Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MILITARY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Space power tubes - very much alive

The application of the traveling wave tubes (TWT), the backbone of all civilian and military space communication programs, to past, present and future satellites is discussed. Performance characteristics and the trends and challenges in the future are reviewed. Finally, a comparison with Solid State devices, as derived from fundamental laws, is made and limitations discussed.

Kosmahl, H. G.↗

Service life evaluation of rigid explosive transfer lines

This paper describes a joint Army/NASA-sponsored research program on the service life evaluation of rigid explosive transfer lines. These transfer lines are used to initiate emergency crew escape functions on a wide variety of military and NASA aircraft. The purpose of this program was to determine quantitatively the effects of service, age, and degradation on rigid explosive transfer lines to allow responsible, conservative, service life determination. More than 800 transfer lines were removed from the U.S. Army AH-1G and AH-1S, the U.S. Air Force B-1 and F-111, and the U.S. Navy F-14 aircraft for testing. The results indicated that the lines were not adversely affected by age, service, or a repeat of the thermal qualification tests on full-service lines. Extension of the service life of rigid explosive transfer lines should be considered, since considerable cost savings could be realized with no measurable decrease in system reliability.

Bement, L. J.↗

Design Aids for Real-Time Systems (DARTS)

Design-Aids for Real-Time Systems (DARTS) is a tool that assists in defining embedded computer systems through tree structured graphics, military standard documentation support, and various analyses including automated Software Science parameter counting and metrics calculation. These analyses provide both static and dynamic design quality feedback which can potentially aid in producing efficient, high quality software systems.

Szulewski, P. A.↗

Propeller performance and weight predictions appended to the Navy/NASA engine program

The Navy/NASA Engine Performance (NNEP) is a general purpose computer program currently employed by government, industry and university personnel to simulate the thermodynamic cycles of turbine engines. NNEP is a modular program which has the ability to evaluate the performance of an arbitrary engine configuration defined by the user. In 1979, a program to calculate engine weight (WATE-2) was developed by Boeing's Military Division under NASA contract. This program uses a preliminary design approach to determine engine weights and dimensions. Because the thermodynamic and configuration information required by the weight code was available in NNEP, the weight code was appended to NNEP. Due to increased emphasis on fuel economy, a renewed interest has developed in propellers. This report describes the modifications developed by NASA to both NNEP and WATE-2 to determine the performance, weight and dimensions of propellers and the corresponding gearbox. The propeller performance model has three options, two of which are based on propeller map interpolation. Propeller and gearbox weights are obtained from empirical equations which may easily be modified by the user.

Plencner, R. M.↗

Proceedings: Sixth Annual Workshop on Meteorological and Environmental Inputs to Aviation Systems

The proceedings of a workshop on meteorological and environmental inputs to aviation systems held at The University of Tennessee Space Institute, Tullahoma, Tennessee. October 26 - 28, 1982, are reported. The workshop, jointly sponsored by NASA, NOAA, and FAA, brought together many disciplines of the aviation communities in round table discussions. The major objectives of the workshop are to satisfy such needs of the sponsoring agencies as the expansion of our understanding and knowledge of the interaction of the atmosphere with aviation systems, the better definition and implementation of services to operators, and the collection and interpretation of data for establishing operational criteria relating the total meteorological inputs from the atmospheric sciences to the needs of aviation communities. The unique aspects of the workshop were the diversity of the participants and the achievement of communication across the interface of the boundaries between pilots, meteorologists, training personnel, accident investigators, traffic controllers, flight operation personnel from military, civil, general aviation, and commercial interests alike. Representatives were in attendance from government, airlines, private agencies, aircraft manufacturers, Department of Defense, industries, research institutes, and universities.

Walter Frost↗

Contracts, grants and funding summary of supersonic cruise research and variable-cycle engine technology programs, 1972 - 1982

NASA-SCAR (AST) program was initiated in 1972 at the direct request of the Executive Office of the White House and Congress following termination of the U.S. SST program. The purpose of SCR was to conduct a focused research and technology program on those technology programs which contributed to the SST termination and, also, to provide an expanded data base for future civil and military supersonic transport aircraft. Funding for the Supersonic Cruise Research (SCR) Program was initiated in fiscal year 1973 and terminated in fiscal year 1981. The program was implemented through contracts and grants with industry, universities, and by in-house investigations at the NASA/OAST centers. The studies included system studies and five disciplines: propulsion, stratospheric emissions impact, materials and structures, aerodynamic performance, and stability and control. The NASA/Lewis Variable-Cycle Engine (VCE) Component Program was initiated in 1976 to augment the SCR program in the area of propulsion. After about 2 years, the title was changed to VCE Technology program. The total number of contractors and grantees on record at the AST office in 1982 was 101 for SCR and 4 for VCE. This paper presents a compilation of all the contracts and grants as well as the funding summaries for both programs.

Hoffman, S.↗

A rubidium clock for SEEK-TALK

The development of a tactical rubidium frequency standard (TRFS) for the SEEK-TALK program is discussed. This effort, which is entering the prototype stage, is directed toward the establishment of a production capability for miniature rubidium clocks of medium stability capable of fast warmup and extreme ruggedness for military avionics applications. The overall unit consists of an ultraminiature physics package and four plug-in circuit boards inside a 2 1/2-inch square by 4-inch box. This size is achieved without the extensive use of hybrid microcircuitry, yet is believed to be the smallest atomic frequency standard yet developed.

Riley, W. J.↗

High voltage design guide. Volume 4: Aircraft

This report supplies the theoretical background and design techniques needed by an engineer who is designing electrical insulation for high-voltage, high-power components, equipment, and systems for aircraft. A literature survey and abundant bibliography identify references that provide further data on the subjects of partial discharges, corona, field theory and plotting, voids and processes for applying insulation. Both gaseous and solid insulations are treated. Cryogenic and liquid design notes are included. Tests and test equipment for high voltage insulation and equipment are defined. Requirements of test plans and procedures for high-voltage, high-power equipment are identified and illustrated by examples. Suggestions for high-voltage specifications are provided. Very few of the Military and Government specifications deal with system voltages above 10kV, thus most aircraft high-voltage specifications will have to be derived from the power industry specifications and standards produced by ASTM, IEEE, and NEMA.

W G Dunbar↗

Shuttle optical environment; Proceedings of the Meeting, Washington, DC, April 23, 24, 1981

The numerical modeling, instrumentation, identification, and procedures to characterize and/or control contamination hazards to equipment used on the Shuttle are discussed. On-orbit pollutants include molecular offgassing and outgassing, particulate material, and substances from thrusters, vents, and leaks. Clean-rooms are being implemented in ground assembly and integration facilities. Attention is given to an upgraded SPACE program for numerically modeling contamination pathways and appropriate procedures to protect instrumentation from film and particulate deposition. Finally, attention is given to military cryogenic IR detectors being employed to quantify the Shuttle thermal and solid pollutant environment on-orbit as a prelude to future operational IR sensors.

Miller, E. R.↗

An overview of the potential threat as related to missile requirements

Based on unclassified sources, a general review is presented of the perceived U.S.S.R. doctrine, force balances, production ratios, inventory growth, inventory items, and current actions. The extent to which the Soviets appear to be attempting to increase their sphere of influence through economic and political control as well as possible military control of land, sea, air, and space is considered. To offset such possibilities, certain areas of deterrent needs that the Western world might pursue are suggested. Particular emphasis is placed on the role of missiles as part of the deterrent needs.

Spearman, M. L.↗

Coding tradeoffs for improved performance of FH/MFSK systems in partial band noise

Partial band noise jamming can severely degrade the performance of frequency-hopped, M-ary frequency-shift keyed communciation systems. This paper illustrates the tradeoffs between channel coding, diversity, and block orthogonal (MFSK) modulation as a means of overcoming the advantage of worst case, non-adaptive (as opposed to repeat-back) partial band jamming. For ease of computation, the analysis relies on exponentially tight error bounds, and is based on a noncoherent detection metric that requires jamming state information for each hop. A more robust, less complex receiver structure which eliminates the jamming knowledge requirement is shown to degrade performance less than 2-1/2 dB. The coding tradeoffs discussed in this report are exemplified in the design of a hypothetical 32 kb/s military frequency-hopped communication link.

Levitt, B. K.↗

Techniques for low sidelobe, high efficiency offset dual reflector antennas

Antennas with very low sidelobe levels and high aperture efficiencies are employed in satellite communications for both ground and satellite borne systems to reduce microwave interference due to traffic congestion to and from the geostationary satellite orbit. Multiple beam antennas with sidelobes 30 to 40 dB below main beam peaks are required with aperture efficiencies approaching 80%. In the present investigation techniques are presented which make it possible to obtain multibeam patterns with the required characteristics. The considered limited scanned antennas have applications to military and commercial radars as well as to space communications. It is pointed out that offset dual reflector antennas designed according to Japanese tilt criteria offer attractive solutions because optimum aperture distributions can be realized without aperture blocking. Attention is given to ideal aperture distributions, corrugated conical horn design, and subreflector design.

Sletten, C. J.↗

Targeting space station technologies

NASA's Space Station Technology Steering Committee has undertaken the definition of the level of technology that is desirable for use in the initial design and operation of an evolutionary, long service life space station, as well as the longer term technology required for the improvement of capabilities. The technology should initially become available in 1986, in order to support a space station launch as early as 1990. Toward this end, the committee seeks to assess technology forecasts based on existing research and testing capacity, and then plan and monitor a program which will move current technology to the requisite level of sophistication and reliability. The Space Shuttle is assumed to be the vehicle for space station delivery, assembly, and support on a 90-day initial cycle. Space station tasks will be military, commercial, and scientific, including on-orbit satellite servicing.

Olstad, W. B.↗

A perspective of power management for large space platforms

NASA and military applications for high power spacecraft are presently being planned. A perspective of autonomous power management for low earth orbit large space platforms is presented. A multichannel 250 kWe utility-type power subsystem is used as a baseline system. The need for automation is reviewed, based on power subsystem complexity, survivability requirements, and cost benefits. On-board versus ground management is discussed with respect to these needs. In addition, the utilization of autonomous power management to enable technology readiness of large complex power subsystems is described. Recommendations are made for further technology thrusts.

Decker, D. K.↗

Historical review and current plans

A space station concept published in Colliers Magazine in 1952 was the result of a proposal made by a group of visionary scientists and engineers. NASA began studies regarding the concepts and technology needed for a space station in 1959 during its first year of existence. Formative studies regarding the design and the construction of a space station are discussed, taking into account the 1960 space station design of an American aerospace company, the scale model of a hexagonal self-deploying space station, the concept of the Manned Orbiting Research Laboratory (MORL), MORL with Apollo Logistics System, the MORL Brayton Cycle power system, MORL with nuclear power, a manned orbiting telescope, the 1967 Large Space Station concept, the phase B modular space station, the MOSC configuration 1975, a basic manned platform with resupply, and a concept for a space operations center studied in 1979. A Soviet space station program began with Salyut 1 in April 1971. The U.S. Skylab was launched in May 1973. Attention is also given to military stations and current planning.

Hook, W. R.↗

Aeroelastic considerations for continuous patrol/high altitude surveillance platforms

For the last several years, an investigation has been conducted regarding the feasibility of unmanned, airborne, High-Altitude Powered Platforms (HAPP), and High Surveillance Platforms for Over-the-Horizon Targeting (HI-SPOT). These airborne platforms have been proposed as a means of achieving a continuous regional communication-relay or for continuous regional surveillance for use in agricultural research or military applications, i.e., fleet support. These platforms would offer improvements over existing orbiting satellites. These improvements are related to better resolution and increased mission flexibility. The required mission endurance up to six months, would be obtained through the use of either solar power, a cryogenically fueled engine, or microwave-power. Attention is given to airborne platform configuration, structure, structural and aerodynamic modeling, modal analysis, and flutter analysis.

Turner, C. D.↗

Inlet, engine, airframe controls integration development for supercruising aircraft

In connection with a consideration of advanced military aircraft systems, attention is given to research for improving the technology of the design of supersonic cruise aircraft. Syberg et al. (1981) have shown that an analytic design method is now available to accurately predict the flow characteristics of axisymmetric supersonic inlets, including off-design angle of attack operation. On the basis of information regarding the inlet flow characteristics, the control system designer can begin the inlet design and development, before wind tunnel testing has begun. The present investigation is concerned with details and status of inlet control technology. A detailed representation of a supersonic propulsion system is developed. This development demonstrates the feasibility of the selected hybrid computational concept.

Houchard, J. H.↗

Progress in supersonic cruise technology

The Supersonic Cruise Research (SCR) program identified significant improvements in the technology areas of aerodynamics, structures, propulsion, noise reduction, takeoff and landing procedures, and advanced configuration concepts. These improvements, when combined in a large supersonic cruise vehicle, offer a far greater technology advance than generally realized. They offer the promise of an advanced commercial family of aircraft which are environmentally acceptable, have flexible range-payload capability, and are economically viable. These same areas of technology have direct application to smaller advanced military aircraft and to supersonic executive aircraft. Several possible applications will be addressed.

Driver, C.↗