Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sample Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Spin dynamics in the itinerant antiferromagnet SrCr 2 ⁢As 2

SrCr 2 ⁢As 2 is an itinerant antiferromagnet in the same structural family as the SrFe 2 ⁢As 2 high-temperature superconductors. Here, we report our calculations of exchange-coupling parameters 𝐽 𝑖⁢𝑗 for SrCr 2 ⁢As 2 using a static linear-response method based on first-principles electronic-structure calculations. We find that the dominant nearest-neighbor exchange coupling 𝐽 1 >0 is antiferromagnetic whereas the next-nearest-neighbor exchange coupling 𝐽 2 <0 is ferromagnetic with 𝐽 2 /𝐽 1 = −0.68, reinforcing the checkerboard in-plane magnetic structure. Thus, unlike other transition-metal arsenides based on Mn, Fe, or Co, we find no competing magnetic interactions in SrCr 2 ⁢As 2 , which aligns with experimental findings. Moreover, the orbital resolution of exchange interactions shows that 𝐽 1 and 𝐽 2 are dominated by direct exchange mediated by the Cr 𝑑 orbitals. To validate the calculations we conduct inelastic neutron-scattering measurements on powder samples that show steeply dispersive magnetic excitations arising from the magnetic Γ points and persisting up to energies of at least 175 meV. The spin-wave spectra are then modeled using the Heisenberg Hamiltonian with the theoretically calculated exchange couplings. In conclusion, the calculated neutron-scattering spectra are in good agreement with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing Time-dependent Dark Energy with the Flux Power Spectrum of the Ly$α$ Forest

Herein we present new simulations of the flux power spectrum of the Ly$α$ forest as a means to investigate the effects of time-dependent dark energy on structure formation. We use a linearized parameterization of the time-dependence of the dark energy equation of state and sample the parameters ($w_0, w_a$) from the extrema of the allowed observational values as determined by the Planck results. Each chosen ($w_0, w_a$) pair is then used in a high-resolution, large-scale cosmological simulation run with a modified version of the publicly available SPH code GADGET-2 . From each of these simulations we extract synthetic Ly$α$ forest spectra and calculate the flux power spectrum. We use the $k$-sample Anderson–Darling test to analyze the effects of dark energy on the Ly$α$ forest. We compare each dark energy power spectrum to that due to a cosmological constant power spectrum. We find, however, that there is only a marginal effect of the choice of allowed dark energy models on the flux power spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of leakage neutron spectra for zirconium with D-T neutrons and validation of evaluated nuclear data

Integral neutronics experiments have been a powerful tool and method for examining the reliability of evaluated nuclear data. In the present paper, the accuracy of evaluated nuclear data for Zirconium has been validated by comparing measured leakage neutron spectra with calculated ones. Leakage neutron spectra from the irradiation of D-T neutrons on Zirconium samples were experimentally measured at 60° and 120° by using a time-of-flight method. Theoretical calculations are carried out by Monte Carlo neutron transport code MCNP-4C with evaluated nuclear data of the ENDF/B-VII.0, ENDF/B-VIII.0, JENDL-4.0 and CENDL-3.1 libraries. From the comparisons, it is found that the calculations with JENDL-4.0 gives better agreements with the experiments at 60° while a large discrepancies are observed in the 4–13.5 MeV energy range at 120°. However, the calculated spectra using the data from ENDF/B-VII.0, ENDF/B-VIII.0 and CENDL-3.1 libraries showed some discrepancies with the measured ones, especially caused by the difference of the elastic and inelastic angular distributions and the secondary neutron energy distributions in the continuum inelastic scattering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cosmic-ray-produced Kr in St. Severin core AIII

Kr isotopic abundances in 10 samples from core AIII of the St. Severin chondrite are reported, and the variation with depth of cosmic-ray produced Kr is discussed. It is shown that the ratio (Kr-78/Kr-83)c changes with depth and can be used as an irradiation hardness monitor. Cosmic-ray-produced Kr and Ne in the St. Severin core are compared with ratios observed in bulk chondrites. A linear correlation between (Ne-22/Ne-21)c and (Kr-78/Kr-83)c exists for bulk samples of chondrites of varying preatmospheric size, but does not exist in the St. Severin core. The calculated Kr-83 production rates, P83, are similar in H, L, and LL chondrites for samples of comparable shielding conditions. However, P83 rates increase by a factor of about 2 with shielding depth. The maximum observed P83 values correspond to (Kr-78/Kr-83)c factor of about 2 with shielding depth. The maximum observed P83 values correspond to (Kr-78/Kr-83)c less than about 0.14.

Lavielle, B.↗

On the Quality of the Nimbus 7 LIMS Version 6 Ozone for Studies of the Middle Atmosphere

The Nimbus 7 Limb Infrared Monitor of the Stratosphere (LIMS) radiance profile dataset of 1978/79 was reconditioned and reprocessed to Version 6 (V6) profiles of temperature and species that are improved significantly over those from Version 5 (V5). The LIMS V6 dataset was archived for public use in 2002. Improvements for its ozone include: (1) a more accurate accounting for instrument and spacecraft motion effects in the radiances, (2) the use of better spectroscopic line parameters for its ozone forward model, (3) retrievals of all its scans, (4) more accurate and compatible temperature versus pressure profiles (or T(p)), which are needed for the registration of the ozone radiances and for the removal of temperature effects from them, and (5) a better accounting for interfering species in the lower stratosphere. The retrieved V6 ozone profiles extend from near cloud top altitudes to about 80 km and from 64S to 84N latitude with better sampling along the orbit than for the V5 dataset. Calculated estimates of the single-profile precision and accuracy are provided for the V6 ozone from this study. Precision estimates based on the data themselves are of order 3% or better from 1 to 30 hPa. Estimates of total systematic error for a single profile are hard to generalize because the separate sources of error may not all be of the same sign and they depend somewhat on the atmospheric state. It is estimated that the V6 zonal mean ozone distributions are accurate to within 9% to 7% from 50 hPa to 3 hPa, respectively. Effects of a temperature bias can be significant and may be present at 1 to 2 hPa though. There may be ozone biases of order 10% at those levels due to possible biases of up to +2 K, but there is no indication of a similar problem elsewhere in the stratosphere. Simulation studies show that the LIMS retrievals are also underestimating slightly the small amplitudes of the atmospheric temperature tides, which affect its retrieved day/night ozone differences. There are small biases in the middle to lower stratosphere for the ascending versus descending node LIMS ozone, due principally to not accounting for the asymmetric weighting of its radiances across the tangent layer. The estimates of total accuracy were assessed by comparing the daily zonal mean LIMS ozone distributions against those from the Nimbus 7 SBUV Version 8 (V8) dataset for the same period. Generally, the LIMS V6 ozone agrees well with SBUV, except perhaps in the tropical lower stratosphere where the LIMS ozone is less. Still, the accuracy for LIMS V6 ozone in the lower stratosphere is improved over that found for LIMS V5, as indicated by several LIMS comparisons with ECC ozonesonde profiles. The LIMS V6 ozone is considered especially suitable for detailed studies of large-scale stratospheric processes above the 100-hPa level. Comparison of diurnal, photochemical model calculations with the monthly-averaged, upper stratospheric ozone observed from LIMS V6 indicates only a slight ozone deficit for the model at about 2 hPa. However, that deficit exhibits little to no seasonal variation and is in good agreement with similar model comparisons for a seasonal time series of ozone obtained with ground-based microwave instruments. Because the LIMS V6 ozone in the lower stratosphere has improved accuracy and sampling versus that of V5, it should now be possible to conduct quantitative studies of ozone transport and chemistry for the northern hemisphere, polar stratospheric winter of 1978/79 a time period when the catalytic loss of ozone due to reactive chlorine should not have been a major factor for the Arctic region.

Remsberg, Ellis↗

One-bond 13 C– 13 C spin-coupling constants in saccharides: a comparison of experimental and calculated values by density functional theory using solid-state 13 C NMR and X-ray crystallography

Methyl aldohexopyranosides were 13 C-labeled at contiguous carbons, crystallized, and studied by single-crystal X-ray crystallography and solid-state 13 C nuclear magnetic resonance (NMR) spectroscopy to examine the degree to which density functional theory (DFT) can calculate one-bond 13C–13C spin-coupling constants ( 1 J CC ) in saccharides with sufficient accuracy to permit their use in MA'AT analysis, a newly-reported hybrid DFT/NMR method that provides probability distributions of molecular torsion angles in solution (Zhang et al., J. Phys. Chem. B, 2017, 121, 3042–3058; Meredith et al., J. Chem. Inf. Model., 2022, 62, 3135–3141). Experimental 1 J CC values in crystalline samples of the doubly 13 C-labeled compounds were measured by solid-state 13 C NMR and compared to those calculated from five different DFT models: (1) 1 J CC values calculated from single structures identical to those observed in crystalline samples by X-ray crystallography (all atom refinement); (2) 1 J CC values calculated from the single structures in (1) but after Hirshfeld atom refinement (HAR); (3) 1 J CC values calculated from the single structures in (1) after DFT-optimization of hydrogen atoms only; and (4 and 5) 1 J CC values calculated in rotamers of torsion angle θ 2 (C1–C2–O2–O2H) or ω(C4–C5–C6–O6) from which either specific or generalized parameterized equations were obtained and used to calculate 1 J CC values in the specific θ 2 or ω rotamers observed in crystalline samples. Good qualitative agreement was observed between calculated 1 J CC values and those measured by solid-state 13 C NMR regardless of the DFT model, but in no cases were calculated 1 J CC values quantitative, differing (over-estimated) on average by 4–5% from experimental values. These findings, and those reported recently from solution NMR studies (Tetrault et al., J. Phys. Chem. B 2022, 126, 9506–9515), indicate that improvements in DFT calculations are needed before calculated 1 J CC values can be used directly as reliable constraints in MA'AT analyses of saccharides in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of Low-Temperature Reduction Degradation of Alumina-Containing Hematite Solid Solution Below 550 °C

Low-temperature reduction degradation (LTRD) of sinter has an adverse effect on blast furnace permeability, and it is mainly caused by the stress produced in the reduction process of hematite. This stress is strongly influenced by alumina dissolved in hematite crystal lattice. In this work, the experiments were conducted to investigate the effect of alumina dissolved in hematite solid solution (H{sub ss}) on LTRD by reducing H{sub ss} below 550 °C. Thermogravimetric analysis (TGA), X-ray diffraction (XRD), and optical microscope have been used to characterize the mass change and mineral change of samples, respectively. Jade software has been used to calculate the micro strain in magnetite for quantitatively studying the change of strain in reducing process. The results show that alumina was unfavorable to the reduction of H{sub ss} on thermodynamics, and the starting reduction temperature of H{sub ss} containing 6.0 mol pct alumina was 28 °C higher than that of pure hematite. According to the calculation on kinetics, the generation rate of stress was accelerated by dissolving alumina into hematite crystal lattice. The apparent activation energy of reduction reaction lowered from 47.89 to 28.07 kJ/mol with the increase of alumina content from 0.0 to 6.0 mol pct. The addition of alumina also increased the stress in the reduction products, and this stress was released in the form of LTRD.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron diffraction discriminates between models for the nanoarchitecture of graphene sheets in glassy carbon

Glassy carbon is a chemically inert, biocompatible, disordered material with the graphene sheet as its basic building block. Structural characterisation techniques have so far been unable to provide definitive distinction between the many proposed models for its structure. Computer based simulation methods have made a step forward by predicting structure from interaction potentials, but the results are sensitive to the choice of the potential. Here we use the white neutron beam of the Spallation Neutron Source at Oak Ridge National Laboratory coupled with the SNAP time-of-flight diffractometer to sample the reciprocal space of glassy carbon and calculate accurate radial distribution functions. From the radial distribution information, we determine graphene sheet dimensions, registration, curvature, and assess defect content to rank the proposed structures in terms of their agreement with experimental data. In this work, we find that the recent models derived from empirical potentials give the best agreement.

36 MATERIALS SCIENCE↗

Electron backscatter diffraction helps direct calculation of magnetocrystalline anisotropy energy in API 5L steels

Highlights: • Experimental evidence of the capability of EBSD to accurately estimate MAE of API 5L steels. • MAE can be calculated directly from raw EBSD data for reduced sample sizes. • Number of grains sufficient to estimate MAE from EBSD is in the order of several hundreds. • The use of equivalent orientations increases drastically the accuracy of MAE estimations. • EBSD helps explain origin of the observed correlation between MAE and Barkhausen noise. - Abstract: This paper shows evidence of the capability of electron backscatter diffraction (EBSD) to accurately estimate the magnetocrystalline anisotropy energy (MAE) of API 5L steels. The crystallographic texture of five circular steel samples was characterized by X-ray global texture and EBSD microtexture measurements. The average MAE of each one of these samples was estimated from the set of individual grain orientations obtained from orientation maps measured by EBSD. The angular dependence of EBSD-derived MAE was compared with predictions made from X-ray texture and Barkhausen noise (BHN) measurements. The average MAE determined from the EBSD data is in good agreement with the predictions made from X-ray and BHN measurements for all the studied samples. This agreement can be explained by the fact that the number of grains used to predict the average MAE from the EBSD results was statistically sufficient to reproduce the MAE predicted by the other two methods. The EBSD measurement strategy for the accurate MAE estimation was established in terms of parameters such as the number of individual grain orientations to be measured, the sample's texture acuity and grain size, the use of equivalent orientations given by the statistical orthorhombic symmetry of the studied samples, and different measurement planes.

36 MATERIALS SCIENCE↗

Digital pulse processing for NaI(Tl) detectors

We apply two different post-processing techniques to digital pulses induced by photons in a NaI(Tl) detector and compare the obtained energy resolution to the standard analog approach. Our digital acquisition approach is performed using a single-stage acquisition with a fast digitizer. Both the post-processing techniques we propose rely on signal integration. In the first, the pulse integral is calculated by directly numerically integrating the pulse digital samples, while in the second the pulse integral is estimated by a model-based fitting of the pulse. Our study used a 7.62 cm×7.62 cm cylindrical NaI(Tl) detector that gave a 7.60% energy resolution (at 662 keV), using the standard analog acquisition approach, based on a pulse shaping amplifier. The new direct numerical integration yielded a 6.52% energy resolution. The fitting approach yielded a 6.55% energy resolution, and, although computationally heavier than numerical integration, is preferable when only the early samples of the pulse are available. We also evaluated the timing performance of a fast–slow detection system, encompassing an EJ-309 and a NaI(Tl) scintillator. Here, we use two techniques to determine the pulse start time: constant fraction discrimination (CFD) and adaptive noise threshold timing (ANT), for both the analog and digital acquisition approach. With the analog acquisition approach, we found a system time resolution of 5.8 ns and 7.3 ns, using the constant fraction discrimination and adaptive noise threshold timing, respectively. With the digital acquisition approach, a time resolution of 1.2 ns was achieved using the ANT method and 3.3 ns using CFD at 50% of the maximum, to select the pulse start time. Finally, the proposed direct digital readout and post-processing techniques can improve the application of NaI(Tl) detectors, traditionally considered ‘slow’, for fast counting and correlation measurements, while maintaining a good measurement of the energy resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural Polymorphism in “Kesterite” Cu 2 ZnSnS 4 : Raman Spectroscopy and First-Principles Calculations Analysis

This work presents detailed structural and vibrational characterization of different Cu 2 ZnSnS 4 (CZTS) polymorphs (space groups: I$\bar{4}$, P$\bar{4}$2c, and P$\bar{4}$2m), using Raman spectroscopy and first-principles calculations. Multiwavelength Raman measurements on bulk crystalline CZTS samples permitted determination of the vibrational modes of each polymorph structure, with frequencies matching well with the results obtained from simulations. Lastly, the results present Raman spectra fingerprints as well as experimental references for the different polymorph modifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering the formation of spin-defects from first principles

The full realization of spin qubits for quantum technologies relies on the ability to control and design the formation processes of spin defects in semiconductors and insulators. We present a computational protocol to investigate the synthesis of point-defects at the atomistic level, and we apply it to the study of a promising spin-qubit in silicon carbide, the divacancy (VV). Our strategy combines electronic structure calculations based on density functional theory and enhanced sampling techniques coupled with first principles molecular dynamics. We predict the optimal annealing temperatures for the formation of VVs at high temperature and show how to engineer the Fermi level of the material to optimize the defect’s yield for several polytypes of silicon carbide. Our results are in excellent agreement with available experimental data and provide novel atomistic insights into point defect formation and annihilation processes as a function of temperature.

36 MATERIALS SCIENCE↗

Spatial emission tomography reconstruction using Pitman-Yor process

In this paper, we address the problem of emission tomography spatial reconstruction in three dimensions following a Bayesian nonparametric approach. Our model makes use of a generalization of the Dirichlet process called Pitman-Yor process. The problem in this approach is to deal with the infinite representation of the distribution in the inference. So we propose an efficient Markov Chain Monte-Carlo sampling scheme which is able to generate samples from the posterior distribution of the activity distribution. An application to 3D-PET reconstruction is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Raman scattering in Si/SiGe nanostructures: Revealing chemical composition, strain, intermixing, and heat dissipation

We present a quantitative analysis of Raman scattering in various Si/Si{sub 1-x}Ge{sub x} multilayered nanostructures with well-defined Ge composition (x) and layer thicknesses. Using Raman and transmission electron microscopy data, we discuss and model Si/SiGe intermixing and strain. By analyzing Stokes and anti-Stokes Raman signals, we calculate temperature and discuss heat dissipation in the samples under intense laser illumination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Generalizing the flash technique in the front-face configuration to measure the thermal diffusivity of semitransparent solids

In this work, we have extended the front-face flash method to retrieve simultaneously the thermal diffusivity and the optical absorption coefficient of semitransparent plates. A complete theoretical model that allows calculating the front surface temperature rise of the sample has been developed. It takes into consideration additional effects, such as multiple reflections of the heating light beam inside the sample, heat losses by convection and radiation, transparency of the sample to infrared wavelengths, and heating pulse duration. Measurements performed on calibrated solids, covering a wide range of absorption coefficients (from transparent to opaque) and thermal diffusivities, validate the proposed method.

42 ENGINEERING↗

Piecewise interaction picture density matrix quantum Monte Carlo

The density matrix quantum Monte Carlo (DMQMC) set of methods stochastically samples the exact N-body density matrix for interacting electrons at finite temperature. We introduce a simple modification to the interaction picture DMQMC (IP-DMQMC) method that overcomes the limitation of only sampling one inverse temperature point at a time, instead allowing for the sampling of a temperature range within a single calculation, thereby reducing the computational cost. At the target inverse temperature, instead of ending the simulation, we incorporate a change of picture away from the interaction picture. The resulting equations of motion have piecewise functions and use the interaction picture in the first phase of a simulation, followed by the application of the Bloch equation once the target inverse temperature is reached. We find that the performance of this method is similar to or better than the DMQMC and IP-DMQMC algorithms in a variety of molecular test systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A study of explosive-induced fracture in polymethyl methacrylate (PMMA)

The fracture response of geologic materials is of interest for applications, including geothermal energy harnessing and containment of underground explosions. To better understand the explosively induced fracture response of geomaterials, polymethyl methacrylate (PMMA) was used as a transparent rock surrogate to allow imaging of internal shock propagation and fracture growth processes. Experiments were conducted using high-speed shadowgraphy and photon Doppler velocimetry (PDV), which were compared to numerical simulations. Experiments measured fractures produced in 304.8mm × 304.8mm × 304.8mm PMMA cubes with two simultaneously initiated detonators. The cubes were subjected to varying amounts and directions of externally applied uniaxial stresses, including no stress, 2 MPa stress, and 20 MPa stress. The fracture radius as a function of time was extracted from the high-speed videos. Post-test images of the PMMA cubes aided in the determination of three-dimensional effects not directly imaged by the cameras. The surface velocity history and the shock response captured in PDV and the high-speed videos were compared to the simulated explosive-induced shock response. The simulation results indicate that the shock drives the fracture for the first 20 μs corresponding to a fracture radius of approximately 15 mm in the experiments. The gas-driven fracture extent was estimated analytically using an equilibrium stress distribution calculated after the shock wave propagation through the sample. Reduction in the gas pressure due to the leakage of the explosive products through the crack as a function of time was accounted for. In conclusion, the estimated fracture lengths were in agreement with the experimentally observed fracture lengths.

15 GEOTHERMAL ENERGY↗