Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SERVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Damaged Fuel Rod Service with German Turnkey Technology NCS 45 Transport Casks and Under-Water-Brazing Technology - 18182

Transportation of damaged irradiated fuel rods with the package NCS 45 developed and operated by DAHER Nuclear Technologies GmbH (DNT) saves considerable technical and financial resources in the German phase-out scenario. The technology can be used world-wide to speed up decommissioning of NPPs. In each German reactor (and most likely in all reactors in the world) a small number of damaged fuel rods have accumulated over the operation phase. In general, transport and storage solutions for fuel are concentrated on the bulk of material, i. e. complete fuel assemblies containing undamaged fuel rods. It is hence a rather straightforward process to remove almost all the fuel from the reactor pools. However, damaged fuel rods - which have to be removed from the pool prior to dismantling - can cause considerable delay in dismantling and high costs for safe-guarding and specialized solutions, even though they only contain a comparatively very tiny amount of fuel. DNT has all required tools, equipment and experience to mitigate the described problem: - The package NCS 45 licensed for the transport of damaged Uranium Oxide (UOX) and Mixed Oxide (MOX) fuel rods with a burn-up of up to 120 GWd/MgHM; - A patented underwater brazing (encapsulation) technology to render very high burn-up damaged fuel rods fit for transport; - Qualified personnel to plan, license and operate such encapsulation process and the NCS 45 in a NPP and to carry out the transports; - Proven record of successful removal of damaged fuel rods from several shut-down reactors in Germany. The package NCS 45 is currently licensed in several European countries. Due to its state-of-technique design - type B(U)F-96 approval - it could be licensed and used for world-wide applications. The underwater brazing technology was developed and patented by DNT to address the challenge of transporting high burn-up and/or damaged UOX and MOX fuel rods. Above a burn-up of 55 GWd/MgHM there are neither enough data to assess the behavior of the cladding under stress nor sufficient benchmarks available to validate the source terms of the fuel. Hence, high burn-up fuel rods are encapsulated in the fuel pool by using the underwater-brazing-technology before they are loaded into the package NCS 45. Furthermore, the capacity of the NCS 45 to transport damaged fuel rods can be considerably enhanced by encapsulating these rods. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Arizona Public Service - NRIC Overview

This deck contains an update on NRIC activities along with an overview of reactor development in the United States.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A CHIL Validation of Machine Learning-Assisted Methods for Real-Time Controls of Solar PV for Grid Services: Preprint

Recent research has highlighted the potential for solar to act as a zero-marginal-cost and zero-emission flexibility resource on the bulk power system when operated with advanced control systems. To increase the performance of these systems, leading technologies, including machine learning (ML) and hierarchical inverter set point allocation, have been proposed; however, these technologies lack comprehensive validation under real-world application scenarios. This paper addresses this gap by designing and developing a controller-hardware-in-the-loop framework to evaluate the performance of different flexible solar technologies in responding to automatic generation control signals in a closed-loop fashion. Simulation results indicate the superior performance of an ML-based approach compared to the conventional reference-control grouping-based approach, showcasing its potential to support grid stability and operational efficiency.

closed-loop validation↗

Creep and corrosion-resistant cast alumina-forming alloys for high temperature service in industrial and petrochemical applications

An austenitic Ni-base alloy, consisting essentially of, in weight percent: 2.5 to 4.75 Al; 21 to 26 Cr; 20 to 40 Fe; 0.75 to 2.5 total of at least one element elected from the group consisting of Nb and Ta; 0 to 0.25 Ti; 0.09 to 1.5 Si; 0 to 0.5 V; 0 to 2 Mn; 0 to 3 Cu; 0 to 2 of at least one element selected from the group consisting of Mo and W; 0 to 1 of at least one element selected from the group consisting of Zr and Hf; 0 to 0.15 Y; 0.3 to 0.55 C; 0.005 to 0.1 B; 0 to 0.05 P; less than 0.06 N and balance Ni (30 to 46 Ni), wherein the weight percent Ni is greater than the weight percent Fe, and wherein the ratio Ni/(Fe+2*C) is between 1.02 and 1.067.

Muralidharan, Govindarajan↗

Fitness-for-Service Analysis of Reactor Components under Flexible Load-Following Operating Conditions

Conventional power-generation plants, including nuclear plants, have been traditionally designed to provide a steady baseload energy capacity, optimizing output efficiency while minimizing variable costs. However, the growing adoption of large-scale renewable energy-generation systems, which rely on intermittent sources such as solar and wind, has introduced more variability into the energy supply in interconnected electricity grids. As a result, the next generation of power plants needs to operate in what is known as the load-following mode, requiring flexible adjustments in electricity production to align with the energy demand on the grid. This transition from the steady baseload operation to load-following operating conditions can significantly increase the number of times various plant components are exposed to transient stresses. This increased thermo-mechanical cycling can lead to accelerated material degradation, thereby elevating the risk of premature failure of a component. It becomes imperative to conduct a comprehensive analysis of fatigue, creep-fatigue, and stress corrosion cracking life, to assess the resilience of the various engineering components under these flexible load-following operating conditions. This study aims to develop a comprehensive numerical model of a light-water reactor pressure vessel (RPV) to investigate its degradation under various operating scenarios. This coupled thermo-mechanical finite element analysis evaluated the stress response of the RPV caused by considering fluctuations in thermal and mechanical loads caused by the varying pressure and temperature occurring during the load-following operation. Critical locations on the RPV are subsequently identified based on the stress response. The stress intensity factors for the postulated flaws at those locations are then calculated, followed by an evaluation of the reactor's life in accordance with the ASME Boiler and Pressure Vessel Code Section XI. This comprehensive life assessment covers a number of transients expected during the flexible load-following operation, providing invaluable insights into the RPV's structural integrity. Moreover, the development methodology can be adapted to other reactor components, as well as components of conventional power stations that are affected by varying operating conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

EFFECTS OF MINERAL COMPOSITION ON THE STRUCTURAL PERFORMANCE OF IN-SERVICE IRRADIATED CONCRETE BIOLOGICAL SHIELD

In this work, different types of magmatic rocks used in the construction of concrete biological shields in pressurized water reactors were analyzed for their susceptibility to irradiation damage, determined by the irradiation damage depth in the concrete biological shield after 80 years of operation. The results are as follows: ultrafelsic igneous rocks (e.g., granite) are high risk; igneous intrusive rocks (e.g., diorite, gabbro) are moderate risk; and ultramafic igneous rocks (e.g., olivinite, dunite) are low risk. Risk is correlated with silica content for felsic and intermediate rocks, and with pyroxene content for mafic rocks.

Le Pape, Yann [ORNL] (ORCID:0000000154106546)↗

INL Reactor Technology Complex Out-of-Service Buried Piping Hazards

Idaho National Laboratory (INL) Reactor Technology Complex (RTC) buried piping and components are being characterized to determine if they should be managed as hazardous waste and subject to the Hazardous Waste Management Act /Resource Conservation and Recovery Act (RCRA). RTC buried piping and components involve both active piping and components from currently operating nuclear facilities, such as the Advanced Test Reactor (ATR), and inactive lines from facilities undergoing D&D activities. The issue exists as to the proper methods to analyze and control hazards associated with D&D activities on facilities collocated with existing operating nuclear facilities, or future collocated facilities being considered with the resurgent nuclear industry. During initial characterization activities, it was determined that residual radioactive material in several inactive RTC lines and components could potentially exceed hazard category (HC) 3 thresholds. In addition, concerns were raised as to how to properly isolate active nuclear facility piping and components from those inactive lines undergoing RCRA actions, and whether the operating facility safety basis could be impacted. Work was stopped, and a potential inadequacy in the safety analysis (PISA) was declared, even though no clear safety basis existed for the inactive, abandoned lines and equipment. An unreviewed safety question (USQ) and an occurrence report resulted. A HC 3 or greater Nuclear Facility/Activity for the buried piping and components was also declared in the occurrence report. A qualitative hazard assessment was developed to evaluate the potential hazards associated with characterization activities, and any potential effects on the safety basis of the collocated RTC operating nuclear facilities. The hazard assessment clearly demonstrated the low hazards associated with the activities based on form and dispersiblity of the radioactive material in the piping and components. The hazard assessment developed unique controls to isolate active RTC piping and components from inactive components, and demonstrated that existing safety management programs were adequate for protection of the worker.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Cooperative Extension Service & Wind Powering America Collaborate to Provide Wind Energy Information to Rural Stakeholders (Poster)

Cooperative Extension's presence blankets much of the United States and has been a trusted information source to rural Americans. By working together, Cooperative Extension, Wind Powering America, and the wind industry can better educate the public and rural stakeholders about wind energy and maximize the benefits of wind energy to local communities. This poster provides an overview of Cooperative Extension, wind energy issues addressed by the organization, and related activities.

17 WIND ENERGY↗