Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cavity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Investigation of the effect of structural defects from hydride precipitation on superconducting properties of high purity SRF cavity Nb using magneto-optical and electron imaging methods

Abstract Nb is an elemental superconductor with a critical temperature of 9.3 K and is widely used to fabricate superconducting radiofrequency (SRF) cavities for particle accelerators. However, microstructural defects in Nb, such as grain boundaries (GBs) and dislocations, can act as pinning centers for magnetic flux that can degrade SRF cavity performance. Hydrogen contamination is also detrimental to SRF cavity performance due to the formation of normal conducting hydrides during cool down. In this study, disc shaped Nb bi-crystals extracted from high-purity large-grain Nb slices were investigated to study the effects of GBs, hydrogen, and dislocations on superconducting properties. Grain orientation and GB misorientation were measured using Laue x-ray diffraction and electron backscattered diffraction (EBSD) analyses. Cryogenic magneto-optical imaging was used to directly observe magnetic flux penetration below T c = 9.3 K. Damage caused by low temperature precipitation of hydrides and their dissolution upon reheating after cryogenic cycles was examined using electron channeling contrast imaging, and EBSD. The relationships between hydride formation, dislocation content, GBs, cryo-cooling, heat treatment (HT), and flux penetration indicate that both GB character and hydrogen content affect magnetic flux penetration. Such flux penetration could be facilitated by dislocation structures and low angle GBs resulting from hydride precipitation and HT.

36 MATERIALS SCIENCE↗

Ac losses in field-cooled type I superconducting cavities

As superconductors are cooled below their critical temperature, stray magnetic flux can become trapped in regions that remain normal. The presence of trapped flux facilitates dissipation of ac current in a superconductor, leading to losses in superconducting elements of microwave devices. In type II superconductors, dissipation is well-understood in terms of the dynamics of vortices hosting a single flux quantum. In contrast, the ac response of type I superconductors with trapped flux has not received much attention. Building on Andreev's early work (Andreev 1967 Sov. Phys. JETP 24 1019), here we show theoretically that the dominant dissipation mechanism is the absorption of the ac field at the exposed surfaces of the normal regions, while the deformation of the superconducting/normal interfaces is unimportant. We use the developed theory to estimate the degradation of the quality factors in field-cooled cavities, and we satisfactorily compare these theoretical estimates to the measured field dependence of the quality factors of two aluminum cavities. We also identify a regime in which the dissipated power depends weakly on the Ginzburg-Landau parameter; this makes it possible to apply our findings to cavities made of other materials, such as niobium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving Nb 3 Sn cavity performance using centrifugal barrel polishing

Abstract In this study we will show a new method of polishing for Nb 3 Sn cavities known as centrifugal barrel polishing (CBP). Using this method, Nb 3 Sn coated samples are polished to a surface roughness comparable to a traditional Nb cavity after electropolishing. We also investigate different methods of cleaning the Nb 3 Sn surface after CBP to remove residual abrasive particles. The polished Nb 3 Sn surface is analyzed using confocal laser microscopy, and scanning electron microscopy is used to image the surface and measure the surface roughness after polishing. Transmission electron microscopy is also used for high resolution analysis of the surface after polishing. Finally, we show that CBP can improve the performance of a Nb 3 Sn superconducting radiofrequency cavity.

43 PARTICLE ACCELERATORS↗

Digital quantum simulation of cavity quantum electrodynamics: insights from superconducting and trapped ion quantum testbeds

We explore the potential for hybrid development of quantum hardware where currently available quantum computers simulate open cavity quantum electrodynamical (CQED) systems for applications in optical quantum communication, simulation and computing. Our simulations make use of a recent quantum algorithm that maps the dynamics of a singly excited open Tavis–Cummings model containing N atoms coupled to a lossy cavity. We report the results of executing this algorithm on two noisy intermediate-scale quantum computers: a superconducting processor and a trapped ion processor, to simulate the population dynamics of an open CQED system featuring N = 3 atoms. By applying technology-specific transpilation and error mitigation techniques, we minimize the impact of gate errors, noise, and decoherence in each hardware platform, obtaining results which agree closely with the exact solution of the system. These results can be used as a recipe for efficient and platform-specific quantum simulation of cavity–emitter systems on contemporary and future quantum computers.

cavity QED↗

Realizing a partial general quantum cloning machine with superconducting quantum-interference devices in a cavity QED

We propose a scheme for implementing a partial general quantum cloning machine with superconducting quantum-interference devices coupled to a nonresonant cavity. By regulating the time parameters, our system can perform optimal symmetric (asymmetric) universal quantum cloning, optimal symmetric (asymmetric) phase-covariant cloning, and optimal symmetric economical phase-covariant cloning. In the scheme the cavity is only virtually excited, thus, the cavity decay is suppressed during the cloning operations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced sensitivity of a passive optical cavity by an intracavity dispersive medium

The pushing of the modes of a Fabry-Perot cavity by an intracavity rubidium cell is measured. The scale factor of the modes is increased by the anomalous dispersion and is inversely proportional to the sum of the effective group index and an additional cavity delay factor that arises from the variation of the Rb absorption over a free spectral range. This additional positive feedback further increases the effect of the anomalous dispersion and goes to zero at the lasing threshold. The mode width does not grow as fast as the scale factor as the intracavity absorption is increased resulting in enhanced measurement sensitivities. For absorptions larger than the scale factor pole, the atom-cavity response is multivalued and mode splitting occurs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamical Casimir effect for TE and TM modes in a resonant cavity bisected by a plasma sheet

Parametric photon creation via the dynamical Casimir effect (DCE) is evaluated numerically, in a three-dimensional rectangular resonant cavity bisected by a semiconductor diaphragm (SD), which is irradiated by a pulsed laser with frequency of GHz order. The aim of this paper is to determine some of the optimum conditions required to detect DCE photons relevant to an experimental detection system. We expand upon the thin plasma sheet model [M. Crocce et al., Phys. Rev. A 70, 033811 (2004)] to estimate the number of photons for both transverse electric (TE) and transverse magnetic (TM) modes at any given SD position. Numerical calculations are performed considering up to 51 intermode couplings by varying the SD location, driving period and laser power without any perturbations. It is found that the number of photons created for TE modes strongly depends on SD position, where the strongest enhancement occurs at the midpoint (not near the cavity wall); while TM modes have weak dependence on SD position. Another important finding is the fact that significant photon production for TM{sub 111} modes still takes place at the midpoint even for a low-laser power of 0.01 {mu}J/pulse, although the number of TE{sub 111} photons decreases almost proportionately with laser power. We also find a relatively wide tuning range for both TE and TM modes that is correlated with the frequency variation in the instantaneous mode functions caused by the interaction between the cavity photons and conduction electrons in the SD excited by a pulsed laser.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong-coupling cavity QED using rare-earth-metal-ion dopants in monolithic resonators: What you can do with a weak oscillator

We investigate the possibility of achieving the strong coupling regime of cavity quantum electrodynamics using rare-earth-metal-ions as impurities in monolithic optical resonators. We conclude that due to the weak oscillator strengths of the rare-earth-metals, it may be possible but difficult to reach the regime where the single photon Rabi frequency is large compared to both the cavity and atom decay rates. However, reaching the regime where the saturation photon and atom numbers are less than one should be much more achievable. We show that in this 'bad cavity' regime, transfer of quantum states and an optical phase shift conditional on the state of the atom is still possible and suggest a method for coherent detection of single dopants.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dynamical Casimir-Polder force in a one-dimensional cavity with quasimodes

In this article, we consider the dynamic Casimir-Polder force between an atom and a conducting wall in a one-dimensional cavity. Using quasimode theory to describe the dissipation of the electromagnetic fields in the cavity, our investigation shows that the force oscillations are damped in a short time, and tend to a final, steady, negative value. We discuss in detail the effects on the force of the quasimode decay rate, the cavity size, and the atom-wall distance.

74 ATOMIC AND MOLECULAR PHYSICS↗

Deterministic source of a train of indistinguishable single-photon pulses with a single-atom-cavity system

We present a mechanism to produce indistinguishable single-photon pulses on demand from an optical cavity. The sequences of two laser pulses generate, at the two Raman transitions of a four-level atom, the same cavity-mode photons without repumping of the atom between photon generations. Photons are emitted from the cavity with near-unit efficiency in well-defined temporal modes of identical shapes controlled by the laser fields. The second-order correlation function reveals the single-photon nature of the proposed source. A realistic setup for the experimental implementation is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shot-noise-limited measurement of sub-parts-per-trillion birefringence phase shift in a high-finesse cavity

We report on a promising approach to high-sensitivity anisotropy measurements using a high-finesse cavity locked by optical feedback to a diode laser. We provide a simple and effective way to decouple the weak anisotropy of interest from the inherent mirror's birefringence whose drift may be identified as the key limiting parameter in cavity-based techniques. We demonstrate a shot-noise-limited phase shift resolution previously inaccessible in an optical cavity, readily achieving the state-of-the-art level of 3x10{sup -13} rad.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Homogeneous solutions for elliptically polarized light in a cavity containing materials with electric and magnetic nonlinearities

We study evolution equations and stationary homogeneous solutions for electric and magnetic field amplitudes in a ring cavity with flat mirrors. The cavity is filled with a positive or negative refraction index material with third order Kerr-like electric nonlinearities and also magnetic nonlinearities, which can be relevant in metamaterials. We consider the degree of freedom of polarization in the incident beam. It is found that considering a magnetic nonlinearity increases the variety of possible qualitatively different solutions. A classification of solutions is proposed in terms of the number of bifurcations. The analysis can be useful for the implementation of optical switching or memory storage using ring cavities with non linear materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Asymptotic entanglement dynamics phase diagrams for two electromagnetic field modes in a cavity

We investigate theoretically an open dynamics for two modes of electromagnetic field inside a microwave cavity. The dynamics is Markovian and determined by two types of reservoirs: the ''natural'' reservoirs due to dissipation and temperature of the cavity, and an engineered one, provided by a stream of atoms passing trough the cavity, as devised by Pielawa et al. [Phys. Rev. Lett. 98, 240401 (2007)]. We found that, depending on the reservoir parameters, the system can have distinct ''phases'' for the asymptotic entanglement dynamics: it can disentangle at finite time or it can have persistent entanglement for large times, with the transition between them characterized by the possibility of asymptotical disentanglement. Incidentally, we also discuss the effects of dissipation on the scheme proposed in the above reference for generation of entangled states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical trapping of dielectric nanoparticles in resonant cavities

We theoretically investigate the opto-mechanical interactions between a dielectric nanoparticle and the resonantly enhanced optical field inside a high Q, small-mode-volume optical cavity. We develop an analytical method based on open system analysis to account for the resonant perturbation due to particle introduction and predict trapping potential in good agreement with three-dimensional (3D) finite-difference time-domain (FDTD) numerical simulations. Strong size-dependent trapping dynamics distinctly different from free-space optical tweezers arise as a consequence of the finite cavity perturbation. We illustrate single nanoparticle trapping from an ensemble of monodispersed particles based on size-dependent trapping dynamics. We further discover that the failure of the conventional dipole approximation in the case of resonant cavity trapping originates from a new perturbation interaction mechanism between trapped particles and spatially localized photons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Changes in the statistical and quantum features of the cavity radiation of a two-photon coherent beat laser due to phase fluctuation

A detailed derivation of the master equation and the corresponding time evolution of the cavity radiation of a coherent beat laser when the atoms are initially prepared in a partial coherent superposition is presented. It turns out that the quantum features and intensity of the cavity radiation are considerably modified by the phase fluctuation arising due to the practical incapability of preparing atoms in the intended perfect coherent superposition. New terms having opposite signs than the contribution of the driving radiation emerged in the master equation. This can be taken as an indication of a competing effect between the two in the manifestation of the nonclassical features. This, on the other hand, means that there is a chance to regain the quantum properties that might have been lost due to faulty preparation in engineering the driving mechanism and vice versa. In light of this, quite remarkably, the cavity radiation is shown to exhibit nonclassical features including two-mode squeezing and entanglement when there is no driving and when the atoms are initially prepared in a partial maximum atomic coherence superposition, contrary to earlier predictions for the case of perfect coherence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Qubit initialization and readout with finite coherent amplitudes in cavity QED

We consider a unitary transfer of an arbitrary state of a two-level atomic qubit in a cavity to the finite amplitude coherent state cavity field. Such a transfer can be used to either provide an effective readout measurement on the atom by a subsequent measurement on the light field or as a method for initializing a fixed atomic state - a so-called 'attractor state', studied previously for the case of an infinitely strong cavity field. We show that, with a suitable adjustment of the coherent amplitude and evolution time, the qubit transfers all its information to the field, attaining a selected state of high purity irrespective of the initial state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiqubit tunable phase gate of one qubit simultaneously controlling n qubits in a cavity

We propose how to realize a multiqubit tunable phase gate of one qubit simultaneously controlling n qubits with four-level quantum systems in a cavity or coupled to a resonator. Each of the n two-qubit controlled-phase (cp) gates involved in this multiqubit phase gate has a shared control qubit but a different target qubit. In this proposal, the two lowest levels of each system represent the two logical states of a qubit while the two higher-energy intermediate levels are used for the gate implementation. The method presented here operates essentially by creating a single photon through the control qubit, which then induces a phase shift to the state of each target qubit. The phase shifts on each target qubit can be adjusted by changing the Rabi frequencies of the pulses applied to the target qubit systems. The operation time for the gate implementation is independent of the number of qubits, and neither adjustment of the qubit level spacings nor adjustment of the cavity mode frequency during the gate operation is required by this proposal. It is also noted that this approach can be applied to implement certain types of significant multiqubit phase gates (e.g., the multiqubit phase gate consisting of n two-qubit cp gates which are key elements in quantum Fourier transforms). A possible physical implementation of our approach is presented. Our proposal is quite general and can be applied to physical systems such as various types of superconducting devices coupled to a resonator and trapped atoms in a cavity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photonic tunneling effect between two coupled single-atom laser cavities imbedded within a photonic-crystal platform

In this paper we investigate the photonic tunneling effect between two coupled one-atom laser cavities. The physical system consists of two coupled photonic crystal microcavities and each cavity contains a coherently pumped two-level atom. The dynamics of the system can be described by the master equation in terms of the reduced density operator. It is shown that the photonic tunneling behavior depends on certain physical conditions of the system. In the absence of the pumping field and without dissipations, the coherent photon number imbalance between two cavities exhibits the alternating-current Josephson effect. However, when the pumping effect and losses of the system are taken into account, the mean photon number imbalance displays a damped oscillation. In addition, the influence of tunneling amplitude and photonic band-gap structure on the oscillations is also studied. The research gives a further insight into the correlated dynamics of two coupled one-atom laser systems and provides an idea for constructing novel photon tunnel devises.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗