Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERCHANGEABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Hinode and SDO Observations of a Two-Sided-Loop Coronal Jet: Toward a General Picture for Jets

Most of the commonly discussed solar coronal jets are of the type consisting of a single spire extending approximately vertically from near the solar surface into the corona. Recent research of a substantial number of events shows that eruption of a miniature filament (minifilament) drives at least many such single-spire jets, and concurrently generates a miniflare at the eruption site. A different type of coronal jet, identified in X-ray images during the Yohkoh era, are two-sided-loop jets, which extend from a central excitation location in opposite directions, along two opposite low-lying coronal loops that are more-or-less horizontal to the surface. We observe such a two-sided-loop jet from the edge of active region (AR) 12473, using data from Hinode XRT and EIS, and SDO AIA and HMI. Similar to single-spire jets, this two-sided-loop jet results from eruption of a minifilament, which accelerates to over 140 km/s before abruptly stopping upon striking overlying nearly horizontal magnetic field at ∼30,000 km altitude and producing the two-sided-loop jet via interchange reconnection. Analysis of EIS raster scans show that a hot brightening, consistent with a small flare, develops in the aftermath of the eruption, and that Doppler motions (∼40 km/s) occur near the jet-formation region. As with many single-spire jets, the trigger of the eruption here is apparently magnetic flux cancelation, which occurs at a rate of ∼4×10^18 Mx/hr, comparable to the rate observed in some single-spire AR jets. This example of a two-sided jet, along with numerous examples of single-spire jets, supports that essentially all coronal jets result from eruptions of minifilaments, and frequently the eruption of the minifilament is triggered by magnetic flux cancelation. This work was supported by the NASA HGI program, and the MSFC Hinode project. (Details are in Sterling et al. 2019, ApJ, 871, 220.)

Sterling, Alphonse C.↗

The Magnetosphere Ionosphere Electron Precipitation Dynamics and Their Geospace Consequences During the 17 March 2013 Storm

During geomagnetic storms and substorms, the magnetosphere and ionosphere are strongly coupled by precipitating magnetospheric electrons from the Earth's plasma sheet and driven by both magnetospheric and ionospheric processes. Magnetospheric wave activity initiates electron precipitation, and the ionosphere and upper atmosphere further facilitate this process by enhancing the value of precipitated energy uxes via connection of two magnetically conjugate regions and multiple atmospheric reections. This paper focuses on the resulting electron energy uxes and afliated heightintegrated Pedersen and Hall conductances in the auroral regions produced by multiple atmospheric reections during the 17 March 2013 geomagnetic storm and their effects on the inner magnetospheric electric eld and ring current. Our study is based on the magnetically and electrically selfconsistent Rice ConvectionModelEquilibrium of the inner magnetosphere with SuperThermal Electron Transport modied electron energy uxes that take into account the electron energy interplay between the two magnetically conjugate ionospheres. SuperThermal Electron Transportmodied energy ux in the Rice ConvectionModelEquilibrium leads to a signicant difference in the global conductance pattern, ionospheric electric eld formation, Birkeland current structure, ring current energization and its energy content, subauroral polarization drifts intensications and their spatial locations, interchange instability redistribution, and overall energy interplay on the global scale.

Khazanov, George V.↗

Overview of the PLEXIL Plan Execution Technology and its Applications in Autonomous Piloting Projects at NASA

Automated planning is a key Artificial Intelligence technology enabling Unmanned Aerial Systems (UAS) and the eminent reality of Urban Air Mobility (UAM). It produces plans, which formalize procedures often performed by humans. Plans differ from other kinds of computer programs in their ability to react and interact with a dynamically changing environment. Aviation plans must encode the procedural knowledge, reasoning capability, and capacity for multi-tasking held by competent human pilots. Correct execution of these plans (performed by software called an executive) in the dynamic airspace environment is vital to the success of each automated flight, and the safety of the vehicle and all things in its path. In the early 2000s NASA developed a plan representation language and executive called PLEXIL (Plan Execution Interchange Language) that has successfully been applied in several NASA aviation and UAS projects. Autonomy Operating System (AOS), Cockpit Hierarchical Automated Planning and Execution (CHAP-E), and ICAROUS are all projects that have used PLEXIL to help encode and automatically execute flight procedures, some normally performed by human pilots. AOS also automates a subset of pilot/Air Traffic Control communication towards enabling UAS entry into the National Airspace. PLEXIL has been open-source software since 2008 and has seen usage in a wide range of prototypical autonomy applications in academia, government, and industry. In this presentation, we describe PLEXIL and highlight its significant accomplishments in the aviation domain.

Dalal, Michael↗

Transitioning the NASA SLR Network to Event Timing Mode for Reduced Systematics, Improved Stability and Data Precision

NASA's legacy Satellite Laser Ranging (SLR) network produces about one-third of the global SLR data to support spacegeodesy. This network of globally distributed stations has been using Time Interval Units (TIU) for range measurements for thelast 25 + years. To improve the reliability of the SLR network and satisfy the need for stable millimeter precision data, a phasedreplacement of the TIUs in the network with picosecond-precise Event Timer Modules was initiated in 2015. This schemeallowed the time of flight and laser transmit epoch measurement to one picosecond resolution. For a network with globalscientific impact, transitioning to a new data generation metrological scheme requires significant data scrutiny and long-termscience data validation. Any long-term testing/measurement has the potential to interrupt the station's daily operational dataflow to the International Laser Ranging Service (ILRS) as the station under test will have to put its test data into quarantine.We have demonstrated a very effective way to test and implement the new device without removing the old hardware andwithout the need for the orbit analysis. This operationally noninvasive scheme performed concurrent test measurements enablinguninterrupted operational data flow to the users, while allowing simultaneous test data capture for short- and long-termsystematics and stability analysis. Extensive analysis of the test data was performed by the NASA SLR engineering team andthe ILRS Analysis Standing Committee, to uncover biases and any dependencies on the satellite ranges (for nonlinear scaleissues). Multi-ETM comparison was also performed at two of the SLR stations through the interchange of hardware to establishthe inter-device range biases and stability. Such benchmarked hardware was subsequently sent to the remaining stationsto allow traceability and normalize the network performance. The range bias intercomparison performed using the multiyearSLR data analysis agreed well with the engineering changes, thus validating the approach to flush out station-specific rangingsystematics affecting precise orbit determination. Such an improvement and rebalancing of the current network will allowan orderly transition of the current NASA SLR network operating at a maximum rate of 10 Hz to the NASA next generationSpace Geodesy Satellite Laser Ranging (SGSLR) network operating at 2 kHz (McGarry et al. in J Geod, 2018. https ://doi.org/10.1007/s0019 0-018-1191-6; Merkowitz et al. in J Geod, 2018. https ://doi.org/10.1007/s0019 0-018-1204-5).

Varghese, Thomas↗

Flow Boiling and Condensation Experiment Flight Hardware Development

The Flow Boiling and Condensation Experiment (FBCE) to be manifested on the International Space Station (ISS) consists of a fluid system and the associated electronics to provide for conditioning the test fluid (normal-PerFluorohexane or nPFH-C6F14) to the proper thermodynamic state prior to entering a test module, which can be interchangeable based on the science objectives. Two separate test modules have been manufactured for the FBCE, the Flow Boiling Module (FBM), which investigates flow boiling for a subcooled liquid, saturated liquid, or two phase mixture, and the Condensation Module Heat Transfer (CM-HT), which investigates condensation of a flowing saturated or superheated vapor. The test fluid heating is accomplished using the Bulk Heater Module (BHM), which heats the fluid to various states based on the demands of the currently installed test module. ISS Internal Thermal Control System (ITCS) water is utilized to cool the test fluid prior to entering the circulation pump, and is also utilized for cooling for condensation in CM-HT, for cooling of a camera in FBM. An adjustable pressure bellows-type accumulator is used to set the pressure at the inlet of the test section, but does not provide active pressure control during testing. The flow of the test fluid is achieved using a gear pump controlled by a coriolis flow meter, which also provides the flow rate measurement. Flow rates for the ITCS water loops are measured and controlled using coriolis flow meters with directly controlled proportional valves. During execution of FBCE operations, the FBM is scheduled to collect data for three months before being exchanged with CM-HT for another three month data collection run. In this work, we present the development of the flight hardware, the associated challenges experienced during the development such as packaging flight system hardware, and the lessons learned in overcoming the encountered challenges.

Guzik, Monica C.↗

A Two-sided-Loop X-Ray Solar Coronal Jet and a Sudden Photospheric Magnetic-field Change, Both Driven by a Minifilament Eruption

Most of the commonly discussed solar coronal jets are of the type consisting of a single spire extending approximately vertically from near the solar surface into the corona. Recent research of a substantial number of events shows that eruption of a miniature filament (minifilament) drives at least many such single-spire jets, and concurrently generates a miniflare at the eruption site. A different type of coronal jet, identified in X-ray images during the Yohkoh era, are two-sided-loop jets, which extend from a central excitation location in opposite directions, along two opposite low-lying coronal loops that are more-or-less horizontal to the surface. We observe such a two-sided-loop jet from the edge of active region (AR) 12473, using data from Hinode XRT and EIS, and SDO AIA and HMI. Similar to single-spire jets, this two-sided-loop jet results from eruption of a minifilament, which accelerates to over 140 km/s before abruptly stopping upon striking overlying nearlyhorizontal magnetic field at ∼30,000 km altitude and producing the two-sided-loop jet via interchange reconnection. Analysis of EIS raster scans show that a hot brightening, consistent with a small flare, develops in the aftermath of the eruption, and that Doppler motions (∼40 km/s) occur near the jet-formation region. As with many single-spire jets, the trigger of the eruption here is apparently magnetic flux cancelation, which occurs at a rate of ∼4×10^18 Mx/hr, comparable to the rate observed in some single-spire AR jets. This example of a two-sided jet, along with numerous examples of single-spire jets, supports that essentially all coronal jets result from eruptions of minifiaments, and frequently the eruption of the minifilment is triggered by magnetic flux cancelation. (Details are in Sterling et al. 2019, ApJ, 871, 220.)

Sterling, Alphonse C.↗

U.S. Coast Guard Boat Recovery Simulation at the NASA Ames Vertical Motion Simulator

The U.S. Coast Guard routinely uses the Over-The-Horizon (OTH-IV), a cutter deployed, rigid-hulled inflatable boat for rescue and law enforcement operations. The term "cutter" refers to a Coast Guard vessel 65 feet in length or greater with accommodations for crew to live aboard and the ability to deploy smaller boats including the OTH-IV. A deployment method employed by some cutter class vessels is a davit crane system and specialized hook mechanism to connect the smaller boat. The launch and recovery operation requires several crewmembers, where one is tasked with releasing and connecting the hook to the small boat. Manipulating the hook can pose a risk to the crewmember depending on sea conditions combined with fatigue level or task expertise. Equipment and crewmembers are tested extensively due to the inherent risk of the task, but the sea conditions cannot be controlled. To address the sea condition variable, the U.S. Coast Guard and NASA leveraged the Vertical Motion Simulator (VMS) as a platform to test new equipment or train crewmembers in varying sea conditions. With 6 degrees of freedom and a vertical displacement of +/- 22ft, the VMS is capable of simulating conditions up to sea-state 5. The proof of concept experiment took place in September 2018 and demonstrated that the VMS can accurately simulate varying sea-states, collect performance data, and design a reliable and safe system for participants. The U.S. Coast Guard provided boat displacement data from the Large Amplitude Motion Program (LAMP). The program generates multi-directional waves with a cosine squared spreading function which produced a time history response of displacement data (surge, sway, heave, roll, pitch, yaw) of the OTH-IV's center of gravity (C.G). The displacement data was differentiated into acceleration evaluated at the crewmember's position at the front (bow) of the boat. Those accelerations were transformed to the VMS coordinate system and used as command inputs to the motion system's washout filters. The VMS uses Interchangeable Cabs (ICab) to perform flight simulations on a variety of aircraft or spacecraft configurations. An ICab typically contains seats, restraints, pilot controls, instrument panel, and out-the-window projectors all enclosed in a familiar cockpit configuration. To replicate the launch and recovery of a small boat, all the conventional features of a flight simulator and canopy were removed to be replaced with a to-scale OTH-IV bow mockup. The bow section was constructed from aluminum, and a connection point known as the davit ring. Additionally, a hook replica was suspended by a cable from the ceiling as if it were hanging from a davit crane aboard a cutter vessel. The last step was providing an auxiliary control to close the distance between suspended hook and the davit ring on the bow mockup. Without control the boat would simulate the wave motion, but with no guarantee that the crewmember will be in reach of the hook. Since the wave motion was repeatable, an additional acceleration command sent to the washout filters to move the simulator in the surge, sway, and heave directions, independently. The commands were rate limited such that the additional movement was not detectable with respect to the wave motion. The results showed that for each wave profile, a unique set of acceleration commands provided opportunities for crewmembers to gain control of the hook and connect it to the davit ring.

Riccobono, Nicholas S.↗

Escape of Flare-Accelerated Particles in Solar Eruptive Events

Impulsive solar energetic particle events are widely believed to be due to the prompt escape into the interplanetary medium of flare-accelerated particles produced by solar eruptive events. According to the standard model for such events, however, particles accelerated by the flare reconnection should remain trapped in the flux rope comprising the coronal mass ejection. The particles should reach the Earth only much later, along with the bulk ejecta. To resolve this paradox, we have extended our previous axisymmetric model for the escape of flare-accelerated particles to fully three-dimentional (3D) geometries. We report the results of magnetohydrodynamic simluations of a coronal system that consists of a bipolar active region embedded in a background global dipole field structured by solar wind. our simulations show that multiple magnetic reconnection episodes occur prior to and during the coronal mass ejection 9CME) eruption and its interplanetary propagation. In addition to the episodes that build up the flux rope, reconnection between the open field and the CME couples the closed coronal to the open interplanetary field. Flare-accelerated particles initially trapped in the CME thereby gain access to the open interplanetary field along a trail blazed by magnetic reconnection. A key difference between these 3D results and our previous calculations is that the interchange reconnection allows accelerated particles to escape from deep within the CME flux rope. We estimate the spatial extent of the particle-escape channels. The relative timings between flare acceleration and release of the energetic particles through CME/open-field coupling are also determined. All our results compare favorably with observations.

Masson, S.↗

TPSAS-NF1676L-35654-DND

This is a presentation to be given at an internal NATO/NASA interchange meeting to be held at NASA Langley on 6 February 2020. The presentation describes an upstart NATO activity where NASA Langley is a participating panel member.

William M Humphreys, Jr↗

TPSAS-NF1676L-13643-DND

This briefing provides an overview recent NASA activities in the development of deployable space structures technology. NASA?s interest in innovative technologies that support human and robotic exploration are discussed followed by an emphasis on expandable structures technology. Recent work in inflatable habitats and large deployable solar arrays to support solar electric propulsion are discussed. Joint efforts by NASA and DLR in the application of additive manufacturing to augment the damage tolerance of thin film space systems such as solar sails are also described. Through this briefing and future interchanges we wish to maintain a dialogue with our international colleagues to advance expandable structures technology.

W Keith Belvin↗

TPSAS-NF1676L-18913-DND

Composite materials and structures are enabling technology for modern aerospace vehicles. Numerical-control manufacturing, including automated fiber placement (AFP), is widely used to fabricate these components. However, weight and performance requirements for the next generation of aerospace vehicles will push the state-of-art even further, and require development of more advanced materials, manufacturing, and structures technologies that are both affordable and efficient. The Integrated Structural Assembly of Advanced Composites (ISAAC) system is intended to address much of NASA?s critical research needs in advanced composites. The baseline ISAAC system, combining a commercial robot with multiple redundant degrees of freedom, a tool changer interface, and a special-purpose AFP end effector, enables precise and accurate additive manufacturing of composite structures, as well as development of advanced tow-steered structures with tailored load paths. The highly capable baseline system can quickly change end effectors, thus enabling further research for composites manufacturing. This extended system is similar to a high-speed machining center, where interchangeable cutters are used for different operations during metal structures fabrication. This capability enables future development, integration and assessment of new advanced manufacturing technologies, such as in-situ curing and NDE, and through-thickness reinforcements to reduce delaminations. End effectors with these advanced capabilities may be purchased, developed internally or with industry or academia, and then integrated onto the existing robotic platform to perform advanced manufacturing operations and develop new techniques and processes. Technologies, techniques and processes developed using this research-oriented system could then be transitioned to the broader composites industry.

Rob Martin↗

A Novel RF Architecture for Simultaneous Communication, Navigation, and Remote Sensing with Software-Defined Radio

The rapid growth of SmallSat and CubeSat missions at NASA has necessitated a re-evaluation of communication and remote-sensing architectures. Novel designs for CubeSat-sized single-board computers can now include larger Field-Programmable Gate Arrays (FPGAs) and faster System-on-Chip (SoCs) devices. These components substantially improve onboard processing capabilities so that varying subsystems no longer require an independent processor. By replacing individual Radio Frequency (RF) systems with a single software-defined radio (SDR) and processor, mission designers have greater control over reliability, performance, and efficiency. The presented architecture combines individual processing systems into a single design and establishes a modular SDR architecture capable of both remote-sensing and communication applications. This new approach based on a multi-input multi-output (MIMO) SDR features a scalable architecture optimized for Size, Weight, Power, and Cost (SWaP-C), with sufficient noise performance and phase-coherence to enable both remote-sensing and navigation applications, while providing a communication solution for simultaneous S-band and X-band transmission. This SDR design is developed around the NASA CubeSat Card Standard (CS2) that provides the required modularity through simplified backplane and interchangeable options for multiple radiation-hardened/tolerant processors. This architecture provides missions with a single platform for high-rate communication and a future platform to develop cognitive radio systems.

Advanced Avionics, Hybrid Processing, Data Process↗

The Integration of Life Sciences in Space: Astrobiology and Space Biology Virtual Workshops Report

A series of virtual workshops was held during June 2020 to seek ways to integrate the efforts of the astrobiology and space biology research communities under a broad umbrella of space life sciences. The overall goal was to help inspire creativity that will guide us towards new synergistic ideas complementing these existing disciplines that are of such importance to NASA. Workshop participants aspired to: (1) Exploit synergies across the biological sciences at NASA, (2) Foster research, enabling technology, and mission concepts that support commonalities in space biology, astrobiology, synthetic biology, planetary protection, and relevant human health, performance, and habitation concerns, (3) Envision the development of an “Arc of Biology in Space” to encompass this multi-faceted joint research community. The focused objective of the workshop series was to explore and demonstrate how the integration of astrobiology and space biology could be achieved, identify strengths and weaknesses in the current state of the art, and recognize where our greatest challenges lay. Specifically, we seek to: (1) Establish a scientific framework for an integrated life sciences effort, (2) Pioneer discovery by creating unique opportunities in the fundamental biological sciences, (3) Explore novel combinations of existing technologies across the relevant disciplines, (4) Invent new technologies and applications in space life sciences, and (5) Creatively increase access to spaceflight, emerging and novel technologies, Earth analogs, and simulated natural and spaceflight environments. The community aims for a broad arc of biological competence in the context of space and planetary science, spaceflight, and habitation. We will present dominant themes and innovative ideas that resulted from this interchange of relevant communities.

astrobiology↗

Navigating SmallSat Development: Where to Begin and What to Expect

This is a summarized version of a tutorial given at the 2019 NASA SmallSat Technical Interchange Meeting providing an experienced-based overview, suggestions, and guidance for SmallSat development focused on new investigators. Topics addressed include the basics of SmallSats, Mission Formulation, Realities of Flight Development, Access to Space, Mission Operations, and Remarks on the Future Directions of SmallSat Science and Technology Missions.

SmallSat↗

Packed Bed Reactor Experiment (PBRE)-2: Pressure Drop Measurements in Microgravity

Single and two-phase flow through porous media are encountered on ground and in space in numerous applications related to life support systems, fuel cells, chemical/materials processing and transporting nutrients to plants. These systems operate differently in the microgravity environment encountered in space travel because the density differences no longer cause the phases to separate or “drain” under the body force of gravity. In the absence of gravity, the interfacial or capillary forces play a more significant role in determining the operational variables such as phase distribution, liquid holdup, and pressure drop especially when the liquid inertia and viscous forces are at minimum. Lower liquid flow rates in air-water two-phase flows represent the case for most of the space processes that depend on two-phase flows in porous media. The Packed Bed Reactor Experiment (PBRE) was developed and flown on the International Space Station (ISS) by NASA to extend a series of fundamental studies of gas-liquid flows through porous media. The goal of the this series of flight experiments (PBRE-1 and PBRE-2) is to better understand the hydrodynamics of two phase flows in porous media in flow regimes dominated by inertia and viscous effects and understanding the role of the interfacial forces and their role in determining the flow dynamics. The flight experiments were preceded by a series of low gravity experiments performed on the low gravity aircraft. These experiments led to the development of a semi-empirical two-phase pressure drop and flow pattern transition in support of a number of reactor beds planned for water reclamation processes onboard of the international space station. The PBRE flight experiment was designed to deliver a wide range of tightly controlled gas (nitrogen) and liquid (water) flows to one of two interchangeable test sections differing only in the type of internal packing material. In this paper, we describe the PBRE-2 experiment and present preliminary low gravity data on pressure drop and compare with semi-empirical model pressure drop predictions. This work is supported by the National Aeronautics and Space Administration (NASA) under grant no. 80NSSC20K0830

Suratman Number↗

The Integration of Life Sciences in Space: Astrobiology and Space Biology Virtual Workshops Report

A series of virtual workshops was held during June 2020 to seek ways to integrate the efforts of the astrobiology and space biology research communities under a broad umbrella of space life sciences. The overall goal was to help inspire creativity that will guide us towards new synergistic ideas complementing these existing disciplines that are of such importance to NASA. Workshop participants aspired to: (1) Exploit synergies across the biological sciences at NASA, (2) Foster research, enabling technology, and mission concepts that support commonalities in space biology, astrobiology, synthetic biology, planetary protection, and relevant human health, performance, and habitation concerns, (3) Envision the development of an “Arc of Biology in Space” to encompass this multi-faceted joint research community. The focused objective of the workshop series was to explore and demonstrate how the integration of astrobiology and space biology could be achieved, identify strengths and weaknesses in the current state of the art, and recognize where our greatest challenges lay. Specifically, we seek to: (1) Establish a scientific framework for an integrated life sciences effort, (2) Pioneer discovery by creating unique opportunities in the fundamental biological sciences, (3) Explore novel combinations of existing technologies across the relevant disciplines, (4) Invent new technologies and applications in space life sciences, and (5) Creatively increase access to spaceflight, emerging and novel technologies, Earth analogs, and simulated natural and spaceflight environments. The community aims for a broad arc of biological competence in the context of space and planetary science, spaceflight, and habitation. We will present dominant themes and innovative ideas that resulted from this interchange of relevant communities.

astrobiology↗

Going beyond reliability to robustness and resilience in space systems

The words reliability, robustness, and resilience, are often used interchangeably to describe tough and dependable systems but the distinctions between them suggest how to design more serviceable space systems. Reliability is simply the quality of consistently performing well. A system that dependably meets its design requirements in the specified environments is reliable. The designers may not consider themselves responsible for failures under unanticipated conditions. Robustness is the capability of performing without failure under a wide range of conditions, which can go beyond the expected range to include possible off-nominal conditions. Resilience is the ability to recover from or adapt to damaging events, such as failures, accidents, external disruptions, and repurposing. Such changes are usually unanticipated. They often invalidate the usual operating assumptions and cause system failure. Reliability, robustness, and resilience describe dependable performance under increasingly difficult conditions, first the specified environment, then a wider possible environment, and finally unanticipated damaging events. These three are increasingly desirable and increasingly difficult to achieve. Engineering for resilience would design systems that can ignore or repair failures, survive accidents, and recover from disruptions. Increasing the resilience of space systems, the ability to perform after unanticipated events, would greatly increase space crew safety. Improving reliability and robustness can be done by dealing with known sources of problems, but improving resilience requires implementing a general approach to reducing the impact of unknown future events. Two contrasting approaches are reducing system complexity and adding supervisory control. The need for resilience has been claimed for decades but little has been accomplished. Systems designers assume that they understand requirements, technologies, designs, architectures, integration, testing, operations, and environments. The potential problems of changes, failures, accidents, unknown environments, and unknown unknowns are ignored. Systems designers are typically overconfident and ignore the need for robustness and resilience.

Harry W Jones↗

KSC Integration Office Documentation and Support

This report details the process of document management within the KSC Integration Office throughout my internship in the fall term of the year 2020. During this term, I was mentored by Felix A. Soto-Toro and my main objective was to support the Audit Liaison Representatives (ALR) in their documentation processes. I worked alongside the members of the KSC Integration Office to streamline the auditing process in order to facilitate the interchangement of documents and communication between auditors and our agency. My approach to this situation was to document the events of each audit in a report, which would be updated weekly every Monday following a specific format. As support I was required to gather, organize, and release data relevant to current audits in an online server for ALRs to use across the entire NASA Agency.

Ana C Arvelo Serrano↗