Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Microwave Magnetic Absorption in HgSe with Co and Ni Impurities

Features of magnetic-field-dependent microwave absorption in HgSe samples doped with Co and Ni impurities in different concentrations are investigated. The electron-spin resonance spectra of weakly coupled Co atoms and peculiarities of the magnetic-absorption variation in a magnetic field passing through the zero value are established. The main parameters of the electron-spin resonance spectra and temperature and angular dependences of microwave absorption in weak fields are determined.

36 MATERIALS SCIENCE↗

The Mechanisms of Absorption of Terahertz and Infrared Radiation in PZT Films

Terahertz and IR spectra of dielectric response of dense and porous Pb(Zr,Ti)O{sub 3} films deposited on single-crystal magnesia and alumina substrates and on silicon substrates with a conducting platinum sublayer are measured in the and analyzed. We consider the key mechanisms of electric dipole absorption that give rise to absorption bands observed in experimentally measured reflection and transmission spectra, and discuss the relationship between the type of substrate and the parameters characterizing the absorption bands in the spectra of the prepared PZT films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structure and Optical Absorption Spectra of Gold Fullerenes Au{sub 16} and Au{sub 20}

The electronic and optical properties of gold fullerenes are studied in the framework of the Hubbard model. The expressions of the Fourier transforms of anticommutator Green functions have been obtained for gold fullerenes Au{sub 16} and Au{sub 20}, the poles of which determine the energy spectrum of the system under consideration. The calculations are performed for the thermodynamic means that characterize jumps of electrons from a nanosystem site to a neighboring site, the correlation functions demonstrating the possibility of existing two d electrons with oppositely oriented spin projections on the same site of the fullerenes consisting of gold atoms. The optical absorption spectra are presented. The optical absorption peaks of ions Au{sub 20}{sup −} and Au{sub 16}{sup −} correspond to a near-infrared spectral region, where the light absorption by blood or a soft tissue is vanishingly small; thus, these ions can be used as a new class of contrast improvements and phototherapeutic means for diagnostics and treatment of cancer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain Rate Effects on the Energy Absorption of Rapidly Manufactured Composite Tubes

Quasi-static and intermediate rate axial crush tests were conducted on tubular specimens of Carbon/Epoxy (Toray T700/G83C) and Glass/Polypropylene (Twintex). The quasi-static tests were conducted at 10 mm/min (1.67x10-4 m/s); five different crush initiators were used. Tests at intermediate rates were performed at speeds of 0.25 m/s, 0.5 m/s, 0.75 m/s 1m/s, 2 m/s and 4 m/s. Quasi-static tests of tubular specimens showed high specific energy absorption (SEA) values with 86 kJ/kg for Carbon/Epoxy specimens. The specific energy absorption of the Glass/Polypropylene specimens was measured to be 29 kJ/kg. Results from the intermediate test rates showed that while a decrease in specific energy absorbed was observed as speeds increased, values did not fall below 55kj/kg for carbon specimens or 35 kJ/kg for the Glass/Polypropylene specimens. When compared with steel and aluminium, specific energy absorption values of 15 kJ/kg and 30 kJ/kg respectively, the benefits of using composite materials in crash structures are apparent.

Carbon Fibre↗

First calibration measurements of an FTIR absorption spectroscopy system for liquid hydrogen isotopologues for the isotope separation system of fusion power plants

Fusion facilities like ITER and DEMO will circulate huge amounts of deuterium and tritium in their fuel cycle with an estimated throughput of kg per hour. One important capability of these fuel cycles is to separate the hydrogen isotopologues (H{sub 2}, D{sub 2}, T{sub 2}, HD, HT, DT). For this purpose the Isotope Separation System (ISS), using cryogenic distillation, as part of the Tritium Enrichment Test Assembly (TRENTA) is under development at Tritium Laboratory Karlsruhe. Fourier transform infrared absorption spectroscopy (FTIR) has been selected to prove its capability for online monitoring of the tritium concentration in the liquid phase at the bottom of the distillation column of the ISS. The actual research-development work is focusing on the calibration of such a system. Two major issues are the identification of appropriate absorption lines and their dependence on the isotopic concentrations and composition. For this purpose the Tritium Absorption IR spectroscopy experiment has been set up as an extension of TRENTA. For calibration a Raman spectroscopy system is used. First measurements, with equilibrated mixtures of H{sub 2}, D{sub 2} and HD demonstrate that FTIR can be used for quantitative analysis of liquid hydro-gen isotopologues and reveal a nonlinear dependence of the integrated absorbance from the D{sub 2} concentration in the second vibrational branch of D{sub 2} FTIR spectra. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nano-crystalline silicon solar cell architecture with absorption at the classical 4n2 limit

We develop a periodically patterned conformal photonic-plasmonic crystal based solar architecture for a nano-crystalline silicon solar cell, through rigorous scattering matrix simulations. The solar cell architecture has a periodic array of tapered silver nano-pillars as the back-reflector coupled with a conformal periodic structure at the top of the cell. The absorption and maximal current, averaged over the entire range of wavelengths, for this solar cell architecture is at the semi-classical 4n{sup 2} limit over a range of common thicknesses (500-1500 nm) and slightly above the 4n{sup 2} limit for a 500 nm nc-Si cell. The absorption exceeds the 4n{sup 2} limit, corrected for reflection loss at the top surface. The photonic crystal cell current is enhanced over the flat Ag back-reflector by 60%, for a thick 1000 nm nc-Si layer, where predicted currents exceed 31 mA/cm{sup 2}. The conformal structure at the top surface focuses light within the absorber layer. There is plasmonic concentration of light, with intensity enhancements exceeding 7, near the back reflector that substantially enhances absorption.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detection limits for laser absorption spectroscopy of Li in laser ablation plumes

A high-sensitivity laser absorption spectroscopy (LAS) method is demonstrated for rapid and non-contact analysis of Li in solids. Glass samples with Li concentrations ranging from 1-500 ppm by mass are ablated in 5 Torr air, and time-resolved Li atomic absorption is measured using a tunable laser near 671 nm. Significant improvements in analytical performance over prior laser-induced breakdown techniques are demonstrated. Here, a single-shot limit of detection (LOD) of 180 ppb is shown for fixed wavelength operation, improving to 6 ppb with averaging over 1000 ablation shots (100 s acquisition time). Isotope-resolved Li absorption spectra are measured with a 17 ppb LOD in 40 s. Methods for optimizing LOD based on noise/averaging properties of LAS experiments in LA plumes are discussed.

(020.3260) Isotope shifts↗

Calculation tool for transported geothermal energy using two-step absorption process

This spreadsheet allows the user to calculate parameters relevant to techno-economic performance of a two-step absorption process to transport low temperature geothermal heat some distance (1-20 miles) for use in building air conditioning. The parameters included are (1) energy density of aqueous LiBr and LiCl solutions, (2) transportation cost of trucking solution, and (3) equipment cost for the required chillers and cooling towers in the two-step absorption approach. More information is available in the included public report: "A Technical and Economic Analysis of an Innovative Two-Step Absorption System for Utilizing Low-Temperature Geothermal Resources to Condition Commercial Buildings"

15 GEOTHERMAL ENERGY↗

Parametric Testing and Evaluation of a Novel Biphasic Absorption Process for Post-Combustion Carbon Capture

A novel biphasic CO2 absorption process (BiCAP) is being developed at the University of Illinois. BiCAP is enabled by using a new class of biphasic solvents developed based on multi-property criteria for postcombustion carbon capture. The process was previously demonstrated at the lab-scale, including in 10 kWe absorption and desorption column systems. In the current study, the process has been scaled up by building and testing a 40 kWe integrated capture skid at a power plant. Parametric tests for two biphasic solvents were conducted with the synthetic flue gas made of bottle CO2 gas and air to validate the performance and operational flexibility of the unit with respect to varying process or operating conditions. Operation of the phase separator, which is unique equipment to BiCAP, was verified to be stable and efficient. Two liquid phases could be separated via static settlement based on a density difference and >90% of the CO2 absorbed was concentrated in the separated CO2-rich phase. Results of parametric tests showed that the minimum heat duty appeared at the optimal stripping pressure. A higher stripping temperature was more favourable to improve overall energy performance. Introducing a secondary cold solvent feed stream to the top of the stripper via bypassing the cross heat exchanger helped reduce the heat loss carried with water vapour. Test results also revealed that the heat duty requirement was comparable when the CO2 concentration in flue gas decreased from ~11 to 4 vol.% as the phase separation decoupled the absorption and desorption steps in BiCAP. Under typical steady-state conditions, both biphasic solvents lowered the process heat duty by >40% compared with the reference 30 wt.% monoethanolamine solvent.

Absorption↗

Continuous Light Absorption Photometer (CLAP) Final Campaign Report

The Continuous Light Absorption Photometer (CLAP) measures the aerosol absorption of radiation at three visible wavelengths; 461, 522, and 653 nanometers (nm). Data from this measurement is used in radiative forcing calculations, atmospheric heating rates, and as a prediction of the amount of equivalent black carbon in atmospheric aerosol and in models of aerosol semi-direct forcing. Aerosol absorption measurements are essential to modeling the energy balance of the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Highly-Efficient Microemulsion-Based Absorption Chillers for HVAC Application

Air conditioning is a necessity to achieve a comfortable, habitable home or office for many places in US. However, vapor compression air conditioners are largely made with chlorofluorocarbon refrigerants, or CFCs, which create problems for a world grappling with climate change. In addition, vapor compression air conditioners are driven by electricity. Cooling and heating represent one-third of building electrical energy consumption in US. An absorption chiller is different to vapor compression chillers or air conditioners because it doesn’t use conventional refrigerants, like CFC. Instead, they may use water as the refrigerant which is mixed with safe and nontoxic absorbents. The research performed in this project advanced the understanding of absorption cooling technology and its application in HVAC. Various technologies were explored to improve the performance of the desorber and absorber components in the absorption chillers.

42 ENGINEERING↗

Recyclable Design for Retaining High Solar Absorptivity of the Media in CSP

Efficient thermal energy storage is pivotal to lowering the levelized cost of electricity (LCOE) for Concentrating Solar Power (CSP) plants. In solid-particle systems, however, prolonged high-temperature service degrades particle solar absorptivity, eroding overall efficiency. This project demonstrates a hydrogen-assisted recovery process that reliably restores absorptivity to >90 %, offering a practical route to sustain long-term CSP performance. Bench-scale investigations mapped the reduction kinetics of optically faded particles across hydrogen concentrations, temperatures, and residence times. Coupling mass-spectrometric monitoring with machine-learning optimization minimized energy demand while maximizing absorptivity gain. The resulting process window—moderate hydrogen partial pressures, 15–30 min dwell times, and temperatures well below initial calcination levels—cuts energy consumption well below that of incumbent re-blackening methods. A prototype recovery reactor processed multiple 2 kg batches with repeatable outcomes, confirming scalability and operational robustness. Integrated techno-economic analysis indicates material and operating cost reductions exceeding 15 % relative to conventional particle replacement or chemical re-coating, translating directly into lower LCOE for next-generation CSP facilities. By uniting fundamental reaction-kinetics insight with pragmatic engineering, this work advances the solid-particle pathway, delivering a cost-effective, field-deployable solution to one of CSP’s key durability challenges and strengthening the commercial outlook for high-temperature renewable power.

14 SOLAR ENERGY↗

Absorption of Nitrogen during Pulsed Wave L-PBF of 17-4 PH Steel

In the fabrication of 17-4 PH by laser powder bed fusion (L-PBF) the well-documented occurrence of large amounts of retained austenite can be attributed to an elevated concentration of nitrogen present in the material. While the effects of continuous wave (CW) laser processing on in-situ nitrogen absorption characteristics have been evaluated, power modulated pulsed wave (PW) laser processing effects have not. In this study the effects of PW L-PBF processing of 17-4 PH on nitrogen absorption, phase composition, and mechanical performance are explored using commercially available PW L-PBF equipment and compared to samples produced by CW L-PBF. PW L-PBF samples fabricated in cover gas conditions with varying amounts of nitrogen demonstrated reduced absorption levels compared to those produced by CW L-PBF with no effects on phase composition and minimal effects on mechanical performance.

17-4 PH↗

Dynamical Control of Broadband Coherent Absorption in ENZ Films

Interferometric effects between two counter-propagating beams incident on an optical system can lead to a coherent modulation of the absorption of the total electromagnetic radiation with 100% efficiency even in deeply subwavelength structures. Coherent perfect absorption (CPA) rises from a resonant solution of the scattering matrix and often requires engineered optical properties. For instance, thin film CPA benefits from complex nanostructures with suitable resonance, albeit at a loss of operational bandwidth. In this work, we theoretically and experimentally demonstrate a broadband CPA based on light-with-light modulation in epsilon-near-zero (ENZ) subwavelength films. We show that unpatterned ENZ films with different thicknesses exhibit broadband CPA with a near-unity maximum value located at the ENZ wavelength. By using Kerr optical nonlinearities, we dynamically tune the visibility and peak wavelength of the total energy modulation. Our results based on homogeneous thick ENZ media open a route towards on-chip devices that require efficient light absorption and dynamical tunability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO 2 Absorption and Magnesium Carbonate Precipitation in MgCl 2 –NH 3 –NH 4 Cl Solutions: Implications for Carbon Capture and Storage

CO 2 absorption and carbonate precipitation are the two core processes controlling the reaction rate and path of CO 2 mineral sequestration. Whereas previous studies have focused on testing reactive crystallization and precipitation kinetics, much less attention has been paid to absorption, the key process determining the removal efficiency of CO 2 . In this study, adopting a novel wetted wall column reactor, we systematically explore the rates and mechanisms of carbon transformation from CO 2 gas to carbonates in MgCl 2 –NH 3 –NH 4 Cl solutions. We find that reactive diffusion in liquid film of the wetted wall column is the rate-limiting step of CO 2 absorption when proceeding chiefly through interactions between CO 2 (aq) and NH 3 (aq). We further quantified the reaction kinetic constant of the CO 2 –NH 3 reaction. Our results indicate that higher initial concentration of NH 4 Cl ( ≥2mol∙L -1 ) leads to the precipitation of roguinite [(NH 4 ) 2 Mg(CO 3 ) 2 ∙4H 2 O], while nesquehonite appears to be the dominant Mg-carbonate without NH 4 Cl addition. We also noticed dypingite formation via phase transformation in hot water. This study provides new insight into the reaction kinetics of CO 2 mineral carbonation that indicates the potential of this technique for future application to industrial-scale CO 2 sequestration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Milky Way’s hot gas kinematics: Signatures in current and future O vii absorption line observations

Detections of z ≈ 0 oxygen absorption and emission lines indicate the Milky Way hosts a hot (∼10{sup 6} K), low-density plasma extending ≳50 kpc into the Mily Way’s halo. Current X-ray telescopes cannot resolve the line profiles, but the variation of their strengths on the sky constrains the radial gas distribution. Interpreting the O vii Kα absorption line strengths has several complications, including optical depth and line of sight velocity effects. Here, we present model absorption line profiles accounting for both of these effects to show the lines can exhibit asymmetric structures and be broader than the intrinsic Doppler width. The line profiles encode the hot gas rotation curve, the net inflow or outflow of hot gas, and the hot gas angular momentum profile. We show how line of sight velocity effects impact the conversion between equivalent width and the column density, and provide modified curves of growth accounting for these effects. As an example, we analyze the LMC sight line pulsar dispersion measure and O vii equivalent width to show the average gas metallicity is ≳0.6Z{sub ⊙} and b ≳ 100 km s{sup −1}. Determining these properties offers valuable insights into the dynamical state of the Milky Way’s hot gas, and improves the line strength interpretation. We discuss future strategies to observe these effects with an instrument that has a spectral resolution of about 3000, a goal that is technically possible today.

79 ASTRONOMY AND ASTROPHYSICS↗

Strong Lyα emission in the proximate damped LYα absorption trough toward the quasar SDSS J095253.83+011422.0

SDSS J095253.83+011422.0 (J0952+0114) was reported by Hall et al. as an exotic quasar at z{sub em} = 3.020. In contrast to prominent broad metal-line emission with FWHM ∼ 9000 km s{sup −1}, only a narrow Lyα emission line is present with FWHM ∼ 1000 km s{sup −1}. The absence of a broad Lyα emission line has been a mystery for more than a decade. In this paper, we demonstrate that this absence is due to dark proximate damped Lyα absorption (PDLA) at z{sub abs} = 3.010 by identifying associated Lyman absorption line series from the damped Lyβ up to Ly9, as well as the Lyman limit absorption edge. The PDLA cloud has a column density of logN{sub HI}(cm{sup −2})=21.8±0.2, a metallicity of [Zn/H] > −1.0, and a spatial extent exceeding the narrow emission line region (NELR) of the quasar. With a luminosity of L{sub Lyα}∼10{sup 45} erg s{sup −1}, the residual Lyα emission superposed on the PDLA trough is two orders of magnitude stronger than found by previous reports. This is best explained as re-radiated photons arising from the quasar outflowing gas on a larger scale than in the NELR. The PDLA here, acting like a natural coronagraph, provides us with valuable insight into the illuminated gases in the vicinity of the quasar, which are usually hard to resolve due to their small size and the “seeing fuzz” of bright quasars. Notably, J0952+0114 analogs might be easily omitted in the spectroscopic surveys of DLAs and PDLAs because their damped Lyα troughs can be fully filled by additional strong Lyα emissions. Our preliminary survey shows that such systems are not very rare. They could potentially be a unique sample for probing strong quasar feedback phenomena in the early universe.

79 ASTRONOMY AND ASTROPHYSICS↗

GAMMA–GAMMA ABSORPTION IN THE BROAD LINE REGION RADIATION FIELDS OF GAMMA-RAY BLAZARS

The expected level of γγ absorption in the Broad Line Region (BLR) radiation field of γ -ray loud Flat Spectrum Radio Quasars (FSRQs) is evaluated as a function of the location of the γ -ray emission region. This is done self-consistently with parameters inferred from the shape of the spectral energy distribution (SED) in a single-zone leptonic EC-BLR model scenario. We take into account all geometrical effects both in the calculation of the γγ opacity and the normalization of the BLR radiation energy density. As specific examples, we study the FSRQs 3C279 and PKS 1510-089, keeping the BLR radiation energy density at the location of the emission region fixed at the values inferred from the SED. We confirm previous findings that the optical depth due to γγ absorption in the BLR radiation field exceeds unity for both 3C279 and PKS 1510-089 for locations of the γ -ray emission region inside the inner boundary of the BLR. It decreases monotonically, with distance from the central engine and drops below unity for locations within the BLR. For locations outside the BLR, the BLR radiation energy density required for the production of GeV γ -rays rapidly increases beyond observational constraints, thus making the EC-BLR mechanism implausible. Therefore, in order to avoid significant γγ absorption by the BLR radiation field, the γ -ray emission region must therefore be located near the outer boundary of the BLR.

79 ASTRONOMY AND ASTROPHYSICS↗