SEARCH · Engineering Papers

Results for “IMPACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Climatic Effect of Impacts on the Ocean

Impact-generated spherule layers provide information pertinent to the environmental consequences of very large impacts on Earth. The spherules are condensed from high velocity impact ejecta ballistically distributed worldwide. These ejecta comprise material from both the impacting body and the target. Much of this material was vaporized or atomized (in the sense of small droplets of fluid, although doubtless some of the vapor species were atomic) in the impact event, cooled and condensed, and then was re-melted or partially evaporated again on re-entry into the atmosphere far from the crater. The energy deposited in the atmosphere by the re-entering ejecta heat the stratosphere where the particles stop to the temperature of hot lava, and thermal radiation from the superheated stratosphere heats the lower atmosphere, any land surfaces, and the evaporate the surface of the ocean; how hot the atmosphere gets and how much water gets evaporated depends on the scale of the impact. The molten or solid raindrops and hailstones eventually fell out of the atmosphere and onto land or into the ocean over the course of hours and days to pile up as spherule beds, and later the finer dust falls out over months and years.

Zahnle, K. J.↗

NASA NTRS2018

Probabilistic Assessment of Tunguska-Scale Asteroid Impacts

The Tunguska meteor airburst that felled trees across >2000 sq km of Siberian forest in 1908 has been extensively studied and modeled in attempts to deduce its size, properties, and impact characteristics. However, most of the existing modeling and simulation studies have investigated a small subset of cases based on assumptions of representative densities, velocities, or other properties. In this study, we use the Probabilistic Asteroid Impact Risk (PAIR) model to assess 50 million Tunguska-scale asteroid impacts, covering a full range of potential impactor properties. The impact cases are sampled from probabilistic distributions representing our current knowledge of asteroid properties, entry trajectories, and size frequencies, and the entry, airburst, and resulting ground damage are modeled for each case. The results provide a broader characterization of the range and relative likelihood of asteroid properties that could yield Tunguska-scale impacts. The full results of this study and a companion study on impact frequencies are pending publication in an upcoming Tunguska special edition of Icarus [1,2].

Wheeler, Lorien↗

NASA NTRS2019

Observations of MMOD Impact Damage to the ISS

This paper describes meteoroid and orbital debris (MMOD) damage observations on the International Space Station (ISS). Several hundred MMOD damage sites on ISS have been documented using imagery taken from ISS windows. MMOD damage sites visible from ISS windows are typically larger – approximately 5mm diameter and greater – due to the larger viewer-to-surface distance. Closer inspection of these surfaces by astronauts during spacewalks reveals many smaller features that are typically less distinct. Characterization of these features as MMOD or non- MMOD is difficult, but can be partially accomplished by matching physical characteristics of the damage against typical MMOD impact damage observed on ground-based impact tests. Numerous pieces of space-exposed ISS hardware were returned during space shuttle missions. Subsequent ground inspection of this hardware has also contributed to the database of ISS MMOD impact damage. A handful of orbital replacement units (ORUs) from the ISS active thermal control and electrical power subsystems were swapped out and returned during the Space Shuttle program. In addition, a reusable logistics module was deployed on ISS for a total 59.4 days on 11 shuttle missions between 2001 and 2011 and then brought back in the shuttle payload bay. All of this returned hardware was subjected to detailed post-flight inspections for MMOD damage, and a database with over 1,400 impact records has been collected. A description of the largest observed damage features is provided in the paper. In addition, a discussion of significant MMOD impact sites with operational or design aspects is presented. MMOD impact damage to the following ISS modules/subsystems is described: (1) Solar Arrays, (2) US and Russian windows, (3) Extravehicular Activity (EVA) handrails, (4) Radiators, and (5) Russian Functional Cargo Block (FGB) module.

Hyde, James L.↗

NASA NTRS2020

Gully Formation at the Haughton Impact Structure (Arctic Canada) Through the Melting of Snow and Ground Ice, with Implications for Gully Formation on Mars

The formation of gullies on Mars has been the topic of active debate and scientific study since their first discovery by Malin and Edgett in 2000. Several mechanisms have been proposed to account for gully formation on Mars, from “dry” mass movement processes, release of water or brine from subsurface aquifers, and the melting of near-surface ground ice or snowpacks. In their global documentation of martian gullies, report that gullies are confined to ~27–83°S and ~28–72°N latitudes and span all longitudes. Gullies on Mars have been documented on impact crater walls and central uplifts, isolated massifs, and on canyon walls, with crater walls being the most common situation. In order to better understand gully formation on Mars, we have been conducting field studies in the Canadian High Arctic over the past several summers, most recently in summer 2018 and 2019 under the auspices of the Canadian Space Agency-funded Icy Mars Analogue Program. It is notable that the majority of previous studies in the Arctic and Antarctica, including our recent work on Devon Island, have focused on gullies formed on slopes generated by regular endogenic geological processes and in “regular” bedrock. How-ever, as noted above, meteorite impact craters are the most dominant setting for gullies on Mars. Impact craters provide an environment with diverse lithologies – including impact-generated and impact-modified rocks – and slope angle, and thus greatly variable hill slope processes could occur within a localized area. Here, we investigate the formation of gullies within the Haughton impact structure and compare them to gullies formed in unimpacted target rock in the nearby Thomas Lee Inlet

Osinski, G. R.↗

NASA NTRS2020

Stratospheric Impact on the Northern Hemisphere Winter and Spring Ozone Interannual Variability in the Troposphere

In this study we use ozone and stratospheric ozone tracer simulations from the high-resolution (0.5°x0.5°) Goddard Earth Observing System, Version 5 (GEOS-5) in a replay mode to study the impact of stratospheric ozone on tropospheric ozone interannual variability (IAV). We use these simulations in conjunction with ozone sonde measurements from 1990 to 2016 during the winter and spring seasons. The simulations include a stratospheric ozone tracer (StratO3) to aid 15in the evaluation of the impact of stratospheric ozone IAV on the IAV of tropospheric ozone at different altitudes and location. The model is in good agreement with the observed interannual variation of tropospheric ozone, except for the post-Pinatubo period(1992-1994)over the region of North America. Ozone sonde data show a negative ozone anomaly in 1992-1994 following the Pinatubo eruption, with recovery thereafter. The simulated anomaly is only half the magnitude of that observed. Our analysis suggests that the simulated Stratosphere-troposphere exchange (STE)flux deduced from the analysis 20might be too strong over the North American (50°N-70°N) region after the Mt. Pinatubo eruption in the early 1990s,maskingthe impact of lower stratospheric ozone concentration on tropospheric ozone. European ozone sonde measurements show a similar but weaker ozone depletion after the Mt. Pinatubo eruption, which is fully reproduced by the model. Analysis based on the stratospheric ozone tracer (StratO3) identifies differences in strength and vertical extent of stratospheric ozone impact on the tropospheric ozone interannual variation (IAV)between North America and Europe. Over NorthAmerica25stations, the StratO3IAV has a significant impact on tropospheric ozone from the upper to lower troposphere and explains about 60% and 66% of the simulated ozone IAV at 400 hPa, and ~11% and 34% at 700 hPa in winter and spring respectively. Over European stations, the influence is limited to the middle to upper troposphere, and becomes much smaller at 700 hPa. The Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2)assimilated fields exhibit strong longitudinal variations over northern hemisphere (NH) mid-high latitudes, with lower tropopause height and 30lower geopotential height over North America than Europe. These variations associated with the relevant variations in the location of tropospheric jet flows are responsible for the longitudinal differences in the stratospheric ozone impact, with stronger effects over North America than over Europe

tropospheric ozone IAV, Model, ozonesonde, stratos↗

NASA NTRSDate not supplied

Application of Lidar-Radar Combined Data Products during the IMPACTS 2020 Field Campaign

The Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) is a three-year field campaign investigating the formation and lifecycle of banded, precipitation structures within intense wintertime cyclones impacting the highly-populated northeast United States. Unlike previous campaigns in the region, IMPACTS mission scientists have access to and coordinate the NASA ER-2 and P-3 aircraft to collect observations from both a remote sensing and in-situ perspective, respectively. For IMPACTS, the ER-2 aircraft was equipped with lidar (CPL), radar (CRS, HIWRAP, EXRAD), microwave radiometer (CoSMIR, AMPR) instruments, each with their own unique capabilities and limitations. Our on-going work effort aims to develop IMPACTS lidar and radar merged data products, which can be used to supplement the raw data sources, tease out additional aspects of the mechanisms underpinning wintertime cyclones, and enhance our understanding of microphysical properties in sensor overlap regions. Preliminary merged data products combine CPL lidar with any one of the NASA High Altitude Radar (HAR) radar products (CRS, HIWRAP, EXRAD) and represent these data as both normalized values and translated to reflectivity signal (dB). Continuing work will further refine our merged data product algorithm to provide additional information on hydrometeor species identification, ice crystal habit, and ice-water content, which will help IMPACTS achieve its mission goal of improving microphysical properties retrievals from both airborne and spaceborne platforms.

Stephen D. Nicholls↗

NASA NTRS2022

A Late Paleocene Age for Greenland’s Hiawatha Impact Structure

The ~31-km-wide Hiawatha structure, located beneath Hiawatha Glacier in northwestern Greenland, has been proposed as an impact structure that may have formed after the Pleistocene inception of the Greenland Ice Sheet. To date the structure, we conducted Ar-40/Ar-39 analyses on glaciofluvial sand and U–Pb analyses on zircon separated from glaciofluvial pebbles of impact melt rock, all sampled immediately downstream of Hiawatha Glacier. Unshocked zircon in the impact melt rocks dates to ~1915 Ma, consistent with felsic intrusions found in local bedrock. The Ar-40/Ar-39 data indicate Late Paleocene resetting and shocked zircon dates to 57.99 ± 0.54 Ma, which we interpret as the impact age. Consequently, the Hiawatha impact structure significantly predates Pleistocene glaciation and is unrelated to either the Paleocene-Eocene Thermal Maximum or flood basalt volcanism in east Greenland. However, it was contemporaneous with the Paleocene Carbon Isotope Maximum, although the impact’s exact paleoenvironmental and climatic significance await further investigation.

Gavin G Kenny↗

NASA NTRSDate not supplied

The Integrated Impact of Diet on Human Immune Response, the Gut Microbiota, and Nutritional Status During Adaptation to Spaceflight

Long-duration spaceflight impacts human physiology, including well documented immune system dysregulation. Diet, the microbiome, and immune system function are interlinked, but diet is the only one of these factors that we have the ability to easily, and significantly, alter on Earth or during flight. As we better understand dietary impacts on physiology, we may then improve the spaceflight diet to improve crew health and potentially reduce spaceflight-associated physiological decrements. Increasing the consumption of fruits and vegetables and bioactive compounds (e.g., omega-3 fatty acids, lycopene, flavonoids) and therefore enhancing overall nutritional intake from the nominal shelf-stable, fully-processed, space food system is expected to serve as a countermeasure to detrimental impacts to human physiology, including dysregulation in immunological profiles, the taxonomic profile of the gut microbiota, and nutritional status during spaceflight. In this study, first we sought to determine the effect of the nominal shelf-stable spaceflight diet compared to an "enhanced" shelf-stable spaceflight diet on human biochemistry, immunology, and the microbiome in a ground-based, simulated space mission. The ground analog portion of this study was conducted in the NASA Human Exploration Research Analog (HERA) Campaign 4 missions, which consisted of four 45-day missions with closed chamber confinement and realistic mission simulation to study effects on crew health and performance. As reported previously, analyses indicate beneficial associations between diet and markers of nutritional status, stress, the microbiome, and cognitive performance. Intake and beneficial associations varied by subject. This data will be used as a ground-based control for spaceflight, where the spaceflight environment (e.g., radiation, microgravity) will have additional impacts and the potential to evaluate effects of the diet will be greater. The second phase of this study is to occur on the International Space Station, where it is currently being implemented. The test plan is similar to that used in the HERA missions. The enhanced diet is intended to provide 25% of the crews’ diet with foods rich in omega-3 fatty acids, lycopene, and flavonoids, along with more fruits and vegetables in general (the other 75% of the diet will be obtained from standard and crew preference items available on the ISS). Biological samples (blood, urine, stool, and saliva) are being collected from participants at selected time points before, during, and after the mission. Data collection also includes dietary intake recording and body mass measurement. Currently, 6 of 9 planned astronauts have completed data collection. Analysis of immune markers, latent herpes virus reactivation, the taxonomic and metatranscriptomic profile of the gut microbiome, and nutritional status biomarkers and biochemical metabolites will occur in batch to minimize sample handling variations. Mixed models statistical analyses will be used, incorporating random effects to account for repeated measures within individuals to assess the impact of diet on physiological outcomes. We expect this study to provide evidence of beneficial impact of this enhanced diet on crew health and adaptation to spaceflight. These data will aid in evidence-based mass-risk trades for food system design and development of targeted dietary interventions for future exploration-class space missions.

Grace L. Douglas↗

NASA NTRSDate not supplied

XRF Characterization of MMOD Impact Damage

Introduction The Hypervelocity Impact Technology (HVIT) Group at the NASA Johnson Space Center (JSC) has performed over 150 post flight MMOD inspections on returned space-ex-posed hardware and collected over 1,600 samples. Determination of the impactor source typically requires an analysis of the projectile residue in the damage feature. At this time, about 20% of the samples have been processed. Types of Samples Samples in the HVIT group collection can be classified into two types. Indirect (non-destructive) samples are produced when a pliable material (e.g., adhesive tape or dental mold) is inserted into an impact feature. With this type of sampling technique, crater material and (hopefully) projectile residue material is embedded in the sample media and can detected using further chemical characterizing techniques. Direct (destructive) sampling involves the in-tact extraction of material from the spacecraft and is done in a manner that the entire impact feature can be excised intact. This technique provides the greatest chance of successfully determining impactor source due to the entirety of the projectile remnants being present within the collected sample. Updated Projectile Residue Detection Techniques Previous assessments of projectile provenance have involved the use of samples that are first mounted in epoxy, sectioned to expose the crater interior, imaged with a scanning electron microscope (SEM), then any observed impactor residue was then analyzed using an energy dispersive spectrometer (EDS). This technique, while proven, may be supplemented with other types of elemental analysis techniques that can observe major element chemistry, in order to improve throughput of sample analysis. The Astromaterials Research and Exploration Science (ARES) Division at JSC, for example, operates a Bruker M4 Tornado micro-X-Ray fluorescence (XRF) spectrometer, capable of creating elemental maps of areas around these small impact features in a couple of hours, with a spot size <20 μm. The potential advantage with this technique lies in sample preparation, as no polishing or conductive coatings are needed. Early trials attempted to deter-mine impactor composition by collecting spectra from intact samples by aiming the X-Rays directly into the impact feature, but the signal:noise ratio was too low for confident material identification. Sample preparation for XRF then relies on sectioning the samples parallel to the impactor trajectory in order to expose the largest area of subsurface damage possible, thus maximizing the signal from any small impactor remnants. Complementary to the use of XRF for sample analysis, ARES also houses a Nikon XTH 320 micro-X-Ray computed tomography (XCT). This instrument can be used to create 3D visualizations of impact damage for the determination of crater volumes and dimensions, as well as for the determination of the best place to section each sample for the subsequent XRF analysis.

J L Hyde↗

NASA NTRS2024

Idaho & Oregon Agriculture: Monitoring Vegetation Impacts of Livestock Management Practices Used to Reduce Predator Conflicts on Idaho and Oregon Grazing Allotments

The practice of night penning, which involves corralling livestock into a fenced, secure area overnight, aims to safeguard animals from predators. Although this method has proven successful in minimizing interactions between livestock and wildlife, the extent of its impact on vegetation communities is still being explored. This project examines the feasibility of using Net Primary Productivity (NPP) values from the Rangeland Analysis Platform (RAP) to quantify the impacts of night penning on rangeland vegetation communities. RAP provides spatially distributed values of vegetation composition, cover, and productivity, and is derived from imagery from Landsat 5, Landsat 7 & Landsat 8 at a 30m resolution for rangelands across the United States. Our DEVELOP team partnered with Alderspring Ranch, Krebs Livestock, and the U.S Department of Agriculture Animal & Plant Health Inspection Service (APHIS) to analyze the impacts of night penning on vegetation communities. We identified control sites that captured the topographic characteristics of night pen sites used by our partners. We then quantified and compared changes in annual NPP between night pen and control sites. Our analysis of RAP NPP data, using a control-treatment design did not find impacts of night penning on vegetation. However, this was a preliminary analysis, and does not conclusively quantify the impacts of night penning on rangeland vegetation. Our analysis indicated that RAP may be a feasible tool to study livestock management impacts on rangeland vegetation; however, future studies could further validate these findings through ground observations.

Rangeland Analysis Platform (RAP)↗

NASA NTRSDate not supplied

Effects of Limiting Container Diameter on Crater Morphometry in Laboratory Impact Experiments.

Laboratory impact experiments provide a mechanism to test and understand impact events that affect every planetary object in our Solar System. Impact experiments have been conducted on a wide variety of mediums (e.g., sand, ice, solid rock, regolith simulant [1–4]) in a variety of container sizes, depending on the laboratory. While the specific parameters of each impact experiment vary greatly from impacting medium, projectile type and size, speed, etc., there has not been any in depth analysis of the effects that limiting container dimensions might have on the resulting subsurface flow field and ultimately the crater structure. Here we asses the effects of container diameter by conducting a series of cratering experiments on five different container sizes. The results of this study will be informative to the impact community such that closer consideration will be taken regarding the selection of container size to insure the most high quality results with less interference from the boundary conditions.

Megan D. Mouser↗

DOE OSTI2010

The nature of airbursts and their contribution to the impact threat.

Ongoing simulations of low-altitude airbursts from hypervelocity asteroid impacts have led to a re-evaluation of the impact hazard that accounts for the enhanced damage potential relative to the standard point-source approximations. Computational models demonstrate that the altitude of maximum energy deposition is not a good estimate of the equivalent height of a point explosion, because the center of mass of an exploding projectile maintains a significant fraction of its initial momentum and is transported downward in the form of a high-temperature jet of expanding gas. This 'fireball' descends to a depth well beneath the burst altitude before its velocity becomes subsonic. The time scale of this descent is similar to the time scale of the explosion itself, so the jet simultaneously couples both its translational and its radial kinetic energy to the atmosphere. Because of this downward flow, larger blast waves and stronger thermal radiation pulses are experienced at the surface than would be predicted for a nuclear explosion of the same yield at the same burst height. For impacts with a kinetic energy below some threshold value, the hot jet of vaporized projectile loses its momentum before it can make contact with the Earth's surface. The 1908 Tunguska explosion is the largest observed example of this first type of airburst. For impacts above the threshold, the fireball descends all the way to the ground, where it expands radially, driving supersonic winds and radiating thermal energy at temperatures that can melt silicate surface materials. The Libyan Desert Glass event, 29 million years ago, may be an example of this second, larger, and more destructive type of airburst. The kinetic energy threshold that demarcates these two airburst types depends on asteroid velocity, density, strength, and impact angle. Airburst models, combined with a reexamination of the surface conditions at Tunguska in 1908, have revealed that several assumptions from the earlier analyses led to erroneous conclusions, resulting in an overestimate of the size of the Tunguska event. Because there is no evidence that the Tunguska fireball descended to the surface, the yield must have been about 5 megatons or lower. Better understanding of airbursts, combined with the diminishing number of undiscovered large asteroids, leads to the conclusion that airbursts represent a large and growing fraction of the total impact threat.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2019

Experiments and Simulations of Hypervelocity Impact Plasmas: Final Report

The space environment is fraught with complex plasmas spanning a wide range of densities and temperatures. Much of space plasma research has focused on large-scale changes in the ambient plasma and fields from the Sun to the Earth’s atmosphere, driven primarily by the solar wind. Yet one particular type of space plasma, which forms from a hypervelocity impact, remains poorly understood. Hypervelocity impactors include both meteoroids and space debris. Meteoroids are naturally occurring objects in space that travel between 11 and 72.8 km/s and originate primarily from comets and asteroids. In contrast, space debris are human-made objects with speeds typically < 11 km/s. Hypervelocity impactors routinely hit spacecraft, yet the physics behind the formation of the plasma and the dynamics of its expansion remain largely unknown. The complexity of this phenomenon necessitates a research approach that includes both experimental studies and numerical simulation in order to understand the underlying physical processes that occur upon formation and expansion of the impact plasma. Our research has focused on providing the first comprehensive understanding of plasma generated by hypervelocity impacts by meteoroids and space debris on spacecraft in order to characterize the behavior of the expanding plasma and its interactions with the ambient environment. We conducted experimental campaigns at a dust accelerator facility that can accelerate particles up to 60 km/s, which is representative of meteoroid speeds, and at a light gas gun facility that can accelerate larger projectiles up to 7 km/s, which is representative of orbital debris. The experiments included plasma, optical and radio frequency (RF) sensors in order to understand the dynamics and associated RF emission resulting from hypervelocity plasmas. Furthermore, we combined the collected data with results from numerical simulations using particle-in-cell (PIC) and smoothed particle hydrodynamics (SPH) techniques. Using results from both experimental measurements and simulations, we addressed the following outstanding science questions: 1) What are the properties of hypervelocity impact plasmas? 2) What conditions cause impact plasmas to create RF emission and what is the power dependence on frequency? 3) How does the ambient environment around the spacecraft, including the background magnetic and electric fields and plasma density, influence the hypervelocity impact plasmas?

42 ENGINEERING↗

DOE OSTI2019

Variables Influenced by Thermal Mass and its Impact on Energy Performance in Buildings

There is no question that thermal mass has an impact on the energy performance of buildings, both the peak energy demand and overall consumption. However, there are many variables that contribute to and influence the impact of mass on energy performance. This paper is the result of an analytic study that evaluated thermal mass and associated building envelope energy performance for commercial and residential prototype buildings. Relationships between thermal mass, insulation levels, internal gains, outdoor climate, building usage and user preferences were studied. In this paper, authors analyzed how these variables interact and investigated optimized conditions for utilization of thermal mass. It is also discussed how air conditioning operation, exterior and interior loads, and thermostat set points impact the usefulness of thermal mass in a building to favorably impact peak demand and energy savings. Existing methods and approaches to evaluate the impact of thermal mass are discussed and a preferred design approach is presented to estimate the impact of thermal mass on energy peak demand and overall energy consumption under both heating and cooling conditions.

Pallin, Simon B.↗

DOE OSTI2020

Incorporating the Impacts of Climate Change on Hydrology in a Performance Assessment Model - 20403

The evidence of climate change is increasingly well-documented and impacts should be incorporated in performance assessment studies. The current climate literature provides both observational evidence and climate model projections of climate trends and/or climate change in the late 20. and early 21. centuries for North America and the northeast United States. Probabilistic modeling is a core requirement for quantifying uncertainty and evaluating its impacts. Not evaluating future climate states in a performance assessment because of the existence of uncertainty is contradictory to good modeling practices - the most uncertain issues and parameters require the most attention in effective probabilistic modeling. Excluding climate change limits development of modeling information that could aid in effective decision making. In this work we develop methods to use the output from hydrologic models and analysis of historical aerial imagery to quantify and implement the impacts of climate change on hydrologic processes at a nuclear waste site in West Valley, New York. Specifically, we used the HELP (Hydraulic Performance of Landfill Performance) model to characterize key hydrologic processes under both current and future climate conditions to assess the impacts of changing climate on hydrology. A suite of previous climatic models were reviewed and synthesized to produce a cohesive representation of the current state of knowledge of the impact of climate change on important model inputs such as precipitation. Output from the HELP simulations was coupled to the GoldSim model that was used to develop the Probabilistic Performance Assessment (PPA) approach through the application of a novel 'nearest neighbor' technique. First, several thousand realizations were generated from the HELP model using a Latin Hypercube experimental design to ensure adequate coverage of the parameter space of explanatory variables used to drive HELP. For example, porosity is a physical parameter that is used as an input to both HELP and the GoldSim PA model. We then ran sensitivity analysis (SA) algorithms on the output of HELP for each of the responses of interest. For each predictor, each time we build an SA model we get a different value for the sensitivity index (SI). From the collection of all the SA models, the average was computed among all of the SIs to represent the predictor within the context of the nearest neighbor approach. That is, we conduct SA on each HELP outcome for each scenario. This gives us parameter sensitivity indices for the outcomes. We average the parameter sensitivity indices across the outcomes to get the average SI for a scenario. For each realization that is generated from the Goldsim PA model, Goldsim generates random values for physical/empirical parameters that HELP uses as well. For each vector of physical/empirical parameters that Goldsim generates, the vector from the 5,000 HELP runs that is most 'similar' to the Goldsim vector is computed using the nearest neighbor approach. In this context 'similar' means minimization of the SA-weighted sum of the absolute differences among the 5,000 values computed for this statistic, where each value corresponds to a different HELP realization. In order to account for the impacts of climate change, this process was repeated using the spatially downscaled future climate projections. For each of the key parameters of interest, it was assumed that a linear change depicted the relationship between the values for the present day and those for 2100. In this way, the climatically-driven changes in key parameters used to inform the GoldSim model are quantified and incorporated into the PA model output for the future. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2016

Impact initiation of reactive aluminized fluorinated acrylic nanocomposites

The initiation of aluminized fluorinated acrylic (AlFA) nanocomposites during modified Taylor impact tests was investigated. Samples were impacted against a steel or sapphire anvil at a nominal velocity of 150 m/s. A framing camera was used to capture head-on and side-profile impact images for the sapphire window and steel plate rigid anvils, respectively. Correlations were drawn between both experimental setups to determine the initiation locations and reaction times. Reactions were found to initiate at an intermediate radius on the impact face of the pellet at a time near full compaction. From simulations, the highest strains and temperatures were found at radii similar to those observed in experiments at the time of ignition. Off-normal impacts produced higher localized straining and temperatures on one-half of the pellet. As a result, the copper projectile, used for delivery, was revealed to aid in a shear assisted reaction by helping to drive the pellet material outward as the projectile deformed radially.

36 MATERIALS SCIENCE↗

DOE OSTI2010

Negotiating river ecosystems: Impact assessment and conflict mediation in the cases of hydro-power construction

In this paper we discuss how the legitimacy of the impact assessment process is a key issue in conflict mediation in environmental impact assessment. We contrast two EIA cases in hydro-power generation plans made for the Ii River, Finland in different decades, and evaluate how impact assessment in these cases has contributed to the creation, mediation and resolution of conflicts. We focus on the elements of distributional and procedural justice that made the former EIA process more legitimate and consensual and the latter more conflictual. The results indicate that it is crucial for conflict mediation to include all the values and interests of the parties in the goal-setting process and in the definition and assessment of alternatives. The analysis also indicates that procedural justice is the most important to help the people and groups involved to accept the legitimacy of the impact assessment process: how different parties and their values and interests are recognized, and how participation and distribution of power are organized in an impact assessment process. It is confirmed in this article that SIA may act as a mediator or a forum providing a process through which competing knowledge claims, various values and interests can be discussed and linked to the proposed alternatives and interventions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2015

Using causal maps to support ex-post assessment of social impacts of dams

- Highlights: • We defend the usefulness of causal maps (CM) for ex-post impact assessment of dams. • Political decisions are presented as unavoidable technical measures. • CM enable the identification of multiple causes involved in the dam impacts. • An alternative management of the dams is shown from the precise tracking of the causes. • Participatory CM better the quality of information and the governance of the research. This paper presents the results of an ex-post assessment of two important dams in Brazil. The study follows the principles of Social Impact Management, which offer a suitable framework for analyzing the complex social transformations triggered by hydroelectric dams. In the implementation of this approach, participative causal maps were used to identify the ex-post social impacts of the Porto Primavera and Rosana dams on the community of Porto Rico, located along the High Paraná River. We found that in the operation of dams there are intermediate causes of a political nature, stemming from decisions based on values and interests not determined by neutral, exclusively technical reasons; and this insight opens up an area of action for managing the negative impacts of dams.

54 ENVIRONMENTAL SCIENCES↗