Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “efficiencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Organic Photovoltaic Efficiency Predictor: Data-Driven Models for Non-Fullerene Acceptor Organic Solar Cells

In the design of organic solar cells, there has been a need for materials with high power conversion efficiencies. Scharber’s model is commonly used to predict efficiency; however, it exhibits poor performance with new non-fullerene acceptor (NFA) devices, since it was designed for fullerene-based devices. In this work, an empirical model is proposed that can be a more accurate alternative for NFA organic solar cells. Additionally, many screening studies use computationally expensive methods. A model based on using semiempirical simplified time-dependent density functional theory (sTD-DFT) as an alternative method can accelerate the calculations and yield a similar accuracy. The models presented in this paper, termed organic photovoltaic efficiency predictor (OPEP) models, have shown significantly lower errors than previous models, with OPEP/B3LYP yielding errors of 1.53% and OPEP/sTD- DFT of 1.55%. As a result, the proposed computational models can be used for the fast and accurate screening of new high-efficiency NFAs/donor pairs.

14 SOLAR ENERGY↗

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell

The development of membranes with low fuel crossover and high fuel efficiency is a key issue in direct borohydride fuel cells (DBFCs). In previous work, we produced a poly(vinyl alcohol) (PVA)-anion-exchange resin (AER) membrane with a low fuel crossover and a low fuel efficiency by introducing Co ions. In this work, a bilayer membrane was designed to improve the fuel efficiency and cell performance. The bilayer membrane was prepared by casting a PVA-AER wet gel onto the partially desiccated Co-PVA-AER gel. The bilayer membrane showed a borohydride permeability of 1.34 × 10 –6 cm 2 ·s –1 , which was even lower than that of the Co-PVA-AER membrane (1.98 ×10 –6 cm 2 ·s –1 ) and the PVA-AER membrane (2.80 × 10 –6 cm 2 ·s –1 ). The DBFC using the bilayer membrane exhibited a higher fuel efficiency (37.4%) and output power (1.73 Wh) than the DBFCs using the Co-PVA-AER membrane (33.3%, 1.27 Wh) and the PVA-AER membrane (34.3%, 1.2 Wh). Furthermore, the DBFC using the bilayer membrane achieved a peak power density of 327 mW·cm –2 , which was 2.14 times of that of the DBFC using the PVA-AER membrane (153 mW·cm –2 ). Finally, the drastic improvement benefited from the bilayer design, which introduced an interphase to suppress fuel crossover and avoided unnecessary borohydride hydrolysis.

36 MATERIALS SCIENCE↗

Carbon Electrode with Sputtered Au Coating for Efficient and Stable Perovskite Solar Cells

Halide perovskite solar cells (PSCs) represent a low-cost and high-efficiency solar technology. However, most of the highly efficient PSCs need a noble electrode, such as Au, through thermal evaporation. Here it is reported that a sputtered Au electrode on a PSC could damage the organic hole transport layer (HTL) and the perovskite layer. Here, we report a simple, yet effective sputtered gold nanoparticle decorated carbon electrode to fabricate efficient and stable planar PSCs. The sputtered Au layer on the doctor-bladed coated carbon electrode can be directly applied to the perovskite semicells by mechanical stacking. By optimizing the gold thickness, a power conversion efficiency (PCE) of 16.87% was obtained for the composite electrode-based PSC, while the reference device recorded a PCE of 12.38%. The composite electrode-based device demonstrated 96% performance retention after being stored under humid conditions (50-60%) without encapsulation for ~100 h. This demonstrates a promising pathway toward the commercialization of large-scale manufacturable sputtered electrodes for the PSC solar module.

14 SOLAR ENERGY↗

Catalytic Resonance Theory: Turnover Efficiency and the Resonance Frequency

Programmable catalysts exhibiting forced oscillation in the free energy of reacting surface species were simulated to understand the general mechanisms leading to efficient use of the input energy. Catalytic ratchets with either positive or negative adsorbate scaling exhibited oscillation conditions of both high and low turnover efficiency, yielding catalytic turnover frequencies either close to or significantly lower than the applied catalyst oscillation frequency, respectively. The “effective rate”, defined as the product of the catalytic turnover frequency and the turnover efficiency (ηTOE), was limited via two catalytic mechanisms: a leaky catalytic ratchet existed when molecules repeatedly traversed backward through the catalytic transition state upon catalyst oscillation, while a catalytic ratchet with low surface participation exhibited reduced formation of a gas-phase final product due to low surface product coverage. Furthermore, a single applied frequency yielding a maximum effective catalytic rate defined as the “resonance frequency” provided maximum combined benefit for catalytic rate and efficiency.

25 ENERGY STORAGE↗

Contribution of Partial Charge Interactions and Base Stacking to the Efficiency of Primer Extension at and beyond Abasic Sites in DNA

During DNA synthesis, base stacking and Watson-Crick (WC) hydrogen bonding increase the stability of nascent base pairs when they are in a ternary complex. To evaluate the contribution of base stacking to the incorporation efficiency of dNTPs when a DNA polymerase encounters an abasic site, we varied the penultimate base pairs (PBs) adjacent to the abasic site using all 16 possible combinations. We then determined pre-steady-state kinetic parameters with an RB69 DNA polymerase variant and solved nine structures of the corresponding ternary complexes. The efficiency of incorporation for incoming dNTPs opposite an abasic site varied between 2- and 210-fold depending on the identity of the PB. We propose that the A rule can be extended to encompass the fact that DNA polymerase can bypass dA/abasic sites more efficiently than other dN/abasic sites. Crystal structures of the ternary complexes show that the surface of the incoming base was stacked against the PB's interface and that the kinetic parameters for dNMP incorporation were consistent with specific features of base stacking, such as surface area and partial charge-charge interactions between the incoming base and the PB. Without a templating nucleotide residue, an incoming dNTP has no base with which it can hydrogen bond and cannot be desolvated, so that these surrounding water molecules become ordered and remain on the PB's surface in the ternary complex. When these water molecules are on top of a hydrophobic patch on the PB, they destabilize the ternary complex, and the incorporation efficiency of incoming dNTPs is reduced.

08 HYDROGEN↗

A quantitative and spatially resolved analysis of the performance-bottleneck in high efficiency, planar hybrid perovskite solar cells

Hybrid perovskites represent a potential paradigm shift for the creation of low-cost solar cells. Current power conversion efficiencies (PCEs) exceed 22%. However, despite this, record PCEs are still far from their theoretical Shockley–Queisser limit of 31%. To increase these PCE values, there is a pressing need to understand, quantify and microscopically model charge recombination processes in full working devices. Here, we present a complete microscopic account of charge recombination processes in high efficiency (18–19% PCE) hybrid perovskite (mixed cation and methylammonium lead iodide) solar cells. We employ diffraction-limited optical measurements along with relevant kinetic modeling to establish, for the first time, local photoluminescence quantum yields, trap densities, trapping efficiencies, charge extraction efficiencies, quasi-Fermi-level splitting, and effective PCE estimates. Correlations between these spatially resolved parameters, in turn, allow us to conclude that intrinsic electron traps in the perovskite active layers limit the performance of these state-of-the-art hybrid perovskite solar cells.

14 SOLAR ENERGY↗

Efficiency of the Modular Neutron Array (MoNA)

The efficiency of the Modular Neutron Array (MoNA), located at the National Superconducting Cyclotron Laboratory (NSCL) at Michigan State University, was measured and compared to simulations. The Coulomb dissociation of a 90 MeV/u beam of {sup 11}Be in a gold target was used to produce neutrons. The expected neutron production rate was calculated using the virtual photon method. The measured efficiency agrees with the efficiency calculated with GEANT simulations. The current configuration of MoNA has a 73% intrinsic detection efficiency for 90 MeV neutrons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Efficiency enhancement in a single-pass Raman free electron laser

Efficiency enhancement in free electron laser (FEL) with ion channel and axial magnetic field is compared. By using Maxwell's equations and nonwiggler averaged equation of motion of electron beam, a set of coupled nonlinear differential equations is derived in the slowly varying amplitude and wave number approximation. Because of using nonwiggler averaged equation of motion, it is possible to treat the injection of the beam into the wiggler. The electron beam propagates with a relativistic velocity, ions are assumed immobile and slippage is ignored. The final set of nonlinear first-order differential equations describing the nonlinear evolution of the FEL is solved by the Runge-Kutta method. Efficiency enhancement in group I orbits is almost the same for both ion channel and axial magnetic field cases, with somewhat larger growth rate for the latter. In group II orbits, efficiency enhancement is not possible for the ion-channel guiding; however, the intrinsic efficiency can be larger than that of the axial magnetic field case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical study of efficiency for a 670 GHz gyrotron

In this paper, the results of the efficiency study of a 670 GHz gyrotron operating at TE{sub 31,8}-mode are presented. Calculations are performed by using the self-consistent nonstationary code MAGY. Three cavity configurations were examined. The effects of ohmic losses and electron velocity spread were included in the simulation. The results show that the output efficiency can reach 35% and the velocity spread in the electron beam does not degrade the operation significantly. Furthermore, we verified that the smoothing of the sharp corners for a small tapering angle would reduce mode conversion; the parasitic excitation of neighboring radial modes is less than 1% of the amplitude of the operating mode and the effect on efficiency is small. Lastly, the simulation results show that the after-cavity interaction causes only slight variations in the efficiency.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Highly Efficient Neutron Veto Using Boron-Loaded Liquid Scintillator

By surrounding a dark matter detector with a layer of boron-loaded liquid scintillator, a highly efficient neutron veto can be produced. In Monte Carlo studies, a one meter thick layer of scintillator has a veto efficiency greater than 99.5% for nuclear recoil events induced by radiogenic neutrons, and a veto efficiency of more than 95% for nuclear recoil events produced by cosmogenic neutrons. The use of boron-loaded scintillator both reduces the veto-induced dead time by decreasing the neutron capture time and allows high neutron detection efficiency to be achieved in a relatively compact geometry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast electron temperature and conversion efficiency measurements in laser-irradiated foil targets using a bremsstrahlung x-ray detector

Measurements of fast electron temperature and conversion efficiencies using bremsstrahlung x-rays emitted from laser-produced, fast electrons are presented. Experiments were carried out using the Titan laser (150 J, 1.5 ps) at the Lawrence Livermore National Laboratory. The maximum intensity was 2 x 10{sup 20} W/cm{sup 2} on 250 {mu}m thick silver foil targets. The emission of bremsstrahlung x-rays from the fast electrons in the target was measured using a filter-stack based detector. The conversion efficiency of laser energy into fast electrons and the electron temperature were studied as a function of incident laser energy. Several models of the electron divergence angle were investigated, and the effect of the assumed divergence angle on the inferred conversion efficiency was quantified. This allows for upper and lower bounds on the conversion efficiency to be established for a range of possible divergence angles. The value for upper bound is 60% (from a 75 deg. divergence angle model) and for the lower bound is 25% (from a 0 deg. divergence angle model).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High efficiency coaxial klystron-like relativistic backward wave oscillator with a premodulation cavity

The klystron-like relativistic backward wave oscillator (RBWO) combines the transition radiation with Cerenkov radiation and has demonstrated microwave output of high power and high efficiency. The coaxial slow wave structure device can produce microwave with a lower frequency in a smaller cross section. For the purpose of high efficiency, low frequency, and miniaturization, a coaxial klystron-like RBWO with a premodulation cavity is presented. Particle-in-cell simulations show that a microwave with power of 1.15 GW and frequency of 2.1 GHz is generated with conversion efficiency of 48%, whereas for the device with a reflector, the efficiency is 38%.

43 PARTICLE ACCELERATORS↗

Hole scavenger redox potentials determine quantum efficiency and stability of Pt-decorated CdS nanorods for photocatalytic hydrogen generation

We use Pt-decorated CdS nanorods for photocatalytic hydrogen generation in the presence of sacrificial hole scavengers. Both the quantum efficiency for hydrogen generation and the stability of the colloidal nanocrystals in solution improve with increasing redox potential of the hole scavenger. The higher redox potential leads to faster hole scavenging, which increases quantum efficiency and stability since electron hole recombination and oxidation of the CdS become less important. The quantum efficiencies can be tuned over more than an order of magnitude. This finding is important for choosing hole scavengers and for comparing efficiencies and stabilities for different photocatalytic nanosystems.

36 MATERIALS SCIENCE↗

Effect of strong electron correlation on the efficiency of photosynthetic light harvesting

Research into the efficiency of photosynthetic light harvesting has focused on two factors: (1) entanglement of chromophores, and (2) environmental noise. While chromophores are conjugated {pi}-bonding molecules with strongly correlated electrons, previous models have treated this correlation implicitly without a mathematical variable to gauge correlation-enhanced efficiency. Here we generalize the single-electron/exciton models to a multi-electron/exciton model that explicitly shows the effects of enhanced electron correlation within chromophores on the efficiency of energy transfer. The model provides more detailed insight into the interplay of electron correlation within chromophores and electron entanglement between chromophores. Exploiting this interplay is assisting in the design of new energy-efficient materials, which are just beginning to emerge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of an improved relativistic backward wave oscillator in efficiency and power capacity

Investigation of relativistic backward wave oscillator with high efficiency and power capacity is presented in this paper. To obtain high power and high efficiency, a TM{sub 021} mode resonant reflector is used to reduce the pulse shortening and increase power capacity to about 1.7 times. Meanwhile, an extraction cavity at the end of slow wave structure is employed to improve the efficiency from less than 30% to over 40%, through the beam-wave interaction intensification and better energy conversion from modulated electron beam to the electromagnetic field. Consistent with the numerical results, microwave with a power of 3.2 GW, a frequency of 9.75 GHz, and a pulse width of 27 ns was obtained in the high power microwave generation experiment, where the electron beam energy was configured to be {approx}910 kV and its current to be {approx}8.6 kA. The efficiency of the RBWO exceeds 40% at a voltage range of 870 kV-1000 kV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A high efficient relativistic backward wave oscillator with coaxial nonuniform slow-wave structure and depth-tunable extractor

A high efficient relativistic backward wave oscillator with coaxial nonuniform slow-wave structures (SWSs) and depth-tunable extractor is presented. The physical mechanism to increase the power efficiency is investigated theoretically and experimentally. It is shown that the nonuniform SWSs, the guiding magnetic field distribution, and the coaxial extractor depth play key roles in the enhancement of the beam-wave power conversion efficiency. The experimental results show that a 1.609 GHz, 2.3 GW microwave can be generated when the diode voltage is 890 kV and the beam current is 7.7 kA. The corresponding power efficiency reaches 33.6%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-dependent quantum efficiency of Ga(N,As,P) quantum wells

The photoluminescence quantum efficiencies of a series of Ga(N,As,P)/GaP multiple quantum wells are analyzed. The external quantum efficiencies are derived from the absorbed and the emitted light intensities measured using an integrating sphere mounted inside a closed-cycle helium cryostat. By taking into account the device layer sequences as well as internal reflections and reabsorption, the internal quantum efficiencies yield values above 90% for all samples at cryogenic temperatures. The temperature-dependence of the quantum efficiencies as a function of active quantum well layer design reveal the internal interfaces as remaining growth challenge in these heterostructures.

36 MATERIALS SCIENCE↗

A futuristic approach towards interface layer modifications for improved efficiency in inverted organic solar cells

Inverted polymer Solar Cells of the classical poly (3-hexylthiophene) (P3HT):(6,6)-phenyl-C{sub 61}butyric acid methyl ester (PC{sub 61}BM) blend on indium tin oxide substrates were fabricated, which shows improved device performance, by using a facile solution–processed ZnO-polyelectrolytes [poly (diallyldimethylammonium chloride) (PDADMAC), Poly (acrylic acid sodium salt) (PAS), poly (4-styrenesulfonic acid) (PSS), and Polyvinylpyrrolidone (PVP)] nanocomposite as a cathode interface layer compared to devices using pristine ZnO as cathode buffer layer in ambient conditions. The devices with different combinations of polyelectrolyte with ZnO show different improvements in the device efficiency. The combinations of ZnO with PVP and PDADMAC show highest amount of improvements in the efficiency by a factor of ∼17–19. The improvement of the efficiency may be due to various phenomena, such as the passivation of ZnO surface as well as bulk traps, work function modification, improved energy level alignment, improved electronic coupling of the inorganic/organic interface, improved light harvesting, and decrease of surface as well as bulk charge recombination in the device. The introduction of polyelectrolyte into ZnO inhibits the aggregation of ZnO nanoparticles yielding the large area ZnO nanoclusters; and hence, forming the uniform film of ZnO resulting in the modifications of morphology as well as electronic structure of ZnO-polyelectrolyte nano-composite favouring better electronic coupling between cathode and active layer and hence enhancing the current and, consequently, the efficiency. This simple low temperature ZnO-polyelectrolyte nanocomposite based protocol proposed for cathode interface layer modification may be very much useful for roll to roll industrial manufacturing of organic solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗