Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “behavioral sciences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Modeling Molten Salt Spreading and Heat Transfer using MELTSPREAD – An Uncertainty Analysis

This report summarizes spreading and heat transfer results for molten salt pouring onto a flat stainless steel substrate that were calculated using MELTSPREAD to gain insight into bulk salt behavior during a molten salt spill accident. MELTSPREAD was developed at Argonne to model the one-dimensional flow and freezing behavior of molten corium and is being applied to model molten salts for the first time as part of this work. An uncertainty analysis of thermophysical properties and spill conditions was performed using MELTSPREAD to determine which properties and conditions have the greatest impact on model outcome. The model was run with and without the inclusion of decay heat. Eutectic FLiNaK was used as the salt composition because it is well-characterized and appropriate for model development. Small salt volumes were used for the initial model runs described in this report so that the model results can be compared to the results from ongoing experiments on molten salt spreading and heat transfer currently being conducted at Argonne at a benchtop scale. The spreading of a small volume of FLiNaK (50 mL) was found to be limited by the balance between the molten salt surface tension and gravity and not by freezing for the pour conditions and assumed mechanisms of heat transfer in the model. Heat transfer from the salt was highly inefficient to due to its low thermal conductivity, high heat capacity, and high heat of fusion and varying these properties had no effect on the spreading behavior. Changing the viscosity and density of the salt slightly affected the spreading behavior. Setting the salt surface tension to approximately zero to simulate the salt wetting the substrate had the greatest effect on the spreading behavior and this increased both the spreading velocity and overall spreading area. Including decay heat in the model had a significant effect on the long-term cooling behavior of the salt but had no effect on the overall spreading behavior. Future effort should involve modeling a larger volume of molten salt to represent a reactor case spill scenario because the spreading behavior of large volumes of salt may differ from the small volumes that were the focus of this document.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Electroanalytical Sensors for Liquid Fueled Fluoride Molten Salt Reactor

ThorCon is developing a thermal thorium / uranium molten salt fueled reactor that uses a fuel salt consisting of NaF - BeF 2 - ThF 4 - UF 4 - UF 3 , which uses 19.75% enriched uranium. It is not a breeder reactor but requires regular additions of fissile material. On-site fuel processing is limited to adding make-up fuel, and adding beryllium to maintain redox balance in the fuel salt. The fluoride salt is an excellent flux that will strip the protective oxygen away from all metal surfaces it contacts. In order to protect the metal surfaces in the primary loop, no free fluorine is allowed. Maintaining a ratio of UF 4 to UF 3 provides a chemical buffer that can absorb any free fluorine released during the fission process before it can harm the structure. Periodic additions of metallic beryllium to the fuel salt will react with UF 4 to form BeF 2 and UF 3 , which will maintain the desired UF 4 /UF 3 ratio. A means to measure the UF 4 /UF 3 ratio is important to maintain the fuel salt in a non-corrosive state and could also provide additional insight into the corrosion behavior and chemical constitution of the system. A promising measurement technique is based on electrochemistry.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Report on Initial Tribological Studies of Graphite in Dry Argon and Molten Salt Environment

This report documents completion of the Advanced Reactor Technologies (ART) Level 2 Milestone M2TG-24OR0501081: “Complete report on initial tribological studies within molten salt environment”, due January 31, 2024. This milestone is a carryover milestone from FY23 M2TG-23OR0501091. The report summarizes the initial studies on tribological characterization of the graphite–graphite sliding interface in a dry argon and molten FLiNaK salt environment. The experiments were conducted on a high-temperature multifunctional tribometer placed in a glovebox. This configuration enables probing the wear and friction properties at high temperatures in an inert environment. The worn surfaces were analyzed using high-resolution microscopy and white-light profilometry to determine the wear modes and wear rates. This report discusses the previous wear and friction studies on 316H stainless steel (SS) sliding against graphite in molten salt for different temperatures, sliding speeds, and salt amount. Moreover, key tribological parameters of pebble-on-pebble interaction in gas-cooled and molten salt reactors (MSRs) are analyzed and used to design an experimental test matrix for future studies. The outcomes of this project could provide key information about the tribological behavior of graphite pebbles in gas-cooled and MSRs, thereby contributing to safer operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Leveraging Artificial Intelligence to Predict Novel Eutectic Alloys

The goal of this project was to train an artificial neural network (ANN) to predict the fractional composition and melting point of eutectic alloys using fundamental atomic properties as inputs. The fundamental properties considered include atomic number, atomic weight, atomic radius, valence electron concentration, electronegativity, and electron affinity. The project involved several phases, starting with data preparation, where phase diagram data was harvested from the ASM International database. Approximately 1300 binary eutectics were collected and cleaned to ensure relevance and accuracy. A regression model was selected for training, utilizing a rectified linear unit as the activation function. Various model configurations were evaluated for predictive accuracy, with validation techniques employed to ensure robustness. The model demonstrated predictive capabilities above random guessing and was able to achieve up to 11% accuracy under certain conditions. An ablative test identified atomic radius and valence electron concentration as critical inputs for model performance. Incorporating the melting point of atomic constituents improved accuracy significantly, although ultimately the model’s predictive capability still fell short of the 80% target. This report details the methodology, results, and implications of the research, contributing to the understanding of employing artificial intelligence to predict the phase transition behavior of eutectic alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The Impact of Carbonation Curing on the Fatigue Behavior of Polyvinyl Alcohol Engineered Cementitious Composites (PVA-ECC)

Use of Engineered Cementitious Composites (ECC) has been proven to enhance structural fatigue resistance and reduce the use-phase emissions for transportation infrastructure. Carbonation curing offers an opportunity to reduce the embodied carbon of ECC via direct CO 2 sequestration. In this study, the impact of carbonation curing on ECC’s fatigue resistance was examined. ECC’s CO 2 uptake, static flexural behavior, flexural fatigue performance, and single fiber pull-out behavior were studied experimentally. Midspan deflection up to 3 million cycles under fatigue load, fatigue stress-life relationship, and failure mechanism for carbonation-cured and air-cured ECC were investigated. Carbonation curing was found to significantly improved the fatigue life of ECC and lowered the midspan deflection under the same stress. Further, CO 2 -cured ECC can achieve >20% CO 2 uptake per cement mass after 24-hour carbonation curing. Carbonation curing increased ECC’s flexural strength by 32% and promoted crack width control capability, with maximum post-fatigue crack width reduced from 148 μm to 76 μm. As a result, the positive impact of carbonation curing on the fatigue behavior of ECC simultaneously lowers the embodied and operational carbon of ECC structural members subjected to fatigue loading during service.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Completing the Ba–As Compositional Space: Synthesis and Characterization of Three New Binary Zintl Arsenides, Ba3As4, Ba5As4, and Ba16As11

Three novel binary barium arsenides, Ba3As4, Ba5As4, and Ba16As11, were synthesized and their crystal and electronic structures were investigated. Structural data collected via the single-crystal X-ray diffraction method indicate that the anionic substructures of all three novel compounds are composed of structural motifs based on the homoatomic As–As contacts, with [As2]4− dimers found in Ba5As4 and Ba16As11, and an [As4]6− tetramer found in Ba3As4. Ba3As4 and Ba5As4 crystallize in the orthorhombic crystal system—with the non-centrosymmetric space group Fdd2 (a = 15.3680(20) Å, b = 18.7550(30) Å, c = 6.2816(10) Å) for the former, and the centrosymmetric space group Cmce (a = 16.8820(30) Å, b = 8.5391(16) Å, and c = 8.6127(16) Å) for the latter—adopting Eu3As4 and Eu5As4 structure types, respectively. The heavily disordered Ba16As11 structure was solved in the tetragonal crystal system with the space group P4¯21m (a = 12.8944(12) Å and c = 11.8141(17) Å). The Zintl concept can be applied to each of these materials as follows: Ba3As4 = (Ba2+)3[As4]6−, Ba5As4 = (Ba2+)5(As3−)2[As2]4−, and 2 × Ba16As11 = (Ba2+)32(As3−) ≈ 20[As2]4− ≈ 1, pointing to the charge-balanced nature of these compounds. Electronic structure calculations indicate narrow bandgap semiconducting behavior, with calculated bandgaps of 0.47 eV for Ba3As4, 0.34 eV for Ba5As4, and 0.33 eV for Ba16As11.

Crystallography↗
DOE OSTI2024

Inter-Oligomer Interaction Influence on Photoluminescence in Cis-Polyacetylene Semiconductor Materials

Semiconducting conjugated polymers (CPs) are pivotal in advancing organic electronics, offering tunable properties for solar cells and field-effect transistors. Here, we carry out first-principle calculations to study individual cis-polyacetylene (cis-PA) oligomers and their ensembles. The ground electronic structures are obtained using density functional theory (DFT), and excited state dynamics are explored by computing nonadiabatic couplings (NACs) between electronic and nuclear degrees of freedom. We compute the nonradiative relaxation of charge carriers and photoluminescence (PL) using the Redfield theory. Our findings show that electrons relax faster than holes. The ensemble of oligomers shows faster relaxation compared to the single oligomer. The calculated PL spectra show features from both interband and intraband transitions. The ensemble shows broader line widths, redshift of transition energies, and lower intensities compared to the single oligomer. This comparative study suggests that the dispersion forces and orbital hybridizations between chains are the leading contributors to the variation in PL. It provides insights into the fundamental behaviors of CPs and the molecular-level understanding for the design of more efficient optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

State-Specific Prevalence of Inactivity, Self-Rated Health Status, and Severe Joint Pain Among Adults With Arthritis — United States, 2019

Arthritis is associated with joint pain, disability, and physical inactivity, potentially resulting in poor quality of life. The Centers for Disease Control and Prevention analyzed 2019 Behavioral Risk Factor Surveillance System data to estimate state-specific arthritis prevalence and, among adults with arthritis, the prevalence of physical inactivity, fair/poor self-rated health status, and severe joint pain. Among adults with arthritis, age-standardized prevalences of physical inactivity, fair/poor health status, and severe joint pain were high in all states and highest in southeastern states. Increased promotion and use of evidence-based public health interventions for arthritis may improve health-promoting behaviors and health outcomes among adults with arthritis.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1983

African wave disturbances in a general circulation model

Evidence is presented to show that African wave disturbances are reproduced in a general circulation simulation. The model used is the general circulation model developed by the Goddard Laboratory for Atmospheric Sciences of the National Aeronautics and Space Agency. The model was integrated in order to simulate the summer of 1974. A synoptic analysis of the simulated data over Africa for the month of July was done. The results of the analysis show that wave disturbances are generated by the model; the behavior and the structure of the simulated disturbances are similar to those observed over tropical Africa during the northern summer.

Estoque, M. A.↗
NASA NTRS1997

NASA-UVA Light Aerospace Alloy and Structures Technology Program (LA2ST)

Since 1986, the NASA-Langley Research Center has sponsored the NASA-UVa Light Alloy and Structures Technology (LA2ST) Program at the University of Virginia (UVa). The fundamental objective of the LA2ST program is to conduct interdisciplinary graduate student research on the performance of next generation, light-weight aerospace alloys, composites and thermal gradient structures. The LA2ST program has aimed to product relevant data and basic understanding of material mechanical response, environmental/corrosion behavior, and microstructure; new monolithic and composite alloys; advanced processing methods; measurement and modeling advances; and a pool of educated graduate students for aerospace technologies. The scope of the LA2ST Program is broad. Research areas include: (1) Mechanical and Environmental Degradation Mechanisms in Advanced Light Metals and Composites, (2) Aerospace Materials Science, (3) Mechanics of materials for Aerospace Structures, and (4) Thermal Gradient Structures. A substantial series of semi-annual progress reports issued since 1987 documents the technical objectives, experimental or analytical procedures, and detailed results of graduate student research in these topical areas.

Gangloff, Richard P.↗
NASA NTRSDate not supplied

Investigating Material Behavior in Atmospheric Entry Conditions: Arc-Jet Testing Insights from Meteorite Ablation to High-Temperature Coatings.

Arc-jet testing is an indispensable tool in elucidating the complex interactions materials undergo when subjected to the extreme thermal and mechanical stresses of atmospheric entry. By replicating these harsh conditions, arc-jets enable researchers to explore critical phenomena such as ablation, melting, and spallation, generating invaluable data that informs the development of sophisticated, physics-based models. These models are pivotal not only in predicting material performance for spacecraft re-entry systems but also in assessing the threat posed by celestial bodies as they encounter Earth’s atmosphere. One of the leading facilities for such investigations is the Hypersonic Materials Environmental Test System (HyMETS) at NASA’s Langley Research Center. A pioneering test campaign conducted at HyMETS focused on unraveling the ablation mechanisms of an ordinary chondrite meteorite (Tamdakht H5) and a terrestrial analog (basalt). These studies unveiled distinct material behaviors: Tamdakht demonstrated a remarkably stable melt flow, with mass loss primarily driven by the volatilization of elements such as iron and sodium, whereas basalt exhibited more aggressive surface degradation due to the rapid decomposition of hydrated minerals, culminating in significant spallation and surface material ejection. Beyond meteorite analysis, HyMETS has also been integral in the exploration of advanced Thermal Protection Systems (TPS) such as Phenolic Impregnated Carbon Ablator (PICA), a material with extensive flight heritage in missions like Stardust, Mars Science Laboratory, Mars 2020, and Osiris-REx. PICA, when coated with NuSil CV-1144-0—a polysiloxane resin designed to prevent particle shedding—undergoes a remarkable transformation upon heating. The resin pyrolyzes to form a thin, oxidation-resistant silicon oxycarbide layer that profoundly influences the material’s thermal response through a sophisticated four-stage process. Initially, the silicon oxycarbide acts as a formidable barrier, impeding reactive interactions with the PICA char and effectively suppressing surface temperature rise and material recession. However, as the heating persists, the protective layer decomposes via carbothermal reduction, exposing the underlying char, which in turn leads to a dramatic spike in surface temperature and accelerated material erosion. In the final stage, equilibrium is reached, with recession rates aligning with those of the virgin material. This intricate understanding of PICA-NuSil behavior under extreme conditions offers valuable insights, enhancing material response models and advancing the development of next-generation TPS for space exploration.

Chemistry↗
NASA NTRS2006

Space Life Sciences at NASA: Spaceflight Health Policy and Standards

In January 2005, the President proposed a new initiative, the Vision for Space Exploration. To accomplish the goals within the vision for space exploration, physicians and researchers at Johnson Space Center are establishing spaceflight health standards. These standards include fitness for duty criteria (FFD), permissible exposure limits (PELs), and permissible outcome limits (POLs). POLs delineate an acceptable maximum decrement or change in a physiological or behavioral parameter, as the result of exposure to the space environment. For example cardiovascular fitness for duty standards might be a measurable clinical parameter minimum that allows successful performance of all required duties. An example of a permissible exposure limit for radiation might be the quantifiable limit of exposure over a given length of time (e.g. life time radiation exposure). An example of a permissible outcome limit might be the length of microgravity exposure that would minimize bone loss. The purpose of spaceflight health standards is to promote operational and vehicle design requirements, aid in medical decision making during space missions, and guide the development of countermeasures. Standards will be based on scientific and clinical evidence including research findings, lessons learned from previous space missions, studies conducted in space analog environments, current standards of medical practices, risk management data, and expert recommendations. To focus the research community on the needs for exploration missions, NASA has developed the Bioastronautics Roadmap. The Bioastronautics Roadmap, NASA's approach to identification of risks to human space flight, revised baseline was released in February 2005. This document was reviewed by the Institute of Medicine in November 2004 and the final report was received in October 2005. The roadmap defines the most important research and operational needs that will be used to set policy, standards (define acceptable risk), and implement an overall Risk Management and Analysis process. Currently NASA is drafting spaceflight health standards for neurosensory alterations, space radiation exposure, behavioral health, muscle atrophy, cardiovascular fitness, immunological compromise, bone demineralization, and nutrition.

Davis, Jeffrey R.↗
DOE OSTI2026

Elucidating hydrogen isotope transport mechanisms in proton-conducting ceramics with trapping effects using TMAP8

Hydrogen isotopes play an central role in many science and engineering applications such as fuel cells, hydrogen production, and fusion energy. For these applications, hydrogen separation and extraction applications are pivotal aspects of hydrogen transports, where proton-conducting ceramics (PCCs) have shown great potential. In this study, we propose a new model for hydrogen isotope transport in PCC materials, BaZr 0.9 Y 0.1 O 2.95 (BZY) in particular, which captures behavior in both dry and wet environments. The model expands previous efforts and considers diffusion, trapping, and surface reactions (i.e., dissociation and recombination). We then validate and calibrate the model using deuterium transport measurements from experiments in both dry and wet environments. This study highlights the key role of trapping, often neglected, on hydrogen isotope transport in BZY and other PCC materials. It also explains how the commonly observed discrepancy between dry and wet behavior can be attributed to more active surface reactions and saturated traps due to the increased hydrogen presence under the wet environment. These results provide insights to optimize PCC manufacturing and usage as a hydrogen separation and extraction technology in various fields, emphasizing that lowering the trapping can reduce hydrogen isotope retention. These modeling and calibration efforts are performed using the tritium migration analysis program, version 8 (TMAP8), an open-source application designed for hydrogen isotope transport.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Continuous polyamorphic transition in high-entropy metallic glass

Polyamorphic transition (PT) is a compelling and pivotal physical phenomenon in the field of glass and materials science. Understanding this transition is of scientific and technological significance, as it offers an important pathway for effectively tuning the structure and property of glasses. In contrast to the PT observed in conventional metallic glasses (MGs), which typically exhibit a pronounced first-order nature, herein we report a continuous PT (CPT) without first-order characteristics in high-entropy MGs (HEMGs) upon heating. This CPT behavior is featured by the continuous structural evolution at the atomic level and an increasing chemical concentration gradient with temperature, but no abrupt reduction in volume and energy. The continuous transformation is associated with the absence of local favorable structures and chemical heterogeneity caused by the high configurational entropy, which limits the distance and frequency of atomic diffusion. As a result of the CPT, numerous glass states can be generated, which provides an opportunity to understand the nature, atomic packing, formability, and properties of MGs. Moreover, this discovery highlights the implication of configurational entropy in exploring polyamorphic glasses with an identical composition but highly tunable structures and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Position Papers for the 2024 ASCR Workshop on Neuromorphic Computing for Science

Engineering novel neuromorphic computing systems with functionalities, capabilities, and energy efficiency similar to biological brains is one of the most exciting and challenging scientific endeavors of our time. This workshop aims to identify key research needs, challenges, and next steps necessary to develop biologically realistic neuromorphic circuits primitives that capture the functionality of neural systems found in nature. Moreover, simulating neuromorphic computing primitives integrated into networks will be key to under standing their behavior at scale, particularly for those computing architectures where full-scale commercial fabrication is not yet readily accessible. Appropriate neuroscience datasets and metrics will have to be established to vet proposed neuromorphic circuits.

97 MATHEMATICS AND COMPUTING↗