Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

The structure and emission spectrum of a nonradiative shock wave in the Cygnus Loop

The ultraviolet spectrum of a Balmer-line filament located just outside the main body of optical filaments in the Cygnus Loop confirms the nonradiative shock wave theory for its origin. This theory is extended to include the hydrogen two-photon continuum, and the possibility of slow electron-ion equilibration in the postshock gas is considered. The shock velocity is inferred from the H-alpha profile. Comparison of model calculations with optical and ultraviolet spectra favors Coulomb equilibration behind a 170 km/s shock over models with rapid equilibration due to plasma turbulence. Elemental abundances in the preshock gas are found to be typical of diffuse interstellar clouds. The ram pressure behind the shock is higher than the pressures inferred for bright optical filaments. It is suggested that the bright optical filaments are regions of thermally unstable cooling behind shocks faster than the shock velocities inferred from their optical and ultraviolet spectra.

Raymond, J. C.↗

Numerical simulation of flow through inlets/diffusers with terminal shocks

Two-dimensional Euler and Navier-Stokes solutions of the flow through three inlet/diffuser configurations with terminal shock systems are reported. Calculations without bleed indicate that the terminal shock location is very sensitive to the outflow back pressure. For cases where there are no available experimental results, it becomes difficult to estimate the back pressure that will result in a terminal shock. Estimates based on quasi-one-dimensional analysis are not found adequate for complex two-dimensional flows. It is found that since the flow downstream of the terminal shock is subsonic, and what happens at the outflow boundary affects the flow inside the inlet, enough of the subsonic diffuser must be modeled to accurately predict the terminal shock region. The diffuser portion should be fairly long with the outflow boundary occurring in a region of more or less uniform flow to be able to prescribe a uniform back pressure. The third configuration studied was investigated with and without incorporating bleed in the code. It is found that the use of bleed stabilizes the shock location and allows solutions which without bleed result in unstarting of the inlet. Comparisons are made with available experimental data.

Talcott, N. A., Jr.↗

Scale lengths in quasi-parallel shocks

A review was carried out of ISEE and Voyager spacecraft magnetometer data to determine if quasi-parallel bow shocks are really broad, disordered regions. The key parameter was the deceleration scale (thickness, Lp) across which random energy would need to increase and a localized electrostatic field (E) would be present. Lp would define the breadth of the shock and be associated with a plasma deceleration. The ISEE 1 satellite collected data on the electron density, bulk speed, magnetic intensity, and electron temperature in November 1977 during five traverses of the bow shock. Similar data were gathered from an interplanetary shock wave in 1981. The evidence supported the concept of a plasma deceleration across a thin layer (Lp) in both types of shocks. The layers were about 50 times (interplanetary) and 20 times (earth) thinner than surrounding magnetic fluctuation regions. It is asserted that the regions of deceleration, although much thinner, are the actual shocks and not the entire regions of magnetic fluctuations.

Scudder, J. D.↗

Energetic ion acceleration at collisionless shocks

An example is presented from a test particle simulation designed to study ion acceleration at oblique turbulent shocks. For conditions appropriate at interplanetary shocks near 1 AU, it is found that a shock with theta sub B n = 60 deg is capable of producing an energy spectrum extending from 10 keV to approx. 1 MeV in approx 1 hour. In this case total energy gains result primarily from several separate episodes of shock drift acceleration, each of which occurs when particles are scattered back to the shock by magnetic fluctuations in the shock vicinity.

Decker, R. B.↗

Distant heliospheric results on interplanetary shock propagation

Solar wind plasma data from Pioneers 10 and 11 and the Pioneer Venus Orbiter for 1978 to mid-1981 have been examined for forward shock signatures, and associations have been made with solar flares. (IMP 8 shocks from early 1978 have similarly been included for completeness). The numbers of flare-associated shocks observed at the various heliocentric distances of the spacecraft (ranging from 0.7 to 24 AU) are deduced, and the shock strengths and energies are given. Significantly fewer shocks associated with flares are observed at the greater distances, presumably because more cases have decreased below the threshold for inclusion. Three cases in which the same shock was probably detected by spacecraft at different heliocentric distances indicate deceleration and weakening at the greater distances.

Mihalov, J. D.↗

Supercritical airfoil drag reduction by passive shock wave/boundary layer control in the Mach number range .75 to .90

Airfoils operating in the transonic region are subject to large increases in drag due to shock wave/boundary layer interactions. The concept of passive shock wave/boundary layer control seeks drag reduction by placing a thin cavity with a porous top surface at the airfoil chordwise position where a shock wave would normally occur. The higher pressure behind the shock wave circulates flow through the cavity to the lower pressure ahead of the shock wave. The effects from this circulation prevent boundary layer separation and reduce entropy increases through the shock wave. In this investigation this concept is studied at a freestream Mach number range of .75 and .90. The Mach number distributions over the model, the wake impact pressure surveys used to determine profile drag and schlieren photographs for 2.8 percent porosity and solid airfoil cases are presented and compared. Results indicate that the profile drag coefficient can be reduced by as much as 40 percent through the use of this passive drag control system.

Nagamatsu, H. T.↗

Corequake and shock heating model of the 5 March 1979 gamma-ray burst

Ramaty et al. (1980) have proposed a model of a neutron-star corequake and subsequent shock heating of the atmosphere to account for the gamma-ray burst of March 5, 1979. This model is elaborated by examining the overall energetics and characteristics of the radiation-dominated gas shocks under the assumption of thermodynamic equilibrium, taking into account the electron-positron pair production behind the shock. Using values for the density typical of those expected for neutron-star crusts (100-10,000 g/cu cm) and shock velocities characteristic of the sound speed (40,000-100,000), shock luminosities are obtained comparable to those required if the burst originated in the LMC. In addition, the fraction of energy deposited in electron-positron pairs is in good agreement with observation. Uneven shock heating between the polar and equatorial regions of the neutron star due to the presence of a dipole magnetic field, coupled with a rotation rate of 8 s, can also naturally account for the pulsating phase of the burst.

Ellison, D. C.↗

AOTV bow shock location

Hypersonic bow-shock location and geometry are of central importance to the aerodynamics and aerothermodynamics of aeroassisted orbital transfer vehicles (AOTVs), but they are difficult to predict for a given vehicle configuration. This paper reports experimental measurements of shock standoff distance for the 70 deg cone AOTV configuration in shock-tunnel-test flows at Mach numbers of 3.8 to 7.9 and for angles of attack from 0 deg to 20 deg. The controlling parameter for hypersonic bow-shock standoff distance (for a given forebody shape) is the mean normal-shock density ratio. Values for this parameter in the tests reported are in the same range as those of the drag-brake AOTV perigee regime. Results for standoff distance are compared with those previously reported in the literature for this AOTV configuration. It is concluded that the AOTV shock standoff distance for the conical configuration, based on frustrum (base) radius, is equivalent to that of a sphere with a radius about 35 percent greater than that of the cone; the distance is, therefore, much less than reported in previous studies. Some reasons for the discrepancies between the present and previous are advanced. The smaller standoff distance determined here implies there will be less radiative heat transfer than was previously expected.

Desautel, D.↗

Molecular processes in a high temperature shock layer

Models of the shock layer encountered by an Aeroassisted Orbital Transfer Vehicle require as input accurate cross sections and rate constants for the atomic and molecular processes that characterize the shock radiation. From the estimated atomic and molecular densities in the shock layer and the expected residence time of 1 m/s, it can be expected that electron-ion collision processes will be important in the shock model. Electron capture by molecular ions followed by dissociation, e.g., O2(+) + e(-) yields 0 + 0, can be expected to be of major importance since these processes are known to have high rates (e.g., 10 to the -7th power cu/cm/sec) at room temperature. However, there have been no experimental measurements of dissociative recombination (DR) at temperatures ( 12000K) that are expected to characterize the shock layer. Indeed, even at room temperature, it is often difficult to perform experiments that determine the dependence of the translational energy and quantum yields of the product atoms on the electronic and vibrational state of the reactant molecular ions. Presented are ab initio quantum chemical studies of DR for molecular ions that are likely to be important in the atmospheric shock layer.

Guberman, S. L.↗

On ion acceleration in interplanetary quasi-perpendicular shock waves

The kinematic and pitch angle scattering constraints for multiple shock encounters to occur are investigated. The results suggest that (1) large particle anisotropies and a large number of shock encounters are not mutually exclusive and (2) solar wind ions are not directly injected into the nearly perpendicular interplanetary shock acceleration process. Also, the average number of shock encounters required to accelerate an ion between two energies is calculated. The results are consistent with the shock geometry dependence observed in interplanetary shock spike and corotating interaction region associated energetic ion events.

Pesses, M. E.↗

Shock metamorphism and petrography of the Shergotty achondrite

The shock history of the Shergotty meteorite has been evaluated by analyzing the observable shock effects. In addition, the results of petrographic and mineralogical analyses of new Shergotty subsamples are presented. The overall modal composition of these subsamples is similar to that of the other Shergotty samples, except for the rather high whitlockite content. The shock effects observed in the mineral constituents include mosaicism, deformation bands, planar fractures, and mechanical twin lamellae in clinopyroxene; isotropization of plagioclase with very rare remnants of birefringence; and planar deformation structures, mosaicism, and strongly reduced birefringence in quartz. Other shock effects include mechanical twinning of ilmenite, and localized in situ melting of neighboring minerals at the contact of low and high density phases. The observed shock effects could be explained by a single shock event.

Stoeffler, D.↗

Shock structure measured in a transonic fan using laser anemometry

Shock structure measurements acquired in a low aspect ratio transonic fan rotor are presented and analyzed. The rotor aspect ratio is 1.56 and the design tip relative Mach number is 1.38. The rotor flowfield was surveyed at near maximum efficiency and near stall operating conditions. Intra-blade velocity measurements acquired with a laser fringe anemometer on blade-to-blade planes in the supersonic region from 10 to 60 percent span are presented. The three-dimensional shock surface determined from the velocity measurments is used to determine the shock surface normal Mach number in order to properly calculate the ideal shock jump conditions. The ideal jump conditions are calculated based upon the Mach numbers measured on a surface of revolution and based upon the normal Mach number to indicate the importance of accounting for shock three dimensionality in turbomachinery design. Comparison of the shock locations with those predicted by a 3-D Euler code showed very good agreement and indicated the usefulness of integrating computational and experimental work to enhance the understanding of the flow physics occurring in transonic turbomachinery passages.

Wood, Jerry R.↗

Optical Radiation from Shock-Compressed Materials

Recent observations of shock-induced radiation from oxides, silicates, and metals of geophysical interest constrain the shock-compressed temperature of these materials. The relationships between the temperature inferred from the observed radiation and the temperature of the shock-compressed film or foil and/or window were investigated. Changes of the temperature field in each target component away from that of their respective shock-compressed states occur because of: shock-impedance mismatch between target components; thermal mismatch between target components; surface roughness at target interfaces; and conduction within and between target components. In particular, conduction may affect the temperature of the film/foil window interface on the time scale of the experiments, and so control the intensity and history of the dominant thermal radiation sources in the target. This type of model was used to interpret the radiation emitted by a variety of shock-compressed materials and interfaces.

Svendsen, Robert F., Jr.↗

On broadband shock associated noise of supersonic jets

The characteristics and generation mechanisms of noise associated with the interactions of turbulence with the quasi-periodic broadband shock cells of supersonic jet engines are reviewed. The noise possesses broadband spectra and directionality that are completely different from noise caused by turbulence. Experimental data have shown that broadband noise is most prominent in the forward arc, with peak frequencies being a function of the observation angle and the pressure mismatch in the engine. The noise originates in the engine as turbulence-shock interactions occur during downstream movement. Features of the phased point-source array model and the large turbulence structures-shock cells interaction model are defined and model predictions are compared with experimental data on noise sources. Only a scaling of the noise component is found to be currently possible. More complete characterization depends on consideration of the jet temperature and analysis of turbulence-shock interactions, broadband shock and screech tones and shock noise in several flow configurations.

Tam, C. K. W.↗

Numerical simulation by TVD schemes of complex shock reflections from airfoils at high angle of attack

The shock-capturing capability of total variation diminishing (TVD) schemes is demonstrated for a more realistic complex shock-diffraction problem for which the experimental data are available. Second-order explicit upwind and symmetric TVD schemes are used to solve the time-dependent Euler equations of gas dynamics for the interaction of a blast wave with an airfoil at high angle-of-attack. The test cases considered are a time-dependent moving curved-shock wave and a contant moving planar-shock wave impinging at an angle-of-attack 30 deg on a NACA 0018 airfoil. Good agreement is obtained between isopycnic contours computed by the TVD schemes and those from experimental interferograms. No drastic difference in flow-field structure is found between the curved- and planar-shock wave cases, except for a difference in density level near the lower surface of the airfoil. Computation for cases with higher shock Mach numbers is also possible. Numerical experiments show that the symmetric TVD scheme is less sensitive to the boundary conditions treatment than the upwind scheme.

Moon, Young J.↗

A quarter century of collisionless shock research

This review highlights conceptual issues that have both governed and reflected the direction of collisionless shock research in the past quarter century. These include MHD waves and their steepening, the MHD Rankine-Hugoniot relations, the super-critical shock transition, nonlinear oscillatory wave trains, ion sound anomalous resistivity and the resistive-dispersive transition for subcritical shocks, ion reflection and the structure of supercritical quasi-perpendicular shocks, the earth's foreshock, quasi-parallel shocks, and finally, shock acceleration processes.

Kennel, C. F.↗

Planetary bow shocks

Planetary bow shocks provide insight into both the behavior of collisionless shocks and the nature of the planetary obstacle responsible for creating those bow shocks. This review paper first presents a survey of the microstructure of planetary bow shocks using data obtained at Mercury, Venus, the earth, Mars, Jupiter, and Saturn. When it examines the correspondence of the behavior of the shock jumps with that predicted by theory, and the differences between gas dynamic and magnetohydrodynamic solutions. Finally, it examines the information available from observations of the location of the bow shock about the nature of the solar wind-planetary interaction.

Russell, C. T.↗

Subcritical collisionless shock waves

The development history of theoretical accounts of low Mach number collisionless shock waves is related to recent observational advancements, with attention to weaker shocks in which shock steepening is limited by dispersion and/or anomalous resistivity and whose character is primarily determined by the dispersive properties of the ambient plasma. Attention has focused on nearly perpendicular shocks where dispersive scale lengths become small and the associated cross-field currents become strong enough to generate significant plasma wave turbulence. A number of oblique, low Mach number bow shocks have been studied on the basis of data from the ISEE dual spacecraft pair, allowing an accurate determination of shock scale lengths.

Mellott, M. M.↗