Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Steady supersonic Navier-Stokes solutions of a 75 deg delta wing

Steady solutions about a slender sharp edged delta wing in a supersonic freestream for moderate and high angles of attack are obtained numerically by time integration of the unsteady compressible three dimensional laminar Navier-Stokes equations. The main features of the flow, including primary and secondary separation, and vortex position and strength, are adequately simulated in the numerical solutions. Improved resolution of the computational grid in the leading edge region from a previous solution had considerable effect on the accuracy of the solutions. Good agreement between numerical solutions and experimental data was obtained for two cases. A local timestepping procedure is used to speed convergence by approximately a factor of two.

Buter, T. A.↗
NASA NTRS1986

Influence of airfoil mean loading on convected gust interaction noise

A theoretical model is developed for the noise generated when a convected vortical or entropic gust encounters an airfoil at nonzero angle of attack. The analysis is based on Rapid Distortion Theory. High frequency gusts, whose wavelengths are short compared to the airfoil chord, are considered. The noise generation is shown to be concentrated near the airfoil leading edge. The level of the generated noise is increased by airfoil mean loading, with the appropriate scaling parameter being the local leading edge incidence angle. The trailing edge simply scatters the leading edge sound field, and here the mean loading effects scale on the airfoil total lift. Calculations are presented which illustrate that, at high frequencies, moderate levels of airfoil steady loading can dramatically increase the noise produced by airfoil convected gust interactions.

Kerschen, E. J.↗
NASA NTRS1986

Low Aspect Ratio Wings at High Angles of Attack

A comprehensive evaluation is made of experimental data compiled to date for the flowfields and aerodynamic forces that occur at high angles of attack for low aspect ratio wings with delta, rectangular, clipped delta, and strake/wing planform geometries. Attention is given to wing leading edge-generated vortex breakdown, aspect ratio and compressibility effects, and strake vortex effects on main wing areas. Although the nonlinear effects created by a wing-body combination significantly alter wing-alone aerodynamics, the wing-alone data presented are vital to the development of prediction methodologies for large angle of attack aerodynamics.

R L Stallings Jr.↗
NASA NTRS1988

Star-forming instabilities of a decelerating plane-parallel slab of finite thickness

In order to study how supernova blast waves might catalyze star formation, the stability of a slab of decelerating gas of finite thickness is explored. Previous analyses are extended by applying shock-like boundary conditions to the leading edge of the slab and by studying the effects of arbitrary deceleration. Contrary to some earlier claims, it is found that blast waves can indeed accelerate the rate of star formation in the interstellar medium by compressing the interstellar gas and enabling it to cool. Also, it is demonstrated that in an incompressible fluid, the symmetric and antisymmetric modes in the case of zero acceleration transform continuously into Rayleigh-Taylor and gravity-wave modes as acceleration grows more important. The dynamical overstability of an isothermal shock wave and its implications for star formation are discussed.

Voit, G. Mark↗
NASA NTRS1988

Flow-field Survey of an Empennage Wake Interacting with a Pusher Propeller

The flow field between a model empennage and a 591-mm-diameter pusher propeller was studied in the Ames 7- by 10-Foot Wind Tunnel with directional pressure probes and hot-wire anemometers. The region probed was bounded by the empennage trailing edge and downstream propeller. The wake properties, including effects of propeller operation on the empennage wake, were investigated for two empennage geometries: one, a vertical tail fin, the other, a Y-tail with a 34 deg dihedral. Results showed that the effect of the propeller on the empennage wake upstream of the propeller was not strong. The flow upstream of the propeller was accelerated in the streamwise direction by the propeller, but the empennage wake width and velocity defect were relatively unaffected by the presence of the propeller. The peak turbulence in the wake near the propeller tip station, 0.66 diameter behind the vertical tail fin, was approximately 3 percent of the free-stream velocity. The velocity field data can be used in predictions of the acoustic field due to propeller-wake interaction.

Horne, W. Clifton↗
NASA NTRS1991

The BATSE SLED: The problem and the correction

The Burst And Transient Source Experiment (BATSE) has been in space for 4 months and, by anyone's reckoning, is performing better than even the most optimistic pre-flight predictions. That doesn't mean there haven't been some small surprises. Because of the discreteness of gamma-ray energies available to us in pre-flight testing, we could not subject the instrument to the continuous distribution of energies it now sees in space. Therefore, it was not until the beginning of mission operations that a small non-linearity was discovered in the low energy region of the SPD spectra. The nickname for this depression is the SLED (Spectroscopy Low-Energy Depression). Sample spectra for module 6 at two gains (1X and 0.4X) are given. Note that the position of the sled is gain-independent in channel space. A further study on a non-flight module discovered the cause lay in the spectroscopy analog electronics. Above a certain energy threshold, the digital signal from the SPEC-FAST2 discriminator causes, in effect, an extra small amount of charge to be added to the SHER analog input. The laboratory measurements of SHER output energy as a function of input energy are presented. The change of slope at the point of the SLED results in narrower bin widths for the channels in that region. The SLED is approximately 5 channels wide. It should be mentioned that below the SLED and for many decades above the SLED the response is extremely linear. The proposed fix was to move the lower straight line up to match the extrapolation of the upper straight line, shown by the dotted line. In effect, this means reassigning channel numbers. All channel edges lower than the SLED are moved a fixed amount to higher channel numbers. Channel edges in the SLED are moved a different amount depending on their position. The latter obviously results in narrower channel widths in energy space.

Lestrade, John Patrick↗
NASA NTRS1992

Starbursts in the nuclei of shell galaxies

Simulations of shell-forming galaxy mergers are reported in which gas and stars are tracked separately to study the implications of observations that indicate fine structures in elliptical galaxies. The hybrid N-body/hydrodynamics code by Hernquist and Katz (1989) is employed neglecting the self-gravity of galaxies in tidal disruptions by massive primaries of small dwarf galaxies. The evolution of the galactic debris is examined showing that the gas and stars are effectively segregated with the stars forming sharp-edged features and the gas forming disks in the nucleus of the primary. Star formation is theorized to occur in the nuclei of shell galaxies due to shocks in the gas, and the added presence of a black hole can lead to an active galactic nucleus. The simulation is of interest to the interpretation of such observations as those of NGC1275 in which dormant elliptical galaxies are activated by mergers between large galaxies and gas-rich satellites.

Hernquist, Lars↗
NASA NTRS1958

Boundary-Layer Transition on an Open-Nose Cone at Mach 3.1

Comparison of transition locations for an open-nose cone, a conventional sharp cone, and a hollow cylinder showed that transition locations on the open-nose cone and the hollow cylinder were identical but differed greatly from those on the sharp cone. This is believed to be caused by the essentially two-dimensional character of leading edge of the open-nose cone. Bluntness effects on the open-nose cone observed on the hollow cylinder. Transition 2.2 times the sharp-cone transition distance by blunting the tip.

Brinich, Paul F↗
NASA NTRS1993

Spatial patterns in backscatter strength across the Greenland Ice Sheet

The relationship between the physical properties of the Greenland ice sheet and Synthetic Aperture Radar (SAR) data collected from aircraft and from ERS-1 is addressed. Limited aircraft data are combined with a description of the glacier surface to predict qualitatively the spatial and seasonal variation in backscatter strength across the ice sheet. In particular the model predicts relatively low backscatter near the ice edge where scattering is dominated by rough surface effects. Backscatter increases through the lake zone as volume scattering becomes important. Strongest backscatter is found in the percolation facies where volume scatter from snow grains and volume scatter from large, buried ice bodies becomes important. Backscatter weakens in the interior ice sheet where fine grained snow is the only mechanism producing backscatter.

Jezek, K. C.↗
NASA NTRS1993

Evaporation and combustion of LOX under supercritical and subcritical conditions

The objective is to study the evaporation and combustion of LOX under supercritical and subcritical conditions both experimentally and theoretically. In the evaporation studies, evaporation rate and surface temperature were measured when LOX vaporizing in helium environments at pressures ranging from 5 to 68 atm. A Varian 3700 gas chromatograph was employed to measure the oxygen concentration above the LOX surface. For the combustion tests, high-magnification video photography was used to record direct images of the flame shape of a LOX/H2/He laminar diffusion flame. The gas composition in the post-flame region is also being measured with the gas sampling and chromatography analysis. These data are being used to validate the theoretical model. A comprehensive theoretical model with the consideration of the solubility of ambient gases as well as variable thermophysical properties was formulated and solved numerically to study the gasification and burning of LOX at elevated pressures. The calculated flame shape agreed reasonably well with the edge of the observed luminous flame surface. The effect of gravity on the flame structure of laminar diffusion flames was found to be significant. In addition, the predicted results using the flame-sheet model were compared with those based upon full equilibrium calculations (which considered the formation of intermediate species) at supercritical pressures. Except at the flame front where temperature exceeded 2,800 K, the flame-sheet and equilibrium solutions in terms of temperature distributions were in very close agreement. The temperature deviation in the neighborhood of the flame front is caused by the effect of high-temperature dissociation.

Yang, A. S.↗
NASA NTRS1994

Thermal continua of AGN accretion disks

We have computed the thermal continuum energy distribution of thermal radiation from the atmospheres of supermassive accretion disks around supermassive black holes. Non-LTE radiative transfer is combined with a model of the vertical structure at each radius appropriate to the low effective gravities of these disks. Locally, the Lyman edge of H can be in emission or absorption. When the emission is summed over the disk with Doppler and gravitational redshifts taken into account, the observed continuum typically shows little sign of a discontinuity near the Lyman edge. For relatively cool disks, the Lyman edge is in absorption, but it appears as a slope change extending over several hundred angstroms, rather than an abrupt discontinuity. Disks around Kerr black holes can explain the observed range of soft X-ray luminosities of AGN, but disks around Schwarzschild holes are much too faint in soft X-rays.

Shields, G. A.↗
NASA NTRS1993

ACE: A distributed system to manage large data archives

Competitive pressures in the oil and gas industry are requiring a much tighter integration of technical data into E and P business processes. The development of new systems to accommodate this business need must comprehend the significant numbers of large, complex data objects which the industry generates. The life cycle of the data objects is a four phase progression from data acquisition, to data processing, through data interpretation, and ending finally with data archival. In order to implement a cost effect system which provides an efficient conversion from data to information and allows effective use of this information, an organization must consider the technical data management requirements in all four phases. A set of technical issues which may differ in each phase must be addressed to insure an overall successful development strategy. The technical issues include standardized data formats and media for data acquisition, data management during processing, plus networks, applications software, and GUI's for interpretation of the processed data. Mass storage hardware and software is required to provide cost effective storage and retrieval during the latter three stages as well as long term archival. Mobil Oil Corporation's Exploration and Producing Technical Center (MEPTEC) has addressed the technical and cost issues of designing, building, and implementing an Advanced Computing Environment (ACE) to support the petroleum E and P function, which is critical to the corporation's continued success. Mobile views ACE as a cost effective solution which can give Mobile a competitive edge as well as a viable technical solution.

Daily, Mike I.↗
NASA NTRS2000

Use of Maps, GTE and UARS-MLS Data in Understanding Tropospheric Processes Critical to Model Development

Two of the major problems in using meteorological models to explain observed tropospheric trace constituent distributions and thereby to understand the global budgets of the tracers are to properly define the vertical layered structure in the free atmosphere, and to understand the contribution of advection processes in generating horizontal inhomogeneities at all scales. We proposed to tackle these problems through the examination of an extensive collection of trace constituent data from research and commercial aircraft in conjunction with meteorological data from the European Center for Medium-Range Weather Forecasts. The physical mechanisms responsible for these advection and layering processes were explored and their implications for theories and models assessed. In addition, we calculated examples of how thin layers (not currently resolved by models) affect the radiative heating/cooling rates. We developed an improved algorithm for trace constituent layer detection, and used it to analyze over 100,000 km of ozone and humidity vertical profiles collected by instruments piggybacked on commercial aircraft. We have also performed radiative heating/cooling calculations on some observed layer structures, and have demonstrated that the sharp edges on humidity layers can have strong local effects of self-stabilization (dry layers) or destabilization (wet layers), and have suggested that clear-air turbulence might result from the latter case through convective instability. We also systematically analyzed the mesoscale variabilities, not only of the trace constituents, but also of the aircraft-measured dynamical variables.

Newell, Reginald E.↗
NASA NTRS2000

Discharge Coefficients for Axisymmetric Supersonic Nozzles

Computational Fluid Dynamics (CFD) analysis was used to compute effective nozzle discharge coefficients for subscale sharp-edged converging/diverging nozzles, with a variety of convergence half-angles, motor operating conditions, and two propellants with different ballistics. Convergence half-angles ranged from 0 to 80 deg. Analysis was conducted at total temperatures from 2946K (5303R) to 3346K (6023R) and over total pressures ranged from 2.72 MPa (395 psia) to 20.68 MPa (3000 psia). Area ratios (A(sub e)/A*) ranged from 7.43 to 9.39. Ratio of specific heats (gamma) ranged from 1.13 to 1.18. Throat and exit Reynolds numbers were calculated to be 8.26 x 10(exp 5) and 5.51 x 10(exp 5), respectively. Present results of nozzle discharge coefficients are reported and correlated as a function of nozzle convergence half-angle (theta(sub c)) and area ratios (A(sub e)/A*) for a constant divergence half-angle (theta(sub d)) of 15 deg. Computed discharge coefficients ranged from 0.88 to 0.97. They are compared with theory and experimental data available in literature. Available turbulence models with respect to grid refinements and heat transfer are discussed.

Ahmad, Rashid A.↗
NASA NTRS1998

The Control of Compressible Dynamic Stall Using Adaptive Airfoils

Ongoing research has shown that compressible dynamic stall can be caused by vastly different mechanisms even for small changes in flow conditions. For example, at low Mach numbers (M less than 0.3) and Reynolds numbers (less than 1 x 10(exp 6)), the bursting of the laminar separation bubble induces dynamic stall. At a slightly higher Mach number (M = 0.45) and around the same Reynolds number, shock induced separation can cause dynamic stall. Also, the mechanism changes from that of laminar separation bubble bursting to that due to excessive adverse pressure gradient, with increase of Reynolds number. Complex interactions occurring between the local supersonic flow and the bubble lead to another possible mechanism of dynamic stall. Since all these mechanisms may be encountered by a rotor-blade during a single cycle, there is a strong need to devise a reliable flow control method for use under such dramatically varying conditions. Whereas it is a Ali 'Beneficent challenge, identification of the fact that these mechanisms are all in some way related to the airfoil leading edge adverse pressure gradient, has resulted in an effective method of flow control to be described.

Chandasekhara, M. S.↗
NASA NTRS1961

Hovering Characteristics of a Rotor having an Airfoil Section Designed for Flying-Crane Type of Helicopter

Results of an investigation, conducted on the Langley helicopter test tower, of a rotor having an NACA 632A015 airfoil thickness distribution in combination with an NACA 230 mean line are presented. Comparison with a previously reported test of a symmetrical rotor blade efficiency was substantially improved over a wide range of tip Mach numbers. The maximum mean lift coefficient was essentially unchanged from that obtained with uncambered blades. Some data showing the effect of a distributed type of leading-edge roughness are also included.

Shivers, James P.↗