Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Probabilities Mathematics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Expanded Validation of Uranium Systems with the KENO Monte Carlo Codes and SCALE 6.2.4 [Slides]

There is likely a trend in bias for uranium-fueled systems as a function of spectrum, but probably not as a function of enrichment. Some enrichment trends appear, but are potentially the result of outlier experimental results; further investigation is needed where possible. There are good examples in this data of markedly different biases from different systems. Future work includes review and vetting for inclusion in the VALID library and analysis with TSUNAMI.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Insight into SEI Growth in Li-Ion Batteries using Molecular Dynamics and Accelerated Chemical Reactions

The performance of lithium-ion batteries (LIB) using organic electrolytes strongly depends on the formation of a stable solid electrolyte interphase (SEI) film. Elucidating the dynamic evolution and spatial composition of the SEI can be very useful to study the stability of SEI components and help optimize the formation cycles of LIB. We propose a classical molecular dynamics simulation protocol for predicting the first stages of SEI formation using a reaction method involving the decomposition of EC and LiPF 6 molecules in the electrolyte. We accelerate the formation of SEI components near the anode surface by increasing the probability of reactions, implemented through a geometry matching scheme, followed by a force-field reconfiguration. We observe the formation of gases (C 2 H 4 ), inorganic (Li 2 CO 3 and LiF) and organic (LEDC) components. Finally, this protocol shows promise to be able to evaluate the effects of varying electrolyte compositions and additives on SEI layer structure and composition.

25 ENERGY STORAGE↗

Fission and Quasifission in the 'Warm' Fusion Reactions

Mass-energy distributions, as well as capture cross-section of fission-like fragments for the reactions of {sup 48}Ca, {sup 58}Fe and {sup 64}Ni ions with actinides leading to the formation of superheavy compound system with Z = 112-120 at energies near the Coulomb barrier have been measured. Fusion-fission cross sections were estimated from the analysis of mass and total kinetic energy distributions. It was found that the fusion probability is approximately the same for the reactions with {sup 48}Ca ions and drops three orders of magnitude at the transition to {sup 64}Ni ions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reducing the Spatial Discretization Error of Thermal Emission in Implicit Monte Carlo Simulations

Implicit Monte Carlo simulations of thermal radiative transport can exhibit what is known as teleportation error in problems with strong coupling between radiation and matter. Teleportation error occurs when energy deposited in a localized region of a spatial zone is emitted throughout the zone in the next time step. Teleportation error is commonly reduced by biasing the positions of photon thermal emission using a fit to the spatial distribution of temperature to the fourth power. The current work samples and stores locations along photon paths based on absorption probabilities. These locations are used as sites for emission in the subsequent time step. This method of teleportation correction is demonstrated in several sample problems, and is validated against an Implicit Monte Carlo Diffusion Method, which does not exhibit teleportation error. We report the new method reduces teleportation error relative to the source tilting method, and enables the use of lower spatial resolutions than would be required to mitigate teleportation error using the source tilting method.

97 MATHEMATICS AND COMPUTING↗

Preparing angular momentum eigenstates using engineered quantum walks

Coupled angular-momentum eigenstates are widely used in atomic and nuclear physics calculations and are building blocks for spin networks and the Schur transform. To combine two angular momenta J 1 and J 2 , forming eigenstates of their total angular momentum J=J 1 +J 2 , we develop a quantum-walk scheme that does not require inputting O(j 3 ) nonzero Clebsch–Gordan (CG) coefficients classically. In fact, our scheme may be regarded as a unitary method for computing CG coefficients on quantum computers with a typical complexity of O⁡(j) and a worst-case complexity of O⁡(j 3 ). Equivalently, our scheme provides decompositions of the dense CG unitary into sparser unitary operations. Our scheme prepares angular-momentum eigenstates using a sequence of Hamiltonians to move an initial state deterministically to desired final states, which are usually highly entangled states in the computational basis. In contrast with usual quantum walks, whose Hamiltonians are prescribed, we engineer the Hamiltonians in su⁡(2)×su⁡(2), which are inspired by, but different from, Hamiltonians that govern magnetic resonances and dipole interactions. To achieve a deterministic preparation of both ket and bra states, we use projection and destructive interference to double pinch the quantum walks, such that each step is a unit-probability population transfer within a two-level system. We test our state preparation scheme on classical computers, reproducing tables of CG coefficients. Finally, we also implement small test problems on current quantum hardware.

97 MATHEMATICS AND COMPUTING↗

Modeling the Ductile Brittle Fracture Transition in Reactor Pressure Vessel Steels using a Cohesive Zone Model based approach

Fracture properties of Reactor Pressure Vessel (RPV) steels show large variations with changes in temperature and irradiation levels. Brittle behavior is observed at lower temperatures and/or higher irradiation levels whereas ductile mode of failure is predominant at higher temperatures and/or lower irradiation levels. In addition to such temperature and radiation dependent fracture behavior, significant scatter in fracture toughness has also been observed. As a consequence of such variability in fracture behavior, accurate estimates of fracture properties of RPV steels are of utmost importance for safe and reliable operation of reactor pressure vessels. A cohesive zone based approach is being pursued in the present study where an attempt is made to obtain a unified law capturing both stable crack growth (ductile fracture) and unstable failure (cleavage fracture). The parameters of the constitutive model are dependent on both temperature and failure probability. The effect of irradiation has not been considered in the present study. The use of such a cohesive zone based approach would allow the modeling of explicit crack growth at both stable and unstable regimes of fracture. Also it would provide the possibility to incorporate more physical lower length scale models to predict DBT. Such a multi-scale approach would significantly improve the predictive capabilities of the model, which is still largely empirical.

36 MATERIALS SCIENCE↗

xLPR Sim Editor 1.0 User's Guide

The United States Nuclear Regulatory Commission in cooperation with the Electric Power Research Institute contracted Sandia National Laboratories to develop the framework of a probabilistic fracture mechanics assessment code called xLPR ( Extremely Low Probability of Rupture) Version 2.0 . The purpose of xLPR is to evaluate degradation mechanisms in piping systems at nuclear power plants and to predict the probability of rupture. This report is a user's guide for xLPR Sim Editor 1.0 , a graphical user interface for creating and editing the xLPR Version 2.0 input file and for creating, editing, and using the xLPR Version 2.0 database files . The xLPR Sim Editor, provides a user - friendly way for users to change simulation options and input values, s elect input datasets from xLPR data bases, identify inputs needed for a simulation, and create and modify an input file for xLPR.

97 MATHEMATICS AND COMPUTING↗

A nonparametric method for producing isolines of bivariate exceedance probabilities

We present a method for drawing isolines indicating regions of equal joint exceedance probability for bivariate data. The method relies on bivariate regular variation, a dependence framework widely used for extremes. The method we utilize for characterizing dependence in the tail is largely nonparametric. The extremes framework enables drawing isolines corresponding to very low exceedance probabilities and may even lie beyond the range of the data; such cases would be problematic for standard nonparametric methods. Furthermore, we extend this method to the case of asymptotic independence and propose a procedure which smooths the transition from hidden regular variation in the interior to the first-order behavior on the axes. We propose a diagnostic plot for assessing the isoline estimate and choice of smoothing, and a bootstrap procedure to visually assess uncertainty.

97 MATHEMATICS AND COMPUTING↗

New insights into the hydration of slag in alkaline media using a micro-reactor approach

A micro-reactor approach, developed previously, is used to study the reactions of slag in alkaline media. Micron-sized gaps are milled in slag grains using a focused ion beam (FIB) and subsequently filled with alkaline solutions, leading to dissolution and hydration of the slag. After the hydration is stopped, a scanning electron microscope (SEM) is used to image the gaps. We present the effect of pH and nature of the alkaline solution on the slag dissolution and the hydrate morphology. The results obtained in this study confirm that the presence of aluminum and calcium in solution has a strong retarding effect on the slag dissolution. A major implication of these results is that in blended cements, the reactivity of slag probably suffers from the ions released by cement into solution. We show that strongly adsorbing superplasticizers inhibit the dissolution of slag, but only at lower alkali concentrations and C–S–H seeds may also inhibit the dissolution of slag under certain experimental conditions. The obtained results are compared and contrasted with results obtained for alite and tricalcium silicate previously reported in the literature.

36 MATERIALS SCIENCE↗

Accelerated statistical failure analysis of multifidelity TRISO fuel models

Statistical nuclear fuel failure analysis is critical for the design and development of advanced reactor technologies. Although Monte Carlo Sampling (MCS) is a standard method of statistical failure analysis for fuels, the low failure probabilities of some advanced fuel forms and the correspondingly large number of required model evaluations limit its application to low-fidelity (e.g., 1-D) fuel models. In this paper, we present four other statistical methods for fuel failure analysis in Bison, considering tri-structural isotropic (TRISO)-coated particle fuel as a case study. The statistical methods considered are Latin hypercube sampling (LHS), adaptive importance sampling (AIS), subset simulation (SS), and the Weibull theory. Using these methods, we analyzed both 1-D and 2-D representations of TRISO models to compute failure probabilities and the distributions of fuel properties that result in failures. The results of these methods compare well across all TRISO models considered. Overall, SS and the Weibull theory were deemed the most efficient, and can be applied to both 1-D and 2-D TRISO models to compute failure probabilities. Moreover, since SS also characterizes the distribution of parameters that cause TRISO failures, and can consider failure modes not described by the Weibull criterion, it may be preferred over the other methods. Finally, a discussion on the efficacy of different statistical methods of assessing nuclear fuel safety is provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Molecular Dynamics Simulations of Aldol Condensation Catalyzed by Alkylamine-Functionalized Crystalline Silica Surfaces

Molecular dynamics simulations are performed to investigate the cooperatively catalyzed aldol condensation between acetone and 4-nitrobenzaldehyde on alkylamine (or alkylenamine)-grafted silica surfaces, focusing on the mechanism of the catalytic activation of the acetone and 4-nitrobenzaldehyde by the acidic surface silanols followed by the nucleophilic attack of the basic amine functional group toward the activated reactant. From the analysis of the correlations between the catalytically active acid-base sites and reactants, it is concluded that the catalytic cooperativity of the acid-base pair can be affected by two factors: 1) the competition between the silanol and the amine (or enamine) to form a hydrogen bond with a reactant and 2) the flexibility of the alkylamine (or alkylenamine) backbone. Increasing the flexibility of the alkylamine facilitates the nucleophilic attack of the amine on the reactants. From the molecular dynamics simulations, it is found that C 3 propylamine and C 4 butylamine linkers exhibit the highest probability of reaction, which is consistent with the experimental observation that the activity of the aldol reaction on mesoporous silica depends on the length of alkylamine grafted on the silica surface. Furthermore, this simulation work serves as a pioneering study demonstrating how the molecular simulation approach can be successfully employed to investigate the cooperative catalytic activity of such bifunctional acid-base catalysts.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excited states from quantum Monte Carlo in the basis of Slater determinants

Building on the full configuration interaction quantum Monte Carlo (FCIQMC) algorithm introduced recently by Booth et al. [J. Chem. Phys. 131, 054106 (2009)] to compute the ground state of correlated many-electron systems, an extension to the computation of excited states (exFCIQMC) is presented. The Hilbert space is divided into a large part consisting of pure Slater determinants and a much smaller orthogonal part (the size of which is controlled by a cut-off threshold), from which the lowest eigenstates can be removed efficiently. In this way, the quantum Monte Carlo algorithm is restricted to the orthogonal complement of the lower excited states and projects out the next highest excited state. Starting from the ground state, higher excited states can be found one after the other. The Schrödinger equation in imaginary time is solved by the same population dynamics as in the ground state algorithm with modified probabilities and matrix elements, for which working formulae are provided. As a proof of principle, the method is applied to lithium hydride in the 3-21G basis set and to the helium dimer in the aug-cc-pVDZ basis set. It is shown to give the correct electronic structure for all bond lengths. Much more testing will be required before the applicability of this method to electron correlation problems of interesting size can be assessed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Analysis of Repeatability and Reproducibility Studies With Ordinal Measurements

A Bayesian inferential approach with a noninformative prior is introduced to analyze ordinal repeatability and reproducibility (R&R) data using the De Mast–Van Wieringen model. This approach is extended with a weakly informative prior and random effects to allow for the consideration of a population of raters and prediction of a new rater. This random-effects approach is also shown to result in partial pooling of estimates across raters. In addition, match-probability-based measures to decompose ordinal R&R study data into contributions due to repeatability and due to reproducibility are defined. All extensions involving Bayesian inference (for fixed or random effects) and measures are illustrated on real and simulated ordinal R&R study data and are applicable in business and industry settings. This methodology can be implemented using the supplemental R package ordinalRR available from CRAN. Additional supplementary material for this article is available online.

97 MATHEMATICS AND COMPUTING↗

Temperature uncertainty modelling with proxy structural data as geostatistical constraints for well siting: an example applied to Granite Springs Valley, NV, USA

Utilizing existing temperature and structural geology information around Granite Springs Valley, Nevada, we build 3D stochastic temperature models with the aims of evaluating the 3D uncertainty of temperature and choosing between candidate exploration well locations. The data used to support the modelling are measured temperatures and structural proxies from 3D geologic modelling (distance to fault, distance to fault intersections and terminations, Coulomb stress change and dilation tendency), the latter considered ‘secondary’ data. Two stochastic geostatistical techniques are explored for incorporating the structural proxies: cosimulation and local varying mean. With both the cosimulation and local varying mean methods, many equally-likely temperature models (i.e. realizations) are produced, from which temperature probability profiles are calculated at candidate well locations. To aid in choosing between the candidate locations, two quantities summarize the temperature probabilities: V prior and entropy. V prior quantifies the likelihood for economic temperatures at each candidate location, whereas entropy identifies where new information has the most potential to reduce uncertainty. In general, the cosimulation realizations have smoother spatial structure, and extrapolate high temperatures at candidate locations that are located along the direction of the longest spatial correlation, which are down dip from existing temperature logs. The smooth realizations result in tight temperature probability profiles that are easier to interpret, but they have unrealistic temperature reversals in some locations because of the dipping ellipsoid shape created and that the cosimulation technique does not enforce a conductive geothermal gradient as a baseline (i.e. linearly increasing temperature with depth). The local varying mean results produce realizations with more realistic geothermal gradients, with temperatures increasing downward since a depth-temperature relationship is included. However, because they have much noisier spatial nature compared to cosimulation, it is harder to interpret the temperature probability profiles. The different local varying mean results allow the geologist to determine which proxy (e.g. dilation v. distance to fault termination) should be used given the specific geothermal system. In general, V prior from local varying mean results identify locations that are close to high values for the structural proxies: areas with higher probabilities for higher temperatures. The entropy results identify where uncertainty is greatest and therefore new drilling information could be most useful. Though these techniques provide useful information, even when applied to areas of sparse data, our comparison of these two techniques demonstrates the need for new geothermal geostatistics techniques that combine the advantages of these two methods and that are tailored to the spatial uncertainty issues inherent in geothermal exploration.

15 GEOTHERMAL ENERGY↗

Systematic and statistical uncertainties in simulated r -process abundances due to uncertain nuclear masses

Unknown nuclear masses are a major source of nuclear physics uncertainty for r -process nucleosynthesis calculations. Here we examine the systematic and statistical uncertainties that arise in r -process abundance predictions due to uncertainties in the masses of nuclear species on the neutron-rich side of stability. There is a long history of examining systematic uncertainties by the application of a variety of different mass models to r-process calculations. Here we expand upon such efforts by examining six DFT mass models, where we capture the full impact of each mass model by updating the other nuclear properties — including neutron capture rates, β-decay lifetimes, and β-delayed neutron emission probabilities — that depend on the masses. Unlike systematic effects, statistical uncertainties in the r-process pattern have just begun to be explored. Here we apply a global Monte Carlo approach, starting from the latest FRDM masses and considering random mass variations within the FRDM r ms error. Here, we find in each approach that uncertain nuclear masses produce dramatic uncertainties in calculated r -process yields, which can be reduced in upcoming experimental campaigns.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Shielding and activity estimator for template-based nuclide identification methods

According to one embodiment, a method for estimating an activity of one or more radio-nuclides includes receiving one or more templates, the one or more templates corresponding to one or more radio-nuclides which contribute to a probable solution, receiving one or more weighting factors, each weighting factor representing a contribution of one radio-nuclide to the probable solution, computing an effective areal density for each of the one more radio-nuclides, computing an effective atomic number (Z) for each of the one more radio-nuclides, computing an effective metric for each of the one or more radio-nuclides, and computing an estimated activity for each of the one or more radio-nuclides. In other embodiments, computer program products, systems, and other methods are presented for estimating an activity of one or more radio-nuclides.

97 MATHEMATICS AND COMPUTING↗

Calculating Control Rod Differential Worth Using Adjoint-Weighted Method

Recently, there are more and more research on using Monte Carlo method to calculate reactor important parameters. Control rod worth is one of the important parameters as it can determine the critical control rod position. There are two presentations of the control rod worth for utilization purpose, integral and differential. The former is the total reactivity change, while the latter is the reactivity change caused by per unit movement. In Monte Carlo calculation, differential control rod worth of a particular position is estimated by finite difference of reactivity between a small gap divided by gap distance. Though easy to implemented, the problem of this approach lies in that too large gap will enlarge error between 'differential' and 'difference', while too small gap will be disturbed by error caused by random fluctuation. Monte Carlo perturbation theory has been used to calculate the k{sub eff} sensitivity to certain parameters for a long time. By calculating the differential coefficient along with the k{sub eff}, this method is quite time-consuming and relatively accurate compared to finite difference method. Nevertheless, most of perturbation research focus on the perturbation of nuclide density or nuclear data. For geometrical perturbation, limited research was done before. Takahashi estimated the k{sub eff} sensitivity to reflector movement of pulsed fast reactor. MCNP6 used adjoint-weighted method for Godiva, Zeus and uranium oxyfluoride solution container benchmarks. This paper tries to apply the perturbation method to the determination of control rod differential worth. In this paper, based on RMC, a continuous-energy Reactor Monte Carlo transport code, Iterated Fission Probability method (IFP) is researched to calculate control rod differential worth on assembly level. IFP was originally developed by Hurwitz, and has been adopted by most of Monte Carlo code to compute adjoint-weighted parameters. This paper is organized with four parts. The first is introduction. Adjoint-weighted method is introduced in the second part. Problem 4 of benchmark from CASL is built to verify the method. Conclusion is given in final part.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling Stakeholder/Value Dependency through Mean Failure Cost

In an earlier series of works, Boehm et al. discuss the nature of information system dependability and highlight the variability of system dependability according to stakeholders. In a recent paper, the dependency patterns of this model are analyzed. In our recent works, we presented a stakeholder dependent quantitative security model, where we quantify security for a given stakeholder by the mean of the loss incurred by the stakeholder as a result of security threats. We show how this mean can be derived from the security threat configuration (represented as a vector of probabilities that reflect the likelihood of occurrence of the various security threats). We refer to our security metric as MFC, for Mean Failure Cost. In this paper, we analyze Boehm's model from the standpoint of the proposed metric, and show whether, to what extent, and how our metric addresses the issues raised by Boehm's Stakeholder/Value definition of system dependability.

99 GENERAL AND MISCELLANEOUS↗