Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

High-Efficiency Non-Polar GaN-Based LEDs

Inlustra Technologies with subcontractor U.C. Santa Barbara conducted a project with the principle goal of demonstrating high internal quantum efficiency blue (430 nm) and green (540nm) light emitting diodes (LEDs) on low-defect density non-polar GaN wafers. Inlustra pursued the fabrication of smooth thick a-plane and m-plane GaN films, as well as defect reduction techniques such as lateral epitaxial overgrowth (LEO) to uniformly lower dislocation density in these films. Limited free-standing wafers were produced as well. By the end of the reporting period, Inlustra had met its milestone of dislocation reduction to < 5 x 10{sup 6} cm{sup -2}. Stacking faults were still present in appreciable density ({approx} 1 x 10{sup 5} cm{sup -1}), but were not the primary focus of defect reduction since there have been no published studies establishing their detrimental effects on LED performance. Inlustra's LEO progress built a solid foundation upon which further commercial development of GaN substrates will occur. UCSB encountered multiple delays in its LED growth and fabrication efforts due to unavoidable facilities outages imposed by ongoing construction in an area adjacent to the metalorganic chemical vapor deposition (MOCVD) laboratory. This, combined with the large amount of ab initio optimization required for the MOCVD system used during the project, resulted in unsatisfactory LED progress. Although numerous blue-green photoluminescence results were obtained, only a few LED structures exhibited electroluminescence at appreciable levels. UCSB also conducting extensive modeling (led by Prof. Van de Walle) on the problem of non-radiative Auger recombination in GaN-based LED structures, which has been posited to contribute to LED efficiency 'droop' at elevated current density. Unlike previous modeling efforts, UCSB's approach was truly a first-principles ab initio methodology. Building on solid numerical foundations, the Auger recombination rates of In{sub x}Ga{sub 1-x}N alloys were calculated from first-principles density-functional and many-body-perturbation theory. The differing mechanisms of inter- and intra-band recombination were found to affect different parts of the emission spectrum. In the blue to green spectral region and at room temperature the Auger coefficient was calculated to be as large as 2 x 10{sup -30} cm{sup 6} s{sup -1}; in the infrared it is even larger. These results indicated that Auger recombination may be responsible for the loss of quantum efficiency that affects InGaN-based light emitters, whether on non-polar or polar crystal planes.

36 MATERIALS SCIENCE↗

Advanced Modeling of Cold Crucible Induction Melting for Process Control and Optimization

The Idaho National Laboratory (INL) and the St. Petersburg Electrotechnical University “LETI” (ETU) have collaborated on development and validation of an advanced numerical model of the cold crucible induction melting (CCIM) process. This work was conducted in support of the Department of Energy (DOE) Office of Environmental Management Technology and Engineering (EM-20) International Program. The model predicts quasi-steady state temperature distributions, convection cell configurations, and flow field velocities for a fully established melt of low conductivity non-magnetic materials at high frequency operations. The INL/ETU ANSYS© finite element model is unique in that it has been developed specifically for processing borosilicate glass (BSG) and other glass melts. Specifically, it accounts for the temperature dependency of key material properties, some of which change by orders of magnitude within the temperature ranges experienced (temperature differences of 500oC are common) in CCIM processing of glass, including density, viscosity, thermal conductivity, specific heat, and electrical resistivity. These values, and their responses to temperature changes, are keys to understanding the melt characteristics. Because the model has been validated, it provides the capability to conduct parametric studies to understand operational sensitivities and geometry effects. Additionally, the model can be used to indirectly determine difficult to measure material properties at higher temperatures such as resistivity, thermal conductivity and emissivity. The model can also be used to optimize system design and to predict operational behavior for specific materials and system configurations, allowing automated feedback control. This becomes particularly important when designing melter systems for full-scale industrial applications.

42 ENGINEERING↗

A time-parallel multiple-shooting method for large-scale quantum optimal control

Quantum optimal control plays a crucial role in quantum computing by providing the interface between compiler and hardware. Solving the optimal control problem is particularly challenging for multi-qubit gates, due to the exponential growth in computational complexity with the system's dimensionality and the deterioration of optimization convergence. To ameliorate the computational complexity of time-integration, this paper introduces a multiple-shooting approach in which the time domain is divided into multiple windows and the intermediate states at window boundaries are treated as additional optimization variables. Further, this enables parallel computation of state evolution across time-windows, significantly accelerating objective function and gradient evaluations. Since the initial state matrix in each window is only guaranteed to be unitary upon convergence of the optimization algorithm, the conventional gate trace infidelity is replaced by a generalized infidelity that is convex for non-unitary state matrices. Continuity of the state across window boundaries is enforced by equality constraints. A quadratic penalty optimization method is used to solve the constrained optimal control problem, and an efficient adjoint technique is employed to calculate the gradients in each iteration. We demonstrate the effectiveness of the proposed method through numerical experiments on quantum Fourier transform gates in systems with 2, 3, and 4 qubits, noting a speedup of 80x for evaluating the gradient in the 4-qubit case, highlighting the method's potential for optimizing control pulses in multi-qubit quantum systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advanced Modeling of Cold Crucible Induction Melting for Process Control and Optimization

The Idaho National Laboratory (INL) and the St. Petersburg Electrotechnical University 'LETI' (ETU) have collaborated on development and validation of an advanced numerical model of the cold crucible induction melting (CCIM) process. This work was conducted in support of the Department of Energy (DOE) Office of Environmental Management Technology and Engineering (EM-20) International Program. The model predicts quasi-steady state temperature distributions, convection cell configurations, and flow field velocities for a fully established melt of low conductivity non-magnetic materials at high frequency operations. The INL/ETU ANSYS{sup C} finite element model is unique in that it has been developed specifically for processing borosilicate glass (BSG) and other glass melts. Specifically, it accounts for the temperature dependency of key material properties, some of which change by orders of magnitude within the temperature ranges experienced (temperature differences of 500 deg. C are common) in CCIM processing of glass, including density, viscosity, thermal conductivity, specific heat, and electrical resistivity. These values, and their responses to temperature changes, are keys to understanding the melt characteristics. Because the model has been validated, it provides the capability to conduct parametric studies to understand operational sensitivities and geometry effects. Additionally, the model can be used to indirectly determine difficult to measure material properties at higher temperatures such as resistivity, thermal conductivity and emissivity. The model can also be used to optimize system design and to predict operational behavior for specific materials and system configurations, allowing automated feedback control. This becomes particularly important when designing melter systems for full-scale industrial applications. (authors)

42 ENGINEERING↗

Numerical analysis of air dehumidification through electrospray-enhanced vortical flow cyclone separator

The dehumidification of air is a highly energy-intensive process, typically requiring vapor compression systems to cool the air significantly below its dew point temperature. Here, this study numerically investigates air dehumidification achieved by electrostatic and dielectrophoresis forces in a converging duct and centrifugal principles in cyclone separators. An electrospray was employed to energize water droplets, which then captured water vapor via dielectrophoresis. A novelty of the present study is the inclusion of a cyclone separator positioned downstream of the electrospray. This combination increased the dehumidification efficiency and controlled the flow of the condensate. By integrating electrospray technology and applying an electric field, this study examines the impact of particle separation efficiency, pressure drops, and cyclone performance on air dehumidification. The control parameters for air dehumidification were investigated. Three cyclones were modelled for airflow rates of 5 cubic feet per minute [cfm] (0.0024 m 3 /s), 38 cfm (0.0179 m 3 /s), and 200 cfm (0.094 m 3 /s). The results indicated air dehumidification was up to 5.7 % under environmental conditions, similar to those used to validate the CFD model. The degree of air dehumidification was primarily influenced by the electric charge acquired by the water droplets, their flight trajectory, and the vorticity intensity within the cyclone. Air dehumidification could increase by up to 13 % by increasing the number of droplets injected into the air stream, the flight time, and the electrical charge. The breakdown electric field strength threshold near the electrospray was a limiting factor for further enhancing dehumidification performance. This study examines the optimization of an electro-assisted dehumidification system that includes cyclone-based droplet separation through numerical analysis. The results provide insights into the design of energy-efficient air treatment technologies.

42 ENGINEERING↗

Consistent boundary conditions for PDE filter regularization in topology optimization

Abstract Design variables in density-based topology optimization are typically regularized using filtering techniques. In many cases, such as stress optimization, where details at the boundaries are crucially important, the filtering in the vicinity of the design domain boundary needs special attention. One well-known technique, often referred to as “padding,” is to extend the design domain with extra layers of elements to mitigate artificial boundary effects. We discuss an alternative to the padding procedure in the context of PDE filtering. To motivate this augmented PDE filter, we make use of the potential form of the PDE filter which allows us to add penalty terms with a clear physical interpretation. The major advantages of the proposed augmentation compared with the conventional padding is the simplicity of the implementation and the possibility to tune the boundary properties using a scalar parameter. Analytical results in 1D and numerical results in 2D and 3D confirm the suitability of this approach for large-scale topology optimization.

42 ENGINEERING↗

Pyomo.GDP: an ecosystem for logic based modeling and optimization development

We present three core principles for engineering-oriented integrated modeling and optimization tool sets—intuitive modeling contexts, systematic computer-aided reformulations, and flexible solution strategies—and describe how new developments in Pyomo.GDP for Generalized Disjunctive Programming (GDP) advance this vision. We describe a new logical expression system implementation for Pyomo.GDP allowing for a more intuitive description of logical propositions. The logical expression system supports automated reformulation of these logical constraints to linear constraints. We also describe two new logic-based global optimization solver implementations built on Pyomo.GDP that exploit logical structure to avoid “zero-flow” numerical difficulties that arise in nonlinear network design problems when nodes or streams disappear. These new solvers also demonstrate the capability to link to external libraries for expanded functionality within an integrated implementation. We present these new solvers in the context of a flexible array of solution paths available to GDP models. Finally, we present results on a new library of GDP models demonstrating the value of multiple solution approaches.

42 ENGINEERING↗

A special generalized HSS method for discrete ill-posed problems

In this paper, we use a new special generalized Hermitian and skew-Hermitian splitting (SGHSS) method for solving ill-posed inverse problems. Based on an augmented system formulation, we apply a new splitting for the Hermitian part of the coefficient matrix and discuss on the convergence of this iterative method. Moreover, the optimal parameter minimizing the spectral radius of iteration matrix is derived. Finally, we present some numerical examples to demonstrate the performance of the presented method.

97 MATHEMATICS AND COMPUTING↗

A solution to the static frame validation challenge problem using Bayesian model selection

Within this paper, we provide a solution to the static frame validation challenge problem (see this issue) in a manner that is consistent with the guidelines provided by the Validation Challenge Workshop tasking document. The static frame problem is constructed such that variability in material properties is known to be the only source of uncertainty in the system description, but there is ignorance on the type of model that best describes this variability. Hence both types of uncertainty, aleatoric and epistemic, are present and must be addressed. Our approach is to consider a collection of competing probabilistic models for the material properties, and calibrate these models to the information provided; models of different levels of complexity and numerical efficiency are included in the analysis. A Bayesian formulation is used to select the optimal model from the collection, which is then used for the regulatory assessment. Lastly, bayesian credible intervals are used to provide a measure of confidence to our regulatory assessment.

42 ENGINEERING↗

A self-floating oscillating surge wave energy converter

Here this paper proposes a new conceptual configuration for oscillating surge wave energy converters. The concept is a self-floating device consisting of two vertical flaps with a common hinge and an averaged density equal to that of water. The two flaps will oscillate in opposite directions when driven by incident waves. Kinetic energy will be extracted from the relative speed between the two flaps by a power take-off embedded at the hinge. Numerical studies reveal that the self-floating device has a smaller resonant period and optimal power take-off damping compared with a bottom-hinged floating device of the same overall dimensions. As long as the power take-off damping is appropriately tuned, the opposite-rotation mechanism is valid in both regular and irregular waves, and no matter whether the hinge is fixed or connected with mooring lines. With the self-floating feature and opposite-rotation mechanism, the proposed concept can potentially benefit deep ocean applications by exerting a significantly less reaction loading on mooring lines and eliminating the need for a supporting frame to house the power take-off. The influence of various design parameters such as flap dimensions, submerged depth, incident wave direction, and water depth is also analyzed for a comprehensive evaluation of the proposed concept.

16 TIDAL AND WAVE POWER↗

A robust bi-orthogonal/dynamically-orthogonal method using the covariance pseudo-inverse with application to stochastic flow problems

We develop a new robust methodology for the stochastic Navier–Stokes equations based on the dynamically-orthogonal (DO) and bi-orthogonal (BO) methods . Both approaches are variants of a generalized Karhunen–Loève (KL) expansion in which both the stochastic coefficients and the spatial basis evolve according to system dynamics, hence, capturing the low-dimensional structure of the solution. The DO and BO formulations are mathematically equivalent , but they exhibit computationally complimentary properties. Specifically, the BO formulation may fail due to crossing of the eigenvalues of the covariance matrix, while both BO and DO become unstable when there is a high condition number of the covariance matrix or zero eigenvalues. To this end, we combine the two methods into a robust hybrid framework and in addition we employ a pseudo-inverse technique to invert the covariance matrix. The robustness of the proposed method stems from addressing the following issues in the DO/BO formulation: (i) eigenvalue crossing: we resolve the issue of eigenvalue crossing in the BO formulation by switching to the DO near eigenvalue crossing using the equivalence theorem and switching back to BO when the distance between eigenvalues is larger than a threshold value; (ii) ill-conditioned covariance matrix: we utilize a pseudo-inverse strategy to invert the covariance matrix; (iii) adaptivity: we utilize an adaptive strategy to add/remove modes to resolve the covariance matrix up to a threshold value. In particular, we introduce a soft-threshold criterion to allow the system to adapt to the newly added/removed mode and therefore avoid repetitive and unnecessary mode addition/removal. When the total variance approaches zero, we show that the DO/BO formulation becomes equivalent to the evolution equation of the Optimally Time-Dependent modes . We demonstrate the capability of the proposed methodology with several numerical examples, namely (i) stochastic Burgers equation: we analyze the performance of the method in the presence of eigenvalue crossing and zero eigenvalues; (ii) stochastic Kovasznay flow: we examine the method in the presence of a singular covariance matrix; and (iii) we examine the adaptivity of the method for an incompressible flow over a cylinder where for large stochastic forcing thirteen DO/BO modes are active.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physics constrained learning for data-driven inverse modeling from sparse observations

Deep neural networks (DNN) have been used to model nonlinear relations between physical quantities. Those DNNs are embedded in physical systems described by partial differential equations (PDE) and trained by minimizing a loss function that measures the discrepancy between predictions and observations in some chosen norm. This loss function often includes the PDE constraints as a penalty term when only sparse observations are available. As a result, the PDE is only satisfied approximately by the solution. However, the penalty term typically slows down the convergence of the optimizer for stiff problems. We present a new approach that trains the embedded DNNs while numerically satisfying the PDE constraints. We develop an algorithm that enables differentiating both explicit and implicit numerical solvers in reverse-mode automatic differentiation. This allows the gradients of the DNNs and the PDE solvers to be computed in a unified framework. We demonstrate that our approach enjoys faster convergence and better stability in relatively stiff problems compared to the penalty method. Furthermore, our approach allows for the potential to solve and accelerate a wide range of data-driven inverse modeling, where the physical constraints are described by PDEs and need to be satisfied accurately.

97 MATHEMATICS AND COMPUTING↗

Area-preserving scheme for efficiency enhancement in single-pass tapered free electron lasers

Efficiency enhancement of a single-pass short-wavelength high-gain tapered free electron laser (FEL) has recently been intensively studied. The goal is to sustain the growth of radiation power in the post-saturation regime. Among the various schemes, the undulator tapering is considered an effective route to achieve higher power extraction efficiency. The tapering strategy can be of constant or varying resonant phase along the undulator axis. In this paper we propose an efficiency-enhancement scheme based on preservation of the longitudinal phase space area which ensures trapping of resonant particles in the ponderomotive bucket as long as possible along the undulator axis before significant particle depletion occurs. In the meanwhile such a scheme takes advantage of the increase of the radiation field amplitude to precipitate the particle deceleration process at the middle stage of undulator tapering. We analyze such an area-preserving scheme of undulator tapering by formulating the post-saturation FEL interaction in a one-dimensional (1-D) model via introduction of the particle trapping fraction. The output performance is evaluated through numerical iteration and confirmed with 1-D particle tracking simulations. The results show that the optimal power extraction efficiency based on the proposed scheme, together with a prebunched beam, can be greatly improved within relatively short taper length compared with other schemes before radiation diffraction effect becomes significant. Besides, the undesired sideband effects are found to be effectively suppressed. For the proposed area-preserving taper scheme, we also derive an analytical approximate formula for the resonant phase as a function of undulator axis. In conclusion, we expect that the analysis can shed light on the aim to further enhance the power extraction efficiency in single-pass tapered FELs.

47 OTHER INSTRUMENTATION↗

JetGP: A derivative enhanced Gaussian process library

Derivative enhanced Gaussian Processes (DEGPs) can significantly improve surrogate model accuracy over standard Gaussian Process (GP) formulations by incorporating derivative information. However, standard implementations scale poorly with dimension, limiting their use in high dimensional engineering problems. JetGP is a Python framework that unifies existing derivative enhanced GP methodologies into a single library and extends them to support arbitrary order derivative information. The library implements four complementary formulations: standard derivative enhanced Gaussian Processes (DEGP), directional DEGP (DDEGP), generalized directional DEGP (GDDEGP), and weighted DEGP (WDEGP). By unifying these approaches in a consistent interface with robust numerical implementations, JetGP enables practitioners to balance predictive accuracy and computational efficiency for high dimensional optimization, uncertainty quantification, and sensitivity analysis in engineering design.

Derivative enhanced Gaussian process↗

Coil Array Design Inspired on the Kepler's Lenten Pretzel

The RF coil arrays are an important part in Magnetic Resonance Imaging, since they are the main device for transmission and reception of the magnetic resonance signal. An RF coil array with a new configuration based on the Kepler's Lenten pretzel for the geocentric path of Mars is proposed in this work. The evenly distributed trajectories may serve as the basic configuration to form a coil array to adequately cover a region of interest for magnetic resonance experiments. The main goal is to investigate the electromagnetic properties of this coil array geometry to obtain an optimal design for its further construction. Hence, the electromagnetic properties of the coil array were numerical simulated using the finite element method and the quasi-static approach. Resulting simulations showed that there is an important concentration of magnetic field lines at the centre of the coil array. This is an advantage over other coil arrays where the magnetic field usually decreased at their geometrical centre. Both the electric and magnetic fields had also a very good uniformity. These characteristics made this coil design a good candidate for applications where the use of multi-coil technology is mandatory.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Two-grid Algorithm for Implementation of Fully Conservative Difference Schemes of the Gas Dynamics Equations

This study is proposing a two-grid algorithm for solving a fully conservative difference schemes (FCDS) for gas dynamics equations. In this two-level scheme, the fully nonlinear problem is solved on a coarse grid with space mesh step H. The nonlinearities are expanded about the coarse grid solution and an appropriate interpolation operator is used to provide values of the coarse grid solution on the fine grid. The resulting linear system is solved on a fine mesh with step size h. Applications in the computation of shock and rarefaction waves model problems illustrate the method's effectiveness. It is shown numerically, that the coarse grid can be much coarser than the fine grid and achieve optimal approximation as long as the mesh sizes satisfy H = O({radical}(h))

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large-eddy simulations of Richtmyer Meshkov instability in a converging geometry

The Richtmyer-Meshkov instability (RMI) refers to the baroclinic generation of vorticity at a perturbed density interface when impacted by a shock wave. It is often thought of as the impulsive limit of the Rayleigh-Taylor instability. While the RMI has been widely covered in planar geometries, the present simulations investigate the mixing of materials resulting from the interaction of an imploding cylindrical shock wave with a concentric interface, perturbed in both axial and azimuthal directions, which separates outside air from SF{sub 6} (initially 5 times denser) confined in a 90{sup o} wedge. Two incident shocks of Mach numbers M{sub i} = 1.3 and 2.0 at initial impact are tested. These canonical simulations support recent work on understanding the compressible turbulent mixing in converging geometries relevant to both inertial confinement fusion and core-collapse supernova dynamics. Initial irregularities in the density interface form the misalignment between density and pressure gradients required to initiate a first RMI. A second RMI occurs after the initial shock has converged down the wedge, reflected off the axis and reshocks the distorted interface. Reshock interactions of decreasing intensity follow successively. Due to the converging geometry, the accelerated or decelerated motion of the interface also generates Rayleigh-Taylor instabilities. Secondary Kelvin-Helmholtz instabilities develop along the sides of the interpenetrating fingering structures. The energetic reshock produces a large dynamical range of turbulent scales, requiring the utilization of large-eddy simulation (LES). We employed the stretched-vortex subgrid-scale model of turbulent and scalar transport based on an explicit structural modeling of small-scale dynamics. The imploding nature of the flow is particularly suitable for the use of adaptive mesh refinement (AMR) provided by the parallel block-structured AMR framework AMROC. The Favre-filtered Navier-Stokes equations are solved on each Cartesian uniform subgrid of the mesh hierarchy. A weighted, essentially nonoscillatory scheme is used to capture discontinuities but reverts to a low-numerical dissipation, explicit, tuned center-difference stencil in the smooth or turbulent flow regions, optimal for the functioning of our explicit LES. The computational domain is discretized with 95 x 95 x 64 cubic cells on the base grid (64 points in the periodic axial direction), with three additional levels of refinement based on the local density gradient, reducing the computational expenses compared to the equivalent finest unigrid 760 x 760 x 512 problem. The interpenetration of the two fluids after the reshock is clearly discernible in Fig. 1. The mixing is visualized by using isosurfaces of the heavy-fluid mass fraction {psi}. The mixture is colored red as {psi} = 0.90, yellow as {psi} = 0.5, and green as {psi} = 0.1. To illustrate the multiscale nature of the turbulent mixing, we observe that the initial perturbation wavelength is 100 times larger than the finest grid size, which is itself about 100 times larger than the estimated smallest physical scale in the flow - the Kolmogorov scale - where the viscous dissipation of energy occurs. Incident shocks of higher Mach number (e.g., M{sub i} = 2.0) focus the flow further towards the axis, leading to a stronger turbulent mixing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗