Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Permeation Properties of Disordered Metal-Organic Framework Membranes Made by Vapor Phase Ligand Treatment

Zeolitic imidazolate frameworks (ZIFs) are nanoporous molecular sieves offering exciting opportunities for membrane- and adsorption-based gas separations. The Tsapatsis group developed an all-vapor-phase ligand induced permselectivation (LIPS) method for the fabrication of ZIF nanocomposite membranes. The LIPS method consists of a combination of atomic layer deposition of a dense oxide inside the mesopores of a porous support followed by transformation of the dense oxide deposit to nanoporous ZIF by exposure to sublimated vapors of an imidazolate ligand. It enables the formation of thin nanocomposite films consisting of ZIF deposited inside pores with diameters smaller than 10 nm. Vapor-phase conversion of the impermeable ZnO to ZIF increases flux of certain gases more than others. Vapor phase linker/ligand treatment (VPLT) can further modify the properties of LIPS and other membranes. The combination of LIPS with VPLT provides an all-vapor methodology for making and modifying ZIF membranes with the ability to control the ZIF deposit composition and the level of confinement in a variety of mesoporous supports. The propylene/propane separation performance of LIPS/VPLT ZIF membranes confined (entirely or partially) inside mesopores is remarkably superior to that of most conventional ZIF membranes consisting of unconfined (deposited on the external surface of porous supports) polycrystalline films. The accomplishments of this award are: (i) understanding of the LIPS process using mathematical models of atomic layer deposition (ALD), (ii) development of surface modification methods (vapor, e-beam, plasma, and X-ray treatments) to tune permeation properties, (iii) microstructural control of ZIF-8 films using ALD (support modification, direct ALD, and by use of in situ permeability monitoring), (iv) molecular simulations, and (v) thin film characterization and adsorption measurements using spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Magnetic order and physical properties of the kagome metal UNb 6 ⁢Sn 6

The 𝑅⁢𝑀 6 ⁢𝑋 6 family of materials (𝑅 = rare-earth, 𝑀 = transition metal, 𝑋 = Ga, Si, Ge, Sn) produces an array of emergent phenomena, such as charge density waves, intrinsic Hall effects, and complex magnetic order, due to its kagome net of transition metal atoms, its local-moment magnetic anisotropies, and its extensive chemical tunability. Here, in this study, we report UNb 6⁢ Sn 6 , a new “166” material containing both an actinide and a 4⁢𝑑 transition metal, along with its nonmagnetic analog ThNb6⁢Sn6, to investigate the properties of a 5⁢𝑓−4⁢𝑑 electron 166 system. UNb 6 ⁢Sn 6 crystallizes in the hexagonal 𝑃⁢6/𝑚⁢𝑚⁢𝑚 space group with a small degree of disorder due to shifts in the size of the CoSn-like cages along the 𝑐 axis. Upon cooling at zero magnetic field, the material undergoes two magnetic phase transitions at 𝑇 2 = 46K and 𝑇 N = 43K. The low-temperature, zero-field phase is an antiferromagnet with ordered uranium moments and a k = (0,0,1/2) propagation vector determined by neutron diffraction. Remarkably, with a magnetic field applied along the 𝑐 axis, five additional magnetic transitions occur, evidenced by magnetization and resistivity data, before the moment saturates at 2.62 𝜇 B /U at 2 K and ≥ 13.6T. In two magnetic phase regions, the Hall resistivity of UNb 6⁢ Sn 6 significantly deviates from the magnetization, suggesting that the phases have a large Berry curvature or a change in the Fermi surface. The unknown magnetic ordering of the field-dependent phases of UNb 6⁢ Sn 6 demonstrates the complexity of the 5⁢𝑓−4⁢𝑑 166 system and encourages further study of its properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Optical telecommunications-band clock based on neutral titanium atoms

Here, we propose an optical clock based on ultranarrow transitions in neutral titanium, which exhibit small blackbody radiation and quadratic Zeeman shifts and have wavelengths in the S-, C-, and L-telecommunications fiber bands, allowing for integration with robust laser technology. We calculate relevant properties using a high-precision relativistic hybrid method that combines configuration interaction and coupled-cluster approaches. To identify magic wavelengths, we have completed the largest-to-date direct dynamical polarizability calculations. Finally, we identify challenges that arise from magnetic dipole-dipole interactions and describe an approach to overcome them. A telecommunications-band atomic frequency standard will aid the deployment of optical clock networks and clock comparisons over long distances.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Structural complexity in ramp-compressed sodium to 480 GPa

Abstract The properties of all materials at one atmosphere of pressure are controlled by the configurations of their valence electrons. At extreme pressures, neighboring atoms approach so close that core-electron orbitals overlap, and theory predicts the emergence of unusual quantum behavior. We ramp-compress monovalent elemental sodium, a prototypical metal at ambient conditions, to nearly 500 GPa (5 million atmospheres). The 7-fold increase of density brings the interatomic distance to 1.74 Å well within the initial 2.03 Å of the Na + ionic diameter, and squeezes the valence electrons into the interstitial voids suggesting the formation of an electride phase. The laser-driven compression results in pressure-driven melting and recrystallization in a billionth of a second. In situ x-ray diffraction reveals a series of unexpected phase transitions upon recrystallization, and optical reflectivity measurements show a precipitous decrease throughout the liquid and solid phases, where the liquid is predicted to have electronic localization. These data reveal the presence of a rich, temperature-driven polymorphism where core electron overlap is thought to stabilize the formation of peculiar electride states.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Predicting Adhesion Energies of Metal Nanoparticles to Support Surfaces, Which Determines Metal Chemical Potential versus Particle Size and Thus Catalyst Performance

Improved catalysts and electrocatalysts composed of transition metal nanoparticles dispersed on high-area supports are essential for energy and environmental technologies. The chemical potential of the metal atoms in these supported nanoparticles is an important descriptor that correlates with both their catalytic activity and deactivation rate. This descriptor (μ M ) is predictably determined by the particle size and the adhesion energy per unit area at the metal/support interface (E adh ). We show here that the adhesion energies for different metals on a given support scale linearly with a simple property of the metal: for oxides, it is proportional to the metal oxophilicity, and for the carbon support, it increases linearly with metal carbophilicity (both divided by the area per metal atom). Furthermore, these relationships allow predicting E adh for other metal/support combinations, thus allowing estimation of μ M versus particle size and thereby better structure-based predictions of catalysts’ performance, which can aid in designing improved catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Machine Learning Framework for Characterizing Processing–Structure Relationship in Block Copolymer Thin Films

The morphology of block copolymers (BCPs) critically influences material properties and applications. This work introduces a machine learning (ML)-enabled, high-throughput framework for analyzing grazing incidence small-angle X-ray scattering (GISAXS) data and atomic force microscopy (AFM) images to characterize BCP thin film morphology. A convolutional neural network was trained to classify AFM images by surface features, achieving 97% testing accuracy. Classified images were then analyzed to extract 2D grain size measurements from the samples in a high-throughput manner. ML models were trained to predict domain orientation based on processing parameters such as solvent ratio, additive type, and additive ratio. GISAXS-based properties were predicted with strong performances (R 2 > 0.75), while AFM-based property predictions were less accurate (R 2 < 0.60), likely due to the localized nature of AFM measurements compared to the bulk information captured by GISAXS. Beyond model performance, interpretability was addressed using SHapley Additive exPlanations (SHAP). SHAP analysis revealed that the additive ratio had the largest impact on morphological predictions, where additive provides the BCP chains with increased volume to rearrange into thermodynamically favorable morphologies. This interpretability helps validate model predictions and offers insight into parameter importance. Altogether, the presented framework combining high-throughput characterization and interpretable ML offers an approach to exploring and optimizing BCP thin film morphology across a broad processing landscape.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Time-resolved absorption spectroscopic characterization of ultrafast laser-produced plasmas under varying background pressures

Time-resolved tunable laser absorption spectroscopy is used to characterize the physical properties of ultrafast laser-produced plasmas. The plasmas were produced from an Inconel target, with = 0.4 wt. % Al, using ~ 35 fs, ~800 nm laser pulses at varying Ar background pressures from 1-100 Torr. The absorption spectrum of atomic Al is measured with high spectral and temporal resolution when the probe laser is stepped across the selected Al transition at 394.4 nm. Spectral fitting is used to infer linewidths, kinetic temperature, Al column density, and pressure broadening coefficient. The late time physical properties of plasmas are compared for various pressure levels. Our studies highlight that a significant lower state population exists even at early times of ultrafast laser-produced plasma evolution and lower state population persistence decreases with increasing ambient pressure. We also show that the fundamental optical properties, such as pressure-broadening, can be measured using ultrafast laser-produced plasmas combined with laser absorption spectroscopy.

laser absorption spectroscopy, laser produced plas↗
DOE OSTI2023

Exploring structural transitions at grain boundaries in Nb using a generalized embedded atom interatomic potential

The advancement in experimental techniques, like the atom probe tomography and high resolution electron microscopy, is fueling interest in studying structural transformations of grain boundaries in metal and alloys to uncover correlations between mechanical properties and solute or impurity segregation to grain boundaries. Atomistic modeling is an important tool that can pinpoint the intricate dynamics of grain boundary phase transitions, but the lack of accurate interatomic potentials needed to simulate the complex dynamics of grain boundary structural transitions and identify different metastable phases has been the bottleneck. To this end, we use niobium as a model body centered cubic (BCC) metal and develop an interatomic potential to study grain boundary phase transitions. The potential for Nb is based on a generalization of the embedded atomic method potential and has sufficient flexibility to learn complex energy landscapes using a small set of training structures. We systematically test and validate the using data from ab initio density functional theory calculations and experiments. Using this potential, we calculate energies of multiple symmetric-tilt grain boundaries spanning a wide range of misorientation angles. Additionally, we explore different metastable structures of the Σ 27(552) [$1\overline{1}0$] grain boundary and use molecular dynamic simulations to study the coexistence of metastable phases and grain boundary transitions at finite temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ultra-fast interpretable machine-learning potentials

Abstract All-atom dynamics simulations are an indispensable quantitative tool in physics, chemistry, and materials science, but large systems and long simulation times remain challenging due to the trade-off between computational efficiency and predictive accuracy. To address this challenge, we combine effective two- and three-body potentials in a cubic B-spline basis with regularized linear regression to obtain machine-learning potentials that are physically interpretable, sufficiently accurate for applications, as fast as the fastest traditional empirical potentials, and two to four orders of magnitude faster than state-of-the-art machine-learning potentials. For data from empirical potentials, we demonstrate the exact retrieval of the potential. For data from density functional theory, the predicted energies, forces, and derived properties, including phonon spectra, elastic constants, and melting points, closely match those of the reference method. The introduced potentials might contribute towards accurate all-atom dynamics simulations of large atomistic systems over long-time scales.

36 MATERIALS SCIENCE↗
DOE OSTI2025

PAH101: A GW+BSE Dataset of 101 Polycyclic Aromatic Hydrocarbon (PAH) Molecular Crystals

Abstract The excited-state properties of molecular crystals are important for applications in organic electronic devices. TheGWapproximation and Bethe-Salpeter equation (GW+BSE) is the state-of-the-art method for calculating the excited-state properties of crystalline solids with periodic boundary conditions. We present the PAH101 dataset ofGW+BSE calculations for 101 molecular crystals of polycyclic aromatic hydrocarbons (PAHs) with up to ~500 atoms in the unit cell. To the best of our knowledge, this is the firstGW+BSE dataset for molecular crystals. The data records include theGWquasiparticle band structure, the fundamental band gap, the static dielectric constant, the first singlet exciton energy (optical gap), the first triplet exciton energy, the dielectric function, and optical absorption spectra for light polarized along the three lattice vectors. The dataset can be used to (i) discover materials with desired electronic/optical properties, (ii) identify correlations between DFT andGW+BSE quantities, and (iii) train machine learned models to help in materials discovery efforts.

Science & Technology - Other Topics↗
DOE OSTI2022

Verification of stability and unraveling the electronic and physical properties of bulk and (001)-surfaces of newly synthesized Ti 2 ZnX (X = C, N) MAX phases

MAX phase family has been extended by the addition of late transition metals at the A-site with the expectation of diverse functional properties. Here, we present our systematic density functional investigation on the thermodynamic and phonon stabilities, elastic properties, including elastic constants, elastic moduli and elastic anisotropy of newly synthesized Ti 2 ZnX (X = C, N) phases in comparison with conventional Ti 2 AlX (X = C, N). Due to the smaller size of N as compared to C, the unit cell dimension is reduced when C atoms are replaced by N atoms at the X-site. Furthermore, the Ti 2 ZnC and Ti 2 ZnN are stable at the equilibrium volume of 110.84 Å 3 and 105.70 Å 3 . The thermodynamic, mechanical and dynamical stabilities are validated by estimating the formation energies, elastic constants and phonon dispersions, respectively. The elastic properties of Ti 2 ZnN are less anisotropic as compared to those of Ti 2 ZnC. To understand the thin-film characteristics in Ti 2 ZnX, the surface properties with (001)-terminated slabs are investigated. Both Ti 2 ZnX bulk and (001)-surfaces exhibit metal-like electronic structures. There is a strong covalent bonding between Ti-X and Ti-Zn atoms confirmed by the charge density map and Mulliken population analysis. Additional states are generated at the Fermi level (EF) due to the unusual d-p states hybridization between Ti and Zn atoms. The anisotropy in chemical bonding is confirmed by the cleavage energy difference between Ti-X and Ti-Zn. Here, Ti(X)-001 and Zn-001 terminations are stable surfaces; however, in terms of chemical potentials, Zn-001 termination is the most favourable in Ti 2 ZnX.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Stability and magnetic behavior of exfoliable nanowire one-dimensional materials

Low-dimensional materials can display enhanced electronic, magnetic, and quantum properties. Here we use the topological scaling algorithm to identify all sufficiently metastable materials in the Materials Project database to identify bulk crystals with one-dimensional (1D) structural motifs: Five hundred fifty-one crystals that are within 50 meV atom –1 of the thermodynamic hull display 1D motifs, where 293 of these contain d-valence elements, which we focus on in this work. After exfoliating nanowires from 263 of these materials and calculating their thermodynamic stability using density functional theory, 103 nanowires meet per-atom and per-Ångström thermodynamic stability criteria. We illustrate for three nanowire systems that a variety of local minima can be present in these systems, demonstrating one case of a Peierls distortion. The wires display a broad diversity of electronic and magnetic properties of these nanowires, with 14 metals, 7 half-metals, and 82 semiconductors and insulators, and 41 nanowires displaying magnetic moments ranging from 0.1 to 5μ B per d-valence species when assuming ferromagnetic order. A subset of these chains are investigated for the impact of magnetic ordering, identifying 1D FeCl 3 to be most stable in an antiferromagnetic state. The electronic and magnetic properties of the identified 1D materials could enable applications in spintronic and quantum devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomic Structure of the Initial Nucleation Layer in Hexagonal Perovskite BaRuO 3 Thin Films

Hexagonal perovskites are an attractive family of materials due to their various polymorphs and rich structure–property relationships. BaRuO 3 (BRO) is a prototypical hexagonal perovskite, in which the electromagnetic properties are significantly modified depending on its lattice structure. Whereas thin-film synthesis would allow the study of the diverse properties of hexagonal perovskites by epitaxially stabilizing various metastable polymorphs, the epitaxial growth of hexagonal perovskites, especially at the initial growth stage, is yet to be addressed. In this study, it is shown that an intriguing nucleation behavior takes place during the initial stabilization of a hexagonal 9R BRO thin film deposited on a (111) SrTiO 3 (STO) substrate. It is found that a nanoscale strained layer composed of different RuO 6 octahedral stacking is initially formed at the interface followed by a relaxed single crystal 9R BRO thin film. Within the interface layer, hexagonal BRO is nucleated on the (111) STO substrate by both face- and corner-sharing octahedra. More interestingly, it is found that boundaries between differently stacked nucleation layers (heterostructural boundaries) facilitate strain relaxation, in addition to the formation of conventional misfit dislocations evolved from homostructural boundaries. The observations reveal an important underlying mechanism to understand the thin-film epitaxy and strain accommodation in hexagonal perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Comparison of Solid Electrolyte Interphase Formation and Evolution on Highly Oriented Pyrolytic and Disordered Graphite Negative Electrodes in Lithium–Ion Batteries

The presence and stability of solid electrolyte interphase (SEI) on graphitic electrodes is vital to the performance of lithium-ion batteries (LIBs). However, the formation and evolution of SEI remain the least understood area in LIBs due to its dynamic nature, complexity in chemical composition, heterogeneity in morphology, as well as lack of reliable in situ/operando techniques for accurate characterization. In addition, chemical composition and morphology of SEI are not only affected by the choice of electrolyte, but also by the nature of the electrode surface. While introduction of defects into graphitic electrodes has promoted their electrochemical properties, how such structural defects influence SEI formation and evolution remains an open question. In this work, utilizing nondestructive operando electrochemical atomic force microscopy (EChem-AFM) the dynamic SEI formation and evolution on a pair of representative graphitic materials with and without defects, namely, highly oriented pyrolytic and disordered graphite electrodes, are systematically monitored and compared. Complementary to the characterization of SEI topographical and mechanical changes during electrochemical cycling by EChem-AFM, chemical analysis and theoretical calculations are conducted to provide mechanistic insights underlying SEI formation and evolution. The results provide guidance to engineer functional SEIs through design of carbon materials with defects for LIBs and beyond.

25 ENERGY STORAGE↗
DOE OSTI2021

Piezoelectric response and failure behavior of cement paste under external loading

We study the elastic behavior and rupture mechanism of Calcium Silicate Hydrates (C-S-H) in response to tensile loading. For the three tensile axes, initial defects are spotted in the interlayer regions. However, the crack propagation is rather different depending on the axis of tensile. The cup-and-cone failure surface shows the ductile feature of C-S-H in the x and y directions; while the devastating rupture mode confirms the brittle feature of C-S-H in the z direction. Piezoelectricity was investigated using the charge fluctuation method. The polarization variation in response to small strain was also investigated and piezoelectric coefficients were derived. Furthermore, dependence of elastic and piezoelectric properties over external pressure was analyzed. Results reveal an improvement of the mechanical properties and the ultimate strength especially in the z direction; whereas the non-piezoelectricity remains unchanged despite the rearrangement of atoms induced by the external applied pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A new interatomic potential for mixed Mg-Al-Ga-In spinels

While density functional theory (DFT) has become the de facto approach for accurate simulation of materials at the atomic scale, there are many aspects of materials that are simply out of reach of DFT methods. In particular, finite temperature properties such as diffusivities, the structure and properties of grain boundaries and interfaces, and the study of defect properties in complex alloys are computationally challenging for DFT methods. Recently, a new class of spinels in which three cations order over two sublattices was discovered. In order to predict the properties of these types of structures, classical potentials are a must. Here, in this work, we derive a new classical potential for Mg-bearing spinels in which the B cations are Al, Ga, and/or In. The potential does well in describing the DFT energetics of various spinel structures as a function of chemistry and inversion. In particular, it reproduces the thermodynamically favorable MgAlGaO 4 structure while correctly predicting that neither MgAlInO 4 nor MgGaInO 4 are stable. Further, it reproduces physical trends in elastic properties as compared against experiment.

36 MATERIALS SCIENCE↗