Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Organization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Loamy sand soil approaches organic carbon saturation after 37 years of conservation tillage

Conservation tillage is reported to increase soil organic carbon (SOC) and total nitrogen (TN) contents, but long-term (>30 yr) field results quantifying the responses in Coastal Plain Ultisols are sparse. The distribution, accumulation, and topsoil storage of SOC and TN after 37 yr of crop production using conventional (CvT) or conservation tillage (CnT) on a Norfolk loamy sand (fine-loamy, kaolinitic, thermic, Typic Kandiudults) were quantified. Soil samples were collected annually from the 0-5-, 5-10-, and 10-15-cm depth increments beneath corn (Zea mays L.), soybean [Glycine max (L.) Merr.], and cotton (Gossypium hirsutum L.) crops. Overall, SOC and TN accumulation in the 0-5-cm depth were highest for Norfolk soil under CnT. Focusing on total long-term changes for the 0-15-cm sampling depth beneath various corn crops shows that CnT and CvT sequestered 24.7 and 21.4 Mg C ha -1 , respectively. Between 1978 and 2016, there was a highly significant (P < .0001) exponential increase in SOC within the top 5-cm soil depth. However, the exponential curves began to plateau suggesting the Norfolk topsoil was approaching its organic carbon (OC) storage capacity. These field measurements strongly indicate that additional topsoil SOC increases with current tillage and crop management practices are limited.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Lactone Backbone Density in Rigid Electron-Deficient Semiconducting Polymers Enabling High n-type Organic Thermoelectric Performance

We report three lactone-based rigid semiconducting polymers were designed to overcome major limitations in the development of n-type organic thermoelectrics, namely electrical conductivity and air stability. Experimental and theoretical investigations demonstrated that increasing the lactone group density by increasing the benzene content from 0% benzene (P-0), to 50% (P-50), and 75% (P-75) resulted in progressively larger electron affinities (up to 4.37 eV), suggesting a more favorable doping process, when employing (N-DMBI) as the dopant. Larger polaron delocalization was also evident, due to the more planarized conformation, which is proposed to lead to a lower hopping energy barrier. As a consequence, the electrical conductivity increased by three orders of magnitude, to achieve values of up to 12 S/cm and Power factors of 13.2 μWm -1 K -2 were thereby enabled. These findings present new insights into material design guidelines for the future development of air stable n-type organic thermoelectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Grazing-Incidence Texture Tomography and Diffuse Reflectivity Tomography of an Organic Semiconductor Device Array

The use of grazing-incidence scattering methods for the characterization of 2D patterned organic thin films is limited due to the elongated 1D footprint of the X-ray beam on the sample. However, this characteristic feature can be turned into an advantage, when combined with tomographic reconstruction. In this pilot study we show, how the use of a chosen texture reflection and a diffuse reflectivity signal can each provide 2D images of the deposits, simultaneously revealing the organic film's crystal orientation and the location of the metal electrodes in a field-effect transistor structure from a single sequence of diffraction images.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Status of genome function annotation in model organisms and crops

Abstract Since the entry into genome‐enabled biology several decades ago, much progress has been made in determining, describing, and disseminating the functions of genes and their products. Yet, this information is still difficult to access for many scientists and for most genomes. To provide easy access and a graphical summary of the status of genome function annotation for model organisms and bioenergy and food crop species, we created a web application ( https://genomeannotation.rheelab.org ) to visualize, search, and download genome annotation data for 28 species. The summary graphics and data tables will be updated semi‐annually, and snapshots will be archived to provide a historical record of the progress of genome function annotation efforts. Clear and simple visualization of up‐to‐date genome function annotation status, including the extent of what is unknown, will help address the grand challenge of elucidating the functions of all genes in organisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Interactions with microbial consortia have variable effects in organic carbon and production of exometabolites among genotypes of Populus trichocarpa

Abstract Poplar is a short‐rotation woody crop frequently studied for its significance as a sustainable bioenergy source. The successful establishment of a poplar plantation partially depends on its rhizosphere—a dynamic zone governed by complex interactions between plant roots and a plethora of commensal, mutualistic, symbiotic, or pathogenic microbes that shape plant fitness. In an exploratory endeavor, we investigated the effects of a consortium consisting of ectomycorrhizal fungi and a beneficial Pseudomonas sp. strain GM41 on plant growth (including height, stem girth, leaf, and root growth) and as well as growth rate over time, across four Populus trichocarpa genotypes. Additionally, we compared the level of total organic carbon and plant exometabolite profiles across different poplar genotypes in the presence of the microbial consortium. These data revealed no significant difference in plant growth parameters between the treatments and the control across four different poplar genotypes at 7 weeks post‐inoculation. However, total organic carbon and exometabolite profiles were significantly different between the genotypes and the treatments. These findings suggest that this microbial consortium has the potential to trigger early signaling responses in poplar, influencing its metabolism in ways crucial for later developmental processes and stress tolerance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Multi-Step Crystallization of Self-Organized Spiral Eutectics

A method for the solidification of metallic alloys involving spiral self-organization is presented as a new strategy for producing large-area chiral patterns with emergent structural and optical properties, with attention to the underlying mechanism and dynamics. This study reports the discovery of a new growth mode for metastable, two-phase spiral patterns from a liquid metal. Crystallization proceeds via a non-classical, two-step pathway consisting of the initial formation of a polytetrahedral seed crystal, followed by ordering of two solid phases that nucleate heterogeneously on the seed and grow in a strongly coupled fashion. Crystallographic defects within the seed provide a template for spiral self-organization. These observations demonstrate the ubiquity of defect-mediated growth in multi-phase materials and establish a pathway toward bottom-up synthesis of chiral materials with an inter-phase spacing comparable to the wavelength of infrared light. Given that liquids often possess polytetrahedral short-range order, our results are applicable to many systems undergoing multi-step crystallization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hydrodynamically Controlled Self‐Organization in Mixtures of Active and Passive Colloids

Abstract Active particles are known to exhibit collective behavior and induce structure in a variety of soft‐matter systems. However, many naturally occurring complex fluids are mixtures of active and passive components. The authors examine how activity induces organization in such multi‐component systems. Mixtures of passive colloids and colloidal micromotors are investigated and it is observed that even a small fraction of active particles induces reorganization of the passive components in an intriguing series of phenomena. Experimental observations are combined with large‐scale simulations that explicitly resolve the near‐ and far‐field effects of the hydrodynamic flow and simultaneously accurately treat the fluid–colloid interfaces. It is demonstrated that neither conventional molecular dynamics simulations nor the reduction of hydrodynamic effects to phoretic attractions can explain the observed phenomena, which originate from the flow field that is generated by the active colloids and subsequently modified by the aggregating passive units. These findings not only offer insight into the organization of biological or synthetic active–passive mixtures, but also open avenues to controlling the behavior of passive building blocks by means of small amounts of active particles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An Anthradithiophene Donor Polymer for Organic Solar Cells with a Good Balance between Efficiency and Synthetic Accessibility

Over the past few years, the organic photovoltaics technology (OPV) has reached remarkable power conversion efficiencies (PCEs), mostly thanks to the advent of nonfullerene acceptors as well as to a high level of materials engineering. Yet, the complex materials syntheses behind these results ultimately limit technological readiness. The quest for scalable organic compounds offering high PCE and reasonably low synthetic complexity is a must to close the gap between laboratory R&D and commercial products. The synthesis and full characterization of a new conjugated polymer called PATTD is reported herein, based on a novel anthradithiophene as an electron–rich building block coupled with a commercially available dithienylbenzodithiophenedione as an electron–withdrawing comonomer. Its photovoltaic properties are studied in blends with IT–4F and IDIC as acceptors. PATTD:IT–4F–based photovoltaic devices exhibit a PCE approaching 10% and over 2300 h shelf–life stability. Finally, the PATTD scalability factor (SF), together with the PATTD–based photovoltaic performances, lead to a PCE/SF value equal to 0.297, placing such devices into the innermost circle of OPV materials, achieving one of the best compromises between efficiency and synthetic complexity and at the same time offering promising industrial perspectives.

14 SOLAR ENERGY↗
DOE OSTI2022

Exploring the Role of Organic Functional Groups in the Ionothermal Synthesis of Uranyl Phosphate Materials

Four new hybrid organic-inorganic uranyl phosphate compounds were structurally characterized after single crystals were grown via ionothermal synthesis using the ionic liquids 1-ethyl-3-methylimidazolium dimethyl phosphate and 1-ethyl-3-methylimidazolium dibutyl phosphate. Three of the new crystal structures presented here incorporate dimethyl or monomethyl phosphate ligands into the structural unit to form one chain-based compound and two sheet-based compounds. One of the structures utilizes dibutyl phosphate to form a previously reported uranyl compound, a structural polymorph that crystallized in space group P2 1 /c in contrast to the previously reported P-1 structure. The structural and topological relationships are compared to those of uranyl phosphate minerals as well as previously reported organophosphate compounds. Finally, the roles of the organics on the phosphate anions in impacting uranyl coordination and stabilizing the crystal structures are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Long-term measurements in a mixed-grass prairie reveal a change in soil organic carbon recalcitrance and its environmental sensitivity under warming

Soil respiration, the major pathway for ecosystem carbon (C) loss, has the potential to enter a positive feedback loop with the atmospheric CO2 due to climate warming. For reliable projections of climate-carbon feedbacks, accurate quantification of soil respiration and identification of mechanisms that control its variability are essential. Process-based models simulate soil respiration as functions of belowground C input, organic matter quality, and sensitivity to environmental conditions. However, evaluation and calibration of process-based models against the long-term in situ measurements are rare. Here, we evaluate the performance of the Terrestrial ECOsystem (TECO) model in simulating total and heterotrophic soil respiration measured during a 16-year warming experiment in a mixed-grass prairie; calibrate model parameters against these and other measurements collected during the experiment; and explore whether the mechanisms of C dynamics have changed over the years. Calibrating model parameters against observations of individual years substantially improved model performance in comparison to pre-calibration simulations, explaining 79–86% of variability in observed soil respiration. Interannual variation of the calibrated model parameters indicated increasing recalcitrance of soil C and changing environmental sensitivity of microbes. Overall, we found that (1) soil organic C became more recalcitrant in intact soil compared to root-free soil; (2) warming offset the effects of increasing C recalcitrance in intact soil and changed microbial sensitivity to moisture conditions. Furthermore, these findings indicate that soil respiration may decrease in the future due to C quality, but this decrease may be offset by warming-induced changes in C cycling mechanisms and their responses to moisture conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Reticular exploration of uranium-based metal—organic frameworks with hexacarboxylate building units

We report that the rational reticular design of metal–organic frameworks (MOFs) from building units of known geometries is essential for enriching the diversity of MOF structures. Unexpected and intriguing structures, however, can also arise from subtle changes in the rigidity/length of organic linkers and/or synthetic conditions. Herein, we report three uranium-based MOF structures—i.e., NU-135X (X = 0, 1, 2)—synthesized from trigonal planar uranyl nodes and triptycene-based hexacarboxylate ligands with variable arm lengths. A new chiral 3,6-connected nuc net was observed in NU-1350, while the extended versions of the ligand led to 3-fold catenated MOFs (NU-1351 and NU-1352) with rare 3,6-connected cml-c3 nets. Lastly, the differences in the topology of NU-1350 and NU-1351/NU-1352 could be attributed to the slight distortions of the shorter linker in the former from the ideal trigonal prism geometry to an octahedral geometry when coordinated to the trigonal planar uranyl nodes.

3,6-connected net↗
DOE OSTI2021

Experimental validation of an organic rankine-vapor compression cooling cycle using low GWP refrigerant R1234ze(E)

There is a significant global opportunity to capture and utilize low grade waste heat to reduce fossil fuel consumption, greenhouse gas emissions, and improve energy efficiency across a wide range of industries. In this work, an advanced type of thermally activated cooling system, an organic Rankine-vapor compression cycle (ORVC) with novel heat integration strategies, was designed and tested at a relevant scale for industrial waste heat recovery (300 kW th cooling capacity). The ORVC linked an organic Rankine power cycle and a vapor compression cooling cycle using a turbine and compressor that shared a single shaft. The ORVC test facility absorbed waste heat from a liquid stream at 91 °C to simulate engine coolant in diesel generator sets, rejected heat to a glycol stream at 30 °C, and generated chilled water at 7 °C. A cooling capacity of 264 kW ± 3.5 kW was experimentally validated with a COP of 0.56 ± 0.01 during steady-state operation at the design temperatures. The thermal efficiency, accounting for pump work, of the Rankine cycle was 7.7% ± 0.22% and the COP of the vapor compression cycle was 5.25 ± 0.09. The centrifugal turbo-compressor operated at 31.5 kRPM ± 0.3 kRPM, with a turbine and compressor isentropic efficiencies of 76.7% ± 0.90% and 84.8% ± 0.54%, respectively, with near-perfect power transmission between these components. The pressure drop in the piping and heat exchangers were significantly larger than expected which had a detrimental impact on the performance of the ORVC. In addition, the condenser on the cooling cycle could not deliver the subcooling as specified from the design point modeling. Furthermore, the results from the sensitivity analysis showed that the higher condenser glycol outlet temperature had the largest impact on performance, which is consistent with other analytical models in the literature. When the ORVC simulations were updated with experimental values for isentropic efficiencies of the turbomachinery, the thermal COP was 0.66 which represents an estimate of the predicted performance if test facility limitations are overcome.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Improving air leakage prediction of buildings using the fan pressurization method with the Weighted Line of Organic Correlation

In many countries, the fan pressurization method is the most frequently chosen approach for measuring the air leakage of houses. The measurements are usually performed at pressures that far exceed pressures to which buildings are exposed to under normal conditions. A fit of these tests to the power-law formulation allows an extrapolation to data points outside the measured pressure range. With the Ordinary Least Square (OLS) fitting method, the pressure exponent and flow coefficient can be determined. However, the measurement results are highly sensitive to uncertainties induced by external factors like changing wind conditions during the tests, which is neglected by OLS. This may lead to errors in the prediction of flows at lower pressures. The Weighted Line of Organic Correlation (WLOC) is an alternative approach and takes measurement uncertainty into account. In this paper, a statistical analysis of an extensive data set of pressurization measurements has been performed. Both regression techniques have been compared for almost 7500 fan pressurization measurements of six houses in 109 different house leak configurations. The variability in predicting pressure exponent and flow coefficient for both WLOC and OLS regression was analyzed using probability density functions. It was found that the Weighted Line of Organic Correlation significantly decreases the uncertainty in predicting pressure exponent, flow coefficient, and other low-pressure air leakage metrics compared to the Ordinary Least Square fitting. Here, the authors highly recommend the implementation of WLOC in current measurement standards and test equipment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Elucidating non-radiative decay in near-infrared lumiphores: Leveraging new design principles to develop a telecom band organic dye laser

Organic near-infrared (NIR) lumiphores have been targeted for biological and technological applications; however, these dyes exhibit exponentially decreasing quantum yields with decreasing energy gaps. The accepted model of this phenomenon invokes C–H stretching modes as the dominant route of non-radiative energy dissipation. Reducing the number of these modes is a popular strategy for the design of bright NIR lumiphores, but quantitative experimental validation of this strategy is lacking. Here, we evaluate the role of C–H modes in non-radiative relaxation through isotopic labeling of a NIR-emitting complex. Measurements comparing relaxation between protonated and perdeuterated complexes indicate that C–H modes do not contribute significantly to non-radiative relaxation. We instead propose that skeletal modes may play a larger role and suggest that minimizing scaffold size is a promising route for bright NIR lumiphores. In conclusion, we demonstrate the promise of such strategies through the development of the reddest organic-based laser dye yet reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Production of graphene-derivatives using organic molecules for supercapacitors and beyond

Graphene is rapidly expanding for applications ranging from nanoelectronics to space exploration. A material with such enormous potential requires a variety of synthesis methods. Here, we report a library of relatively sustainable redox-active organic molecules for the reduction of graphene oxide (GO) namely N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD), 7,7,8,8-tetracyanoquinodimethane (TCNQ), ferrocene (Ferro), and decamethylferrocene (DFerro). Among them, the reduction of GO using TMPD starts even with simple hand-shaking for just a few minutes. By controlling the sonication time under ambient conditions, one can control the electronic properties of the reduced graphene oxide (rGO). The resulting free-standing films delivered a capacitance of 185 F/g when tested them as supercapacitor electrodes. We also demonstrated that TMPD can exfoliate graphite into few-layer graphene sheets with simple sonication. Here, we further show that under mild heating, these molecules can serve as dopants during the reduction process to produce nitrogen-doped graphene. Our results may guide researchers to explore sustainable organic molecules for the large-scale production of graphene-based materials for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning bandgap and energy stability of Organic-Inorganic halide perovskites through surface engineering

Organohalide perovskite with a variety of surface structures and morphologies have shown promising potential owing to the choice of the type of heterostructure dependent stability. We systematically investigate and discuss the impact of 2-dimensional molybdenum-disulphide (MoS 2 ), molybdenum-diselenide (MoSe 2 ), tungsten-disulphide (WS 2 ), tungsten-diselenide (WSe 2 ), boron-nitiride (BN) and graphene monolayers on bandgap and energy stability of organic–inorganic halide perovskites. We found that MAPbI 3 deposited on BN-ML shows room temperature stability (-25 meV ~ 300 K) with an optimal bandgap of ~ 1.68 eV. The calculated absorption coefficient also lies in the visible-light range with a maximum of 4.9 × 10 4 cm –1 achieved at 2.8 eV photon energy. Furthermore, on the basis of our calculations, we suggest that the encapsulation of an organic–inorganic halide perovskite monolayers by semiconducting monolayers potentially provides greater flexibility for tuning the energy stability and the bandgap.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Active electrochemical interfaces stabilized through self-organized potential oscillations

Some electrochemical systems are known to have higher average efficiency when operated under an oscillatory regime. Given the compromise between activity and stability, the stability of electrochemical interfaces in a self-organized, oscillatory state must be taken into account. Here we evaluate the electro-oxidation of methanol and formic acid on platinum under regular and oscillatory conditions, and study the stability by following the Pt dissolution rates in situ with a stationary probe rotating disk electrode (SPRDE) coupled to an inductively coupled plasma mass spectrometer (ICP-MS). Generally speaking, as the electro-oxidation reaction proceeds, the platinum dissolution rate increases considerably. To guarantee Pt stability, the potential must be kept below 1.0 V vs. RHE. Interestingly, no dissolution is detectable when the electrode potential undergoes temporary self-organization, ensuring a stable and active interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Deep root activity overprints weathering of petrogenic organic carbon in shale

The oxidation of organic carbon in sedimentary bedrock (petrogenic OC, OC petro ) is increasingly recognized as a potential source of CO 2 to the atmosphere. Recent studies provide evidence for the mobilization and oxidation of OC petro in sedimentary bedrock during rock weathering. However, the mechanisms and rates remain uncertain, particularly where overlying soils and vegetation drive contemporaneous oxidation of recently fixed organic carbon. Here, in this study, we quantify OC petro weathering across a 16 m shale depth profile in a steep, rapidly eroding forested hillslope in the Northern California Coast Ranges. We report solid and gas phase radiocarbon and stable isotope analyses of samples extracted from specialized in-situ samplers, and a supporting laboratory incubation experiment of the shale regolith. OC petro is removed from the weathered bedrock at a rate of approximately 0.12 gC/m 3 yr, which is orders of magnitude lower than the rate of OC petro oxidation we achieved in the laboratory with crushed samples (557.1 gC/m 3 yr). This disparity occurs despite high O 2(g) content across the depth profile, indicating that physical accessibility of OC petro can regulate oxidative weathering. There is no direct radiocarbon evidence of OC petro oxidation in CO 2(g) across the upper 13 m of the weathering profile during both wet and dry seasons. Instead, vadose zone CO 2(g) production at the site is dominated by respiration of recently fixed carbon associated with deep rooting. OC petro is clearly mobilized across the vadose zone during weathering in this rapidly eroding, oxygen-rich, biologically dynamic hillslope, but at rates far below what can be measured given the contribution of root-derived CO 2(g) .

58 GEOSCIENCES↗