Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Structural, photoconductivity, and dielectric studies of polythiophene-tin oxide nanocomposites

Highlights: • Synthesis of polythiophene-tin oxide nanocomposites confirmed by FTIR and EDAX. • SEM shows SnO{sub 2} nanoparticles embedded within polythiophene matrix. • Stability and isoelectric point suggest nanoparticle–matrix interaction. • High dielectric constant due to high Maxwell–Wagner interfacial polarization. - Abstract: Polythiophene-tinoxide (PT-SnO{sub 2}) nanocomposites were prepared by in situ chemical oxidative polymerization, in the presence of various concentrations of SnO{sub 2} nanoparticles. Samples were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and Zeta potential measurements. Morphologies and elemental compositions were investigated by transmission electron microscopy, field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. The photoconductivity of the nanocomposites was studied by field-dependent dark and photo conductivity measurements. Their dielectric properties were investigated using dielectric spectroscopy, in the frequency range of 1kHz–1 MHz. The results indicated that the SnO{sub 2} nanoparticles in the PT-SnO{sub 2} nanocomposite were responsible for its enhanced dielectric performance.

36 MATERIALS SCIENCE↗

Improved dielectric properties of lead lanthanum zirconate titanate thin films on copper substrates.

Thin films of lead lanthanum zirconate titanate (PLZT) were directly deposited on copper substrates by chemical solution deposition and crystallized at temperatures of {approx} 650 C under low oxygen partial pressure (pO{sub 2}) to create film-on-foil capacitor sheets. The dielectric properties of the capacitors formed have much improved dielectric properties compared to those reported previously. The key to the enhanced properties is a reduction in the time that the film is exposed to lower pO{sub 2} by employing a direct insertion strategy to crystallize the films together with the solution chemistry employed. Films exhibited well-saturated hysteresis loops with remanent polarization of {approx} 20 {micro}C/cm{sup 2}, dielectric constant of > 1100, and dielectric loss of < 0.07. Energy densities of {approx} 32 J/cm{sup 3} were obtained at a field of {approx} 1.9 MV/cm on a {approx} 1 {micro}m thick film with 250 {micro}m Pt electrodes.

36 MATERIALS SCIENCE↗

Influence of solar heating on the performance of integrated solar cell microstrip patch antennas

The integration of microstrip patch antennas with photovoltaics has been proposed for applications in autonomous wireless communication systems located on building facades. Full integration was achieved using polycrystalline silicon solar cells as both antenna ground plane and direct current power generation in the same device. An overview of the proposed photovoltaic antenna designs is provided and the variation characterised of the electromagnetic properties of the device with temperature and solar radiation. Measurements for both copper and solar antennas are reported on three different commercial laminates with contrasting values for thermal coefficient of the dielectric constant. (author)

14 SOLAR ENERGY↗

An ab initio study of the electronic structure and optical properties of CdS{sub 1-x}Te{sub x} alloys

The structural, electronic and optical properties of cubic CdS{sub 1-x}Te{sub x} alloys, with Te-concentrations varying from 0% up to 100% are investigated. The calculations are based on the total-energy calculations using the full potential-linearized augmented plane wave (FP-LAPW) method. The exchange and correlation potential is treated by the generalized-gradient approximation (GGA) for the total-energy calculations, while for electronic properties in addition to that the Engel-Vosko (EV-GGA) formalism was also applied. The ground state properties for all Te-concentrations are presented. The optical dielectric constant is also determined for both the binary and their related ternary alloys. (author)

36 MATERIALS SCIENCE↗

Analysis of Wear Mechanisms in Low Friction, Nanocomposite AlMgB14-TiB2 Coatings

Recent developments in coating science and technology offer new opportunities to enhance the energy-efficiency and performance of industrial machinery such as hydraulic fluid pumps and motors. The lubricated friction and wear characteristics of two wear-resistant coatings, diamond-like carbon and a nanocomposite material based on AlMgB{sub 14}-50 vol.% TiB{sub 2}, were compared in pin-on-disk tribotests using Mobil DTE-24{trademark} oil as the lubricant. In each case, the pins were fixed 9.53 mm diameter spheres of AISI 52100 steel, the load was 10 N, and the speed 0.5 m/s in all tests. Average steady-state friction coefficient values of 0.10 and 0.08 were measured for the DLC and nanocomposite, respectively. The coatings and their 52100 steel counterfaces were analyzed after the tests by X-ray photoelectron and Auger spectroscopy for evidence of material transfer or tribo-chemical reactions. The low-friction behavior of the boride nanocomposite coating is due to the formation of lubricative boric acid, B(OH){sub 3}. In contrast, the low-friction behavior of the DLC coating is related to the relatively low dielectric constant of the oil-based lubricant, leading to desorption of surface hydrogen from the coating.

08 HYDROGEN↗

Selective Plasmonic Gas Sensing: H2, NO2, and CO Spectral Discrimination by a Single Au-CeO2 Nanocomposite Film

A Au-CeO2 nanocomposite film has been investigated as a potential sensing element for high-temperature plasmonic sensing of H2, CO, and NO2 in an oxygen containing environment. The CeO2 thin film was deposited by molecular beam epitaxy (MBE) and Au was implanted into the as-grown film at an elevated temperature followed by high temperature annealing to form well-defined Au nanoclusters. The Au-CeO2 nanocomposite film was characterized by x-ray diffraction (XRD) and Rutherford backscattering spectrometry (RBS). For the gas sensing experiments, separate exposures to varying concentrations of H2, CO, and NO2 were performed at a temperature of 500°C in oxygen backgrounds of 5.0, 10, and ~21% O2. Changes in the localized surface plasmon resonance (LSPR) absorption peak were monitored during gas exposures and are believed to be the result of oxidation-reduction processes that fill or create oxygen vacancies in the CeO2. This process affects the LSPR peak position either by charge exchange with the Au nanoparticles or by changes in the dielectric constant surrounding the particles. Multivariate analysis was used to gauge the inherent selectivity of the film between the separate analytes. From principal component analysis (PCA), unique and identifiable responses were seen for each of the analytes. Linear discriminant analysis (LDA) was also used and showed separation between analytes as well as trends in gas concentration. Results indicate that the Au-CeO2 thin film is selective to O2, H2, CO, and NO2 in separate exposures. Combined with the observed stability over long exposure periods, the Au-CeO2 film shows good potential as an optical sensing element for harsh environmental conditions.

36 MATERIALS SCIENCE↗

Pareto Optimization of Oligomer Polarizability and Dipole Moment Using a Genetic Algorithm

High-performance electronic components are highly sought after in order to produce increasingly smaller and cheaper electronic devices. Drawing inspiration from inorganic dielectric materials, in which both polarizability and polarization contribute, organic materials can also maximize both. For a large set of small molecules drawn from PubChem, a Pareto-like front appears between the polarizability and dipole moment, indicating the presence of an apparent trade-off between these two properties. We tested this balance in π-conjugated materials by searching for novel conjugated hexamers with simultaneously large polar- izabilities and dipole moments with potential use for dielectric materials. Using a genetic algorithm (GA) screening technique in conjunction with an approximate density functional tight-binding method for property calculations, we were able to efficiently search chemical space for optimal hexamers. Given the scope of chemical space, using the GA technique saves considerable time and resources by speeding up molecular searches compared to a systematic search. Here, we also explored the underlying structure–function relationships, including sequence and monomer properties, that characterize large polarizability and dipole moment regimes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Protein Binding and the Electronic Properties of Iron(II) Complexes: An Electrochemical and Optical Investigation of Outer Sphere Effects

Metalloenzymes and electron transfer proteins influence the electrochemical properties of metal cofactors by controlling the second-sphere environment of the protein active site. Properties that tune this environment include the dielectric constant, templated charge structure, van der Waals interactions, and hydrogen bonds. By systematically varying the binding of a redox-active ligand with a protein, we can evaluate how these noncovalent interactions alter the electronic structure of the bound metal complex. For this study, we employ the well-characterized avidin-biotin conjugate as the protein-ligand system, and have synthesized solvatochromic biotinylated and desthiobiotinylated iron(II) bipyridine tetracyano complexes ([Fe(BMB)(CN){sub 4}]{sup 2-} (1) and [Fe(DMB)(CN){sub 4}]{sup 2-} (2)). The binding affinities of 1 and 2 with avidin are 3.5 x 10{sup 7} M{sup -1} and 1.5 x 10{sup 6} M{sup -1}, respectively. The redox potentials of 1 and 2 (333 mV and 330 mV) shift to 193 mV and 203 mV vs Ag/AgCl when the complex is bound to avidin and adsorbed to a monolayer-coated gold electrode. Upon binding to avidin, the MLCT1 band red-shifts 20 nm for 1 and 10 nm for 2. Similarly, the MLCT2 band for 1 red-shifts 7 nm and the band for 2 red-shifts 6 nm. For comparison, the electronic properties of 1 and 2 were investigated in organic solvents, and similar shifts in the MLCT bands and redox potentials were observed. An X-ray crystal structure of 1 bound to avidin was obtained, and molecular dynamics simulations were performed to analyze the protein environment of the protein-bound transition metal complexes. Our studies demonstrate that changes in the binding affinity of a ligand-receptor pair influence the outer-sphere coordination of the ligand, which in turn affects the electronic properties of the bound complex.

08 HYDROGEN↗

Displacive Ordering Transitions in Perovskite-Like AgNb0.5Ta0.5O3

Displacive phase transitions in perovskite-like solid solutions AgNb{sub 1/2}Ta{sub 1/2}O{sub 3} were studied using several diffraction and spectroscopic techniques sensitive to average and local structures. The room-temperature phase of AgNb{sub 1/2}Ta{sub 1/2}O{sub 3} (M{sub 2}) is analogous to that of the end-member AgNbO{sub 3} and exhibits Pbcm orthorhombic symmetry with lattice parameters {radical}2a{sub c} x {radical}2a{sub c} x 4a{sub c} (a{sub c} {approx} 4 {angstrom} refers to an ideal cubic perovskite cell). This structure combines complex octahedral tilting and average antipolar B-cation (Nb, Ta) displacements. Similar to AgNbO{sub 3}, at higher temperatures, B-cations are disordered among multiple sites displaced along <111>{sub c} directions. Partial ordering of local B-cation displacements is manifested in the so-called M{sub 3} {leftrightarrow} M{sub 2} transition, which preserves the average Pbcm symmetry determined by the tilted octahedral framework; the transition is accompanied by a broad exploitable maximum of dielectric constant. Ta substitution suppresses this ordering because of the dissimilar off-centering trends for Ta and Nb. According to the extended X-ray absorption fine structure (EXAFS) measurements, Nb cations exhibit much larger local off-center displacements than Ta, consistent with larger dielectric constants typically displayed by niobates compared to tantalates. AgNb{sub 1/2}Ta{sub 1/2}O{sub 3} maintains residual 8-site disorder down to low temperatures as opposed to 2-site disorder in AgNbO{sub 3}. Our results suggest that Ag cations also exhibit displacive disorder and, on cooling, undergo ordering coupled to that of the B-cations.

36 MATERIALS SCIENCE↗

Charge Conduction and Breakdown Mechanisms in Self-Assembled Nanodielectrics

Developing alternative high dielectric constant (k) materials for use as gate dielectrics is essential for continued advances in conventional inorganic CMOS and organic thin film transistors (OTFTs). Thicker films of high-k materials suppress tunneling leakage currents while providing effective capacitances comparable to those of thin films of lower-k materials. Self-assembled monolayers (SAMs) and multilayers offer attractive options for alternative OTFT gate dielectrics. One class of materials, organosilane-based self-assembled nanodielectrics (SANDs), has been shown to form robust films with excellent insulating and surface passivation properties, enhancing both organic and inorganic TFT performance and lowering device operating voltages. Since gate leakage current through the dielectric is one factor limiting continued TFT performance improvements, we investigate here the current (voltage, temperature) (I (V,T)) transport characteristics of SAND types II ({Pi}-conjugated layer) and III ({sigma}-saturated + {Pi}-conjugated layers) in Si/native SiO{sub 2}/SAND/Au metal-insulator-metal (MIS) devices over the temperature range -60 to +100 C. It is found that the location of the {Pi}-conjugated layer with respect to the Si/SiO{sub 2} substrate surface in combination with a saturated alkylsilane tunneling barrier is crucial in controlling the overall leakage current through the various SAND structures. For small applied voltages, hopping transport dominates at all temperatures for the {Pi}-conjugated system (type II). However, for type III SANDs, the {sigma}- and {Pi}- monolayers dominate the transport in two different transport regimes: hopping between +25 C and +100 C, and an apparent switch to tunneling for temperatures below 25 C. The {sigma}-saturated alkylsilane tunneling barrier functions to reduce type III current leakage by blocking injected electrons, and by enabling bulk-dominated (Poole-Frenkel) transport vs electrode-dominated (Schottky) transport in type II SANDs. These observations provide insights for designing next-generation self-assembled gate dielectrics, since the bulk-dominated transport resulting from combining {sigma}- and {Pi}-layers should enable realization of gate dielectrics with further enhanced performance.

36 MATERIALS SCIENCE↗

Molecular Dynamics Simulation of the AgCl/Electrolyte Interfacial Capacity

Molecular dynamics simulation of the AgCl(100)/KCl (aq) interfacial electrostatic capacity is presented. The simulations are motivated by the need to reduce ambiguities in electrical double layer model parametrization, which here we attempt by reducing the computed interfacial molecular structure to hypothetical planes of charge separation consistent with a treatment of the interface in terms of parallel plate capacitors. The calculated interfacial capacity (c int = 8.43 μF/cm 2 ) is in excellent agreement with measurements for the closely related AgI/electrolyte interface, and the dependence on electrolyte concentration and temperature are qualitatively similar to experimental observations. Molecular dynamics based capacity profiles show a similar overall decay to the classical Helmholtz model, validating its use for approximating the interfacial capacity at relatively high electrolyte concentration. However, fine structure is present and the interfacial electrostatic properties oscillate with distance from the surface. Finally, the dielectric constant for first layer water is calculated to equal 5.1, which confirms that water nearest the interface is under dielectric saturation conditions.

36 MATERIALS SCIENCE↗

[CuCln](2-n) Ion-Pair Species in 1-Ethyl-3-Methylimidazolium Chloride Ionic Liquid-Water Mixtures: Ultraviolet-Visible, X-ray Absorbtion Fine Structure, and Density Functional Theory Characterization

We report details of the coordination environment about Cu(II) in a pure ionic liquid, 1- ethyl-3-methylimidazolium chloride ([EMIM]Cl) and in mixtures containing varying amounts of water from 0-100% of the [EMIM]Cl. There are many stages in the ion pairing of the divalent cation, Cu(II) including the contact ion pairing of Cu2+ with multiple Cl- to form various CuCln (2-n) polyanions. Thereis also the subsequent solvation and ion pairing of the polychlorometallate anion with the EMIM+ cation. Using a combination of x-ray absorption fine structure (XAFS), UV-Vis spectroscopy and electronic structure calculations (TDDFT) we are able to follow the detailed structural changes about Cu(II). Ion pair formation is strongly promoted in [EMIM]Cl by the low dielectric constant and by the extensive breakdown of the water hydrogen bond network in [EMIM]Cl/water mixtures. In the [EMIM]Cl solvent the CuCl4 2- species dominates and it’s geometry is quite similar to gas-phase structure. These results are important in understanding catalysis and separation processes involving transition metals in ionic liquid systems.

08 HYDROGEN↗

Universal Solvation Model Based on Solute Electron Density and on a Continuum Model of the Solvent Defined by the Bulk Dielectric Constant and Atomic Surface Tensions

We present a new continuum solvation model based on the quantum mechanical charge density of a solute molecule interacting with a continuum description of the solvent. The model is called SMD, where the “D” stands for “density” to denote that the full solute electron density is used without defining partial atomic charges. “Continuum” denotes that the solvent is not represented explicitly but rather as a dielectric medium with surface tension at the solute-solvent boundary. SMD is a universal solvation model, where “universal” denotes its applicability to any charged or uncharged solute in any solvent or liquid medium for which a few key descriptors are known (in particular, dielectric constant, refractive index, bulk surface tension, and acidity and basicity parameters). The model separates the observable solvation free energy into two main components. The first component is the bulk electrostatic contribution arising from a self-consistent reaction field treatment that involves the solution of the nonhomogeneous Poisson equation for electrostatics in terms of the integral-equation-formalism polarizable continuum model (IEF-PCM). The cavities for the bulk electrostatic calculation are defined by superpositions of nuclear-centered spheres. The second component is called the cavity-dispersion-solvent-structure term and is the contribution arising from short-range interactions between the solute and solvent molecules in the first solvation shell. This contribution is a sum of terms that are proportional (with geometry-dependent proportionality constants called atomic surface tensions) to the solvent-accessible surface areas of the individual atoms of the solute. The SMD model has been parametrized with a training set of 2821 solvation data including 112 aqueous ionic solvation free energies, 220 solvation free energies for 166 ions in acetonitrile, methanol, and dimethyl sulfoxide, 2346 solvation free energies for 318 neutral solutes in 91 solvents (90 nonaqueous organic solvents and water), and 143 transfer free energies for 93 neutral solutes between water and 15 organic solvents. The elements present in the solutes are H, C, N, O, F, Si, P, S, Cl, and Br. The SMD model employs a single set of parameters (intrinsic atomic Coulomb radii and atomic surface tension coefficients) optimized over six electronic structure methods: M05-2X/MIDI!6D, M05-2X/6-31G*, M05-2X/6-31+G**, M05-2X/cc-pVTZ, B3LYP/6-31G*, and HF/6-31G*. Although the SMD model has been parametrized using the IEF-PCM protocol for bulk electrostatics, it may also be employed with other algorithms for solving the nonhomogeneous Poisson equation for continuum solvation calculations in which the solute is represented by its electron density in real space. This includes, for example, the conductor-like screening algorithm. With the 6-31G* basis set, the SMD model achieves mean unsigned errors of 0.6-1.0 kcal/mol in the solvation free energies of tested neutrals and mean unsigned errors of 4 kcal/mol on average for ions with either Gaussian03 or GAMESS.

36 MATERIALS SCIENCE↗

Ion Segregation and Deliquescence of Alkali Halide Nanocrystals on SiO2

The adsorption of water on alkali halide (KBr, KCl, KF, NaCl) nanocrystals on SiO{sub 2} and their deliquescence was investigated as a function of relative humidity (RH) from 8% to near saturation by scanning polarization force microscopy. At low humidity, water adsorption solvates ions at the surface of the crystals and increases their mobility. This results in a large increase in the dielectric constant, which is manifested in an increase in the electrostatic force and in an increase in the apparent height of the nanocrystals. Above 58% RH, the diffusion of ions leads to Ostwald ripening, where larger nanocrystals grow at the expense of the smaller ones. At the deliquescence point, droplets were formed. For KBr, KCl, and NaCl, the droplets exhibit a negative surface potential relative to the surrounding region, which is indicative of the preferential segregation of anions to the air/solution interface.

36 MATERIALS SCIENCE↗

Comparison of cation adsorption by isostructural rutile and cassiterite.

Macroscopic net proton charging curves for powdered rutile and cassiterite specimens with the (110) crystal face predominant, as a function of pH in RbCl and NaCl solutions, trace SrCl{sub 2} in NaCl, and trace ZnCl{sub 2} in NaCl and Na Triflate solutions, are compared to corresponding molecular-level information obtained from static DFT optimizations and classical MD simulations, as well as synchrotron X-ray methods. The similarities and differences in the macroscopic charging behavior of rutile and cassiterite largely reflect the cation binding modes observed at the molecular level. Cation adsorption is primarily inner-sphere on both isostructural (110) surfaces, despite predictions that outer-sphere binding should predominate on low bulk dielectric constant oxides such as cassiterite ({epsilon}{sub bulk} {approx} 11). Inner-sphere adsorption is also significant for Rb{sup +} and Na{sup +} on neutral surfaces, whereas Cl{sup -} binding is predominately outer-sphere. As negative surface charge increases, relatively more Rb{sup +}, Na{sup +}, and especially Sr{sup 2+} are bound in highly desolvated tetradentate fashion on the rutile (110) surface, largely accounting for enhanced negative charge development relative to cassiterite. Charging curves in the presence of Zn{sup 2+} are very steep but similar for both oxides, reflective of Zn{sup 2+} hydrolysis (and accompanying proton release) during the adsorption process, and the similar binding modes for ZnOH{sup +} on both surfaces. These results suggest that differences in cation adsorption between high and low bulk dielectric constant oxides are more subtly related to the relative degree of cation desolvation accompanying inner-sphere binding (i.e., more tetradentate binding on rutile), rather than distinct inner- and outer-sphere adsorption modes. Cation desolvation may be favored at the rutile (110) surface in part because inner-sphere water molecules are bound further from and less tightly than on the cassiterite (110) surface. Hence, their removal upon inner-sphere cation binding is relatively more favorable.

36 MATERIALS SCIENCE↗

Ion-Pair Reorganization Regulates Reactivity in Photoredox Catalysts

Cyclometalated and polypyridyl complexes of d6 metals are promising photoredox catalysts, using light to drive reactions with high kinetic or thermodynamic barriers via the generation of reactive radical intermediates. However, while tuning of their redox potentials, absorption energy, excited-state lifetime and quantum yield are well-known criteria for modifying activity, other factors could be important. Here we show that dynamic ion-pair reorganization controls the reactivity of a photoredox catalyst, [Ir[dF(CF3)ppy]2(dtbpy)]X. Time-resolved dielectric-loss experiments show how counter-ion identity influences excited-state charge distribution, evincing large differences in both the ground- and excited-state dipole moment depending on whether X is a small associating anion (PF6-) that forms a contact-ion pair versus a large one that either dissociates or forms a solvent-separated pair (BArF4-). These differences correlate with the reactivity of the photocatalyst toward both reductive and oxidative electron transfer, amounting to a 4-fold change in selectivity toward oxidation versus reduction. These results suggest that ion pairing could be an underappreciated factor that modulates reactivity in ionic photoredox catalysts.

catalysis↗

Surface chemistry : a non-negligible parameter in determining optical properties of small colloidal metal nanoparticles.

Surface chemistry can become pronounced in determining the optical properties of colloidal metal nanoparticles as the nanoparticles become so small (diameters <20 nm) that the surface atoms, which can undergo chemical interactions with the environment, represent a significant fraction of the total number of atoms although this effect is often ignored. For instance, formation of chemical bonds between surface atoms of small metal nanoparticles and capping molecules that help stabilize the nanoparticles can reduce the density of conduction band electrons in the surface layer of metal atoms. This reduced electron density consequently influences the frequency-dependent dielectric constant of the metal atoms in the surface layer and, for sufficiently high surface to volume ratios, the overall surface plasmon resonance (SPR) absorption spectrum. The important role of surface chemistry is highlighted here by carefully analyzing the classical Mie theory and a multi-layer model is presented to produce more accurate predictions by considering the chemically reduced density of conduction band electrons in the outer shell of metal atoms in nanoparticles. Calculated absorption spectra of small Ag nanoparticles quantitatively agree with the experimental results for our monodispersed Ag nanoparticles synthesized via a well-defined chemical reduction process, revealing an exceptional size-dependence of absorption peak positions: the peaks first blue-shift followed by a turnover and a dramatic red-shift as the particle size decreases. A comprehensive understanding of the relationship between surface chemistry and optical properties is beneficial to exploit new applications of small colloidal metal nanoparticles, such as colorimetric sensing, electrochromic devices, and surface enhanced spectroscopies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗