SEARCH · Engineering Papers

Results for “Variable Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Analysis and testing of two-dimensional slot nozzle ejectors with variable area mixing sections

Finite difference computer techniques have been used to calculate the detailed performance of air to air two-dimensional ejectors with symmetric variable area mixing sections and coaxial coverging primary nozzles. The analysis of the primary nozzle assumed correct expansion of the flow and is suitable for subsonic and slightly supersonic velocity levels. The variation of the mixing section channel walls is assumed to be gradual so that the static pressure can be assumed uniform on planes perpendicular to the axis. A test program was run to provide two-dimensional ejector test data for verification of the computer analysis. A primary converging nozzle with a discharge geometry of 0.125 inch x 8.0 inch was supplied with 600 SCFM of air at about 35 psia and 180 F. This nozzle was combined with two mixing section geometries with throat sizes of 1.25 inch x 8.0 inch and 1.875 inch x 8.0 inch and was tested at a total of 11 operating points.

Gilbert, G. B.↗

NASA NTRS1975

Analysis and testing of two-dimensional slot nozzle ejectors with variable area mixing sections

Finite difference computer techniques have been used to calculate the detailed performance of air-to-air two-dimensional ejectors with symmetric variable area mixing sections and coaxial converging primary nozzles. The analysis of the primary nozzle assumed correct expansion of the flow and is suitable for subsonic and slightly supersonic velocity levels. The variation of the mixing section channel walls is assumed to be gradual so that the static pressure can be assumed uniform on planes perpendicular to the axis. A test program was run to provide two-dimensional ejector test data for verification of the computer analysis. A primary converging nozzle with a discharge geometry of 3.18 mm x 203 mm was supplied with 0.340 kg/sec of air at about 2.43 bar and 356 K. This nozzle was combined with two mixing section geometries with throat sizes of 31.8 mm x 203 mm and 47.6 mm x 203 mm and was tested at a total of 11 operating points.

Gilbert, G. B.↗

NASA NTRS2013

A Suzaku X-ray Observation of One Orbit of the Supergiant Fast X-ray Transient IGR J16479-4514

We report on a 250 ks long X-ray observation of the supergiant fast X-ray transient (SFXT) IGR J16479-4514 performed with Suzaku in 2012 February. During this observation, about 80% of the short orbital period (P(sub orb) approximates 3.32 days) was covered as continuously as possible for the first time. The source light curve displays variability of more than two orders of magnitude, starting with a very low emission state (10(exp −13) erg / sq cm/s; 1-10 keV) lasting the first 46 ks, consistent with being due to the X-ray eclipse by the supergiant companion. The transition to the uneclipsed X-ray emission is energy dependent. Outside the eclipse, the source spends most of the time at a level of 6-7X10)(exp−12) erg/sq. cm/s) punctuated by two structured faint flares with a duration of about 10 and 15 ks, respectively, reaching a peak flux of 3-4X10(exp −11) erg/sq. cm./S, separated by about 0.2 in orbital phase. Remarkably, the first faint flare occurs at a similar orbital phase of the bright flares previously observed in the system. This indicates the presence of a phase-locked large scale structure in the supergiant wind, driving a higher accretion rate onto the compact object. The average X-ray spectrum is hard and highly absorbed, with a column density, NH, of 10*exp 23)/sq cm, clearly in excess of the interstellar absorption. There is no evidence for variability of the absorbing column density, except that during the eclipse, where a less absorbed X-ray spectrum is observed. A narrow Fe K-alpha emission line at 6.4 keV is viewed along the whole orbit, with an intensity which correlates with the continuum emission above 7 keV. The scattered component visible during the X-ray eclipse allowed us to directly probe the wind density at the orbital separation, resulting in rho(sub w)=7X10(exp −14) g/cubic cm. Assuming a spherical geometry for the supergiant wind, the derived wind density translates into a ratio M(sub w)/v(sub infinity) = 7X10(exp −17) Solar M/km which, assuming terminal velocities in a large range 500-3000 km/s, implies an accretion luminosity two orders of magnitude higher than that observed. As a consequence, a mechanism should be at work reducing the mass accretion rate. Different possibilities are discussed.

J164794514↗

NASA NTRS2021

Spectral Fidelity of Earth's Terrestrial and Aquatic Ecosystems

The Surface Biology and Geology (SBG) investigation will create global maps of spectral surface reflectance and emissivity at a cadence of 16 days or better, with coverage to address global questions about Earth's geology, cryosphere and ecosystems. The revolutionary potential poses a commensurate challenge: creating contiguous maps free from regional biases induced by atmosphere, observation geometry, or inversion error. This will require an accurate calibration with precise knowledge of each channel's spectral response. Here, we quantify the impact of spectral calibration on SBG's aquatic and terrestrial ecosystem objectives. We find that contemporary algorithms for ecosystem trait retrieval demand more accurate spectral calibration than historical missions. Errors due to drift or spatial nonuniformity in the wavelength calibration that have previously been considered acceptable can cause systematic errors larger than the instrument noise and of the same order as the variability SBG aims to measure. Moreover, their impact on atmospheric correction can induce climate-dependent systematic errors that thwart comparisons between ecosystems. These results underscore the importance of spectral response accuracy in SBG mission design.

imaging spectroscopy↗

NASA NTRSDate not supplied

Flight Results and Lessons Learned from the Starling Propulsion System

NASA’s Starling mission is a swarm of four 6U Cubesats flying in formation in Low Earth Orbit to demonstrate scalable swarm technologies, particularly related to crosslink networking. In order to maintain and modify their formation, the Starling spacecraft use a cold gas propulsion system called Hamlet, which provides each spacecraft with 30 m/s of delta-V, as well as attitude control during maneuvers. Hamlet is a fully self-contained system, incorporating propellant tanks, valves, nozzles, and control electronics. Most of the structure of Hamlet is a single piece of stereolithography-printed composite, which simplifies assembly and allows for unusual tank geometry that maximizes propellant volume in the allocated space. An extensive qualification campaign was conducted for Hamlet, including performance characterization that has been largely validated by in-flight measurements. Since the start of nominal mission operations in late summer 2023, Hamlet has conducted weekly or bi-weekly maneuvers of up to 0.29 m/s to assemble the swarm, maintain formation, and change swarm configurations as required by the experiments. Operations have not been without challenges, including a propellant leak on one unit and thrust variability issues on all four. This paper describes the design and implementation of Hamlet, as well as in-flight performance data, anomaly investigation and resolution, and lessons learned.

Starling↗

DOE OSTI2020

IGA-MPM: The Isogeometric Material Point Method

In this work, we propose the use of Isogeometric Analysis (IGA) within the context of the Material Point Method (MPM), and refer to the approach as IGA-MPM. We use the idea of IGA, and its instantiation based on Non-Uniform Rational B-Splines (NURBS), to build higher-order accurate and smooth approximation for MPM. Higher-order smoothness yields a continuous representation of the strain rate, and, as a result, prevents jumps in the stress and other history variables as the material points cross the element boundaries. Furthermore, NURBS can exactly represent all conic sections and the corresponding symmetries in the solution, which may be important in some applications. Several numerical examples of increasing complexity are presented, and show the ability of IGA-MPM to eliminate the well known cell-crossing instability of the conventional MPM. In addition, the examples presented demonstrate improved accuracy, convergence, and symmetry preservation of IGA-MPM compared to the conventional MPM, both for rectilinear and curved geometries.

42 ENGINEERING↗

DOE OSTI2025

Reexamining circular dichroism in photoemission from a topological insulator

The orbital angular momentum (OAM) of electron states is an essential ingredient for topological and quantum geometric quantities in solids. For example, Dirac surface states with helical spin- and orbital-angular momenta are a hallmark of a 3D topological insulator. Angle-resolved photoemission spectroscopy (ARPES) with variable circular light polarization, known as circular dichroism (CD), has been assumed to be a direct probe of OAM and, by proxy, of the Berry curvature of electronic bands in energy- and momentum-space. Indeed, topological surface states have been shown to exhibit angle-dependent CD (CDAD), and more broadly, CD is often interpreted as evidence of spin-orbit coupling. Meanwhile, it is well-established that CD originates from the photoemission matrix elements, which can have extrinsic contributions related to the experimental geometry and the inherently broken inversion symmetry at the sample surface. Therefore, it is important to broadly examine CD-ARPES to determine the scenarios in which it provides a robust probe of intrinsic material physics. We performed CD-ARPES on the canonical topological insulator Bi 2 ⁢Se 3 over a wide range of incident photon energies. Not only do we observe angle-dependent CD in the surface states, as expected, but we also find CD of a similar magnitude in virtually all bulk bands. Since OAM is forbidden by inversion symmetry in the bulk, we conclude this originates from symmetry-breaking in the photoemission process. Comparison with theoretical calculations supports this view and suggests that “hidden” OAM—localized to atomic sites within each unit cell—contributes significantly. Additional effects, including inter-atomic interference and final-state resonances, are responsible for the rapid variation of the CDAD signal with photon energy.

Sidilkover, Ittai [Tel Aviv University, Tel Aviv (↗

DOE OSTI2025

Reexamining Circular Dichroism in Photoemission From a Topological Insulator

The orbital angular momentum (OAM) of electron states is an essential ingredient for topological and quantum geometric quantities in solids. For example, Dirac surface states with helical spin- and orbital-angular momenta are a hallmark of a 3D topological insulator. Angle-resolved photoemission spectroscopy (ARPES) with variable circular light polarization, known as circular dichroism (CD), has been assumed to be a direct probe of OAM and, by proxy, of the Berry curvature of electronic bands in energy- and momentum-space. Indeed, topological surface states have been shown to exhibit angle-dependent CD (CDAD), and more broadly, CD is often interpreted as evidence of spin-orbit coupling. Meanwhile, it is well-established that CD originates from the photoemission matrix elements, which can have extrinsic contributions related to the experimental geometry and the inherently broken inversion symmetry at the sample surface. Therefore, it is important to broadly examine CD-ARPES to determine the scenarios in which it provides a robust probe of intrinsic material physics. We performed CD-ARPES on the canonical topological insulator $\mathrm{Bi}_2\mathrm{Se}_3$ over a wide range of incident photon energies. Not only do we observe angle-dependent CD in the surface states, as expected, but we also find CD of a similar magnitude in virtually all bulk bands. Since OAM is forbidden by inversion symmetry in the bulk, we conclude this originates from symmetry-breaking in the photoemission process. Comparison with theoretical calculations supports this view and suggests that $\textit{hidden}$ OAM - localized to atomic sites within each unit cell - contributes significantly. Additional effects, including inter-atomic interference and final-state resonances, are responsible for the rapid variation of the CDAD signal with photon energy.

FOS: Physical sciences↗

NASA NTRS1999

TRMM Precipitation Radar Reflectivity Profiles Compared to High-Resolution Airborne and Ground-Based Radar Measurements

In this paper, TRMM (Tropical Rainfall Measuring Mission Satellite) Precipitation Radar (PR) products are evaluated by means of simultaneous comparisons with data from the high-altitude ER-2 Doppler Radar (EDOP), as well as ground-based radars. The comparison is aimed primarily at the vertical reflectivity structure, which is of key importance in TRMM rain type classification and latent heating estimation. The radars used in this study have considerably different viewing geometries and resolutions, demanding non-trivial mapping procedures in common earth-relative coordinates. Mapped vertical cross sections and mean profiles of reflectivity from the PR, EDOP, and ground-based radars are compared for six cases. These cases cover a stratiform frontal rainband, convective cells of various sizes and stages, and a hurricane. For precipitating systems that are large relative to the PR footprint size, PR reflectivity profiles compare very well to high-resolution measurements thresholded to the PR minimum reflectivity, and derived variables such as bright band height and rain types are accurate, even at high PR incidence angles. It was found that for, the PR reflectivity of convective cells small relative to the PR footprint is weaker than in reality. Some of these differences can be explained by non-uniform beam filling. For other cases where strong reflectivity gradients occur within a PR footprint, the reflectivity distribution is spread out due to filtering by the PR antenna illumination pattern. In these cases, rain type classification may err and be biased towards the stratiform type, and the average reflectivity tends to be underestimated. The limited sensitivity of the PR implies that the upper regions of precipitation systems remain undetected and that the PR storm top height estimate is unreliable, usually underestimating the actual storm top height. This applies to all cases but the discrepancy is larger for smaller cells where limited sensitivity is compounded by incomplete beam filling. Users of level three TRMM PR products should be aware of this scale dependency.

Heymsfield, G. M.↗

DOE OSTI2024

Recent and future developments in pultrusion technology with consideration for curved geometries: A review

Herein this paper examined the current state and future developments in pultrusion with particular emphasis on its application in curved part manufacturing. The relationship between factors such as resin chemistry, fiber characteristics, and die geometry that influences the properties of pultruded product were highlighted. Moreover, the specific challenges associated with pultruding curved parts such as the complexities in achieving uniformity and structural integrity in such geometries were discussed. The review emphasized mold design, process improvement, adaptive control systems for precise resin impregnation and material selection to address these challenges. Additionally, the paper suggests the integration of real-time monitoring and data analytics as ways to enhance quality control during curved parts pultrusion. These advancements will help to overcome challenges specific to curved pultrusion and make the process more efficient. Other manufacturing techniques such as filament winding, thermoforming, pulforming were mentioned as alternatives to curved parts pultrusion. The review also explores pultruded variable curvature processes, highlighting some notable patents and article related to this subject matter. Production of pultruded variable curvature parts was seen as a key driver that can shape the future of pultrusion. Finally, the paper anticipates future trends, with sustainability, customization, integration of advanced materials, and development of techniques for pultrusion of composites parts.

42 ENGINEERING↗

DOE OSTI2021

Spectral Fidelity of Earth's Terrestrial and Aquatic Ecosystems

The Surface Biology and Geology (SBG) investigation will create global maps of spectral surface reflectance and emissivity at a cadence of 16 days or better, with coverage to address global questions about Earth's geology, cryosphere and ecosystems. The revolutionary potential poses a commensurate challenge: creating contiguous maps free from regional biases induced by atmosphere, observation geometry, or inversion error. This will require an accurate calibration with precise knowledge of each channel's spectral response. In this work, we quantify the impact of spectral calibration on SBG's aquatic and terrestrial ecosystem objectives. We find that contemporary algorithms for ecosystem trait retrieval demand more accurate spectral calibration than historical missions. Errors due to drift or spatial nonuniformity in the wavelength calibration that have previously been considered acceptable can cause systematic errors larger than the instrument noise and of the same order as the variability SBG aims to measure. Moreover, their impact on atmospheric correction can induce climate-dependent systematic errors that thwart comparisons between ecosystems. These results underscore the importance of spectral response accuracy in SBG mission design.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

Redefining Eligibility by Analyzing Canceled Intraoperative Radiotherapy as a Boost for Patients Undergoing Breast-Conserving Treatment

Background: Intraoperative radiotherapy (IORT) with a 50-kV x-ray is used for a tumor bed boost during breast-conserving surgery. This study evaluated the anatomicosurgical factors associated with cancellation of planned IORT. Methods: Patient eligibility for the study included age of 20 years or older, compatibility for lumpectomy, and ductal carcinoma in situ or stages 1–3 invasive carcinoma. All the patients underwent magnetic resonance imaging (MRI) and multidisciplinary team evaluations. Resection margins were assessed by frozen pathology. Pre- and intraoperative variables were compared between the IORT and IORT-cancellation groups. Results: A total of 434 patients underwent surgeries for IORT between August 2014 and December 2017. For 90 of these patients, IORT was canceled because of repeated positive margins leading to a large cavity or total mastectomy (n = 27), insufficient cavity-skin distance (n = 14), satellite lesions leading to a large cavity or total mastectomy (n = 12), MRI findings of a large primary tumor or uncertain margins leading to a large cavity (n = 6), cavity geometry unsuitable for IORT (n = 6), subareolar tumor extension (n = 6), tumor abutting the pectoralis muscle (n = 3), patient refusal (n = 5), intraoperative confirmation of bilateral breast cancer (n = 3) or benign pathology (n = 3), device malfunction (n = 3), or scheduling difficulty (n = 2). A tumor larger than 2 cm (P = 0.014) and the presence of satellite lesions (P = 0.014) were independent predictors of IORT cancellation. Conclusions: Surgical procedures resulting in large cavities were the leading cause of IORT cancellation. Multidisciplinary evaluations using MRI were critical for completion of IORT procedures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2024

Probabilistic Analysis of Long-Term Degradation of Microwave Cavity Flow Sensor

We are investigating a microwave resonant cavity transducer for flow sensing in the vessel of a high temperature fluid advanced reactor (AR), such as a molten salt cooled reactor (MSCR) or a sodium fast reactor (SFR). This transducer is a hollow metallic cylindrical cavity, with the flat wall of the cylinder flexible enough to undergo microscopic deflection due to dynamic fluid pressure. Membrane deflection leads to a shift in the resonant frequency, which can be detected with a spectrum analyzer. We have performed a proof-of-concept experiment of flow sensing with the transducer in liquid sodium at 340°C in impinging liquid jet geometry. The transducer remained in liquid sodium for 70 days. After removal, no structural damage was observed, and the expected transducer response was verified in a water test. Because long-term (multi-year) experimental tests of transducer resilience to harsh environment are not practical, we have developed a probabilistic model of creep to estimate transducer resilience to the harsh environment. The probabilistic model considers diffusion creep under the condition of high temperature and low stress, where the stress and temperature are allowed to be random variables with Gaussian distributions. Using the probabilistic model, we estimate inelastic membrane deflections due to creep for several temperature ranges. We conclude that for temperatures less than 650°C, creep has negligible long-term effect on the transducer performance. Since a yellowish residue was observed on the transducer surface after 70 days of immersion in liquid sodium, we have investigated possible evidence of corrosion. Chromium depletion is a typical indicator of the corrosion process in stainless steel. Scraping off a residue from the transducer and performing scanning electron microscopy (SEM) with energy dispersive analysis (EDS) did not find any chromium in the residue. Approximately 60% of the residue consisted of copper, which can be attributed to contamination of sodium due to powder residue from machining of copper and brass components of the transducer.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1986

Variable area radial turbine fabrication and test program

A variable area radial turbine with a moveable nozzle sidewall was experimentally evaluated. The turbine was designed for an advanced variable capacity gas turbine rotorcraft engine. The turbine has a mass flow rate of 2.27 kg/sec (5.0 lbs/sec), and a rotor inlet temperature of 1477K (2200 F). Testing was conducted at a reduced inlet temperature, but the aerodynamic parameters and Reynolds numbers were duplicated. Overall performance was obtained for a range of nozzle areas from 50% to 100% of the maximum area. The test program determined the effect on performance of: (1) Moving the hub or shroud sidewall; (2) Sidewall-vane clearance leakage; (3) Vaneless space geometry change; and (4) Nozzle cooling flows. Data were obtained for a range of pressure ratios and speeds and are presented in a number of performance maps.

Rogo, C.↗

NASA NTRS1999

On the Fast Evaluation Method of Temperature and Gas Mixing Ratio Weighting Functions for Remote Sensing of Planetary Atmospheres in Thermal IR and Microwave

Evaluation of weighting functions in the atmospheric remote sensing is usually the most computer-intensive part of the inversion algorithms. We present an analytic approach to computations of temperature and mixing ratio weighting functions that is based on our previous results but the resulting expressions use the intermediate variables that are generated in computations of observable radiances themselves. Upwelling radiances at the given level in the atmosphere and atmospheric transmittances from space to the given level are combined with local values of the total absorption coefficient and its components due to absorption of atmospheric constituents under study. This makes it possible to evaluate the temperature and mixing ratio weighting functions in parallel with evaluation of radiances. This substantially decreases the computer time required for evaluation of weighting functions. Implications for the nadir and limb viewing geometries are discussed.

Ustinov, E. A.↗

NASA NTRS2010

Initial Experiments of High-Speed Drive System Windage Losses

High speed gearing performance is very important to the overall drive system efficiency. Certain losses such as gear meshing and bearing drag can be minimized by design changes such as pressure angle of the gears and the geometry and type of bearings being used. One component that can have a large effect on the overall performance of high-speed drive systems is the parasitic drag known as gear windage. This loss mechanism is not well understood and minimizing this component is usually accomplished through much trial and error. The results presented in this paper will document some of the design parameter effects on the amount of windage losses. A new test facility at NASA Glenn has been assembled to systematically study the design variables. Results from recent tests will be presented. The tests are for a single gear, with and without lubricants, and some initial studies using shrouds

Handschuh, Robert F.↗

NASA NTRS2011

Initial Experiments of High-Speed Drive System Windage Losses

Handschuh, Robert F.↗

NASA NTRS2023

Impacts of SLR Ground Station Geographic Distribution on Time-Variable Gravity Recovery

Satellite laser ranging (SLR) continues to be an essential technique for estimating Earth's low-degree gravity field. The Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On (GRACE-FO) do not accurately recover certain coefficients, which are needed for quantifying large-scale mass redistribution as part of Earth's time-variable gravity (TVG) field. In case of an inter-mission gap, as with GRACE and GRACE-FO, SLR can continue to provide mass-change measurements. The current SLR ground network consists of around 40 stations. However, these are not uniformly distributed and the quantity and quality of data varies widely between sites. We anticipate that future stations will improve SLR-derived gravity estimates and we investigate their potential impact on the solution in this simulation study. A single new station that enhances network geometry, particularly in the Southern hemisphere, increases the sensitivity of the network by up to 12% for certain coefficients. The addition of 5 new future stations improves certain coefficients up to 18%. We find new stations are limited in their ability to decorrelate certain coefficients regardless of their location, but that adding more data and increasing network uniformity still benefits the overall solution.

E S Tucker↗