Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic ensembles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Mechanism and kinetics of peptide partitioning into membranes

Partitioning properties of transmembrane (TM) polypeptide segments directly determine membrane protein folding, stability, and function, and their understanding is vital for rational design of membrane active peptides. However, direct determination of water-to-bilayer transfer of TM peptides has proved difficult. Experimentally, sufficiently hydrophobic peptides tend to aggregate, while atomistic computer simulations at physiological temperatures cannot yet reach the long time scales required to capture partitioning. Elevating temperatures to accelerate the dynamics has been avoided, as this was thought to lead to rapid denaturing. However, we show here that model TM peptides (WALP) are exceptionally thermostable. Circular dichroism experiments reveal that the peptides remain inserted into the lipid bilayer and are fully helical, even at 90 C. At these temperatures, sampling is 50 500 times faster, sufficient to directly simulate spontaneous partitioning at atomic resolution. A folded insertion pathway is observed, consistent with three-stage partitioning theory. Elevated temperature simulation ensembles further allow the direct calculation of the insertion kinetics, which is found to be first-order for all systems. Insertion barriers are Hin = 15 kcal/mol for a general hydrophobic peptide and 23 kcal/mol for the tryptophan-flanked WALP peptides. The corresponding insertion times at room temperature range from 8.5 s to 163 ms. High-temperature simulations of experimentally validated thermostable systems suggest a new avenue for systematic exploration of peptide partitioning properties.

59 BASIC BIOLOGICAL SCIENCES↗

Simulation of Compound Flooding Using River‐Ocean Two‐Way Coupled E3SM Ensemble on Variable‐Resolution Meshes

Abstract Coastal zone compound flooding (CF) can be caused by the interactive fluvial and oceanic processes, particularly when coastal backwater propagates upstream and interacts with high river discharge. The modeling of CF is limited in existing Earth System Models (ESMs) due to coarse mesh resolutions and one‐way coupled river‐ocean components. In this study, we present a novel multi‐scale coupling framework within the Energy Exascale Earth System Model (E3SM), integrating global atmosphere and land with interactively coupled river and ocean models using different meshes with refined resolutions near the coastline. To evaluate this framework, we conducted ensemble simulations of a CF event (Hurricane Irene in 2011) in a Mid‐Atlantic estuary. The results demonstrate that the novel E3SM configuration can reasonably reproduce river discharge and sea surface height variations. The two‐way river‐ocean coupling improves the representation of coastal backwater effects at the terrestrial‐aquatic interface that are caused by the combined actions of tide and storm surge during the CF event, thus providing a valuable modeling tool for better understanding the river‐estuary‐ocean dynamics in extreme events under climate change. Notably, our results show that the most significant CF impacts occur when the highest storm surge generated by a tropical cyclone meets with a moderate river discharge. This study highlights the state‐of‐the‐art advancements developed within E3SM for simulating multi‐scale coastal processes.

54 ENVIRONMENTAL SCIENCES↗

FY21 Progress Report: SRNL Analysis of ICCWR LCM and WAMS data for Corrosion and Cracking

The development of algorithms for machine learning and data analysis for the 3013 Surveillance Program is a collaborative effort by the Savannah River National Laboratory (SRNL) and the University of South Carolina (USC). For corrosion detection, Laser Confocal Microscope (LCM) or Wide Area 3D Measurement System (WAMS) data is extracted from large binary files, with software written to convert the data to physical attributes (e.g., height, color and grayscale values; all as functions of a location in a plane projection). A user-friendly Matlab Graphical User Interface (GUI) that reads data from either LCM or WAMS files was developed to integrate input data with software developed for processing and evaluation. The GUI can selectively download binary data, interrogate data attributes, label data, flag significant features, execute Machine Learning (ML) algorithms, output parameters for trained ML algorithms, report ML model accuracy with respect to labeled data, and generate graphical representations for various analyses. Features can be called out by user-specified thresholds, manual labeling or machine learning algorithms when they have been completed. The ability to rapidly label data is important because of the volume of data required for training machine learning algorithms. The GUI has the flexibility to allow addition of improved ML algorithms, methods for data visualization, and statistical computations. Statistical analyses via the GUI include areas of pits within a defined range of pit depths, correlations between Red-Green-Blue (RGB) or grayscale intensity and relative surface height, covariances between values associated with features, and feature histograms. The development of supervised machine learning algorithms, however, has been hindered by a lack of training data. The machine learning algorithms for crack identification are being refined but require improvements to the true positive rate for crack detection. This shortcoming is an artifact of the limited training data currently available, perhaps more so than the structure of the neural networks. At present, the best results are had from a consensus over an ensemble of randomly generated Deep Neural Network (DNN) or Convolutional Neural Network (CNN) algorithms. Although the consensus accuracy method has yielded optimum true positive and true negative rates in excess of 80%, additional validation testing is necessary. In addition to the suite of LCM data that was initially used, and which represents the majority of the work presented in this report, WAMS image data was also reviewed at a preliminary level. The review included a comparison between image resolution and dynamic range for each method. WAMS (ZON file) image data was found to have a pixel pitch of 3.69μm compared to 1 μm for the LCM (vk4 file) data, which implies a lower resolution for the WAMS images. Conversely, the ratio of dynamic range of the WAMS data to the LCM data was approximately 41:20 for height data, suggesting that information from WAMS should more accurately determine the depth of pits. At present, the significance of the greater dynamic range of the WAMS data relative to the LCM data has not yet been evaluated.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Classical thermal evaporation of clouds - An electrostatic analogy

The dynamics of the thermal evaporation of cool gas clouds embedded in a hot ionized gas is considered from a general point of view. The investigation is limited to isobaric small Mach number flow, the heat flux given by the diffusive electron Coulomb scattering formula, and no external heating sources. The cloud boundaries are assumed to change very slowly relative to the flow time. It is concluded that the classical mass-loss rate of any irrotational flow from a cloud ensemble is the product of known quantities and the electrostatic capacitance of an identical ensemble of grounded electrical conductors. Thus, the mass loss rate from an ensemble of clouds may be dramatically lower than the sum of the isolated cloud mass-loss rates. This rate is a lower bound to the mass-loss rate when vorticity is present. The mass-loss rate reaches its minimum value when the vorticity flow streamlines are isotherms.

Balbus, S. A.↗

Induced polarization restricts the conformational distribution of a light-harvesting molecular triad in the ground state

The light-harvesting molecular triad consisting of carotenoid polyene (C), diaryl-porphyrin (P) and pyrrole-fullerene (C60) is a donor–acceptor molecule capable of absorbing incident light in the visible range. Its ability to convert solar energy to electrical excitation and charge separation energy suggests a great potential in real-world applications. The ensemble of its conformations under ambient conditions varies widely according to its electronic state. In previous work, we applied a non-polarizable model to study the conformational distribution of the molecular triad in the ground and charge separated states. However, due to the lack of polarization, which imparts subtle changes in the charge distribution on atoms, molecular simulations fail to produce accurate average dipole moments. We developed the first polarizable model for a molecular triad to investigate the structural and dynamic properties of a molecular triad in the ground state in an explicit organic solvent, tetrahydrofuran (THF). We performed first-principles electronic structure calculations of the individual components in the triad as well as THF and then fit the partial atomic charges to the electrostatic potential using the i-RESP methodology. We validated these force field parameters by comparing the thermodynamic and dynamic properties obtained from molecular dynamics simulations with those from experiments. We enhanced the sampling of the triad conformations with replica exchange molecular dynamics simulations. We characterized the effects of induced polarization on the structural stability of the triad by analyzing the free energy landscapes constructed with polarizable force fields. Furthermore, by using principal component analysis, we found that the molecular triad conformations adopted a small range of torsional angles with induced polarization. The triad conformation solvated in polar solvent with a polarizable force field qualitatively agrees with that obtained from nuclear magnetic resonance spectroscopy.

Starovoytov, Oleg N.↗

Development of a wide bandwidth heterodyne dispersion interferometer for electron density measurement of atmospheric pressure plasmas

One of the challenges of electron density measurements of an atmospheric pressure plasma (APP) with a laser interferometer is the significant and unwanted phase shift caused by changes in the neutral gas density. These unwanted phase shifts can be mitigated and plasma density measured using an interferometer architecture called a dispersion interferometer (DI). A DI is composed of two nonlinear orientation patterned GaAs crystals for frequency doubling and measures the phase shift induced by a plasma in the interference signal between two second-harmonic beams. Measurement of plasma dynamics or a short plasma pulse in less than a millisecond is enabled with heterodyne detection in a DI using an acousto-optic cell with a frequency of 40 MHz. This heterodyne DI (HDI) is targeted to measure APPs in an electron density range of 10 20 –10 24 m −3 . Finally, the HDI achieves a line-integrated density resolution of 2 × 10 15 m −2 (a phase resolution of 0.005°) with a time constant of 1 μs using ensemble averaging techniques.

atmospheric pressure plasma↗

MARS: Malleable Actor-Critic Reinforcement Learning Scheduler

In this paper, we introduce MARS, a new scheduling system for HPC-cloud infrastructures based on a cost-aware, flexible reinforcement learning approach, which serves as an intermediate layer for next generation HPC-cloud resource manager. MARS ensembles the pre-trained models from heuristic workloads and decides on the most cost-effective strategy for optimization. A whole workflow application would be split into several optimizable dependent sub-tasks, then based on the pre- defined resource management plan, a reward will be generated after executing a scheduled task. Lastly, MARS updates the Deep Neural Network (DNN) model based on the reward. MARS is designed to optimize the existing models through reinforcement mechanisms. MARS adapts to the dynamics of workflow applications, selects the most cost-effective scheduling solution among pre-built scheduling strategies (backfilling, SJF, etc.) and self- learning deep neural network model at run-time. We evaluate MARS with different real-world workflow traces. MARS can achieve 5%-60% increased performance compare to state-of-the- art approaches.

Baheri, Betis↗

Scalable Cloning on Large-Scale GPU Platforms with Application to Time-Stepped Simulations on Grids

Cloning is a technique to efficiently simulate a tree of multiple what-if scenarios that are unraveled during the course of a base simulation. However, cloned execution is highly challenging to realize on large, distributed memory computing platforms, due to the dynamic nature of the computational load across clones, and due to the complex dependencies spanning the clone tree. In this paper, we present the conceptual simulation framework, algorithmic foundations, and runtime interface of CloneX, a new system we designed for scalable simulation cloning. It efficiently and dynamically creates whole logical copies of a dynamic tree of simulations across a large parallel system without full physical duplication of computation and memory. The performance of a prototype implementation executed on up to 1,024 graphical processing units of a supercomputing system has been evaluated with three benchmarks—heat diffusion, forest fire, and disease propagation models—delivering a speed up of over two orders of magnitude compared to replicated runs. Finally, the results demonstrate a significantly faster and scalable way to execute many what-if scenario ensembles of large simulations via cloning using the CloneX interface.

97 MATHEMATICS AND COMPUTING↗

Improving Parameterization of Entrainment Rate for Shallow Convection with Aircraft Measurements and Large-Eddy Simulation

This work examines the relationships of entrainment rate to vertical velocity, buoyancy, and turbulent dissipation rate by applying stepwise principal component regression to observational data from shallow cumulus clouds collected during the Routine AAF [Atmospheric Radiation Measurement (ARM) Aerial Facility] Clouds with Low Optical Water Depths (CLOWD) Optical Radiative Observations (RACORO) field campaign over the ARM Southern Great Plains (SGP) site near Lamont, Oklahoma. The cumulus clouds during the RACORO campaign simulated using a large eddy simulation (LES) model are also examined with the same approach. The analysis shows that a combination of multiple variables can better represent entrainment rate in both the observations and LES than any single-variable fitting. Three commonly used parameterizations are also tested on the individual cloud scale. A new parameterization is therefore presented that relates entrainment rate to vertical velocity, buoyancy and dissipation rate; the effects of treating clouds as ensembles and humid shells surrounding cumulus clouds on the new parameterization are discussed. Physical mechanisms underlying the relationships of entrainment rate to vertical velocity, buoyancy and dissipation rate are also explored.

54 ENVIRONMENTAL SCIENCES↗

Distinct responses of Asian summer monsoon to black carbon aerosols and greenhouse gases

Black carbon (BC) aerosols emitted from natural and anthropogenic sources induce positive radiative forcing and global warming, which in turn significantly affect the Asian summer monsoon (ASM). However, many aspects of the BC effect on the ASM remain elusive and largely inconsistent among previous studies, which is strongly dependent on different low-level thermal feedbacks over the Asian continent and the surrounding ocean. This study examines the response of the ASM to BC forcing in comparison with the effect of doubled greenhouse gases (GHGs) by analyzing the Precipitation Driver Response Model Intercomparison Project (PDRMIP) simulations under an extremely high BC level (10 times modern global BC emissions or concentrations, labeled BC×10) from nine global climate models (GCMs). The results show that although BC and GHGs both enhance the ASM precipitation minus evaporation (P–E; a 13.6 % increase for BC forcing and 12.1 % for GHGs from the nine-model ensemble, respectively), there exists a much larger uncertainty in changes in ASM P–E induced by BC than by GHGs. The summer P–E is increased by 7.7 % to 15.3 % due to these two forcings over three subregions, including East Asian, South Asian and western North Pacific monsoon regions. Further analysis of moisture budget reveals distinct mechanisms controlling the increases in ASM P–E induced by BC and GHGs. The change in ASM P–E by BC is dominated by the dynamic effect due to the enhanced large-scale monsoon circulation, whereas the GHG-induced change is dominated by the thermodynamic effect through increasing atmospheric water vapor. Radiative forcing of BC significantly increases the upper-level atmospheric temperature over the Asian region to enhance the upper-level meridional land–sea thermal gradient (MLOTG), resulting in a northward shift of the upper-level subtropical westerly jet and an enhancement of the low-level monsoon circulation, whereas radiative forcing of GHGs significantly increases the tropical upper-level temperature, which reduces the upper-level MLOTG and suppresses the low-level monsoonal circulation. Hence, our results indicate a different mechanism of BC climate effects under the extremely high BC level: that BC forcing significantly enhances the upper-level atmospheric temperature over the Asian region, determining ASM changes, instead of low-level thermal feedbacks as indicated by previous studies.

54 ENVIRONMENTAL SCIENCES↗

Constraints on dark matter from cosmic background anisotropies

The major stages in the linear evolution of the statistical ensemble of adiabatic fluctuations in radiation, baryons, and dark matter are discussed. If it is assumed that the distribution of light emitters (i.e., of galaxies) follows the distribution of mass (i.e., of dark matter), then universes dominated by massive collisionless relics of the Big Bang must have Omega larger than 0.2 h exp -4/3 to avoid exceeding the current observational limits on small-scale anisotropies in the microwave background. However, values of Omega of about 0.2 are indicated by dynamical studies of galaxy clustering. It is concluded that universes dominated by cold dark matter in which light traces mass are probably not viable models.

Bond, J. R.↗

High Ice Water Content Associated with a Darwin, Austrailia, Mesoscale Convective System

A mesoscale convective complex that occurred during the 2014 Darwin, Australia, flight campaign is examined via a three-dimensional, numerical simulation. The focus of the study is to better understand the presence and development of High Ice Water Content (HIWC) that was observed in the actual storm. Although peak values of ice water content may occur early in the storm lifetime, large areas of high concentrations expand with time and persist even when the storm tops begin to warm. The storm canopy which contains HIWC, has low radar reflectivity factor and is fed by an ensemble of regenerating thermal plumes. Detection via weather radar of the aviation hazard associated HIWC is challenging due the low values of radar reflectivity factor.

Aviation hazards↗

SAGE III/ISS Rapid Data Analysis Through Dashboarding with Jupyter Notebooks

Spaceborne remote sensing observations of Earth’s atmosphere produce significant quantities of data over the life of each mission. In the case of the Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) nearly four years of vertical profiles of atmospheric ozone, water vapor, and nitrogen dioxide concentrations as well as aerosol extinction coefficients have been released. The dichotomy of the desire for both long-term trends in the atmospheric state alongside the assessment of short-term impacts of major disruptive events such as volcanic eruptions and pyrocumulus injections requires agile tools to handle these cases in near real-time as new data are produced. The analysis landscape is further complicated by the desire to compare results between the numerous contemporary observations available for a given dataset. The SAGE III/ISS team has developed a suite of tools leveraging modern web-based frameworks allowing members to interact with a dashboard-style interface to load the data record, assess new profiles as they are generated and in ensemble, compare between species, and additionally add in measurements observed by other platforms as necessary. Leveraging a commonly packaged data format of NetCDF alongside the Python Jupyter Notebook framework, the data can be served to interested parties from an analysis server while still runnable on personal systems if required. This presentation illustrates the ecosystem developed by the SAGE III/ISS team, the applicability to measurements made by any limb-observing platform, and the benefit to transforming routine analyses into readily accessible dynamic plots. Frameworks currently exist at larger scales with projects such as GIOVANNI, and this illustration seeks to show that similar frameworks are accessible and possible within the local research environment while simultaneously unloading human processing cycles for more specialized analysis tasks.

Dashboarding↗

Benchmarking and parameter sensitivity of physiological and vegetation dynamics using the Functionally Assembled Terrestrial Ecosystem Simulator (FATES) at Barro Colorado Island, Panama

Plant functional traits determine vegetation responses to environmental variation, but variation in trait values is large, even within a single site. Likewise, uncertainty in how these traits map to Earth system feedbacks is large. We use a vegetation demographic model (VDM), the Functionally Assembled Terrestrial Ecosystem Simulator (FATES), to explore parameter sensitivity of model predictions, and comparison to observations, at a tropical forest site: Barro Colorado Island in Panama. We define a single 12-dimensional distribution of plant trait variation, derived primarily from observations in Panama, and define plant functional types (PFTs) as random draws from this distribution. We compare several model ensembles, where individual ensemble members vary only in the plant traits that define PFTs, and separate ensembles differ from each other based on either model structural assumptions or non-trait, ecosystem-level parameters, which include (a) the number of competing PFTs present in any simulation and (b) parameters that govern disturbance and height-based light competition. While single-PFT simulations are roughly consistent with observations of productivity at Barro Colorado Island, increasing the number of competing PFTs strongly shifts model predictions towards higher productivity and biomass forests. Different ecosystem variables show greater sensitivity than others to the number of competing PFTs, with the predictions that are most dominated by large trees, such as biomass, being the most sensitive. Changing disturbance and height-sorting parameters, i.e., the rules of competitive trait filtering, shifts regimes of dominance or coexistence between early- and late-successional PFTs in the model. Increases to the extent or severity of disturbance, or to the degree of determinism in height-based light competition, all act to shift the community towards early-successional PFTs. In turn, these shifts in competitive outcomes alter predictions of ecosystem states and fluxes, with more early-successional-dominated forests having lower biomass. It is thus crucial to differentiate between plant traits, which are under competitive pressure in VDMs, from those model parameters that are not and to better understand the relationships between these two types of model parameters to quantify sources of uncertainty in VDMs.

54 ENVIRONMENTAL SCIENCES↗

Single-Particle Emission Spectroscopy Resolves d-Hole Relaxation in Copper Nanocubes

Resolving the dynamics of photoexcited d-holes in metallic nanostructures is one step in the rational design of plasmonic photocatalysis. In this work, we track the creation and relaxation of charge carriers in catalytically important plasmonic copper nanocubes using single-particle spectroscopy. We show that interband transitions dominate the absorption and emission of 60–160 nm copper nanocubes, and in contrast to gold nanorods, the LSPR is less important to the emission. Furthermore, we uncover the plasmonic enhancement of emission hidden in ensemble measurements by resolving the size-dependent line shape and quantum yield. Quantum yield analysis reveals the energy dependence of d-hole lifetimes. We demonstrate that the effect of excitation energy on quantum yield is stronger in copper nanocubes than in gold nanocubes of equivalent size due to differences in the band structure and the probabilities of hole scattering. Finally, we establish that emission spectroscopy is useful to understand the physical chemistry of d-holes in plasmonic photocatalysts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Theories of Simplification and Scaling of Spatially Distributed Processes

The problem of scaling is at the heart of ecological theory, the essence of understanding and of the development of a predictive capability. The description of any system depends on the spatial, temporal, and organizational perspective chosen; hence it is essential to understand not only how patterns and dynamics vary with scale, but also how patterns at one scale are manifestations of processes operating at other scales. Evolution has shaped the characteristics of species in ways that result in scale displacement: Each species experiences the environment at its own unique set of spatial and temporal scales and interfaces the biota through unique assemblages of phenotypes. In this way, coexistence becomes possible, and biodiversity is enhanced. By averaging over space, time, and biological interactions, a genotype filters variation at fine scales and selects the arena in which it will face the vicissitudes of nature. Variation at finer scales is then noise, of minor importance to the survival and dynamics of the species, and consequently of minor importance in any attempt at description. In attempting to model ecological interactions in space, contributors throughout this book have struggled with a trade-off between simplification and "realistic" complexity and detail. Although the challenge of simplification is widely recognized in ecology, less appreciated is the intertwining of scaling questions and scaling laws with the process of simplification. In the context of this chapter simplification will in general mean the use of spatial or ensemble means and low-order moments to capture more detailed interactions by integrating over given areas. In this way, one can derive descriptions of the system at different spatial scales, which provides the essentials for the extraction of scaling laws by examination of how system properties vary with scale.

Levin, Simon A.↗

Unfolding of the Villin Headpiece Domain: Revealing Structural Heterogeneity with Time‐Resolved X‐Ray Solution Scattering and Markov State Modeling

Understanding protein folding pathways is crucial to deciphering the principles of protein structure and function. Here, the unfolding dynamics of the 35‐residue villin headpiece (HP35) and a norleucine‐substituted variant (2F4K) using a combination of experimental and computational techniques is investigated. Time‐resolved X‐ray solution scattering coupled with equilibrium molecular dynamics simulations and Markov state modeling reveals distinct unfolding mechanisms between the two variants: HP35 and 2F4K. Specifically, HP35 exhibits a two‐state unfolding process, whereas an intermediate state is identified for the 2F4K mutant. A Markov state model constructed from simulations is used to map atomic‐level transitions to experimental observations, providing insights into the role of sequence variations in modulating folding pathways. The findings underscore the importance of integrating experimental and computational approaches to unravel protein unfolding mechanisms between heterogenous structural ensembles.

Nijhawan, Adam K. [Department of Chemistry Northwe↗

The Effect of Internal Variability on Ocean Temperature Adjustment in a Low-Resolution CESM Initial Condition Ensemble

Due to its large heat capacity and circulation, the ocean contributes significantly to global heat uptake, global heat transport, spatial temperature patterns, and variability. Quantifying ocean heat uptake across different temporal and spatial scales is important to quantify Earth's climate response to anthropogenic warming. Here we evaluate ocean adjustment time scales from two different fully coupled climate model ensembles using the Community Earth System Model. Both ensembles use the same model version, anthropogenic and natural forcings, and coupling configurations, but we initialize the ensembles in two different ways: (1) sampling joint internal variability of the ocean–atmosphere system (unique atmosphere and ocean conditions) and (2) sampling the internal variability of the atmosphere only (unique atmosphere, identical ocean conditions). Uncertainty due to internal variability is used as a proxy to quantify the time scales of ocean temperature adjustment at different depths and basins in Community Earth System Model. Time scales of equilibration are longer in the deep ocean than the upper ocean, highlighting the vertical structure of dynamic adjustment. The Atlantic equilibrates on shorter time scales (82 years above 1,000 m, 140 years below 1,000 m) relative to the Pacific (106 years above 1,000 m, 444 years below 1,000 m) in Community Earth System Model due to the large North Atlantic Deep Water formation and strong overturning circulation in the Atlantic. These results have broad implications for analyzing internal climate variability, ocean adjustment, and drift in global coupled model experiments and intercomparisons.

54 ENVIRONMENTAL SCIENCES↗