Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERROGATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Experimental Evaluation of the Fast-Neutron Passive Collar (FNPC) Performance (Interim Report)

This report represents a deliverable in the Safeguards Technology WBS # Project Title, 24.1.3.1, Task 3 (Report on laboratory-based performance testing of the FNPC). A new, simplified method for the verification of the 235 U mass in fresh LEU fuel assemblies that is relatively independent of burnable poison content is being developed. LWR fresh fuel is currently verified using the uranium neutron coincidence collar (UNCL), which relies on an AmLi source to induce fission in the 235 U. AmLi neutrons are slowed down in polyethylene, so the induced fission is primarily due to thermal neutrons. Burnable poisons, which are added to nuclear fuel assemblies to extend the lifetime of the fuel, absorb neutrons that would otherwise have induced fission in the fuel, thereby reducing the neutron count rate and thus the measured 235 U mass. To remove this bias factor a correction is applied based on the operator’s declared burnable poison content. The new technique uses 238 U spontaneous fission in LWR fresh fuel rods to self-interrogate the 235 U mass. The 238 U spontaneous fission neutrons have a hard neutron energy spectrum, which means that the technique is less sensitive to burnable poisons than the AmLi based systems. This project has continued the work done over the past two years to study this new technique using the optimized 3 He based fastneutron passive collar (FNPC). Fabrication of the FNPC has been completed and measurements are in progress using the LANL mockup PWR fuel assembly. Also, preliminary evaluations of advanced analysis techniques and unattended mode operation have been performed. In FY18, the 3 He tube based detector was compared with a 10 B sealed cell based detector for the same set of PWR fuel assemblies in the Rodeo-II program. The results were that the optimized 3 He detector had higher efficiency and less weight than the 10 B based system where both systems had about the same cost. Thus, the FY19 work continued exclusively with the 3 He based detector; although, either system had the potential for future applications. However, the high efficiency of the FPNC (~24%) is critical for precise measurements of the triples rate necessary in the multiplicity advanced analysis technique which can solve for the burnable poison content.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electrochemically-Driven Phase Transformations in Battery Compounds (Final Technical Report)

Ion-insertion compounds for advanced batteries frequently exhibit phase transformations as the concentration of the working ion varies. Under the large electrochemical driving forces inherent to practical use, systems are often driven far from equilibrium and exhibit phase transition behavior not seen in other materials. An improved understanding of phase transformation pathways in electrode materials upon cycling will lead to new materials design concepts and electrochemical duty cycle management strategies that improve capacity utilization at high charge/discharge rates, reduce voltage and capacity hysteresis, and extend battery life. The main goal of this project is to develop a predictive understanding of the phase transition behavior of battery compounds when electrochemically driven far from equilibrium through a combined experimental- theoretical approach. Research focuses on elucidating how the phase transition behaviors in a diverse group of selected model systems (olivines, lithium metal, etc.) are regulated by various factors including transformation strains, plasticity, metastable transformation pathways, electrode microstructure, surface reaction and ion diffusion kinetics, and what are the unique features of phase transitions in battery compounds. To this end, operando X-ray-based characterization techniques are applied to interrogate the structure and composition evolution of electrode materials and interfaces at nano- and meso-scales. Mesoscale modeling techniques such as phase-field simulation are employed to shed light on the experimental observations and establish a unified framework for describing phase transition behaviors in battery compounds.

25 ENERGY STORAGE↗

Advancing Pressure Gain Combustion for Terrestrial Turbine Systems

The principal objectives of this project were to demonstrate the operability of a natural gas - air RDE at gas turbine engine cycle conditions. To achieve these goals, our specific tasks were to 1) characterize the dynamic injection and mixing performance of candidate injectors, 2) assess the engine operability via interrogation of spatio-temporal dynamics of combustor inlet and exit flows, 3) measure the engine emissions, and 4) complete an overall assessment of the pressure gain potential of the device. In order to advance RDE technology to the greatest extent possible, the reactants and experimental conditions were chosen to replicate combustor and injector conditions in a terrestrial power generation system. This path was taken because the scaling of combustion devices is, in general, an immature area given the challenges of interrelated mixing and chemical kinetics processes both of which scale with operating conditions.

03 NATURAL GAS↗

Scale Invariance of the Homentropic Inviscid Euler Equations with Application to the Noh Problem

We investigate the inviscid compressible flow (Euler) equations constrained by an ”isentropic” equation of state (EOS), whose functional form in pressure is an arbitrary function of density alone. Under the aforementioned condition, we interrogate using symmetry methods the scale-invariance of the homentropic inviscid Euler equations. We find that under general conditions, we can reduce the inviscid Euler equations into a system of two coupled ordinary differential equations. To exemplify the utility of these results, we formulate two example scale-invariant, self-similar solutions. The first example includes a shock-free expanding bubble scenario, featuring a modified Tait EOS. The second example features the classical Noh problem, coupled to an arbitrary isentropic EOS. In this case, in order to satisfy the conditions set forth in the classical Noh problem, we find that the solution for the flow is given by a transcendental algebraic equation in the shocked density.

97 MATHEMATICS AND COMPUTING↗

Experimental Evaluation of the Fast-Neutron Passive Collar (FNPC) Performance and Comparison with Scintillation Based Collars

This report describes a new method for the verification of fresh low enrichment uranium (LEU) fuel assemblies that can reduce International Atomic Energy Agency (IAEA) inspection time in the field and be completely independent of operator declared burnable poison content. The passive measurement makes unattended mode operation practical, and thus provides the potential for reducing inspector time in the field for future applications. The new simplified passive neutron measurement uses the 238 U spontaneous fission in LEU fresh fuel rods to self-interrogate the 235 U mass in the neighboring rods. The measured response increases linearly with the increase in the linear density (LD) of 235 U. The relatively high efficiency of the passive neutron detector (24%) provides good statistical precision (~ 2%) for the singles, doubles, and triples counting rates in the thermal-neutron mode. The three observables makes possible multiplicity analysis so that both the 235 U LD and the effective burnable poison content can be determined independent of the operator declarations. This closes the potential diversion path of miss-declaration the burnable poison content. This report presents the detector design, the as-built system, the detector parameter measurements, the calibration, and the assay uncertainty estimates. The calibration measurements were performed using the Los Alamos Laboratory mockup PWR fuel assembly. The measurements were made in both the fastneutron mode (with Cd/Gd metal liners) and the thermal-neutron mode (no Cd/Gd liners).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

l3d2vtk: An MCNPTools Utility to Enable LNK3DNT File Visualization & Post-processing [Slides]

This presentation discusses the objective of the project which is to provide a utility (among other utilities) that improves MCNP analysis post-processing and visualization capabilities. Much recent work has been done to improve MCNP post-processing and visualization. It also discusses the goals of the project, which are to create a product that is portable, open, easily interrogated by a user, no dependencies, including a mesh tally-to-VTK conversion, an EEOUT-to-VTK conversion, and an interactive, 3-D, visualization environments (e.g., ParaView). The presentation also discusses the reasons regarding why this is being done, which are to provide physical insight into behaviors and trends, to facilitate error mitigation (easier to “see” errors than “read” them), and to improve communication with collaborators. It also discusses why this is being done now as analyses are getting ever-more complicated and are more flexible in terms of build, test, and deployment capabilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nanostructured Solar Fuel Systems (Final Technical Report)

The focus of our DOE-supported research has been to explore the principles of artificial photosynthesis, working to understand at a fundamental level both the individual components and their interactions in systems. While this work is inspired by biology in terms of design principles for photoinduced charge separation, ion transport, and electrocatalysis, it involves the synthesis, assembly, and study of nanoscale inorganic and polymeric components that are structurally quite different but functionally analogous. The systems we create are constructed from dyes, electron relay molecules, transition metal oxide nanosheets, porous and nanowire semiconductor oxide films, polyelectrolytes, and catalyst molecules. The lessons learned from interrogating the detailed kinetics of these systems are relevant both to light-driven water splitting and CO 2 reduction, and to dark electrochemical energy conversion systems such as electrolyzers and fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extracellular Shed Vesicle Isolation - InnovaPrep ® Concentrating Pipette, Ultracentrifugation, and Systems Biosciences ExoQuick ®

Isolation and purification techniques for functional exosomes are limited, and we see a pressing need for methods optimized for basic science applications. Widely used exosome purification techniques using immunological markers are ill-suited for fundamental exosome research since they inherently select for specific subsets of exosomes, limiting the ability to draw general conclusions and interrogate the full spectrum of exosomes produced by various cells. Additionally, removing attached antibodies is challenging, thus there is need for label free vesicle purification for functional vesicle recovery. Furthermore, high forces generated using ultracentrifugation, the gold standard for exosome concentration, can affect exosome morphology, and is expected to negatively impact exosome function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Final Report for FY15 Spent Fuel Project Task 12: Data Authentication

The data authentication task is concerned with the ability of a user to trust the output from an unattended measurement of spent nuclear fuel intended for disposal. Five high-level requirements that are driven from a data authentication perspective need to be considered for instrument development: The instrument must be secured. All data emerging from the instrument must be signed. Instrument inputs may also need to be signed and authenticated. The instrument environment needs to be controlled. A vulnerability assessment will be necessary for the full system before deployment. Additional requirements may be necessary, especially if operational scenarios include arrangements for joint use. None of the prototype instruments currently under development yet satisfies any of these requirements. From a data authentication perspective, the selection of a preferred instrument from among the candidates under development should consider the relative ability to secure the instrument, its relative needs for ancillary instrumentation, and ability of the instrument to self-interrogate its state of health. Further work is recommended to develop advanced technologies, methods and approaches for tamper indication. Beyond the development of any particular instrument for the nondestructive assay of spent fuel, efforts should be devoted to developing the system for spent fuel verification prior to long term disposal, including likely operational scenarios for routine use of the verification system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Strain Improvements that Keep Algae Ponds Growing Strong

A challenge for algal biofuel development is finding strains of algae best suited for producing copious amounts of oil quickly and under industrial-scale conditions. Furthermore, maintaining pond health is also challenging—deteriorating health in a small fraction of algal cells within a pond can quickly lead to the death of the entire pond’s population. To overcome these challenges, Los Alamos National Laboratory (LANL) scientist Christina Steadman and team designed a process to optimize algal physiology and metabolism in cultures by interrogating specific characteristics of the algae cells. This process uses flow cytometry methods and solves two problems: the LANL team can quickly detect potential pond problems, and use this process to streamline the screening of potential algae candidates for biofuel production.

59 BASIC BIOLOGICAL SCIENCES↗

Holographic Lithography for Industrial Nanomanufacturing

The participant constructed interference lithography experiments on their prototype of a coordinated holographic industrial-scale electromagnetic lithography (CHISEL) tool. These experiments involved generating several laser beams and interfering them in photosensitive materials, whereupon subsequent development resulted in micro- and nano-structured samples. We characterized these samples using scanning electron microscopy and various optical interrogation methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation and Demonstration of Intrusion Detection for Spent Fuel Storage Facilities

The IAEA recommends dual containment and surveillance (C/S) systems for difficult to access or difficult to measure spent fuel storage areas. However, many storage areas have limitations that prevent traditional secondary C/S systems, such as radiation levels too high for inspectors to apply individual Tamper Indicating Devices (TID) or have physical impedances to the use of TIDs. Recent developments in C/S technology include Laser Curtain for Containment (LCCT) technology implemented at Atucha-1 power plant in Argentina. The LCCT is a new approach to perimeter-wide C/S and the IAEA has granted provisional approval for its use as one of two required C/S systems. This proposal focuses on investigating and testing new and evolving completely passive (or ultra-low power) tamper indicating systems that will provide backup C/S to the LCCT even during power outages. An investigation of Commercial Off The Shelf (COTS) technology will be conducted to identify readily available options. Optically Stimulated Luminescence (OSL) fibers will also be investigated. OSL fibers are a passive technology that can measure radiation dose by knocking an electron into a metastable state where it remains until the fiber is interrogated with light. The goal of this project would be to investigate COTS technologies that can be used in low or no power scenarios for radiation detection as well as test and evaluate OSL technology, which can operate passively in no power scenarios. Limitations for each technology will be determined and documented in an effort to determine the best technology for spent fuel storage monitoring.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Revolutionizing Turbine Cooling with Micro-Architectures Enabled by Direct Metal Laser Sintering

The objective of this research effort was to explore innovative cooling architectures enabled by additive manufacturing techniques for improved turbine cooling performance. The ability to create complex internal geometries was leveraged to better distribute coolant as well as to integrate inherently unstable flow devices to enhance internal and external heat transfer. This was accomplished with a multi-faceted approach including analytical, experimental, and computational components. This final report documents progress during the total 4.25 year effort that was extended (at no additional cost) from the original 3-year cooperative agreement. Prior to starting the project, significant effort was invested in investigating innovative cooling designs from the open literature. When the project started, we quickly down-selected to 4 configurations: impingement jet fluidic oscillators (for internal leading edge cooling), reverse film cooling (for pressure surface), sweeping film cooling jets (for suction surface), and trailing edge slot cooling with microchannels. During the 2nd year, the reverse film cooling design was shown to be sub-optimal and work on that topic was halted. The three remaining technologies were integrated into a large scale nozzle guide vane and installed into a low-speed linear cascade facility for further interrogation. Initial results showed the sweeping film cooling jets (on the suction surface) to be the most promising technology compared to a baseline diffusion shaped film hole (777 design). The benefit was particularly evident at high blowing ratios (>1.5) when the 777 coolant film separated from the downstream surface. Benefits were also evident at elevated freestream turbulence levels. The leading edge cooling with unsteady jets was less effective in terms of peak or average cooling – however it was superior to round hole impingement cooling in terms of spatial uniformity. Finally, the trailing edge cooling design with micro-channels was scrapped in favor of a pinned arrangement with centerbody. During the 3rd year, the same three technologies were integrated into a transonic linear cascade for an assessment of compressibility effects. Again, the sweeping film cooling jets proved superior at high blowing ratios while the unsteady leading edge impingement and trailing edge pin-fins with centerbody designs yielded mixed results. Finally, during the 4th and final year, these 3 technologies were integrated into a direct metal laser sintered (DMLS) nozzle guide vane for testing in a high temperature, transonic annular vane cascade. The facility matches the flow temperature, Mach number, and coolant pressure ratios of an actual gas turbine. Before doing this, an additional series of tests were completed to validate a redesigned trailing edge cooling architecture. This final design included a centerbody with triangular pins between the centerbody and the vane external skin. The majority of these triangular pins are fabricated with a 30% gap to the centerbody – reducing their pressure drop considerably while still providing excellent heat transfer augmentation. This additional test campaign required an additional 3-month extension request to complete testing in the high temperature NGV test facility (Turbine Reacting Flow Rig – TuRFR). Testing of the DMLS vane in TuRFR pitted the 3 innovative cooling technologies against more traditional technologies (shaped 777 film hole, round impingement jet, and full pin arrangement in the trailing edge. The sweeping film cooling jets (on the suction surface) showed approximately 15% improvement in overall effectiveness compared to the 777 film hole while the trailing edge showed up to 20% improvement. The leading edge impingement was disappointing with a substantially lower effectiveness than traditional direct impingement. In summary, the study was successful in demonstrating that DMLS-enabled cooling technologies can yield significant gains in cooling performance.

03 NATURAL GAS↗

Integrated Harsh Environment Gas / Temperature Wireless Microwave Acoustic Sensor System for Fossil Energy Applications

There is a significant need for sensors capable of detecting gases, such as H 2 , O 2 , NO x , SO x within harsh environments encountered in power plants, industrial manufacturing, oil and gas exploration, and aerospace applications. This project successfully demonstrated the use of wireless microwave acoustic sensor technology for the detection of gases (H 2 or O 2 ) from ambient temperatures up to 650°C. The work focused on langasite (LGS) based surface acoustic wave resonator (SAWR) sensors as the harsh-environment sensor platform and explored multiple combinations of high-temperature thin films and device structures which were used to increase the sensor platform stability and detection capability at temperatures in the operational range of 150°C to 700°C. Specific material configurations that were investigated include: yttria-stabilized-zirconia (YSZ) decorated with Pt nanoparticles, atomic layer deposited (ALD) Al 2 O 3 , palladium, and Pt/Al 2 O 3 co-deposited electrode alloys. Through the deposition of YSZ at temperatures as high as 850°C and the use of graded alloy concentrations of Pt in the fabrication of the Pt/Al 2 O 3 electrode structures, film stress problems were mitigated, and sensor operation and stability achieved. To test and evaluate SAWR sensor performance for the detection of H 2 and O 2 under the influence of temperature variations, a comprehensive gas sensor control system and test apparatus was created to operate within a laboratory box furnace-controlled environment. In addition to the advancement in thin film materials through the deposition and fabrication techniques mentioned above, the work characterized the performance of sensors containing these films in the presence of oxidizing and reducing gases between 25°C and 700°C. In particular, the work revealed that the exposure of the SAWR sensor surfaces to oxidizing environments significantly improve the sensor response to H 2 , whereas the exposure of the sensor to reducing environments at high temperatures (≈ 500°C) renders the sensor irresponsive to H 2 , requiring sensor surface treatment at high temperatures (above 500°C) to recover the responsiveness to H 2 . The SAWR sensors have been also tested for wireless operation and array operation using multiple orientations to resolve the detection of gases under temperature variations. The work developed at the University of Maine was aided by a collaboration with the NETL Research and Innovation Center, Pittsburgh, PA, where thin film materials and device structures fabricated at UMaine were tested and characterized using NETL gas reactors and surface analysis techniques. SAWR sensors fabricated at UMaine were exposed multiple times to temperatures up to 700°C and H 2 concentrations up to 100% in the NETL facilities to measure the sensor performance. Environetix Technologies Corporation, a UMaine harsh-environment sensor spin-off company, also provided support and assistance in sensor system testing and implementation. The sensor small size and configuration allows flexible sensor placement and embedding of multiple sensor arrays into a variety of components within power systems and other aerospace or industrial settings that need to be interrogated wirelessly. The SAW platform is an attractive option for high-temperature harsh-environment gas sensing applications due to its inherent features, namely small size, capability of battery-free and wireless operation, and cost effective scale production using well-established production techniques from the semiconductor industry. The research findings achieved in this work, particularly advances regarding the fabrication and performance of the SAWR gas sensor platform, can be adapted and transferred to industrial power plants and other harsh environments.

01 COAL, LIGNITE, AND PEAT↗

Study of Poly(ether ketone ketone) (PEKK): Outgassing Characteristics and Likely Residual Synthesis Impurities

In May-June, 2020, a study was conducted to characterize the outgassing properties of a series PEKK (Poly(ether ketone ketone)) samples using cryo-GC/MS headspace analysis. Three sets of samples were interrogated: sample group 1 consisted of 2 additively manufactured PEKK samples (PEKK "ole and "New") prepared by KCNSC from powder material from Solvay Specialty Polymers USA, LLC. Sample groups 2 and 3 consist of 5 PEKK powder types (used as feedstock for additive manufacturing processes) and 4 additively-manufactured PEKK material lots, respectively. Contrary to expectations, all samples of PEKK material were observed to outgas sulfur-containing compounds. Other analyses (EDS/EMA, GC-TOF/MS of PEKK sample extractions) confirmed the presence of sulfur in the PEKK bulk material. Specifically, Diphenyl sulfone (used as a reagent or high-temperature solvent in the synthesis of Polyaryletherketone or PAEK polymers) was observed in three of the powders and in both the PEKK "Old" and "New" samples, suggesting that the source of the sulfur can be traced to impurities in the material left over from the synthesis process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application and Certification of Comparative Vacuum Monitoring Sensors for Structural Health Monitoring of 737 Wing Box Fittings

Multi-site fatigue damage, hidden cracks in hard-to-reach locations, disbonded joints, erosion, impact, and corrosion are among the major flaws encountered in today's extensive fleet of aging aircraft and space vehicles. The use of in-situ sensors for real-time health monitoring of aircraft structures are a viable option to overcome inspection impediments stemming from accessibility limitations, complex geometries, and the location and depth of hidden damage. Reliable, structural health monitoring systems can automatically process data, assess structural condition, and signal the need for human intervention. Prevention of unexpected flaw growth and structural failure can be improved if on-board health monitoring systems are used to continuously assess structural integrity. Such systems are able to detect incipient damage before catastrophic failures occurs. Condition-based maintenance practices could be substituted for the current time-based maintenance approach. Other advantages of on-board distributed sensor systems are that they can eliminate costly, and potentially damaging, disassembly, improve sensitivity by producing optimum placement of sensors and decrease maintenance costs by eliminating more time- consuming manual inspections. This report presents a Sandia Labs-aviation industry effort to move SHM into routine use for aircraft maintenance. This program addressed formal SHM technology validation and certification issues so that the full spectrum of concerns, including design, deployment, performance and certification were appropriately considered. The Airworthiness Assurance NDI Validation Center (AANC) at Sandia Labs, in conjunction with Boeing, Delta Air Lines, Structural Monitoring Systems Ltd., Anodyne Electronics Manufacturing Corp. and the Federal Aviation Administration (FAA) carried out a certification program to formally introduce Comparative Vacuum Monitoring (CVM) as a structural health monitoring solution to a specific aircraft wing box application. Validation tasks were designed to address the SHM equipment, the health monitoring task, the resolution required, the sensor interrogation procedures, the conditions under which the monitoring will occur, the potential inspector population, adoption of CVM into an airline maintenance program and the document revisions necessary to allow for routine use of CVM as an alternate means of performing periodic structural inspects. To carry out the validation process, knowledge of aircraft maintenance practices was coupled with an unbiased, independent evaluation. Sandia Labs designed, implemented, and analyzed the results from a focused and statistically-relevant experimental effort to quantify the reliability of the CVM system applied to the Boeing 737 Wing Box fitting application. All factors that affect SHM sensitivity were included in this program: flaw size, shape, orientation and location relative to the sensors, as well as operational and environmental variables. Statistical methods were applied to performance data to derive Probability of Detection (POD) values for CVM sensors in a manner that agrees with current nondestructive inspection (NDI) validation requirements and also is acceptable to both the aviation industry and regulatory bodies. This report presents the use of several different statistical methods, some of them adapted from NDI performance assessments and some proposed to address the unique nature of damage detection via SHM systems, and discusses how they can converge to produce a confident quantification of SHM performance An important element in developing SHM validation processes is a clear understanding of the regulatory measures needed to adopt SHM solutions along with the knowledge of the structural and maintenance characteristics that may impact the operational performance of an SHM system. This report describes the major elements of an SHM validation approach and differentiates the SHM elements from those found in NDI validation. The activities conducted in this program demonstrated the feasibility of routine SHM usage in general and CVM in particular for the application selected. They also helped establish an optimum OEM-airline-regulator process and determined how to safely adopt SHM solutions. This formal SHM validation will allow aircraft manufacturers and airlines to confidently make informed decisions about the proper utilization of CVM technology. It will also streamline the regulatory actions and formal certification measures needed to assure the safe application of SHM solutions.

42 ENGINEERING↗

Process Image Analysis using Big Data, Machine Learning, and Computer Vision

The development of algorithms for machine learning and data analysis for the 3013 MIS corrosion surveillance program is a collaborative effort by SRNL, USC and GT. For corrosion detection, LCM image data is extracted from large binary files, with software written to convert the data to physical attributes (i.e. height, color and grayscale values; all as functions of a location in a plane projection). The user interface for the software permits selective downloading of binary data and interrogation of attributes. User input thresholds are used to flag attributes of interest. Machine learning algorithms, developed for this application, are used to determine whether the features are the result of corrosion. To address the fundamental mechanisms of corrosion, machine learning algorithms are being developed to derive interatomic potential force-fields from ab-initio DFT calculations. The goal is to apply molecular modeling on a large enough scale to guide the design of resistant materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Isomer-specific spectroscopy of aromatics and their resonance-stabilized radical intermediates

There are many circumstances in which complex gas-phase reaction mixtures must be interrogated and understood, including combustion, plasmas, atmospheres, and molecular clouds. Spectroscopic tools are essential to selective detection and characterization of the widening array of precursors and the reactive intermediates they generate. This research program has focused on the development and implementation of sensitive spectroscopic detection schemes that are isomer-specific and even conformation-specific. In particular, we used an array of laser-based and broadband microwave methods to carry out isomer-specific and conformation-specific spectroscopy on large flexible molecules and reactive intermediates formed by photolysis, pyrolysis, combustion, or electron-driven chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗