Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Computational tools and algorithms for ion mobility spectrometry-mass spectrometry

Ion mobility spectrometry-mass spectrometry (IMS-MS or IM-MS) is a powerful analytical technique that combines the gas-phase separation capabilities of IM with the identification and quantification capabilities of MS. IM-MS can differentiate molecules with indistinguishable masses but different structures (e.g., isomers, isobars, molecular classes, and contaminant ions). The importance of this analytical technique is reflected by a staged increase in the number of applications for molecular characterization across a variety of fields, from different MS-based omics (proteomics, metabolomics, lipidomics, etc.) to the structural characterization of glycans, organic matter, proteins, and macromolecular complexes. With the increasing application of IM-MS there is a pressing need for effective and accessible computational tools. This article presents an overview of the most recent free and open-source software tools specifically tailored for the analysis and interpretation of data derived from IM-MS instrumentation. This review enumerates these tools and outlines their main algorithmic approaches, while highlighting representative applications across different fields. Finally, a discussion of current limitations and expectable improvements is presented.

59 BASIC BIOLOGICAL SCIENCES↗

Hydroxide-ion transport and stability of diblock copolymers with a polydiallyldimethyl ammonium hydroxide block

Base-stable amphiphilic diblock copolymers with a polydiallyl dimethyl ammonium hydroxide block were synthesized and characterized to quantify hydroxide-ion transport in the hydrated state; polystyrene was the hydrophobic block. The challenge of synthesizing a copolymer comprising blocks with very different solubility behaviors was addressed by a combination of reversible addition fragmentation chain transfer polymerization and ion metathesis. Both monomers used in the polymerization are commercially available on industrial scales. Hydroxide-ion conductivities of 0.8 mS/cm were achieved in hot-pressed membranes immersed in water at room temperature despite relatively low water uptake (4.2 water molecules per hydroxide ion). Finally, the stability of the polydimethyl ammonium hydroxide chains was investigated in 2 M NaOD at 60 °C.1H NMR spectroscopy studies showed no detectable degradation after 2000 hours.

36 MATERIALS SCIENCE↗

Hypersonic Jets of Detonation Products in the Hydrodynamic Collapse of Macroscopic Voids

Localizing the energetic output from detonation waves has been a long-standing challenge in applied detonation physics. Here, energy localization is achieved via machined millimeter scale voids in pressed samples of PBX 9501, an HMX (1,3,5,7-Tetranitro-1,3,5,7-tetrazocane)-based plastic bonded explosive. A main mechanism of energy localization in these systems, the formation of hydrodynamic jets of dense product gases, is characterized experimentally using a semicylindrical geometry in witness plate impact experiments and streak imaging of the jet propagating into the air. The distance at which the jet is optimally developed is identified and the supersonic flow structure in the vicinity of this feature is explored using hydrocode simulations. This analysis found that most of the kinetic energy of the hydrodynamic jet arises from pressure gradients induced by geometrically mediated squeeze flow lateral to the direction of detonation propagation. This work presents a new development in the control of energetic output from detonation waves and applications to detonation wave shaping are discussed.

42 ENGINEERING↗

Hydrostatic Compression Curve for Triamino-Trinitrobenzene Determined to 13.0 GPa with Powder X-Ray Diffraction

Using powder X-ray diffraction in conjunction with a diamond anvil cell (DAC), the unit cell volume of triamino-trinitrobenzene (TATB) has been measured from ambient pressure to 13 GPa. The resultant isotherm is compared with previous theoretical (Byrd and Rice and Pastine and Bernecker) and experimental (Olinger and Cady) works. While all reports are consistent to approximately 2 GPa, our measurements reveal a slightly stiffer TATB material than reported by Olinger and Cady and an intermediate compressibility compared with the isotherms predicted by the two theoretical works. Analysis of the room temperature isotherm using the semi-empirical, Murnaghan, Birch-Murnaghan, and Vinet equations of state (EOS) provided a determination of the isothermal bulk modulus (K{sub 0}) and its pressure-derivative (K{sub 0}') for TATB. From these fits to our P-V isotherm, from ambient pressure to 8 GPa, the average results for the zero-pressure bulk modulus and its pressure derivative were found to be 14.7 GPa and 10.1, respectively. For comparison to shock experiments on pressed TATB powder and its plastic-bonded formulation PBX 9502 (95% TATB, 5% Kel-F 800), the isotherm was transformed to the pseudo-velocity U{sub s}-u{sub p} plane using the Rankine-Hugoniot jump conditions. This analysis provides an extrapolated bulk sound speed, c{sub 0}=1.70 km s{sup -1}, for TATB and its agreement with a previous determination (c{sub 0}=1.43 km s{sup -1}) is discussed. Furthermore, our P-V and corresponding U{sub s}-u{sub p} curves reveal a subtle cusp at approximately 8 GPa. This cusp is discussed in relation to similar observations made for the aromatic hydrocarbons anthracene, benzene and toluene, graphite, and trinitrotoluene (TNT).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Statistics of Density, Temperature and Air Gaps on the TATB Cylinder Test

In this paper, duplicate cylinder tests (CYLEX) have been run on PBX 9502 and LX-17. The 95 % error in the absolute value of the derived detonation energy density is about ±1 % whereas the 95 % error of the difference error is ±0.5 % or better. The analytic model has been upgraded with a better strain description. The effect of the air gap between a pressed solid explosive and the inner copper wall has been measured and modeled. An off-center effect has also been seen. Density effects on the energy density from 1.82 to 1.92 g cm -3 are described for LX-17. Data has also been taken at -55, 75 and 125 °C. Finally, the last temperature gives a large enough difference to show that the mechanism appears to be only density change.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Nonlinear Resonant Ultrasound Spectroscopy for Predicting Sensitivity to Initiation in Granular High Explosives

Abstract Nonlinear Resonant Ultrasound Spectroscopy (NRUS) is a technique that can measure bulk nonlinear coefficients of the nonlinear elastic modulus for a material. NRUS has been used to identify damage in a variety of granular materials including rocks and concrete. Some energetic materials, such as Pentaerythritol Tetranitrate (PETN), are commonly fielded as pressed granular compacts. It is well known that the sensitivity to initiation of these materials is heavily dependent on their microstructure, and that microstructure changes naturally (becomes damaged) over time. In this study, we examine the use of NRUS to identify changes in microstructure between pristine and thermally aged PETN pellets. In particular, we examine the relationship between the bulk hysteretic nonlinearity, α , of the pellets and time spent at temperature, powder specific surface area (SSA), and sensitivity to initiation. We find that, in general, α does not increase uniformly for all pellets within a single thermal aging condition. However, when the pellets are test fired to determine sensitivity to initiation, there is a strong correlation between α and firing voltage threshold. NRUS‐measured α has the added benefit that the measurements can be made in situ and on benchtop scales.

Schulze, Peter↗

Prediction of Probabilistic Detonation Threshold via Millimeter-Scale Microstructure-Explicit and Void-Explicit Simulations

We present an approach and relevant models for predicting the probabilistic shoc-to-detonation transition (SDT) behavior and Pop plot (PP) of heterogeneous energetic materials (HEM) via mesoscopic microstructure-explicit (ME) and void explicit (VE) simulations at the millimeter (mm) sample size scale. Although the framework here is general, the particular material considered in this paper is pressed Octahydro-1,3,5,7-tetranitro-1,2,3,5-tetrazocine (HMX). To systematically delineate the effects of material heterogeneities, four material cases are considered. These cases are homogeneous material, material with granular microstructure but no voids, homogeneous material with voids, and material with both granular microstructure and voids. Statistically equivalent microstructure sample sets (SEMSS) are generated and used. Eulerian hydrocode simulations explicitly resolve the material heterogeneities, voids, and the coupled mechanical-thermal-chemical processes. In particular, it is found that both microstructure and voids strongly influence the SDT behavior and PP. The effects of different combinations of microstructure heterogeneity and voids on the SDT process and PP are quantified and rank-ordered. The overall framework uses the Mie–Grüneisen equation of state and a history variable reactive burn model (HVRB). A novel probabilistic representation for quantifying the PP is developed, allowing the calculation of (1) the probability of observing SDT at a given combination of shock pressure and run distance, (2) the run-distance to detonation under a given combination of shock pressure and prescribed probability, and (3) the shock pressure required for achieving SDT at a given run distance with a prescribed probability. The results are in agreement with general trends in experimental data in the literature.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Gas Transport in the Insensitive High Explosive PBX 9502

Small-scale laboratory experiments were performed to analyze gas transport mechanics in PBX 9502, an insensitive high explosive (IHE) composition. Two independent investigations are reported here. First, gas permeametry and dynamic pycnometry techniques were used to measure the molecular flow (Knudsen) coefficient and the internally interconnected void fraction of pristine and thermally damaged samples in two uniaxial pressing orientations. The permeability of PBX 9502 was found to be unmeasurably low (of the same order of magnitude as PTFE) with gas transport being diffusion-dominated. Secondly, a pressure vessel experiment was developed to measure quasi-static and dynamic gas generation as the explosive was heated to self-ignition (cookoff). The gas generation results and the permeability/diffusivity findings provide evidence that PBX 9502 remains impermeable until seconds prior to self-ignition. At ignition, internal void-pressure drives macro-scale cracking and the sample becomes uniformly incorporated in the following deconsolidating deflagration. These results are discussed within the context of previous observations of pressure-dependent cookoff behavior of PBX 9502 and provide a more complete description of thermal damage evolution in this explosive composition.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Coefficient of Thermal Expansion during Ratchet Growth of TATB Compactions

Triamino trinitrobenzene (TATB) is an insensitive high explosive, meaning that it is quite immune from accidental detonation and only performs in appropriately engineered configurations. While this is advantageous for applications, the TATB crystal is graphitic and possesses significant thermal and mechanical anisotropy. Compactions of TATB crystals, with or without binder, have been shown to have oriented TATB crystals that relate to the pressing geometry and process, and this TATB texture necessarily imparts microscale and macroscale anisotropy to the compaction. By a mechanism not fully understood, thermal cycling results in irreversible volume expansion (also called ratchet growth) of the compaction likely by creating stress points on the microscale. Changes in density caused by thermal cycling can certainly effect the explosive performance. Our past characterization of the ratchet growth phenomenon has focused on the magnitude of the irreversible strain as measured before and after a thermal cycle. Finally, in the work presented here, we analyze the evolving thermal expansion behavior during the ascending and descending temperature ramps, providing further insight into the material changes taking place during the ratchet growth phenomenon.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Effects of sub‐mm cylindrical voids on detonation performance in PBX 9501

Abstract Internal features of varying scale and geometry are always present in explosives systems. Below a critical length, dependent on the explosive, these features can operate as a driving force for energy concentration and reaction, known as hotspots. At larger length scales, internal features result in jetting and detonation wave shaping, allowing for bulk work to be done by the explosive as is seen in shape charges. To date, a large volume of work has been performed to simulate hotspot ignition and large‐scale wave shaping. However, little experimental data exists on the effects of features in intermediate length scales, 0.1 to 1 millimeter. It has been observed in many tests that these small‐scale features can influence the high explosive (HE) performance and in some cases cause substantial damage to adjacent systems. This work provides quantitative data on the effects of machined voids moderately above more typical hotspot lengths, 0.3–0.8 mm in diameter, in PBX 9501 pressed to 1.785 g cm −3 ±2.5 mg cm −3 . Streak imaging was used to visualize void collapse, jet velocity, re‐initiation time, and wave shape evolution. Delay in detonation front propagation time was found to be linearly dependent on the void diameter and jet velocity was found to be independent within the tested range and resolution. Cut‐back experiments were used to investigate wave shape distortion and evolution downstream of the void, showing consistent growth and decay shapes across all void sizes. Simulations using CTH, a hydrocode by Sandia National Laboratory, were used to investigate void collapse showing agreement with the trends of experimental results but yielded inaccurate wave shape development delay values. Both simulation and experimental results identified several re‐initiation mechanisms with jetting and subsequent double shocking of localized HE being the dominant mechanisms for the void sizes that were studied.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Ultrasound Characterization of Plastic Bonded Explosives With Varied Binder Content and Density

Advanced explosive formulations and methods of production require rapid characterization for both processes and materials. Here, we present results for ultrasound characterization of a plastic bonded explosive (PBX) formulation as a function of binder weight percent and pressing density using through-transmission sound speed measurements. The explosive in this study was composed of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) combined with the fluoropolymer binder Kynar Ultraflex B. Binder content ranged from 2.6 wt.% to 11.5 wt.% with associated explosive formulation densities from 1.69 g/cc to 1.89 g/cc. We find linear and nonlinear changes in longitudinal and shear sound speeds, peak frequencies, and measured elastic properties for the different PBX formulations. These measured changes can differentiate the tested formulations, highlighting the potential for ultrasound as a nondestructive characterization method for newly-formulated PBXs. We also demonstrate through-transmission measurements using different coupling media and present results from an ultrasound technique called resonant ultrasound spectroscopy (RUS). Both transmission and RUS approaches may allow for rapid and even automated characterization of PBX components suitable for high-throughput manufacturing operations.

Engineering↗

Testing and Modeling of Functionally Graded Aluminum-Doped Zinc Oxide Using Spark Plasma Sintering and Discrete Powder Layers of Varying Composition

Functionally graded material (FGM) ZnO is made via spark plasma sintering/field-assisted sintering technique (SPS/FAST) by varying the Al dopant content along the z-axis or pressing direction. A wide range of Al content (0–5 wt%) is used by adding Al powder to nanosized ZnO powder. Thermoelectric (TE) measurements are done on the FGM and individual layers made separately. X-ray diffraction (XRD) shows two phases, ZnO and spinel phase (ZnAl 2 O 4 ). High-resolution Raman spectroscopy reveals doped ZnO and spinel phase (ZnAl 2 O 4 ) spatially and shows segregation in the layer with highest Al content. Electron backscatter diffraction (EBSD) reveals noticeable grain growth with decreasing Al content, and there is a common, random preferred orientation in all layers. The tested properties are used to simulate efficiency curves for a discretely graded, five-layer FGM as well as a homogenous material, where both graded structures provide an opportunity to widen the current density ranges and therefore the temperature range of useful energy conversion.

36 MATERIALS SCIENCE↗

Synthesis and thermoelectric properties of Cu excess Cu2ZnSnSe4

Quaternary stannites with an excess of copper were successfully synthesized by reacting the constituent elements and subsequent solid state annealing, followed by densification by hot-pressing. The composition for each specimen was confirmed with a combination of Rietveld refinement and elemental analysis. Their high temperature thermoelectric properties were measured from 300 K to 800 K and compared with that of Cu2ZnSnSe4. The thermal conductivity decreases significantly with increasing Cu content at elevated temperatures due to the crystal structure of this material system. A maximum ZT value of 0.86 was obtained at 800 K for the specimen with the highest Cu content, Cu2.2Zn0.8SnSe4.

thermoelectric↗

Open Chemistry, JupyterLab, REST, and quantum chemistry

Quantum chemistry must evolve if it wants to fully leverage the benefits of the internet age, where the worldwide web offers a vast tapestry of tools that enable users to communicate and interact with complex data at the speed and convenience of a button press. The Open Chemistry project has developed an open-source framework that offers an end-to-end solution for producing, sharing, and visualizing quantum chemical data interactively on the web using an array of modern tools and approaches. These tools build on some of the best open-source community projects such as Jupyter for interactive online notebooks, coupled with 3D accelerated visualization, state-of-the-art computational chemistry codes including NWChem and Psi4, and emerging machine learning and data mining tools such as ChemML and ANI. They offer flexible formats to import and export data, along with approaches to compare computational and experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Progress on Dominant Sulfide‐Type Solid‐State Na Superionic Conductors for Solid‐State Sodium Batteries

Abstract Over the past decade, solid‐state batteries have garnered significant attentions due to their potentials to deliver high energy density and excellent safety. Considering the abundant sodium (Na) resources in contrast to lithium (Li), the development of sodium‐based batteries has become increasingly appealing. Sulfide‐based superionic conductors are widely considered as promising solid eletcrolytes (SEs) in solid‐state Na batteries due to the features of high ionic conductivity and cold‐press densification. In recent years, tremendous efforts have been made to investigate sulfide‐based Na‐ion conductors on their synthesis, compositions, conductivity, and the feasibility in batteries. However, there are still several challenges to overcome for their practical applications in high performance solid‐state Na batteries. This article provides a comprehensive update on the synthesis, structure, and properties of three dominant sulfide‐based Na‐ion conductors (Na 3 PS 4 , Na 3 SbS 4 , and Na 11 Sn 2 PS 12 ), and their families that have a variety of anion and cation doping. Additionally, the interface stability of these sulfide electrolytes toward the anode is reviewed, as well as the electrochemical performance of solid‐state Na batteries based on different types of cathode materials (metal sulfides, oxides, and organics). Finally, the perspective and outlook for the development and practical utilization of sulfide‐based SE in solid‐state batteries are discussed.

Guo, Xiaolin↗

2D Nitrogen‐Doped Graphene Materials for Noble Gas Separation

Abstract Noble gases, notably xenon, play a pivotal role in diverse high‐tech applications. However, manufacturing xenon is an inherently challenging task, due to its unique properties and trace abundance in the Earth's atmosphere. Consequently, there is a pressing need for the development of efficient methods for the separation of noble gases. Using mild fluorographene chemistry, nitrogen‐doped graphene (GNs) materials are synthesized with abundant aromatic regions and extensive nitrogen doping within the vacancies and holes of the aromatic lattice. Due to the organized interlayer “nanochannels”, nitrogen functional groups, and defects within the two‐dimensional (2D) structures, GNs exhibits effective selectivity for Xe over Kr at low pressure. This enhanced selectivity is attributed to the stronger binding affinity of Xe to GN compared to Kr. The adsorption is governed by London dispersion forces, as revealed by theoretical calculations using symmetry‐adapted perturbation theory (SAPT). Investigation of other GNs differing in nitrogen content, surface area, and pore sizes underscores the significance of nitrogen functional groups, defects, and interlayer nanochannels over the surface area in achieving superior selectivity. This work offers a new perspective on the design and fabrication of functionalized graphene derivatives, exhibiting superior noble gas storage and separation activity exploitable in gas production technologies.

Šedajová, Veronika↗

Soybean genomics research community strategic plan: A vision for 2024–2028

Abstract This strategic plan summarizes the major accomplishments achieved in the last quinquennial by the soybean [Glycine max(L.) Merr.] genetics and genomics research community and outlines key priorities for the next 5 years (2024–2028). This work is the result of deliberations among over 50 soybean researchers during a 2‐day workshop in St Louis, MO, USA, at the end of 2022. The plan is divided into seven traditional areas/disciplines: Breeding, Biotic Interactions, Physiology and Abiotic Stress, Functional Genomics, Biotechnology, Genomic Resources and Datasets, and Computational Resources. One additional section was added, Training the Next Generation of Soybean Researchers, when it was identified as a pressing issue during the workshop. This installment of the soybean genomics strategic plan provides a snapshot of recent progress while looking at future goals that will improve resources and enable innovation among the community of basic and applied soybean researchers. We hope that this work will inform our community and increase support for soybean research.

Genetics & Heredity↗

Imaging of Lipids and Metabolites Using Nanospray Desorption Electrospray Ionization Mass Spectrometry

In recent years, mass spectroscopy imaging (MSI) has emerged as a foundational technique in metabolomics and drug screening providing deeper understanding of complex mechanistic pathways within biochemical systems and biological organisms. We have been invited to contribute a chapter to a new Springer series volume, entitled “Mass Spectrometry Imaging of Small Molecules”. The volume is planned for the highly successful lab protocol series Methods in Molecular Biology, published by Humana Press, USA. The volume is aimed to equip readers with step-by-step mass spectrometric imaging protocols and bring rapidly maturing methods of MS imaging to life science researchers. The chapter will provide a detailed protocol of ambient MSI by use of nanospray desorption electrospray ionization.

Lanekoff, Ingela↗