Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Data analytics for leak detection in a subcritical boiler

For decades, boiler leaks have been the leading cause of forced outages in the coal-fired unit. The leak occurrences are currently escalating since the existing plants must satisfy faster-ramping rates to support grid operation. Data analytics including Principal Component Analysis, Canonical Variate, and Fisher Discriminant Analysis were combined for detecting and characterizing the leak in a commercial 650 MW subcritical coal-fired power plant. The combined approach was shown to be highly effective in the fault investigation that would not have been easily achieved by an individual technique. The variability in both training and validation datasets was first evaluated using PCA. Then, the CV-FDA was employed to discriminate among faults, and to categorize the processed data into two main groups: no-leak (0) and leak (1), providing the timeframe and location of the leak occurrence. Furthermore, about 8,014 observations from 81 process variables were initially included in the calculation, while the variable count was reduced to 4 with less than 1% misclassification rate in total observations. Finally, the leak was isolated in the waterwall section. Thus, the outcome of this research may provide early detection and isolation of faulty operations in the coal-fired power plant that involves a considerable number of process variables.

20 FOSSIL-FUELED POWER PLANTS↗

Characterization of a CMOS camera based film digitization platform for gated x-ray imaging diagnostics at the National Ignition Facility

Hardened gated x-ray detectors use photographic film as the data recording medium due to its low sensitivity to the high-yield neutron environments at the National Ignition Facility (NIF). The photographic film is digitized with a Photometric Data Systems (PDS) microdensitometer, which measures the film’s optical density. The PDS scanner is able to measure a dynamic range of 0–5 OD; however, raster scanning the film is time consuming and maintenance of the instrument is challenging due to legacy technology. Since film usage at NIF is expected to continue in the foreseeable future, a digitization platform that is faster and more maintainable would benefit the NIF’s current and future operations. Here, this work presents the characterization of the digital transitions (DT) atom, a CMOS camera-based digitization platform that records film data in a single image capture very quickly and has widely available user support. The preliminary results suggest that the DT atom is able to reconstruct exposures accurately enough to be a competitive alternative to the PDS Scanner.

47 OTHER INSTRUMENTATION↗

DUNE Software and High Performance Computing

DUNE, like other HEP experiments, faces a challenge related to matching execution patterns of our production simulation and data processing software to the limitations imposed by modern high-performance computing facilities. In order to efficiently exploit these new architectures, particularly those with high CPU core counts and GPU accelerators, our existing software execution models require adaptation. In addition, the large size of individual units of raw data from the far detector modules pose an additional challenge somewhat unique to DUNE. Here we describe some of these problems and how we begin to solve them today with existing software frameworks and toolkits. We also describe ways we may leverage these existing software architectures to attack remaining problems going forward. This whitepaper is a contribution to the Computational Frontier of Snowmass21.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New developments in cost modeling for the LHC computing

The increase in the scale of LHC computing during Run 3 and Run 4 (HL-LHC) will certainly require radical changes to the computing models and the data processing of the LHC experiments. The working group established by WLCG and the HEP Software Foundation to investigate all aspects of the cost of computing and how to optimise them has continued producing results and improving our understanding of this process. In particular, experiments have developed more sophisticated ways to calculate their resource needs, we have a much more detailed process to calculate infrastructure costs. This includes stud-ies on the impact of HPC and GPU based resources on meeting the computing demands. We have also developed and perfected tools to quantitatively study the performance of experiments workloads and we are actively collaborating with other activities related to data access, benchmarking and technology cost evolution. In this contribution we expose our recent developments and results and outline the directions of future work.

97 MATHEMATICS AND COMPUTING↗

PNNL-Predictive-Phenomics/ProteoMeter

ProteoMeter is a Python package that assists in the statistical analysis of global proteomics, protein post-translation modification (PTM), and limited proteolysis (LiP) data. It contains batch correction, normalization, and statistical testing methods, as well as functions that "roll up" peptide-level data to the single-site level. It has a robust user configuration system, allowing it to flexibly integrate different types of experiment designs. For basic usage, a simple configuration file provides the essential functionality. Advanced users have access to the entire statistical pipeline for fine-tuning analyses. Processed data is easily exported to many common spreadsheet and data-frame formats.

Rozum, Jordan [Pacific Northwest National Lab]↗

Graphical Environment Tools for Application to Gamma-Ray Energy Tracking Arrays (Final Report)

Highly segmented, position-sensitive germanium detector systems are being developed for nuclear physics research where traditional electronic signal processing with mixed analog and digital function blocks would be enormously complex and costly. Future systems will be constructed using pipelined processing of high-speed digitized signals as is done in the telecommunications industry. Techniques which provide rapid algorithm and system development for future systems are desirable. This project has used digital signal processing concepts and existing graphical system design tools to develop a set of re-usable modular functions and libraries targeted for the nuclear physics community. Researchers working with complex nuclear detector arrays such as the Gamma-Ray Energy Tracking Array (GRETA) have been able to construct advanced data processing algorithms for implementation in field programmable gate arrays (FPGAs) through application of these library functions using intuitive graphical interfaces.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Sparse sampling and reconstruction for electron and scanning probe microscope imaging

Systems and methods for conducting electron or scanning probe microscopy are provided herein. In a general embodiment, the systems and methods for conducting electron or scanning probe microscopy with an undersampled data set include: driving an electron beam or probe to scan across a sample and visit a subset of pixel locations of the sample that are randomly or pseudo-randomly designated; determining actual pixel locations on the sample that are visited by the electron beam or probe; and processing data collected by detectors from the visits of the electron beam or probe at the actual pixel locations and recovering a reconstructed image of the sample.

74 ATOMIC AND MOLECULAR PHYSICS↗

Apparatuses and methods for anomalous gas concentration detection

Embodiments of the disclosure are drawn to apparatuses and methods for anomalous gas concentration detection. A spectroscopic system, such as a wavelength modulated spectroscopy (WMS) system may measure gas concentrations in a target area. However, noise, such as speckle noise, may interfere with measuring relatively low concentrations of gas, and may lead to false positives. A noise model, which includes a contribution from a speckle noise model, may be used to process data from the spectroscopic system. An adaptive threshold may be applied based on an expected amount of noise. A speckle filter may remove measurements which are outliers based on a measurement of their noise. Plume detection may be used to determine a presence of gas plumes. Each of these processing steps may be associated with a confidence, which may be used to determine an overall confidence in the processed measurements/gas plumes.

Kreitinger, Aaron Thomas↗

Analysis of ZPPR-15 experimental data for VTR software validation

As part of the Versatile Test Reactor (VTR) program, extensive validation work is being performed to demonstrate the fidelity of the Argonne Reactor Code (ARC) software package presently used for the core design studies. It is anticipated that this software will be also used for initial operations although additional software may be introduced at a later time to supplement or replace some components. The validation work was focused on accumulating reactor models that are consistent with the VTR and thus can be used to validate the accuracy of predictions made by the software used to design and operate the VTR. The U.S. does not have any active experimental facilities that can neutronically mockup the VTR core design. However, in the past, the U.S. had extensive experimental facilities for fast reactor neutronics. In that regard, the ZPPR-15 experiments carried out at ANL during the 1980s work best because the fuel form is closest to the VTR design, there is a considerable amount of processed data available for use, and existing staff are already familiar with the experimental machine and measurements. Because of previous collaborative work, many of the ZPPR-15 loadings of interest have already been processed into MCNP and preliminary ARC models, and a full uncertainty quantification has already been completed for many of the ZPPR-15 measurements. This manuscript covers the recent analysis work on the ZPPR-15 experiments and compares it with the experimental results. With respect to the ARC software components, this manuscript focuses on validation of the MC 2 , DIF3D and GAMSOR using the ZPPR-15 experimental data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Robust Vector BOTDA Signal Processing with Probabilistic Machine Learning

This paper presents a novel probabilistic machine learning (PML) framework to estimate the Brillouin frequency shift (BFS) from both Brillouin gain and phase spectra of a vector Brillouin optical time-domain analysis (VBOTDA). The PML framework is used to predict the Brillouin frequency shift (BFS) along the fiber and to assess its predictive uncertainty. We compare the predictions obtained from the proposed PML model with a conventional curve fitting method and evaluate the BFS uncertainty and data processing time for both methods. The proposed method is demonstrated using two BOTDA systems: (i) a BOTDA system with a 10 km sensing fiber and (ii) a vector BOTDA with a 25 km sensing fiber. The PML framework provides a pathway to enhance the VBOTDA system performance.

47 OTHER INSTRUMENTATION↗

Metrology for femtosecond pulsed x-ray heating in diamond anvil cell experiments at the European XFEL: Revisiting the iron phase diagram up to 150 GPa

The development of pulsed intense x-ray sources, such as free electron laser, offers new avenues for high pressure experiments. Here, we study the feasibility and metrology of x-ray heating in diamond anvil cells at the European x-ray free electron laser. This method enables one to volumetrically heat the sample while inhibiting chemical migration and probing the crystallographic structure of the sample throughout the heating with a high repetition rate. We focus our study on iron, whose phase diagram is well established up to 100 GPa, to explore the possibilities and limitations of this technique. We volumetrically heat iron samples at starting pressures ranging from 10 to 138 GPa, using the x-ray beam pulsed at 4.5 MHz in a serial pump-and-probe experimental design. Experimental challenges arise from temperature gradients within the sample, changes in temperature at the 100 ns timescale, the difficulty of direct temperature estimates, the effect of thermal pressure, and the presence of metastable crystallites due to rapid cycles of heating and cooling. Hence, we develop a multi-crystal-like data processing method that allows us to account for sample heterogeneity in probed conditions. We then calibrate our measurements using known physical properties of iron under pressure. Thermal pressure in our experiments increases from 4% of the isochoric prediction at 10 GPa to 23% at 138 GPa, and we show that our data are in agreement with most previous observations of iron in this pressure range. The method can now be implemented at higher pressures and temperatures and on materials with unknown phase diagrams.

Materials science↗

Taking a look at the calibration of a CCD detector with a fiber-optic taper

At the Structural Biology Center beamline 19BM, located at the Advanced Photon Source, the operational characteristics of the equipment are routinely checked to ensure they are in proper working order. After performing a partial flat-field calibration for the ADSC Quantum 210r CCD detector, it was confirmed that the detector operates within specifications. However, as a secondary check it was decided to scan a single reflection across one-half of a detector module to validate the accuracy of the calibration. The intensities from this single reflection varied by more than 30% from the module center to the corner of the module. Redistribution of light within bent fibers of the fiber-optic taper was identified to be a source of this variation. As a result, the degree to which the diffraction intensities are corrected to account for characteristics of the fiber-optic tapers depends primarily upon the experimental strategy of data collection, approximations made by the data processing software during scaling, and crystal symmetry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Global- and Local-Scale High-Resolution Event Catalogs for Algorithm Testing

During the development of new seismic data processing methods, the verification of potential events and associated signals can present a nontrivial obstacle to the assessment of algorithm performance, especially as detection thresholds are lowered, resulting in the inclusion of significantly more anthropogenic signals. Here, we present two 14 day seismic event catalogs, a local–scale catalog developed using data from the University of Utah Seismograph Stations network, and a global–scale catalog developed using data from the International Monitoring System. Each catalog was built manually to comprehensively identify events from all sources that were locatable using phase arrival timing and directional information from seismic network stations, resulting in significant increases compared to existing catalogs. Here, the new catalogs additionally contain challenging event sequences (prolific aftershocks and small events at the detection and location threshold) and novel event types and sources (e.g., infrasound only events and long–wall mining events) that make them useful for algorithm testing and development, as well as valuable for the unique tectonic and anthropogenic event sequences they contain.

58 GEOSCIENCES↗

Experimental Unevaluated Nuclear Data List (XUNDL)

Contains nuclear structure and decay data from published articles. Data include nuclear level properties, such as energy, half-life, decay modes, spin and parity, as well as energy and intensity for radiation types such as gammas, alphas, betas and neutrons. For articles published in Physical Review C and the European Physical Journal, compilation takes place during the article submission process. Data from approximately 250 articles are added per year. All the compilation effort is supported by the US Nuclear Data Program and coordinated by the National Nuclear Data Center at Brookhaven National Laboratory, which is also responsible for its web dissemination.

Basic Nuclear Research, nuclear structure and deca↗

Multiyear Analysis of the Fate and Transport of Contaminated Soils at Plutonium Valley and the Smoky Site, Nevada National Security Site

Desert Research Institute (DRI) has collected approximately 10 years of atmospheric and hydrologic data at Plutonium Valley and the Smoky Site on the Nevada National Security Site to identify the potential for radionuclide-contaminated soils to be transported via wind and water. Plutonium preferentially binds to finer soil particles (Shinn et al., 1993; Miller et al., 2015), which can be transported through erosion processes. Data collected by DRI are used to determine the mechanisms and thresholds that result in the transport of radionuclide-contaminated soils, and climate model projections are used to understand how these mechanisms may change in the future. This work will help identify the parameters and threshold conditions that should be incorporated into post-closure monitoring plans for these and other Soils Corrective Action Unit (CAU) sites.

54 ENVIRONMENTAL SCIENCES↗

An Automatic Processing Framework for In Situ Determination of Ecohydrological Root Water Content by Ground-Penetrating Radar

This report concerns Root water content (RWC) as a vital component in water flux in soil-plant-atmosphere continuum. Knowledge of RWC helps to better understand the root function and the soil-root interaction and improves water cycle modeling. However, due to the lack of appropriate methods, field monitoring of RWC is seriously constrained. In this study, we used ground-penetrating radar (GPR), a common geophysical technique, to characterize RWC of coarse roots noninvasively. An automatic GPR data processing framework was proposed to (1) identify hyperbolic root reflections and locate roots in GPR images and (2) extract waveform parameters from the reflected wave of identified roots. These waveform parameters were then used to establish an empirical model and a semiempirical model to determine RWC. We validated the developed models using GPR root data at three antenna center frequencies (500 MHz, 900 MHz, and 2 GHz) that were produced from simulation experiments (with RWC ranging from 70% to 150%) and field experiments in sandy soils (with RWC ranging from 66% to 144%). Our results show that both the empirical and the semiempirical models achieved a good performance in estimating RWC with similar accuracy, i.e., the prediction error [root-mean-square error (RMSE)] was less than 8% for the simulation data and 12% for the field data. For both models, the accuracy of RWC estimation was the highest when applied to 2-GHz data. This study renders a new opportunity to determine RWC under field conditions that enhances the application of GPR for root study and the understanding and modeling of ecohydrology in the rhizosphere.

54 ENVIRONMENTAL SCIENCES↗

Robust inference of ecosystem soil water stress from eddy covariance data

Eddy covariance data are invaluable for determining ecosystem water use strategies under soil water stress. However, existing stress inference methods require numerous subjective data processing and model specification assumptions whose effect on the inferred soil water stress signal is rarely quantified. These uncertainties may confound the stress inference and the generalization of ecosystem water use strategies across multiple sites and studies. In this research, we quantify the sensitivity of soil water stress signals inferred from eddy covariance data to the prevailing data and modeling assumptions (i.e., their robustness) to compile a comprehensive list of sites with robust soil water stress signals and assess the performance of current stress inference methods. To accomplish this, we identify the most prevalent assumptions from the literature and perform a digital factorial experiment to extract probability distributions of plausible soil water stress signals and model performance at 151 FLUXNET2015 and AmeriFlux-FLUXNET sites. Here, we develop a new framework that summarizes these probability distributions to classify and rank the robustness of each site’s soil water stress signal, which we display with a user-friendly heat map. We estimate that only 5%–36% of sites exhibit a robust soil water stress signal due to deficient model performance and poorly constrained ecosystem water use parameters. We also find that the lack of robustness is site-specific, which undermines grouping stress signals by broad ecosystem categories or comparing results across studies with differing assumptions. Lastly, existing stress inference methods appear better suited for eddy covariance sites with grass/annual vegetation. Our findings call for more careful and consistent inference of ecosystem water stress from eddy covariance data.

54 ENVIRONMENTAL SCIENCES↗

WE-D-BRF-04: Experimental Investigations On Ion Radiography with Beam Scanning Using a Range Telescope

Purpose: Ion beams exhibit a finite range and an inverted depth-dose profile, the Bragg peak. These favorable properties allow superior tumordose conformality, but introduce sensitivity to range uncertainties. Hence, imaging techniques play an increasingly important role to support the treatment planning and the in-vivo monitoring of the actual ion beam treatment. Methods: This work presents the experimental investigations carried out to address the feasibility of ion transmission imaging at the Heidelberg Ion Therapy center using an active raster scanning beam delivery system and a prototype range telescope set-up based on a stack of 61 parallel-plate ionization chambers (PPIC) interleaved with 3 mm absorber plates of PMMA. Results: An extensive characterization of the set-up in terms of beam parameters and settings of the read-out electronics was performed and results will be presented. A data processing method to increase the range resolution (MIRR) of the PPIC stack was developed. In this approach, the position of the maximum of the Bragg curve is deduced from the ratio of measured signals in adjacent PPIC channels. MIRR evaluation is based on Bragg curves obtained from Monte Carlo simulations and validated with experimental data acquired with the PPIC stack using ion beams. MIRR was applied to the carbon ion radiography of an anthropomorphic Alderson head phantom yielding a resolution of 0.8 mm water equivalent thickness (WET) compared to the nominal value of 3.495 mm WET given by the thickness of the absorber slabs in the PPIC stack. An absolute comparison of the Alderson phantom carbon ion transmitted image with an X-ray digitally reconstructed radiography, both converted into WET, will also be shown. Conclusion: The obtained results are very promising and motivate further developments of the system towards an eventual clinical use.This work is supported by the German Research Foundation and the German Academic Exchange Service. This work is supported by the German Research Foundation (DFG) and the German Academic Exchange Service (DAAD)

07 ISOTOPE AND RADIATION SOURCES↗