Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

n-Type doping of a solution processed p-type semiconductor using isoelectronic surface dopants for homojunction fabrication

The p-n junction is one of the fundamental requirements for a practical semiconductor-based electronic device. Designing a heterojunction comprising of dissimilar p-type and n-type semiconductors calls for careful energy level considerations, both when selecting the semiconductor materials as well as the metal contacts. A homojunction based on a single semiconductor simplifies this task, as energy levels of the p-type and n-type materials are already fairly similar, allowing for easier selection of contacts. Traditionally, homojunctions rely on doping of a bulk semiconductor to achieve p- and n-type transport through controlled addition of aliovalent dopants via energy-intensive processes such as ion implantation or thermal annealing. Exact control of doping in nanocrystalline semiconductors is significantly more challenging, due to self-purification effects. However, owing to their large surface areas, surface moieties can be utilized to both dope the nanostructures as well as tune their energy levels. Here, we present a facile technique based on an isoelectronic surface dopant in order to achieve p- and n-type materials based on the same semiconductor. We show that thin p-type colloidal Bi 2 Te 3 nanowires can be switched to n-type through surface functionalization, thus increasing the availability of new nanocrystalline solution-processable p-n homojunctions.

42 ENGINEERING↗
DOE OSTI2021

Localized Defect Detection from Spatially Mapped, In-Situ Process Data With Machine Learning

In powder bed fusion additive manufacturing, machines are often equipped with in-situ sensors to monitor the build environment as well as machine actuators and subsystems. The data from these sensors offer rich information about the consistency of the fabrication process within a build and across builds. This information may be used for process monitoring and defect detection; however, little has been done to leverage this data from the machines for more than just coarse-grained process monitoring. In this work we demonstrate how these inherently temporal data may be mapped spatially by leveraging scan path information. We then train a XGBoost machine learning model to predict localized defects—specifically soot–using only the mapped process data of builds from a laser powder bed fusion process as input features. The XGBoost model offers a feature importance metric that will help to elucidate possible relationships between the process data and observed defects. Finally, we analyze the model performance spatially and rationalize areas of greater and lesser performance.

3D printing↗
DOE OSTI2020

Developing a Decision Support Engine to Enable Irrigation Modernization - Poster

Irrigation systems in the United States are some of the oldest continually utilized infrastructure in existence today, with some systems exceeding 100 years in age. They are operated to meet farming demands but are managed through a balance of varying influence: policies limiting water usage, stakeholder interests, and environmental impacts. Irrigation modernization is defined as a set of activities that update and improve existing irrigation systems, including, but not limited to improving water quantity, development of distributed energy resources for surrounding communities, ecosystem services, and improved agricultural yields. Modernizing an existing irrigation system can enable stakeholders to combat changing environmental and population demands but is difficult because the complexity involved in determining the potential benefits and consequences of irrigation modernization is high. We are combining a large amount of various geospatial, tabular, and temporal data with subject matter expertise into a decision support engine that will enable stakeholders to determine the benefits and consequences of irrigation modernization in their irrigation systems. A web-based GIS will allow the user to construct the modifications out of a palette of modernization options, which will be sent to the analytics engine for computations, and back to the web client for a graphical display and comparison of relevant metrics. Our development process involves four phases: 1) identify mechanisms of modernization, 2) identify data requirements, data streams, first principles and applicable algorithms necessary to quantify modernization mechanisms, 3) create ‘modules’ for each modernization mechanism, these modules will form the decision support engine, each capable of performing independently but can also inform other modules when needed, 4) Merge the decision support engine with a user interface, capable of ingesting user inputs and returning insights into the impacts of a modernization project as they relate to economic, environmental, monetary, and energy generation. Once complete, it is our intention that this tool will be fundamental in irrigation modernization projects, providing a strong analytical basis from which stakeholders can quickly make informed decisions regarding project development.

13 HYDRO ENERGY↗
DOE OSTI2021

Practical Start-Up Process of Multiple Grid-Tied Voltage-Sourced Inverters in Laboratory

Starting up inverter-based resources (IBRs) and integrating them into a grid are important in real-world engineering and there are many challenges to be tackled. Using a laboratory-scale hardware test bed (50 Watt and 20 V), this paper demonstrates the challenges and provides a practical start-up process that can smoothly energize two grid-tied voltage-sourced inverters (VSI) and synchronize the VSIs into a 60-Hz grid. The hardware test bed consists of two SiC VSIs and a 45-kW Chroma grid simulator to act as the grid. The inverter controls are implemented in OPAL-RT OP5600, which has the measurements sensed, control algorithms processed, and gate signals generated and sent to the VSI switches. This research focuses on examining how to energize VSIs and how to synchronize the VSIs into the grid. The best energizing approach is summarized based on comparison and analysis of the experiment results. The presented approach can prevent large transients during the start-up process.

Wang, Zhengyu↗
DOE OSTI2023

Understanding the Mechanism of Light and Elevated Temperature Induced Degradation of p-type Silicon Solar Cells (Final Report)

Light- and elevated-temperature-induced degradation (LeTID) was first discovered in multicrystalline Si (mc-Si) solar cells and was initially attributed to metal impurities. Later, LeTID was reported in Czochralski (Cz) and float-zone (FZ) Si, and is considered as an important efficiency loss mechanism in p-type passivated emitter rear contact (p-PERC) Cz Si solar cells. LeTID causes ~10% relative and permeant efficiency losses in these cells in warmer climate regions where the module temperature is > 50 °C. Unlike light-induced degradation (LID), which is also observed in p-PERC cells, LeTID is slower and takes weeks to months in the field to saturate. Another difference compared to LID is that regeneration in LeTID proceeds very slowly, and field regeneration could take > 25 years — essentially the life of the module. Unlike B-O defects that are responsible for LID, neither B nor O impurities are directly involved in LeTID. LeTID appears to be unique to p-type Si, and is also observed in Ga-doped Si. Currently, most experimental evidence relates LeTID to the injection of hydrogen present in the dielectric surface passivation layers, such as SiN x and Al 2 O 3 , into the monocrystalline Si (c-Si) bulk during the fast-firing step. The involvement of hydrogen is further strengthened by controlled studies that show that increasing the amount of hydrogen in the dielectric during fast-firing increases the degree of LeTID. Similar to LID, a regeneration process has been discovered for LeTID. Regeneration of LeTID defects occurs when samples are exposed to 2–4 Suns illumination at elevated temperatures of 140–220 °C for 2–15 hr. Given the slower kinetics of LeTID and sample regeneration compared to LID, this poses a challenge for the manufacturing and field reliability of p-PERC cells, which will be the leading photovoltaic technologies over the next decade. Therefore, there is a need to understand LeTID and develop strategies to mitigate this effect. The defect responsible for LeTID has been extensively studied with over 100 publications, but direct spectroscopic evidence of this defect’s structure is lacking. Without an atomistic understanding of the LeTID defect, it is difficult to assess the long-term efficacy of the current industrial mitigation strategies. This, in turn, has implications on energy production for tens of gigawatts of these cells that will be deployed yearly worldwide. Using electron paramagnetic resonance, we identified a defect associated with LeTID with a g-value of 2.006, which we attribute to an Si dangling bond in an extended defect such as a vacancy agglomerate with H possibly within or in close vicinity. These vacancy agglomerates are likely created during the firing process, during which time H atoms are also injected into the bulk from the hydrogenated SiN x dielectric layer. Our atomistic-level insight shows that the LeTID defect can be mitigated by targeted intrinsic defect engineering of the c-Si material through a slower pull rate of the Cz ingot or 1000 °C oxygen ambient processing of the Si wafer to reduce the vacancy concentration. This project was a collaborative effort between the Colorado School of Mines and the National Renewable Energy Laboratory.

14 SOLAR ENERGY↗
DOE OSTI2023

Engineering bimetallic interfaces and revealing the mechanism for carbon dioxide electroreduction to C 3+ liquid chemicals

Reduction reaction of CO 2 (CO 2 RR) to liquid C 3+ chemicals is a net-zero-carbon process and can increase local resiliency to power outages and fuel consumption. The mechanism and the catalyst design rules of CO 2 RR-to-C 3+ are unknown. Engineering bimetallic interface (e.g., Pd/Au) to tune the intermediate adsorption is promising for promoting C 3+ formation. Our density functional theory (DFT) calculations find that *CH 2 could be the key intermediate and C 1 -CH 2 coupling could be the rate-limiting step to generate C 3+ . High CO surface coverages can promote the bimetallic interfacial sites, lower the energetics of the C 1 -CH 2 coupling step, and enhance the C 3+ formation. We further construct a volcano plot of C 1 -CH 2 kinetics as a function of the binding strength of key intermediate *CH 2 via engineering the d-band center of the interfacial site. Our findings could guide the rational design of bimetallic interfaces and their near-surface microenvironment for enhancing CO 2 RR-to-C 3+ .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Dialing in Direct Air Capture of CO 2 by Crystal Engineering of Bis-iminoguanidines

Direct air capture (DAC) technologies that extract carbon dioxide from the atmosphere via chemical processes have the potential to restore the atmospheric CO 2 concentration to an optimal level. This study elucidates structure-property relationships in DAC by crystallization of bis-iminoguanidine (BIG) carbonate salts. Here, their crystal structures are analyzed by X-ray and neutron diffraction to accurately measure key structural parameters including molecular conformations, hydrogen bonding, and π-stacking. Experimental measurements of key properties, such as aqueous solubilities and regeneration energies and temperatures, are complemented by first-principles calculations of lattice and hydration free energies, as well as free energies of reactions with CO 2 , and BIG regenerations. Minor structural modifications in the molecular structure of the BIGs are found to result in major changes in the crystal structures and the aqueous solubilities within the series, leading to enhanced DAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Deploying synthetic coevolution and machine learning to engineer protein-protein interactions

Fine-tuning of protein-protein interactions occurs naturally through coevolution, but this process is difficult to recapitulate in the laboratory. We describe a platform for synthetic protein-protein coevolution that can isolate matched pairs of interacting muteins from complex libraries. This large dataset of coevolved complexes drove a systems-level analysis of molecular recognition between Z domain–affibody pairs spanning a wide range of structures, affinities, cross-reactivities, and orthogonalities, and captured a broad spectrum of coevolutionary networks. Furthermore, we harnessed pretrained protein language models to expand, in silico, the amino acid diversity of our coevolution screen, predicting remodeled interfaces beyond the reach of the experimental library. Further, the integration of these approaches provides a means of simulating protein coevolution and generating protein complexes with diverse molecular recognition properties for biotechnology and synthetic biology.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Validation of Manufacturing Process Designs for Stamped Microchannel Recuperators

Microchannel recuperators can achieve high-efficiency power cycles and chemical reactions by recovering waste heat from hot turbine exhaust and chemical reaction streams. However, the industrial application of microchannel recuperators are restricted by the high cost of patterning and bonding. The objective of this study was thus to investigate new methods for producing microchannel recuperators for emerging markets. Based on greenfield cost estimates, process designs based on stamping, laser welding and vacuum brazing of 316L stainless steel laminae were found to be more economical than conventional photochemical machining and diffusion bonding. Subsequently, validation experiments were conducted to produce stamped microchannel components using cost model parameters. At a mass flow rate of 0.99 g/s, the test article made with laser welding was found to provide higher effectiveness than the test article produced using vacuum brazing. Preliminary investigations showed that residual stresses during laser welding of the laminae led to significant warpage, collapsing channels and making lamina-to-lamina fit up challenging. In contrast, the test article produced by vacuum brazing of stamped laminae showed no clogging and 4.6% and 10.5% channel height standard deviation for the cold and hot channels, respectively. Channel variation in the vacuum brazing sample was determined to be caused by misregistration of laminae during brazing. In future work, efforts are needed to choose cheaper, more ductile brazing foils as well as design a brazing fixture to improve lamina-to-lamina registration.

42 ENGINEERING↗
DOE OSTI2025

A review of laser materials processing paradigms

Laser-based processing of materials has progressed from traditional applications such as macroscale cutting and welding, to sophisticated techniques, including ultrafast micromachining, additive manufacturing, and surface engineering at micro- and nano-metric scales. Innovations in laser source technology, particularly the advent of high-power and ultrashort-pulse lasers, have expanded the range of processable materials, enabled a plethora of manufacturing applications, and propelled groundbreaking research in optics, photonics, electronics, and biomedical domains. In this article, we provide a concise, yet broad review of the congruent evolution of lasers and materials processing, and highlight seminal developments in the field over the years, combined with a critical assessment of the state of the art. Finally, we also provide an outlook on emerging needs, as well as a roadmap of anticipated developments in laser technologies and materials platforms over the next 50 years.

Lasers↗
DOE OSTI2025

Engineering long-lived entanglement through dissipation in quantum hybrid solid-state platforms

Spin squeezing, a form of many-body entanglement, is a crucial resource in quantum metrology and information processing. While experimentally viable protocols for generating stable spin squeezing have been proposed in quantum optics setups, there is growing interest in quantum hybrid solid-state systems as alternative platforms for both engineering and exploring many-body quantum phenomena. In this work, we propose a scheme to generate long-lived spin squeezing in an ensemble of solid-state qubits interacting with electromagnetic noise emitted by a squeezed solid-state bath. We identify the conditions under which quantum correlations within the bath can be transferred to the qubit array, driving it into an entangled state independently of its initial configuration. To assess the experimental feasibility of our approach, we analyze the dynamics of an array of solid-state spin defects coupled to a common ferromagnetic bath, which is driven into a non-equilibrium squeezed state through its interaction with a surface acoustic wave mode. Our results demonstrate that the ensemble can exhibit steady-state spin squeezing under suitable conditions, opening new pathways for the generation of robust many-body entanglement in solid-state spin ensembles.

NV centers↗
DOE OSTI2023

O’Hare Airport Short-Term Ground Transportation Modal Demand Forecast Using Gaussian Processes

Here, the principal objective of this study is to analyze the spatial and temporal variation of ground transportation airport demand and provide demand forecast to inform planning capability and explore alternatives for investments to accommodate airport growth. Because of its good adaptability and strong generalization ability for dealing with high-dimensional input, small-sample, and nonlinear spatial data, Gaussian process (GP) regression is used to provide forecast estimates using data from transportation network company (TNC) trips and urban rail passengers at Chicago's O'Hare International Airport. TNC airport trips differ significantly, with three times more distance, more than twice the travel time, and half of the share requests compared with nonairport trips. This highlights the need for separate demand models. Hourly analysis of the rail service indicates that this is likely heavily used by airport workers, whereas TNC services focus on travelers because of variations in the peak demand hours. Heteroscedastic GP regression is implemented because of differences in trip variance between night and day hours. Estimates are given for weekdays and weekend trips, and the 95% confidence intervals are calculated. The introduction of flight schedule information into the models shows marginal improvements in their performance. However, fitting a GP regression becomes computationally expensive with increased sample size and the introduction of spatial components. Transportation planners and policymakers can use the results and methods implemented in this study to optimize transportation assets and provide long-range simulations of the current and future conditions in the area.

42 ENGINEERING↗
DOE OSTI2023

On the 3D printing of polypropylene and post-processing optimization of thermomechanical properties

Polypropylene (PP) is a highly desirable polyolefin in various plastic industries due to its outstanding thermomechanical properties and chemical resistance. Therefore, the 3D printing of PP is an interesting avenue to explore in digitized manufacturing, where more freedom in structural designs is available for new and extended applications, such as high-performance engineering parts. Here, in this work, we 3D printed PP and studied the effect of printing parameters and post-processing conditions on the printed polymer’s thermomechanical behavior. Results showed that nozzle and bed temperatures of 220 and 100°C produced a high printing quality. Infill percentages between 80 and 90%, coupled with a 4-h annealing at 110ºC, also resulted in optimal printed properties. It is thought that PP can be potentially blended with polyethylene or other vinyl polymers for a more extended 3D printing utility and practical applications in rapid tooling and prototyping.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Pele Simulation Suite for Reacting Flows at Exascale

In this work, we present the Pele suite of software tools for compressible and incompressible reacting flows. The Pele suite leverages several different libraries, notably AMReX and SUNDIALS, to achieve performance portability on heterogeneous computing architectures across the supercomputing landscape. The Pele suite is comprised of PeleC, a compressible reacting flow block-structured adaptive mesh refinement solver, PeleLMeX, a low-Mach number reacting flow block-structured adaptive mesh refinement solver, Pele-Physics, a library for transport, thermodynamics, finite rate chemistry, soot, spray and radiation physics. The objective of this paper is (i) to present the code development efforts necessary to achieve highly effective and scalable applications for exascale machines and (ii) to detail the performance results of the Combustion-Pele project applications on Oak Ridge National Laboratory's Frontier. We show good weak and strong scaling results for both PeleC and PeleLMeX up to more than 50 billion cells on more than 4096 Frontier graphics processing unit nodes. We also present a capability demonstration simulation of a dual-fuel pulse compression ignition engine (six adaptive mesh refinement levels, and 60 billion cells or 2.1 trillion degrees of freedom) on Frontier, to date one of the largest simulations performed on the first exascale-class supercomputer.

adaptive mesh refinement↗
DOE OSTI2020

Metamodeling Time-Temperature Creep Parameters

Abstract There exist many time-temperature parameter (TTP) models for creep rupture prediction of components including the Larson–Miller (LM), Manson–Haferd (MH), Manson–Brown (MB), Orr–Sherby–Dorn (OSD), Manson–Succop (MS), Graham–Walles (GW), Chitty–Duval (CD), Goldhoff–Sherby (GS) models. It remains a challenge to determine which model is “best”, capable of accurate interpolation and physically realistic extrapolation of creep rupture data for a given material. In this study, metamodeling is applied to create a unified TTP metamodel that combines and regresses into twelve TTP models (eight existing and four newly derived). An analysis of the mathematical problems that exist in TTP models is provided. A matlab code is written that can: (1) calibrate the material constants of any of the twelve TTP models (using the metamodel); (2) determine the most suitable stress-parameter function; (3) and report the normalized mean square error (NMSE) of rupture predictions for a given material database. Using the metamodel, and code, a design engineer can make an intelligent selection of the “best” TTP model for creep resistant design. This process is demonstrated using four isotherms of alloy P91 creep rupture data. To assess the influence of material, further validation is performed on alloys Hastelloy X, 304SS, and 316SS. It is determined that the “best” model is dependent on material type and the quality and quantity of available data.

Engineering↗
DOE OSTI2021

Performance Comparison of LPG and Gasoline in an Engine Configured for EGR-Loop Catalytic Reforming

In prior work, the EGR loop catalytic reforming strategy developed by ORNL has been shown to provide a relative brake engine efficiency increase of more than 6% by minimizing the thermodynamic expense of the reforming processes, and in some cases achieving thermochemical recuperation (TCR), a form of waste heat recovery where waste heat is converted to usable chemical energy. In doing so, the EGR dilution limit was extended beyond 35% under stoichiometric conditions. In this investigation, a Microlith®-based metal-supported reforming catalyst (developed by Precision Combustion, Inc. (PCI)) was used to reform the parent fuel in a thermodynamically efficient manner into products rich in H2 and CO. We were able to expand the speed and load ranges relative to previous investigations: from 1,500 to 2,500 rpm, and from 2 to 14 bar break mean effective pressure (BMEP). Experiments were conducted to determine the effects of the H/C ratio of the fuel on H2 production and on the engine efficiency in order to compare E10 gasoline (H/C = 1.95) and liquified petroleum gas (LPG), comprised primarily of propane (H/C = 2.67). Additionally, the compression ratio of the engine was increased to ascertain whether further efficiency improvements could be realized based on a reduced knock propensity of the dilute EGR mixture with the reformed fuel. Both the gasoline and propane reforming strategies provided efficiency gains up to 1.85 percentage points and further efficiency improvements with the increased compression ratio were realized. The fuel specific effects of gasoline vs. LPG, the effect of engine operating condition on reforming, and knock limits of the reformed mixture are discussed in detail.

33 ADVANCED PROPULSION SYSTEMS↗