Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STONES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Topology driven and soft phonon mode enabled Na-ion diffusion in quaternary chalcogenides, Na 3 ZnGaX 4 (X = S, and Se)

The compounds Na 3 ZnGaX 4 (X = S, Se) are potential solid electrolyte materials in sodium-based batteries, which have certain advantages over oxide materials and have shown significant ionic conductivity at ambient temperature. In this paper, we bring out atomic-level features of the diffusion process in these new materials using the microscopic techniques of inelastic neutron scattering (INS), quasielastic neutron scattering (QENS), and ab initio molecular dynamics (AIMD) simulations. The insights obtained from these techniques are unique and not available from other macroscopic experiments. Neutron scattering experiments have been performed at temperatures from 100 to 700 K. The simulations have been carried out up to 900 K. We have calculated the phonon spectra and the space–time correlation functions and found good agreement with the results of the neutron scattering experiments. The simulations enable detailed analysis of the atomic-site dependent dynamical information. We observe low-energy phonon modes of ~6 meV involving the vibrations of certain Na atoms in the lattice. This reveals that the Na at 32g Wyckoff sites (Na2) has sufficiently shallow potential among the two available crystallographic sites. This shallow potential facilitates diffusion. Furthermore, the specific structural topology of the network of interconnected zig-zag chains of the Na2 atomic sites provides the low-barrier energy pathways for diffusion. A small fraction of vacancy defects appears essential for diffusion. We further observe that the Na2 atoms undergo jump-like diffusion to the vacant next or the 2nd next neighbour sites at ~4 Å. While the QENS experiments reveal the jump-like diffusion and its time scale, detailed analysis of the AIMD simulations shows that the jumps appear mostly along zig-zag chains of the Na2 sites in the tetragonal ab-plane, as well as between the chains along the c-axis. In conclusion, the net diffusion is essentially 3-dimensional, with little anisotropy despite the anisotropy of the tetragonal crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multifunctional textured graphene-based coatings on elastomeric gloves for chemical protection

Nanotechnology offers a variety of new tools for the design of next-generation personal protective equipment (PPE). One example is the use of two-dimensional materials as coatings that enhance the performance and ergonomics of elastomeric gloves designed to protect users from hazardous chemicals. Desirable features in such coatings may include molecular barrier function, liquid droplet repellency, stretchability for compatibility with the elastomer, breathability, and an ultrathin profile that preserves the user's manual dexterity and tactile sensation. The present work explores the potential of engineered graphene-based films with out-of-plane texturing as a novel platform to meet these multifold requirements. Graphene-based films in different formulations were fabricated from water-borne inks by vacuum filtration and solution casting methods on glove-derived nitrile rubber substrates. The various coatings were then subjected to tests of molecular permeation by model volatile organic compounds, droplet contact angle, breathability, and mechanical stability during stretching and solvent immersion. The films dramatically improve the barrier properties of glove-derived nitrile. The out-of-plane graphene texturing imparts stretchability through microscale folding/unfolding, while also enhancing droplet repellency in some cases through a lotus-like roughening effect. The combined results suggest that engineered textured graphene-based films are a promising platform for creating multifunctional coatings for a next generation of chemically protective gloves and other elastomer-based PPE.

36 MATERIALS SCIENCE↗

Exploring a new synthesis route to lithium-excess disordered rock salt (DRX) cathode materials

Lithium-excess disordered rock salt (DRX) materials are promising candidates for Co/Ni-free Li-ion cathodes due to their high specific energy (800+ W h kg −1 ) and compositional flexibility. DRX cathodes are typically synthesized using solid-state reactions, which are difficult to scale and provide little-to-no control over particle morphology. Here, to address this bottleneck, the present study reports a two-step, solution-based reaction route to prepare Mn/Ti-based DRX oxyfluoride cathodes with nominal compositions of Li 1.25 Mn 0.5 Ti 0.3 O 1.95 F 0.05 and Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 . More specifically, a glycine–nitrate combustion reaction is used to produce a lithiated transition metal oxide, which is further reacted with LiF to produce high-purity DRX powders. Remarkably, this route yields 80–90% pure DRX after annealing for 1 h at 800–1000 °C, and 19 F solid-state nuclear magnetic resonance (ssNMR) spectra demonstrate that F− anions are successfully incorporated into the DRX structure. Cathodes prepared using this approach exhibit promising electrochemical performance, with Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 attaining reversible capacities ∼210 mA h g −1 and moderate cycling stability in half cells (65% capacity retention over 150 cycles). Overall, these results demonstrate that utilizing novel metal oxide precursors presents a viable and largely unexplored method to produce high-performance Co/Ni-free DRX cathodes.

25 ENERGY STORAGE↗

From lignin to market: a technical and economic perspective of reductive depolymerization approaches

Lignin has grown into one of the main candidates to replace fossil-based resources as it is the largest renewable source of aromatic building blocks. The complex structure of polymeric lignin, however, requires depolymerization to simpler building blocks for the chemical industry. One of the most promising depolymerization approaches is reductive depolymerization of which two process configurations are currently studied in pilot scale installations for upscaling to industrial scale: (i) reductive catalytic fractionation (RCF), and (ii) reductive catalytic depolymerization (RCD). Both technical and techno-economic aspects will be covered within this review, discussing the advantages and challenges of both approaches regarding processing, production costs, product output, and applications. In this regard, RCF benefits from its decreased energy and solvent consumption linked with being a one-step process and delivers a product with a high monomer content (∼25–45 wt%). RCD, on the other hand, has the advantage of continuous processing and reduced catalyst fouling and delivers a product that mainly consists of oligomers (<10 wt% monomers). The complete overview of both processes presented here addresses their potential, and can guide future researchers, policy makers and companies to make thoughtful decisions on lignin valorization.

09 BIOMASS FUELS↗

Navigating the Path to Autonomy: Real-World Lessons from an Air-Free Self-Driving Laboratory

While autonomous experimentation has promise to accelerate discovery in physcial sciences, the real-world integration of predictive models and experimentation is non-trivial. Here we describe the genesis of a self-driving laboratory (SDL) for air-sensitive chemistry at Argonne National Laboratory and demonstrate the experimental design considerations needed for high-throughput experiments before predictive models can lead to scientific discovery. Our SDL was designed to explore battery electrolyte stability. Our final SDL utilized plate readers in a glovebox with a nitrogen atmosphere to perform kinetic assays and screen hundreds of battery-relevant solvents. However, the roadmap to autonomy and airfree-friendly experimentation required the complex evaluation of several spectroscopic and chromatographic methods. The greatest experimental challenges were (a) developing long-term sampling methods that remained air-free; (b) accelerating kinetics to advance reactivity projections; and (c) ensuring labware compatibility with nonaqueous solvents used in battery chemistry. Our experiences highlight the practical gap between closed-loop aspirations and the realities of chemical discovery, offering lessons on the challenges of transferring every day laboratory workflows to autonomy. These results suggest a more realistic blueprint for autonomy in chemistry—one that balances thoughtful and realistic experimental formulation.

Robertson, Lily A.↗

Extracting source parameters from beam monitors on a chopper spectrometer

The intensity distributions of beam monitors in direct-geometry time-of-flight neutron spectrometers provide important information about the instrument resolution. For short-pulse spallation neutron sources in particular, the asymmetry of the source pulse may be extracted and compared to Monte Carlo source simulations. An explicit formula using a Gaussian-convolved Ikeda-Carpenter distribution is given and compared to data from the ARCS instrument at the Spallation Neutron Source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A method for high-resolution x-ray imaging of intermodal cargo containers for fissionable materials

The sensitivity for identification of high-Z objects in elemental form in the massive cargos of intermodal containers with continuous bremsstrahlung radiation depends critically on discriminating the weak signal from uncollided photons from the very intense flux of scattered radiations that penetrate the cargo. We propose that this might be accomplished by rejection of detected events with E{<=}2-3 MeV that contain the majority of multiply scattered photons along with a correction for single-scattered photons at higher energies. Monte Carlo simulations of radiographs with a 9 MeV bremsstrahlung spectrum demonstrate that rejection of detected events with E{<=}3 MeV removes the majority of signals from scattered photons emerging through cargos with Z{<=}30 and areal densities of at least 145 g cm{sup -2}. With analytical estimates of the single-scattered intensity at higher energies, accurate estimates of linear attenuation coefficients for shielded and unshielded uranium spheres with masses as small as 0.08 kg are found. The estimated maximum dose is generally so low that reasonable order tomography of interesting portions of a container should be possible.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

EVALUATION OF OVEN-CURED, SOLID CARBON/EPOXY COMPOSITES WITH VARIOUS POROSITY LEVELS

Cirrus has developed a strong core competency fabricating composite components using oven cure vacuum bag technology. When using this process, porosity levels must be carefully managed and effects of porosity well understood. Excessive porosity negatively affects material performance and reduces the effectiveness of the ultrasonic NDI method. This paper will present material characterization results from carbon/epoxy composite panels produced with various levels of porosity. Panels were inspected using two different ultrasonic methods. Panels were destructively tested to correlate static mechanical and physical properties to ultrasonic absorption coefficients. The goal of this work is to characterize material behavior to allow ultrasonic inspection in a manufacturing environment on vacuum bag oven-cured parts where porosity may be a factor.

36 MATERIALS SCIENCE↗

Microscopic EoS for High Density Matter

The density and temperature dependence of energy per particle of a system (the Equation of State--EoS) is a fundamental ingredient of all models of nuclear matter and stars. As baryons and leptons form the main components of all stars, knowledge of nuclear physics and weak interactions is essential for correct understanding of the birth, life and death of stars. We compare results obtained with EOS's based on a selection of well established nucleon-nucleon effective interactions with new results from the quark-meson coupling model and the Oxford quark model based effective potential. Properties of cold non-rotating neutron stars, calculated on the basis of the models, are presented and discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Cali Meteorite: Luminescence of a recently fallen H/L ordinary chondrite

The Cali meteorite fall occurred on 6 July 2007 at 21h33m+-1m UTC. Some specimens were recovered just after their fall so they are extremely fresh materials. Mineral analysis and bulk chemistry revealed that the measured abundances for most elements closely match the values recorded for other ordinary chondrites classified as H/L. We present here thermoluminescence studies of this recently fallen meteorite in order to get additional information on the radiation environment, and the thermal history of this meteorite. Such information is revealed to be complementary with the range of orbital elements deduced from eyewitness reports of the fireball.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of the magnetic properties of GeMn thin films through Mn L-edge x-ray absorption

X-ray absorption spectroscopy of epitaxial GeMn thin films reveals an experimentally indistinguishable electronic configuration of Mn atoms incorporated in Ge{sub 1?x}Mn{sub x} nanoclusters and in precipitates of the intermetallic compound Mn{sub 5}Ge{sub 3}, respectively. However, the average magnetic response of thin films containing Ge{sub 1?x}Mn{sub x} nanoclusters is lower than the response of films containing Mn{sub 5}Ge{sub 3} precipitates. This reduced magnetic response of Ge{sub 1?x}Mn{sub x} nanoclusters is explained in terms of a fraction of Mn atoms being magnetically inactive due to antiferromagnetic coupling or the presence of structural disorder. A determination of the role of magnetically inactive Mn atoms in the self-assembly of the thermodynamically metastable Ge{sub 1?x}Mn{sub x} nanoclusters seems to be an essential ingredient for an enhanced control of this promising high Curie temperature magnetic semiconductor.

36 MATERIALS SCIENCE↗

A study of the performance of an ion shutter for drift tubes in atmospheric pressure ion mobility spectrometry: Computer models and experimental findings

Ion mobility spectra are initiated when ions, derived from a sample, are pulsed or injected through ion shutters into a drift region. The effect on signal intensity from electric fields arising from the shutter grids (E{sub s}) and a superimposed electric field of the drift tube (E{sub d}) was determined experimentally and simulated computationally for ion motion at ambient pressure. The combination of these two fields influenced shutter performance in three ways: (1) intensity of an ion peak was suppressed by increased current in the baseline due to continuous leakage of ions into the drift region from insufficient E{sub s} to block ion motion when needed, at a given value of E{sub d}; (2) the ion shutter provided maximum peak intensity with some optimal ratio of E{sub s}/E{sub d} when ions were fully blocked except using the injection time; (c) the signal intensity was reduced when the blocking voltage of the ion shutter exceeded this optimal E{sub s}/E{sub d} ratio from ion depletion at the shutter grids. The optimal ratio from the computer models was equal to 1.50, whereas a value of 2.50 was obtained from the experimental findings. This difference was attributed to nonideal geometry with the grids of the shutter and the conducting elements in the drift tube establishing both E{sub s} and E{sub d}. As both the experimental and modeling results demonstrated, a mobility dependence of ion yield from the ionization source was found to cause a mobility dependent ion signal at the collector electrode.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Anelastic anomalies and negative Poisson's ratio in tetragonal BaTiO{sub 3} ceramics

Anelastic anomalies (sharp variations in modulus and damping with temperature) were observed in tetragonal BaTiO{sub 3} via broadband viscoelastic spectroscopy after aging at 50 deg. C for 15 h. The effect was most pronounced under electrical short circuit condition, at low frequency and under small excitation strain (10{sup -6}). Softening in bulk modulus and negative Poisson's ratio were observed near 60 deg. C. Effects are attributed to an oxygen vacancy mechanism. A relaxational model cannot account for sharp response at smaller strains. Heterogeneity of negative stiffness is considered as a cause.

36 MATERIALS SCIENCE↗

Neutron-Rich Nuclei Beyond {sup 132}Sn: Spherical Shapes and Octupole Correlations

Nuclear properties of nuclei with a few valence nucleons outside the doubly-magic {sup 132}Sn core and located in the octupole correlation region have been investigated via gamma-gamma-gamma coincidence measurements of prompt gamma-ray emitted in the spontaneous fission of {sup 252}Cf with Gammasphere. The high spin level scheme of {sup 134}I has been identified for the first time. Shell model calculations reproduce the level scheme quite well. The level schemes of {sup 137}I and {sup 139}Cs have been reinvestigated and extended. Their nuclear structure is well described by realistic shell model calculations. The g-factors of the 4{sup +} state in {sup 134}Te, 15/2{sup +} state in {sup 135}I, and 15/2{sup -} state in {sup 137}Xe were determined using a newly developed program for angular correlation analysis. The measured g-factors compared favorably with shell model calculations. Octupole correlations are proposed in {sup 141}Cs and {sup 142}Cs. The variations of D{sub 0} in the Cs isotopes exhibit a pronounced drop of dipole moment with increasing neutron number.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗