Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUPERCONDUCTING MAGNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Finite-Element Analysis of the Strain Distribution Due to Bending in a REBCO Coated Conductor for Canted Cosine Theta Dipole Magnet Applications

High-current cables using REBCO tapes can be used to develop high-field dipole magnets. However, the strain accumulated during cable fabrication and coil winding may reduce the critical current of the conductor. Therefore, it is important to properly consider the strain when designing high-field magnets. We used structural finite-element analysis (FEA) to predict the strain experienced by a REBCO tape during bending in configurations relevant to the fabrication of high-field accelerator magnets, in particular, the mechanical strain generated during cable fabrication and winding in a canted-cosθ dipole configuration. We considered two different cable options: (A) Flat tape that lay in the mandrel channel and (B) a REBCO tape helically wound around a circular copper core, the typical configuration of the conductor in round core cable (CORC). Strain accumulated during tape winding is studied for different core diameters and winding tilt angles. FEA longitudinal strain results were compared with the simulations for configuration A, where higher strain was observed experimentally. Configuration B was verified indirectly by comparing experimentally measured I c with the one predicted (based on the longitudinal strain) as a function of the bending diameter. Good agreement was found up to a bending diameter of 30 mm. The presented results will help to understand the impact of bending on REBCO tapes and CORC wires to develop high-field magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Software Architecture and Hardware Organization in Mu2e Solenoid Field Mapping System

Herein, the Mu2e field mapping system is designed to produce high accuracy field maps of the detector solenoid used in the experiment. The data acquisition system is mobile and uses a self-propelled mapper with rotating arms equipped with 3D Hall probes. The measurements require not only accurate magnetic field readouts, but also accurate locations of all Hall probes while measuring data. The latter is accomplished by using the laser tracker to measure positions of several retroreflectors on the field mapper during data acquisition. The measurement process requires scanning the whole space inside the large solenoid and takes many hours to complete, which necessitates its full automation. The automation software includes control of the mapper, readout of Hall and NMR probes and control of a laser tracker, including prediction of retroreflector positions and execution of quality control checks. The software architecture and data acquisition hardware of the field mapping system are described, with special attention given to control of the laser tracker and its integration with the rest of the system.

3d hall probes↗

Dome of magnetic order inside the nematic phase of sulfur-substituted FeSe under pressure

The pressure dependence of the structural, magnetic, and superconducting transitions and of the superconducting upper critical field were studied in sulfur-substituted Fe ( Se 1 - x S x ) . We performed resistance measurements on single crystals with three substitution levels ( x = 0.043 , 0.096, 0.12) under hydrostatic pressures up to 1.8 GPa and in magnetic fields up to 9 T and were compared to data on pure FeSe. Our results illustrate the effects of chemical and physical pressure on Fe ( Se 1 - x S x ). Furthermore, on increasing sulfur content, magnetic order in the low-pressure range is strongly suppressed to a small domelike region in the phase diagrams. But, T s is much less suppressed by sulfur substitution, and T c of Fe ( Se 1 - x S x ) exhibits similar nonmonotonic pressure dependence with a local maximum and a local minimum present in the low-pressure range for all x . The local maximum in T c coincides with the emergence of the magnetic order above T c . At this pressure the slope of the upper critical field decreases abruptly, which may indicate a Fermi-surface reconstruction. The minimum of T c correlates with a broad maximum of the upper critical field slope normalized by T c .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Remanent Magnetic Flux Distribution in Superconducting-Ferromagnetic Layered Heterostructures

Stacks of superconducting tape, made of second-generation coated conductors, present an interesting alternative to bulk superconductors. The layered geometry allows incorporation of other functional, namely ferromagnetic, materials. The ferromagnetic material changes the field configuration within the superconductor and can be used to shape or divert the flux density from its interior. This can be used to optimise the remanent flux density after magnetisation. FEM simulations are employed to test the performance of a variety of superconductor/ferromagnet structures and explain the role of the ferromagnetic material in the composite structure. Cases where trapped field is much higher and lower than remanent magnetisation of the ferromagnetic material are considered, showing that performance can be enhanced or maintained by using ferromagnetic material while reducing the usage of costly superconducting tape.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing and manipulating magnetic and 2D quantum materials using ultrafast laser and high harmonic sources

The ability to probe the full dynamic response of quantum materials on the length- and time-scales (Å to attoseconds on up) fundamental to charge, spin and phonon interactions is leading to a host of new discoveries. The coupled interactions between charges, spins, orbital and lattice degrees of freedom are key to determining the state of a material, whether metallic, insulating, superconducting or magnetic. Under thermal equilibrium conditions these states can be tuned by varying the temperature, pressure, chemical doping or dimensionality. However, their inherent complexity and rich phase landscape make them challenging to understand or manipulate deterministically. Fortunately, ultrafast light sources have undergone remarkable advances in recent years, achieving what was merely a dream three decades ago, i.e., full coherent control of light fields spanning the THz to the X-ray regions. Here, these new capabilities are providing powerful new tools for coherently manipulating and probing quantum materials using light. Recent advances in high harmonic generation (HHG) have provided new techniques for uncovering new phases and couplings in 2D and magnetic materials, using femtosecond lasers to coherently manipulate and tune the properties and interactions in the material, and HHG as a probe to map out these new phases and couplings. There are several beautiful recent observations of exciting new states in materials using light, but in some cases, the limited experimental data points made it challenging to validate an interpretation. The new ability of ultrafast HHG-based photoemission and magneto-optic spectroscopies to precisely probe multiple phases, electronic and magnetic order parameters, when combined with scanning the laser excitation fluence, is allowing us to map how material phases, magnetic states, and electron-phonon-spin couplings in these delicate materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critical Current Density and AC Susceptibility of Bi{sub 1.6}Pb{sub 0.4}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} Superconductor with Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} Nanomaterial

The juxtaposition of superconductivity and magnetism is an interesting research topic due to the exclusivity nature of both phenomena. In this paper, we report the effect of nanosized (~ 5 nm) nickel zinc ferrite Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (NZFO) on Bi{sub 1.6}Pb{sub 0.4}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} (Bi-2223) superconductor. Bi-2223 powders were prepared using the co-precipitation method. Samples with starting formula Bi{sub 1.6}Pb{sub 0.4}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}(Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x} for x = 0 to 0.1 wt% have been prepared. The structure, microstructure, electrical resistance, and AC susceptibility were determined. The transport critical current density, J{sub ct}, was measured using the 1 μV/cm criterion. The non-added sample sintered for 48 h showed the highest zero resistance temperature, T{sub c-zero} (105 K) and J{sub ct} of 1.83 A cm{sup −2} at 40 K. The x = 0.02 wt% sample sintered for 48 h (T{sub c-zero} = 103 K) showed the highest J{sub ct} of 5.30 A cm{sup −2} at 40 K. The peak temperature of the imaginary part of the complex susceptibility, T{sub p}, increased with sintering time and nanoparticle addition, indicating full flux penetration occurred at higher temperatures and improved intergrain coupling. NZFO nanoparticle did not suppress the transition temperature but it improved the transport critical current density by more than five times indicating it enhanced flux pinning and connectivity between grains in the Bi-2223 phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fragmentation of fast Josephson vortices and breakdown of ordered states by moving topological defects

Topological defects such as vortices, dislocations or domain walls define many important effects in superconductivity, superfluidity, magnetism, liquid crystals, and plasticity of solids. Here we address the breakdown of the topologically-protected stability of such defects driven by strong external forces. We focus on Josephson vortices that appear at planar weak links of suppressed superconductivity which have attracted much attention for electronic applications, new sources of THz radiation, and low-dissipative computing. Our numerical simulations show that a rapidly moving vortex driven by a constant current becomes unstable with respect to generation of vortex-antivortex pairs caused by Cherenkov radiation. As a result, vortices and antivortices become spatially separated and accumulate continuously on the opposite sides of an expanding dissipative domain. This effect is most pronounced in thin film edge Josephson junctions at low temperatures where a single vortex can switch the whole junction into a resistive state at currents well below the Josephson critical current. In conclusion, our work gives a new insight into instability of a moving topological defect which destroys global long-range order in a way that is remarkably similar to the crack propagation in solids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting Effects in Optimization of Magnetic Penetration Thermometers for X-ray Microcalorimeters

Like MMCs, MPTs enable high energy microcalorimeters with zero bias power dissipation and potential resolution < 1 eV. MPTs can provide d(phi)/dT as large as 1000 (Phi)(sub 0)/K, with no excess noise, thereby reducing the importance of SQUID noise. Long coherence length in a Type-I superconducting MoAu film offers multiple advantages for efficient flux expulsion in MPT. Region of steepest d(phi)/dT is the Meissner effect in the small device; flux is expelled/penetrates to minimize free energy. Steepness of transition can be engineered with choice of film thickness and coil pitch relative to lambda(sub eff)(0), ratio of T/T(sub c), and bias circuit inductance.

Stevenson, T. R.↗

MAARSS: Magnet Architectures and Active Radiation Shielding Study

Protecting humans from space radiation is a major hurdle for human exploration of the solar system and beyond. Like on Earth, large magnetic fields surrounding a spaceship would deflect charged particles away from the habitat region and reduce the radiation dose to acceptable limits. The objective of this study is to determine the feasibility of current state of the art (SOA) high temperature superconducting (HTS) magnets as a means to protect crew from space radiation exposure on long duration missions beyond Low Earth Orbit (LEO). The study will look at architecture concepts to deflect high energy Galactic Cosmic Radiation (GCR) and Solar Proton Events (SPEs). Mass, power, and shielding efficiency will be considered and compared with current passive shielding capabilities. This report will walk the reader through several designs considered over the one year study and discuss the multiple parameters that should be evaluated for magnetic shielding. The study team eventually down-selects to a scalable light weight solenoid architecture that is launchable and then deployable using magnetic pressure to expand large diameter coils. Benefitting from the low temperature and high vacuum environment of deep space, existing high-temperature superconductors make such radiation shields realistic, near-term technical developments.

Westover, Shayne C.↗

Spontaneous Electromagnetic Superconductivity of Vacuum in a Strong Magnetic Field: Evidence from the Nambu-Jona-Lasinio Model

Using an extended Nambu-Jona-Lasinio model as a low-energy effective model of QCD, we show that the vacuum in a strong external magnetic field (stronger than 10{sup 16} T) experiences a spontaneous phase transition to an electromagnetically superconducting state. The unexpected superconductivity of, basically, empty space is induced by emergence of quark-antiquark vector condensates with quantum numbers of electrically charged rho mesons. The superconducting phase possesses an anisotropic inhomogeneous structure similar to a periodic Abrikosov lattice in a type-II superconductor. The superconducting vacuum is made of a new type of vortices which are topological defects in the charged vector condensates. The superconductivity is realized along the axis of the magnetic field only. We argue that this effect is absent in pure QED.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Universal Single-Ion Physics in Spin–Orbit-Coupled d 5 and d 4 Ions

We have identified six new 4d 4 and 4d 5 compounds with isolated RuCl 6 octahedra, with formulas (HMA) 4 RuCl 6 ·Cl ( 1 ; MA = methylamine), (HGly) 4 RuCl 6 ·Cl ( 2 ; gly = glycine), (HGly) 3 RuCl 6 ·2H 2 O ( 3 ), (NH 4 ) 2 RuCl 6 ( 4 ), (HPy) 2 RuCl 6 ( 5 ; py = pyridine), and H 2 (4,4'-bpy)RuCl 6 ( 6 ; 4,4'-bpy = 4,4'-bipyridine). We find that the temperature-dependent magnetization is well described by single-ion physics in the presence of spin–orbit coupling and negligible superexchange interactions. Further, we find that many compounds in the literature are also well described by single-ion physics, and our results demonstrate the importance of considering single-ion physics when evaluating candidate geometric frustrated magnets in the presence of spin–orbit coupling.

optics, thermal conductivity, defects, charge tran↗

Enhanced Pinning Properties of the Bilayers of YDy{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 7−δ} by SrZrO{sub 3} Nanoparticles through Low Fluorine Metallorganic Solution Deposition

Bilayered YDy{sub 0.5}Ba{sub 2}Cu{sub 3.6}O{sub 7−δ} superconducting films with a thickness of about 1 μ were deposited by metallorganic deposition method, an interlayer of secondary phase of SrZrO{sub 3} (SZO) and BaZrO{sub 3} (BZO) were inserted. Detailed growth mechanism studies of these structures as well as superconducting properties in different temperatures and magnetic field range (0–5 T) were investigated. Structural analysis showed that bilayer structure changed clearly the growth mechanism of YBCO. The SZO interlayer smoothens the film surface. Magnetic measurements of superconducting properties demonstrated that the critical temperature decreases slightly when both of SZO and BZO interlayer were inserted. This indicates a growing strain effect at the layer interfaces. The critical current densities as well as pining forces of bilayered YDy{sub 0.5}Ba{sub 2}Cu{sub 3.6}O{sub 7−δ} in the entire applied temperature and magnetic field range were enhanced by the insertion of SZO layer and decreased when BZO layer is introduced. The enhancement of the pinning properties is explained by the dense flux pinning in layered YDyBCO superconductors; this result may give further improvements in the current-carrying capability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interaction-induced topological phase transition and Majorana edge states in low-dimensional orbital-selective Mott insulators

Topological phases of matter are among the most intriguing research directions in Condensed Matter Physics. It is known that superconductivity induced on a topological insulator’s surface can lead to exotic Majorana modes, the main ingredient of many proposed quantum computation schemes. In this context, the iron-based high critical temperature superconductors are a promising platform to host such an exotic phenomenon in real condensed-matter compounds. The Coulomb interaction is commonly believed to be vital for the magnetic and superconducting properties of these systems. This work bridges these two perspectives and shows that the Coulomb interaction can also drive a canonical superconductor with orbital degrees of freedom into the topological state. Namely, we show that above a critical value of the Hubbard interaction the system simultaneously develops spiral spin order, a highly unusual triplet amplitude in superconductivity, and, remarkably, Majorana fermions at the edges of the system.

36 MATERIALS SCIENCE↗

Magnetic effects in sulfur-decorated graphene

The interaction between two different materials can present novel phenomena that are quite different from the physical properties observed when each material stands alone. Strong electronic correlations, such as magnetism and superconductivity, can be produced as the result of enhanced Coulomb interactions between electrons. Two-dimensional materials are powerful candidates to search for the novel phenomena because of the easiness of arranging them and modifying their properties accordingly. In this work, we report magnetic effects in graphene, a prototypical non-magnetic two-dimensional semi-metal, in the proximity with sulfur, a diamagnetic insulator. In contrast to the well-defined metallic behaviour of clean graphene, an energy gap develops at the Fermi energy for the graphene/sulfur compound with decreasing temperature. This is accompanied by a steep increase of the resistance, a sign change of the slope in the magneto-resistance between high and low fields, and magnetic hysteresis. A possible origin of the observed electronic and magnetic responses is discussed in terms of the onset of low-temperature magnetic ordering. These results provide intriguing insights on the search for novel quantum phases in graphene-based compounds.

Science & Technology - Other Topics↗