type of hot-filament electron gun delivering fairly high current (a few hundreds of {mu} A) at high voltage (up to 100 kV) in continuous or pulsed mode. Its novel features are that the filament is heated by means of a pack of rechargeable batteries floated atop the high-voltage power supply in order to get rid of bulky isolation transformers, and that the filament current and, hence, the electron gun current, is controlled by a feedback circuit including a superluminescent diode decoupled from the high voltage by means of an optical fiber. This electron gun is intended for general purposes, although we have especially developed it to meet the needs of our experiment on the infrared emission spectroscopy of rare gas excimers. Our experiment requires that the charge injection into the sample is pulsed and constant and stable in time. The new electron gun can deliver several tens of nC per pulse of electrons of energy up to 100 keV into the sample cell. The new design also eliminates ripples in the emission current and ensures up to 12 h of stable performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗