Radiography. Volume 2 - Radiation safety
Radiation measurement techniques and devices, occupational and other dosages, personnel protection, and other aspects of radiation safety - programmed text on nondestructive tests
Source record↗
SEARCH · Engineering Papers
Results for “Radiation Testing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Solar cell radiation damage experiment Quarterly report, 28 Dec. 1970 - 27 Mar. 1971
ATS-F solar cell radiation damage experiment design and ground tests including space environment simulation and low-energy proton and electron irradiation
Source record↗
Environmental simulation testing of solar cell contamination by hydrazine
Test results for thermal vacuum and radiation environment simulation of hydrazine contamination are discussed. Solar cell performance degradation, measured by short circuit current, is presented in correlation with the variations used in environmental parameters.
Moore, W. W., Jr.↗
Earth resources data systems design: S192 instrument measurements and characteristics
The design, development, and characteristics of the S192 instrument for use with the earth resources data systems are discussed. Subjects presented are: (1) multispectral scanner measurements, (2) measurement characteristics, (3) calibration and aligment, (4) operating modes, and (5) time tagging and references. The S192 will obtain high spatial resolution, quantitative line scan imagery data of the radiation reflected and emitted by selected test sites in up to 13 spectral bands of visible, near infrared, and thermal infrared regions of the electromagnetic spectrum.
Goldstein, A. S.↗
Energy straggling and radiation reaction for magnetic bremsstrahlung.
Using the method of quantum electrodynamics, the energy distribution of particles and emitted photons is calculated for the case when increases in the average energy of the photon emitted by synchrotron radiation to values appreciable compared to the energy of the particle give rise to particle energy straggling and radiation spectrum broadening. The classical radiative reaction effects which may be tested in this type of experiment are outlined, and a detailed quantum mechanical calculation is presented. The significance of energy straggling in astrophysics is discussed briefly.
Shen, C. S.↗
Method of simultaneous measurement of radiative and lattice thermal conductivity.
A new technique of high-temperature thermal-conductivity measurement is described. A CO2 gas laser is used to generate a low-frequency temperature wave at one face of a small disk-shaped sample, and an infrared detector views the opposite face to detect the phase of the emerging radiation. A mathematical expression is derived which enables phase data at several frequencies to be used for the simultaneous determination of thermal diffusivity and mean extinction coefficient. Lattice and radiative thermal conductivities are then calculated. Test results for sintered aluminum oxide at temperatures from 530 to 1924 K are within the range of error of previously existing data.
Schatz, J. F.↗
Burning characteristics and fiber retention of graphite/resin matrix composites
Graphite fiber reinforced resin matrix composites were subjected to controlled burning conditions to determine their burning characteristics and fiber retention properties. Two types of burning equipment were used. Small samples were burned with a natural gas fired torch to study the effects of fiber orientation and structural flaws such as holes and slits that were machined into the laminates. Larger laminate samples were burned in a Heat Release Rate Calorimeter. Unidirectional epoxy/graphite and polyimide/graphite composites and boron powder filled samples of each of the two composite systems were burn tested and exposed to a thermal radiation. The effects of fiber orientation, flaws, and boron filler additives to the resins were evaluated. A high char forming polyimide resin was no more effective in retaining graphite fibers than a low char forming epoxy resin when burning in air.
Bowles, K. J.↗
Rod-Wall Sound Shield for Wind Tunnels
Test model is shielded from turbulence radiated from wind tunnel walls. Shield overcomes problems caused by leading-edge configuration and leading edge angle of inclination of previous designs. Has successfully maintained a laminar rather than turbulent boundary layer.
Creel, T. R. J.↗
Soft X-ray and XUV imaging with a charge-coupled device /CCD/-based detector
A soft X-ray/XUV imaging camera which uses a thinned, back-illuminated, all-buried channel RCA CCD for radiation sensing has been built and tested. The camera is a slow-scan device which makes possible frame integration if necessary. The detection characteristics of the device have been tested over the 15-1500 eV range. The response was linear with exposure up to 0.2-0.4 erg/sq cm; saturation occurred at greater exposures. Attention is given to attempts to resolve single photons with energies of 1.5 keV.
Loter, N. G.↗
Development of computer models for the prediction of large distorted antenna characteristics
A program for calculating the radiation patterns of analytic reflector antennas, using geometric optics and aperture plane integration techniques, was modified and extended to include nonanalytic surfaces. The original program, while capable of predicting patterns for a variety of reflectors, both smooth and multipanelled, was subject to the restriction that the surface had to be expressed analytically, i.e., described by a set of mathematical equations. This restriction was removed by adapting a technique which allows the reflector configuration to be interpolated from a finite set of points measured on the surface. Criteria for choosing both the number and distribution of these measured surface points were developed by comparing the predicted antenna radiation patterns with measured laboratory results. Test cases involved relatively smooth as well as grossly distorted arbitrary surfaces. Finally, surface point accuracies were established by applying random error analysis to the measurement process.
Moskowitz, S. M.↗
Aerothermal modeling program, phase 1
The physical modeling embodied in the computational fluid dynamics codes is discussed. The objectives were to identify shortcomings in the models and to provide a program plan to improve the quantitative accuracy. The physical models studied were for: turbulent mass and momentum transport, heat release, liquid fuel spray, and gaseous radiation. The approach adopted was to test the models against appropriate benchmark-quality test cases from experiments in the literature for the constituent flows that together make up the combustor real flow.
Sturgess, G. J.↗
Stagnation-point ablation of carbonaceous flat disks. II Experiment
Six flat-disk models made of carbon-carbon and carbon-phenolic materials were launched in an argon-filled track-range facility to test ablation characteristics in a radiation-dominated, massive-blowing environment. The shock standoff distances deduced from the shadowgraphs agree with theoretical predictions during the earlier portion of the flight, while the wall temperatures determined by the image-converter photographs agree with predictions during the later portion. The measured surface recessions exceed the calculated values by about 60 percent for carbon-phenolic and 30 percent for carbon-carbon. The discrepancies are attributed to spallation. The measured char thicknesses agree with theoretical predictions.
Park, C.↗
Downward longwave radiation at the surface from satellite measurements
A new technique is presented for generating downward longwave flux at the earth's surface from satellite meteorological data and a radiative transfer model. The technique was tested by using TIROS-N data from 41 passes over a ground site covering a period of one month. Satellite-derived fluxes were compared with those measured by a ground-based pyrgeometer during each overpass. The standard error of the satellite-derived fluxes relative to the mean ground-measured values was found to be 6.5 percent.
Darnell, W. L.↗
Sensitivity of N2O, CFCl3, and CF2Cl2 two-dimensional distributions to O2 absorption cross sections
A good test of the transport and ultraviolet radiation treatment for any model can be based on the consideration of the three gases N2O, CFCl3 (F-11), and CF2Cl2 (F-12). Attention is given to a two-dimensional model which makes it possible to study changes in seasonal and latitudinal distributions which result from O2 cross-section changes. A latitude-dependent ozone decrease has already been predicted by two-dimensional models for chlorofluoromethane (CFM) release. For this reason, it is of interest to determine if a strong latitude-dependent change is detectable in the CFM profiles. One-dimensional models have pointed toward a trend of decreased trace gas concentrations in correlation with decreased O2 cross sections. The O2 cross sections between 180 and 230 nm are changed within a range of experimentlly allowed values. It is found that lower O2 absorption cross sections lead to larger photodissociation rates for the trace gases F-11, F-12, and N2O.
Jackman, C. H.↗
Space radiation studies
Two Active Radiation Dosimeters (ARD's) flown on Spacelab 1, performed without fault and were returned to Space Science Laboratory, MSFC for recalibration. During the flight, performance was monitored at the Huntsville Operations Center (HOSC). Despite some problems with the Shuttle data system handling the verification flight instrumentation (VFI), it was established that the ARD's were operating normally. Postflight calibrations of both units determined that sensitivities were essentially unchanged from preflight values. Flight tapes were received for approx. 60 percent of the flight and it appears that this is the total available. The data was analyzed in collaboration with Space Science Laboratory, MSFC. Also, the Nuclear Radiation Monitor (NRM) was assembled and tested at MSFC. Support was rendered in the areas of materials control and parts were supplied for the supplementary heaters, dome gas-venting device and photomultiplier tube housing. Performance characteristics of some flight-space photomultipliers were measured. The NRM was flown on a balloon-borne test flight and subsequently performed without fault on Spacelab-2. This data was analyzed and published.
Source record↗
A one-dimensional interactive soil-atmosphere model for testing formulations of surface hydrology
A model representing a soil-atmosphere column in a GCM is developed for off-line testing of GCM soil hydrology parameterizations. Repeating three representative GCM sensitivity experiments with this one-dimensional model demonstrates that, to first order, the model reproduces a GCM's sensitivity to imposed changes in parameterization and therefore captures the essential physics of the GCM. The experiments also show that by allowing feedback between the soil and atmosphere, the model improves on off-line tests that rely on prescribed precipitation, radiation, and other surface forcing.
Koster, Randal D.↗
Vacuum ultraviolet radiation and thermal cycling effects on atomic oxygen protective photovoltaic array blanket materials
The importance of synergistic environmental exposure is demonstrated through the evaluation of DuPont 93-1 in simulated LEO environment. Changes in optical properties, surface condition, and mass loss data are described. The qualitative results indicate the necessity for exposure of materials to a series of simulated LEO environments in order to properly determine synergistic effects and demonstrate the overall LEO durability of candidate materials. It is shown that synergistic effects may occur with vacuum thermal cycling combined with VUV radiation followed by atomic oxygen exposure. Testing the durability of candidate solar array blanket materials in a test sequence with necessary synergistic effects makes it possible to determine the appropriate material for providing structural support and maintaining the proper operating temperature for solar cells in the SSF Photovaltaic Power System.
Brady, J.↗
A technique for measuring vertically and horizontally polarized microwave brightness temperatures using electronic polarization-basis rotation
This technique for electronically rotating the polarization basis of an orthogonal-linear polarization radiometer is based on the measurement of the first three feedhorn Stokes parameters, along with the subsequent transformation of this measured Stokes vector into a rotated coordinate frame. The technique requires an accurate measurement of the cross-correlation between the two orthogonal feedhorn modes, for which an innovative polarized calibration load was developed. The experimental portion of this investigation consisted of a proof of concept demonstration of the technique of electronic polarization basis rotation (EPBR) using a ground based 90-GHz dual orthogonal-linear polarization radiometer. Practical calibration algorithms for ground-, aircraft-, and space-based instruments were identified and tested. The theoretical effort consisted of radiative transfer modeling using the planar-stratified numerical model described in Gasiewski and Staelin (1990).
Gasiewski, Albin J.↗