Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Secondary electron emission characteristics of oxide electrodes in flat electron emission lamp

The present study concerns with the secondary electron emission coefficient, γ, of the cathode materials used in the newly developed flat electron emission lamp (FEEL) devices, which essentially integrates the concept of using cathode for fluorescent lamp and anode for cathode ray tube (CRT) to obtain uniform planar lighting. Three different cathode materials, namely fluorine-doped tin oxide (FTO), aluminum oxide coated FTO (Al{sub 2}O{sub 3}/FTO) and magnesium oxide coated FTO (MgO/FTO) were prepared to investigate how the variations of γ and working gases influence the performance of FEEL devices, especially in lowering the breakdown voltage and pressure of the working gases. The results indicate that the MgO/FTO bilayer cathode exhibited a relatively larger effective secondary electron emission coefficient, resulting in significant reduction of breakdown voltage to about 3kV and allowing the device to be operated at the lower pressure to generate the higher lighting efficiency.

36 MATERIALS SCIENCE↗

ZnO/CdS bi-layer nanostructures photoelectrode for dye-sensitized solar cells

Simple chemical deposition method for the synthesis of ZnO/CdS bilayer photoelectrode on fluorine doped tin oxide (FTO) coated glass substrate in aqueous medium at low temperature (< 373K) is described. The different preparative parameters such as deposition time, bath temperature, concentration of precursor solution and, pH of the bath etc. were optimized. Nanograined ZnO was deposited on FTO coated glass substrates by dip-coating method, whereas CdS nanorods were successfully synthesized on pre-deposited ZnO film by Chemical Bath Deposition (CBD) method. The Photovoltaic properties of FTO/ZnO/CdS bilayer photo electrodes were also studied. A maximum short circuit current density of 9.1 mA cm-2 and conversion efficiency 1.05% are observed for ZnO/CdS-10min. Layer, which supports fast electron injection kinetics due to hetero structured nanorod, while minimum values of 0.53mA cm-2 and 0.01% respectively are observed for only ZnO deposited layer.

36 MATERIALS SCIENCE↗

A first-principles study of electronic properties of H and F-terminated zigzag BNC nanoribbons

Nanoribbons are quasi one-dimensional structures which have interesting electronic properties on the basis of their edge geometries, and width. We studied the electronic properties of hydrogen and fluorine-terminated zigzag BNC nanoribbons (BNCNRs) using a first-principles based density functional theory approach. We considered BNCNRs that were composed of an equal number of C-C and B-N dimers; one of the edges ends with an N atom and opposite edge ends with a C atom. These two edge atoms are passivated by H or F atoms. Our results suggest that hydrogen-terminated BNCNRs (H-BNCNRs) and flourine-terminated BNCNRs (F-BNCNRs) have different electronic properties. H-BNCNRs exhibit intrinsic half-metallic behavior while F-BNCNRs are indirect band gap semiconductors. Chemical functionalization of BNCNRs with H and F atoms show that BNCNRs have a diverse range of electronic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Facile synthesis of one dimensional ZnO nanostructures for DSSC applications

Development of zinc oxide (ZnO) nanostructure based third generation dye sensitized solar cell is interesting compared to conventional silicon solar cells. ZnO nanostructured thin films were electrochemically deposited onto fluorine doped tin oxide (FTO) glass substrate. The effect of ethylene-diamine-tetra-acetic acid (EDTA) on structural, morphological and optical properties is investigated using X-ray diffraction (XRD) meter, field emission scanning electron microscope (FE-SEM) and micro Raman spectroscopy. XRD patterns reveal that the prepared nanostructures are hexagonal wutrzite structures with (101) plane orientation, the nanostructure prepared using EDTA exhibits better crystallinity. FE-SEM images illustrate that the morphological changes are observed from nanorod structure to cauliflower like structure as EDTA is added. Micro Raman spectra predict that cauliflower like structure possesses a higher crystalline nature with less atomic defects compared to nanorod structures. Dye sensitized solar cell (DSSC) is constructed for the optimized cauliflower structure, and open circuit voltage, short circuit density, fill factor and efficiency are estimated from the J-V curve.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrodeposition of gold nanoparticles on mesoporous TiO{sub 2} photoelectrode to enhance visible region photocurrent

Electrodeposition of gold nanoparticles (Au NPs) on the mesoporous TiO{sub 2} photoelectrode to enchance visible region photocurrent have been investigated. Mesoporous TiO{sub 2} was prepared by a sol gel method and immobilized to the fluorine doped tin oxide (FTO) substrate by dip coating technique. Gold nanoparticles were electrodeposited on the TiO{sub 2} surface and the result FTO/TiO{sub 2}/Au was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), UV-Vis diffuse reflectance spectroscopy (DRS), and X-ray diffraction (XRD). The generated photocurrent was evaluated with an electrochemical workstation (e-DAQ/e-recorder 401) using 60 W wolfram lamp as visible light source. The photoelectrochemical evaluation indicated that the presence of gold nanoparticles on TiO{sub 2} photoelectrode shall enhance the photocurrent up to 50%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of porous structured ZnO thin film for dye sensitized solar cell applications

Zinc oxide (ZnO) and zinc oxide/eosin yellow (ZnO/EY) thin films were potentiostatically deposited onto fluorine doped tin oxide (FTO) glass substrate. Effect of eosin yellow dye on structural, morphological and optical properties was studied. X-ray diffraction patterns, micro Raman spectra and photoluminescence (PL) spectra reveal hexagonal wurtzite structure with less atomic defects in 101 plane orientation of the ZnO/EY film. Scanning electron microscopy (SEM) images show flower for ZnO and porous like structure for ZnO/EY thin film, respectively. DSSC was constructed and evaluated by measuring the current density verses voltage curve.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism in intercalated graphene

Using density functional calculations we explore the possibilities of inducing spin moments in otherwise non-magnetic electronic structure of graphene. Through intercalation of H, N, O and F atoms between two hexagonal stacked graphene layers, we show that unpaired electrons can be generated when the planar coordinates of the functional atoms coincide with the center of the graphene hexagon. The spin-half states are realized at the functional sites for certain values of interlayer separations. For oxygen and fluorine these interlayer separations represent the natural stable phases and for hydrogen and nitrogen they induce instability which can be overcome by applying external pressure. We attribute the formation of spin-half states to the one dimensional confinement potential exerted by the graphene layers on the valence electrons of the functional elements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Engineered band structure for an enhanced performance on quantum dot-sensitized solar cells

A photon-to-current efficiency of 2.93% is received for the Mn-doped CdS (MCdS)-quantum dot sensitized solar cells (QDSSCs) using Mn:ZnO (MZnO) nanowire as photoanode. Hydrothermal synthesized MZnO are spin-coated on fluorine doped tin oxide (FTO) glass with P25 paste to serve as photoanode after calcinations. MCdS was deposited on the MZnO film by the successive ionic layer adsorption and reaction method. The long lived excitation energy state of Mn{sup 2+} is located inside the conduction band in the wide bandgap ZnO and under the conduction band of CdS, which increases the energetic overlap of donor and acceptor states, reducing the “loss-in-potential,” inhibiting charge recombination, and accelerating electron injection. The engineered band structure is well reflected by the electrochemical band detected using cyclic voltammetry. Cell performances are evidenced by current density-voltage (J-V) traces, diffuse reflectance spectra, transient PL spectroscopy, and incident photon to current conversion efficiency characterizations. Further coating of CdSe on MZnO/MCdS electrode expands the light absorption band of the sensitizer, an efficiency of 4.94% is received for QDSSCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-power resistive random access memory by confining the formation of conducting filaments

Owing to their small physical size and low power consumption, resistive random access memory (RRAM) devices are potential for future memory and logic applications in microelectronics. In this study, a new resistive switching material structure, TiO{sub x}/silver nanoparticles/TiO{sub x}/AlTiO{sub x}, fabricated between the fluorine-doped tin oxide bottom electrode and the indium tin oxide top electrode is demonstrated. The device exhibits excellent memory performances, such as low operation voltage (<±1 V), low operation power, small variation in resistance, reliable data retention, and a large memory window. The current-voltage measurement shows that the conducting mechanism in the device at the high resistance state is via electron hopping between oxygen vacancies in the resistive switching material. When the device is switched to the low resistance state, conducting filaments are formed in the resistive switching material as a result of accumulation of oxygen vacancies. The bottom AlTiO{sub x} layer in the device structure limits the formation of conducting filaments; therefore, the current and power consumption of device operation are significantly reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement-mode operation of multilayer MoS{sub 2} transistors with a fluoropolymer gate dielectric layer

Enhancement-mode multilayer molybdenum disulfide (MoS{sub 2}) field-effect transistors (FETs), which are an immensely important component toward low-power electronics based on a two-dimensional layered semiconductor, are demonstrated using the fluoropolymer CYTOP as a gate dielectric. The fabricated devices exhibit threshold voltage (V{sub TH}) of ∼5.7 V with field-effect mobility (μ{sub FE}) of up to 82.3 cm{sup 2}/V s, and the characteristics are compared with the depletion-mode characteristics of MoS{sub 2} FETs with the cross-linked Poly(4-vinylphenol) gate dielectric (V{sub TH} ∼ −7.8 V). UV photoelectron spectroscopy analysis indicates that increased surface potential due to the surface dipole effect of the fluorine group influences the positive V{sub TH} shift.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Potential energy surfaces of the electronic states of Li{sub 2}F and Li{sub 2}F{sup −}

The potential energy surfaces of the ground and low-lying excited states for the insertion reaction of atomic fluorine (F) and fluoride (F{sup −}) into the dilithium (Li{sub 2}) molecule have been investigated. We have carried out explicitly correlated multi-reference configuration interaction (MRCI-F12) calculations using Dunning’s augmented correlation-consistent basis sets. For the neutral system, the insertion of F into Li{sub 2} proceeds via a harpoon-type mechanism on the ground state surface, involving a covalent state and an ionic state which avoid each other at long distance. A detailed analysis of the changes in the dipole moment along the reaction coordinate reveals multiple avoided crossings among the excited states and shows that the charge-transfer processes play a pivotal role for the stabilization of the low-lying electronic states of Li{sub 2}F. For the anionic system, which is studied for the first time, the insertion of F{sup −} is barrierless for many states and there is a gradual charge transfer from F{sup −} to Li{sub 2} along the reaction path. We also report the optimized parameters and the spectroscopic properties of the five lowest states of the neutral and seven lowest states of the anionic systems, which are strongly stabilized with respect to their respective Li{sub 2} + F/F{sup −} asymptotes. The observed barrierless insertion mechanisms for both systems make them good candidates for investigation under the ultracold regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon dots decorated vertical SnS{sub 2} nanosheets for efficient photocatalytic oxygen evolution

Metal sulfides are highly desirable materials for photocatalytic water splitting because of their appropriate energy bands. However, the poor stability under light illumination in water hinders their wide applications. Here, two-dimensional SnS{sub 2} nanosheets, along with carbon dots of the size around 10 nm, are uniformly grown on fluorine doped tin oxide glasses with a layer of nickel nanoparticles. Significantly, strong light absorption and enhanced photocurrent density are achieved after integration of SnS{sub 2} nanosheets with carbon dots. Notably, the rate of oxygen evolution reached up to 1.1 mmol g{sup −1} h{sup −1} under simulated sunlight irradiation featuring a good stability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pulsed H{sub 2} - F{sub 2} laser with simultaneous lasing on rotational and vibrational-rotational transitions

The possibility of operation of a pulsed chemical H{sub 2} - F{sub 2} laser on purely rotational transitions with simultaneous lasing on vibrational - rotational transitions is theoretically investigated. The lasing of a hydrogen-fluorine laser (mixture pressure 1.1 atm) on both v,j - 1 {yields} v - 1,j (j=2 - 20) and v,j {yields} v,j - 1 (j = 12 - 19) transitions has been modelled taking into account the resonant one- and two-quanta vibrational - rotational processes. The calculated specific energy extraction for purely rotational transitions reaches 0.3-0.5 J L{sup -1} at j=18 and 19 (wavelength 15.5-14 {mu}m) and 0.4-0.7 J L{sup -1} at j=13 and 14 (wavelength 21-19 {mu}m). (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

Imaging broadband soft X-ray transmission-grating spectrograph for a wavelength range λ > 111 Å

A family of aperiodic Mo/Be multilayer mirrors was designed for maximum uniform reflectivity in the ranges 111 – 138, 111 – 150, 111 – 200 and 111 – 222 Å at normal radiation incidence. The simulations took into account the existence of Mo-on-Be and Be-on-Mo transition layers. It was shown that the reflectivity may be as high as 10% in an octave wavelength range of 111 – 222 Å. We demonstrate the operation of an imaging transmission-grating spectrograph with a broadband Mo/Be multilayer mirror with a uniform reflectivity in the wavelength range 111 – 138 Å synthesised at the Institute for the Physics of Microstructures, RAS. The spectrograph was used to record the line spectra of multiply charged fluorine and magnesium ions from a laser-produced plasma. The role of the grating support structure in the formation of spectral source images is discussed. The spatial resolution of 50 μm is demonstrated. (laser applications and other topics in quantum electronics)

36 MATERIALS SCIENCE↗

Synthesis and Spin Trapping Properties of Polystyrene Supported Trifluoromethylated Cyclic Nitrones

Polystyrene supported fluorinated cyclic nitrone spin-traps (Resin-2-HFDMPO and Resin-2-PFDMPO) containing a trifluoromethyl pyrroline-N-oxide core were developed to detect free radicals under flow conditions. A continuous flow EPR technique was used to evaluate the spin trapping properties of these tethered nitrones. While both resins trapped radicals, polymer supported nitrone Resin-2PFDMPO with a longer and more flexible linker showed a more information rich spectrum than Resin-2-HFDMPO.

Nitrone, fluorinated, polymer supported, spin trap↗

THE ORIGIN AND EVOLUTION OF THE HALO PN BoBn 1: FROM A VIEWPOINT OF CHEMICAL ABUNDANCES BASED ON MULTIWAVELENGTH SPECTRA

We have performed a comprehensive chemical abundance analysis of the extremely metal-poor ([Ar/H] < -2) halo planetary nebula (PN) BoBn 1 based on International Ultraviolet Explorer archive data, Subaru/High-Dispersion Spectrograph spectra, VLT/UVES archive data, and Spitzer/IRS spectra. We have detected over 600 lines in total and calculated ionic and elemental abundances of 13 elements using detected optical recombination lines (ORLs) and collisionally excited lines (CELs). The estimations of C, N, O, and Ne abundances from the ORLs and Kr, Xe, and Ba from the CELs are done the first for this nebula, empirically and theoretically. The C, N, O, and Ne abundances from ORLs are systematically larger than those from CELs. The abundance discrepancies apart from O could be explained by a temperature fluctuation model, and that of O might be by a hydrogen-deficient cold component model. We have detected five fluorine and several slow neutron capture elements (the s-process). The amounts of [F/H], [Kr/H], and [Xe/H] suggest that BoBn 1 is the most F-rich among F-detected PNe and is a heavy s-process element rich PN. We have confirmed dust in the nebula that is composed of amorphous carbon and polycyclic aromatic hydrocarbons with a total mass of 5.8 x 10{sup -6} M{sub sun}. The photoionization models built with non-LTE theoretical stellar atmospheres indicate that the progenitor was a 1-1.5 M{sub sun} star that would evolve into a white dwarf with an {approx}0.62 M{sub sun} core mass and {approx}0.09 M{sub sun} ionized nebula. We have measured a heliocentric radial velocity of +191.6 {+-}1.3 km s{sup -1} and expansion velocity 2V{sub exp} of 40.5 {+-} 3.3 km s{sup -1} from an average over 300 lines. The derived elemental abundances have been reviewed from the standpoint of theoretical nucleosynthesis models. It is likely that the elemental abundances except N could be explained either by a 1.5 M{sub sun} single star model or by a binary model composed of 0.75 M{sub sun} + 1.5 M{sub sun} stars. Careful examination implies that BoBn 1 has evolved from a 0.75 M{sub sun} + 1.5 M{sub sun} binary and experienced coalescence during the evolution to become a visible PN, similar to the other extremely metal-poor halo PN, K 648 in M 15.

79 ASTRONOMY AND ASTROPHYSICS↗

THE CIRCUMSTELLAR ENVIRONMENT OF R CORONAE BOREALIS: WHITE DWARF MERGER OR FINAL-HELIUM-SHELL FLASH?

In 2007, R Coronae Borealis (R CrB) went into a historically deep and long decline. In this state, the dust acts like a natural coronagraph at visible wavelengths, allowing faint nebulosity around the star to be seen. Imaging has been obtained from 0.5 to 500 {mu}m with Gemini/GMOS, Hubble Space Telescope/WFPC2, Spitzer/MIPS, and Herschel/SPIRE. Several of the structures around R CrB are cometary globules caused by wind from the star streaming past dense blobs. The estimated dust mass of the knots is consistent with their being responsible for the R CrB declines if they form along the line of sight to the star. In addition, there is a large diffuse shell extending up to 4 pc away from the star containing cool 25 K dust that is detected all the way out to 500 {mu}m. The spectral energy distribution of R CrB can be well fitted by a 150 AU disk surrounded by a very large diffuse envelope which corresponds to the size of the observed nebulosity. The total masses of the disk and envelope are 10{sup -4} and 2 M{sub Sun }, respectively, assuming a gas-to-dust ratio of 100. The evidence pointing toward a white dwarf merger or a final-helium-shell flash origin for R CrB is contradictory. The shell and the cometary knots are consistent with a fossil planetary nebula. Along with the fact that R CrB shows significant lithium in its atmosphere, this supports the final-helium-shell flash. However, the relatively high inferred mass of R CrB and its high fluorine abundance support a white dwarf merger.

79 ASTRONOMY AND ASTROPHYSICS↗

HYDROGEN FLUORIDE IN HIGH-MASS STAR-FORMING REGIONS

Hydrogen fluoride (HF) has been established to be an excellent tracer of molecular hydrogen in diffuse clouds. In denser environments, however, the HF abundance has been shown to be approximately two orders of magnitude lower. We present Herschel/HIFI observations of HF J = 1-0 toward two high-mass star formation sites, NGC 6334 I and AFGL 2591. In NGC 6334 I the HF line is seen in absorption in foreground clouds and the source itself, while in AFGL 2591 HF is partially in emission. We find an HF abundance with respect to H{sub 2} of 1.5 Multiplication-Sign 10{sup -8} in the diffuse foreground clouds, whereas in the denser parts of NGC 6334 I we derive a lower limit on the HF abundance of 5 Multiplication-Sign 10{sup -10}. Lower HF abundances in dense clouds are most likely caused by freezeout of HF molecules onto dust grains in high-density gas. In AFGL 2591, the view of the hot core is obstructed by absorption in the massive outflow, in which HF is also very abundant (3.6 Multiplication-Sign 10{sup -8}) due to the desorption by sputtering. These observations provide further evidence that the chemistry of interstellar fluorine is controlled by freezeout onto gas grains.

79 ASTRONOMY AND ASTROPHYSICS↗