Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOPPLER EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

AGN Black Hole Masses from Reverberation Mapping

Emission-line variability data on bright AGNs indicates that the central objects in these sources have masses in the million to few-hundred million solar mass range. The time-delayed response of the emission lines to continuum variations can be used to infer the size of the line-emitting region via light travel-time arguments. By combining these sizes with the Doppler widths of the variable part of the emission lines, a virial mass estimate can be obtained. For three especially well-studied sources, NGC 5548, NGC 7469, and 3C 390.3, data on multiple emission lines can be used to test the virial hypothesis. In each of these cases, the response time of the various emission lines is anticorrelated with the line width, with the dependence as expected for gravitationally bound motion of the line-emitting clouds, i.e., that the square of the Doppler line width is inversely proportional to the emission-line time delay. Virial masses based on the Balmer lines have now been measured for about three dozen AGNs. Systematic effects currently limit the accuracy of these masses to a factor of several, but characteristics of the radius-luminosity and mass-luminosity relationships for AGNs are beginning to emerge.

Peterson, B. M.↗

JRC-IRMM/ORNL Collaboration on Nuclear Data for Nuclear Criticality Safety - 14486

Concerns about using cross sections recommended in the main evaluated data libraries (i.e. ENDF/B, JEFF and JENDL) for nuclear criticality calculations have been a prime motivator for new cross section measurements. The measurements and evaluations discussed in this work are part of a collaboration between the Oak Ridge National Laboratory (ORNL) and the Institute for Reference Material and Measurements of the Joint Research Center (JRC-IRMM) of the European Commission (EC). They are performed in response to the US Nuclear Criticality Safety Program (NCSP) data needs. In particular, the NCSP five-year plan encompasses a listing of elements that have been identified for measurements and evaluations to address issues on criticality safety applications. This listing is based on data deficiency concerns in practical applications that are conveyed by criticality safety practitioners. In general these deficiencies are obtained through the analysis of benchmark calculations. A wealth of evaluations in the main libraries were derived from results of measurements made with poor time-of-flight resolution, and also the description of some data in the neutron energy range above several tens of keV is crude. This impacts both the resolved and unresolved resonance region, and leads to bias effects when resonance structures play an important role. As a consequence only average corrections can be applied in calculations for nuclear criticality calculations where self-shielding, multiple scattering, or Doppler broadening are important. This can lead to erroneous results. Furthermore, many evaluations for nuclides having small neutron-capture cross sections show erroneously high cross sections because the influence of the neutron sensitivity of the old measurement systems was underestimated. Although their neutron capture cross sections are small, these nuclides, if occurring in large amounts, can be important absorbers in criticality calculations, so an accurate determination of these cross sections is required. Over the last seven years the JRC-IRMM/ORNL collaboration has produced many neutron induced cross section data using the Geel Electron Linear Accelerator (GELINA) neutron time-of-flight facility. This facility is ideally suited to measure total, fission and capture cross sections in the energy range from 1 eV to ∼600 keV, which is important for nuclear criticality calculations. In this paper the facility and experimental set-ups at GELINA will be described together with the data reduction and analysis procedures which result in experimental observables including their full covariance information. The importance of combining transmission and partial cross section data will be emphasized. We will give a list of the measured nuclides and discuss the impact of the resulting data and evaluations. (authors)

42 ENGINEERING↗

Effects of Sustained Low-Level Elevations of Carbon Dioxide on Cerebral Blood Flow and Autoregulation of the Intracerebral Arteries in Humans

Cerebral blood flow velocity (CBFv) was measured by insonating the middle cerebral arteries of 4 subjects using a 2 Mhz transcranial Doppler. Ambient CO2 was elevated to 0.7% for 23 days in the first study and to 1.2% for 23 days in the same subjects in the second study. By non-parametric testing CBFv was elevated significantly by +35% above pre-exposure levels during the first 1-3 days at both exposure levels after which CBFv progressively readjusted to pre-exposure levels. Despite similar CBFv responses, headache was only reported during the initial phase of exposure to 1.2% CO2. Vascular reactivity to CO2 assessed by rebreathing showed a similar pattern with the CBFv increases early in the exposures being greater than those elicited later. An increase in metabolic rate of the visual cortex was evoked by having the subjects open and close their eyes during a visual stimulus. Evoked CBFv responses measured in the posterior cerebral artery were also elevated in the first 1-3 days of both studies returning to pre-exposure levels as hypercapnia continued. Cerebral vascular autoregulation assessed by raising head pressure during 10 deg head-down tilt both during the low-level exposures and during rebreathing was unaltered. There were no changes in the retinal microcirculation during serial fundoscopy studies. The time-dependent changes in CO2 vascular reactivity might be due either to retention of bicarbonate in brain extracellular fluid or to progressive increases in ventilation, or both. Cerebral vascular autoregulation appears preserved during chronic exposure to these levels of ambient CO2.

Sliwka, U.↗

Influence of simulated weightlessness on maximal oxygen uptake of untrained rats

The purpose of this study was to determine the effect of hindlimb suspension on maximal oxygen uptake of rodents. Male Sprague-Dawley rats were assigned to head-down (HD) suspension, horizontal (HOZ) suspension, or cage (C) control for 6-9 days. Rats were tested for maximal oxygen uptake before and after surgical instrumentation (Doppler flow probes, carotid and jugular cannulae), and after suspension. Body weight was significantly decreased after suspension in both HD and HOZ groups, but was significantly increased in the C group. Absolute maximal O2 uptake (ml/min) was not different in the C group. However, because of their increased weight, relative maximal O2 uptake (ml/min per kg) was significantly reduced. In contrast, both relative and absolute maximal O2 uptake were significantly lower, following suspension, for the HD and HOZ groups. These preliminary results support the use of hindlimb suspension as an effective model to study the mechanism(s) of cardiovascular deconditioning.

Overton, J. Michael↗

MONK10: A Monte Carlo Code for Criticality Analysis - 14574

The MONK{sup R} code, if we include its predecessor GEM, has now been in use for 50 years. It is a Monte Carlo code for nuclear criticality and reactor physics analyses which is used extensively in the UK nuclear industry and worldwide. In 2014 a major new version of the code, MONK10A, was released introducing many new features; these are described with example applications presented where appropriate. Experience with MONK9A models indicates that MONK10A has increased run-time performance for all cases and on average runs 2.4 times faster. New geometry options include the direct import of CAD generated models using the new IGES body, POLY body, TETMESH Hole and TETMESH Zone features. Example calculations for a selection of CAD import options are presented and compared with the intrinsic MONK geometry representation, with relative merits discussed. New Features are included to assist with the modeling of distributed parameters; such features include Unified Tally (UT), Action Tallies (AT) in UT and Shannon entropy. The latter is useful in assessing the convergence of distributed parameters, such as scalar neutron flux. As such it is an important tool in determining the appropriate point to stop settling and begin scoring stages in a Monte Carlo simulation. The utility of UT, AT-in-UT and Shannon entropy is demonstrated using calculations employing the new CAD import geometry options. Runtime Doppler broadening is included to allow accurate representation of temperature distributions within models. Example calculations which further demonstrate UT and AT-in-UT are presented for different bodies at different temperatures to evaluate the effects of temperature differences on k-effective and reaction rates. The MONK10A code was issued with a new set of continuous energy and group nuclear data libraries. These include JEFF3.1, JEFF3.1.1, JEFF 3.1.2, ENDF/B-VII.0 and CENDL 3.1 libraries. The inclusion of a range of libraries allows the user to evaluate the impact of different international nuclear data evaluations on their results and an example is provided to illustrate the differences that can arise from the use of different nuclear data evaluations. The code was also issued with a new version of the VisualWorkshop IDE to allow easy construction and editing of input decks, running of calculations and display of geometry and results. Examples are provided of the geometry and results display and showing how results can be superimposed upon the geometry. (authors)

42 ENGINEERING↗

Conceptual study on using Doppler backscattering to measure magnetic pitch angle in tokamak plasmas

We introduce a new approach to measure the magnetic pitch angle profile in tokamak plasmas with Doppler backscattering (DBS), a technique traditionally used for measuring flows and density fluctuations. The DBS signal is maximised when its probe beam's wavevector is perpendicular to the magnetic field at the cutoff location, independent of the density fluctuations [Hillesheim \emph{et al} 2022 \emph{Nucl. Fusion} \textbf{55} 073024]. Hence, if one could isolate this effect, DBS would then yield information about the magnetic pitch angle. By varying the toroidal launch angle, the DBS beam reaches cutoff with different angles with respect to the magnetic field, but with other properties remaining similar. Hence, the toroidal launch angle which gives maximum backscattered power is thus that which is matched to the pitch angle at the cutoff location, enabling inference of the magnetic pitch angle. We performed systematic scans of the DBS toroidal launch angle for repeated DIII-D tokamak discharges. Experimental DBS data from this scan were analysed and combined with Gaussian beam-tracing simulations using the Scotty code [Hall-Chen \emph{et al} 2022 \emph{Plasma Phys. Control. Fusion} \textbf{64} 095002]. The pitch-angle inferred from DBS is consistent with that from magnetics-only and motional-Stark-effect-constrained (MSE) equilibrium reconstruction in the edge. In the core, the pitch angles from DBS and magnetics-only reconstructions differ by one to two degrees, while simultaneous MSE measurements were not available. The uncertainty in these measurements was under a degree; we show that this uncertainty is primarily due to the error in toroidal steering, the number of toroidally separated measurements, and shot-to-shot repeatability. We find that the error of pitch-angle measurements can be reduced by optimising the poloidal launch angle and initial beam properties. Since DBS has high spatial and temporal resolutions, is non-perturbative, does not require neutral beams, and is likely robust to neutron damage of and debris on the first mirrors, using DBS to measure the pitch angle in future fusion energy systems is especially appealing.

beam tracing↗

Study of software application of airborne laser doppler system for severe storms measurement

Significant considerations are described for performing a Severe Storms Measurement program in real time. Particular emphasis is placed on the sizing and timing requirements for a minicomputer-based system. Analyses of several factors which could impact the effectiveness of the system are presented. The analyses encompass the problems of data acquisition, data storage, data registration, correlation, and flow field computation, and error induced by aircraft motion, moment estimation, and pulse integration.

Alley, P. L.↗

Orbital Effects on Mercury's Escaping Sodium Exosphere

We present results from coronagraphic imaging of Mercury's sodium tail over a 7 deg field of view. Several sets of observations made at the McDonald Observatory since May 2007 show a tail of neutral sodium atoms stretching more than 1000 Mercury radii (R(sub m)) in length, or a full degree of sky. However, no tail was observed extending beyond 120 R(sub m) during the January 2008 MESSENGER Fly-by period, or during a similar orbital phase of Mercury in July 2008. Large changes in Mercury's heliocentric radial velocity cause Doppler shifts about the Fraunhofer absorption features; the resultant change in solar flux and radiation pressure is the primary cause of the observed variation in tail brightness. Smaller fluctuations in brightness may exist due to changing source rates at the surface, but we have no explicit evidence for such changes in this data set. The effects of radiation pressure on Mercury's escaping atmosphere are investigated using seven observations spanning different orbital phases. Total escape rates of atmospheric sodium are estimated to be between 5 and 13 x 10(exp 23) atoms/s and show a correlation to radiation pressure. Candidate sources of Mercury's sodium exosphere include desorption by UV sunlight, thermal desorption, solar wind channeled along Mercury's magnetic field lines, and micro-meteor impacts. Wide-angle observations of the full extent of Mercury's sodium tail offer opportunities to enhance our understanding of the time histories of these source rates.

Schmidt, Carl A.↗

Incorporating Beam Attenuation Calculations into an Integrated Data Analysis Model for Ion Effective Charge

Here, we have created a forward model for charge-exchange impurity density measurements that incorporates neutral beam attenuation measurements self-consistently for the purpose of determining the ion-effective charge Z eff . The model is constructed within an integrated data analysis framework to include a self-consistent calculation of neutral beam attenuation due to multiple impurity species into the measurement of a single impurity density. The model includes measurements of the beam Doppler-shift spectrum and shine-through particle flux to determine the neutral beam particle density which is attenuated by ion collisions. Synthetic data are generated from the diagnostic forward model using statistical and calibration uncertainties. These “noisy” data are used in the analysis to evaluate how accurately Z eff is determined. Methods of experimental design are employed to calculate the information gained from different diagnostic combinations. The analysis shows that while attenuation measurements alone do not provide a unique impurity density measurement in the case of a multispecies inhomogeneous plasma, they do provide an effective measurement of the Z eff profile and place constraints on the impurity density profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced resonant acceleration of electrons from intense laser interaction with density-attenuating plasma

An enhanced resonant acceleration scheme for electrons by intense circularly polarized laser pulse in a plasma with slowly attenuating density is proposed. As it propagates, the phase velocity and Doppler-shifted frequency of the laser both gradually decrease, so that the electrons moving in the combined laser and spontaneous fields can retain betatron resonance for a rather long time and effectively acquire energy from the laser. The theoretical analysis is verified by test-particle numerical calculations. It is shown that well-collimated GeV electron beams with very low beam divergence can be produced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Feasibility of main thermal ion heating by ICRF waves using a top launcher in a tokamak with deuterium–tritium plasmas

A scenario of ion cyclotron range of frequency (ICRF) wave injection from a top launcher is proposed as an efficient and direct heating method for thermal deuterium ions in deuterium–tritium tokamak plasmas. Positioned between the tritium cyclotron layer and ion–ion hybrid layer, the top launcher allows effective wave penetration to the ion–ion hybrid layer and enables significant power transfer to thermal deuterium. This is achieved through favorable wave polarization for fundamental cyclotron damping. There is a Doppler broadening around the cyclotron resonance and this overlaps with the ion–ion hybrid layer. Low toroidal mode numbers and ion temperature in the range of 5–20 keV are favorable for enhancing the main ion damping relative to electron damping. In contrast to the neutral beam injection, which penetration strongly depends on machine size and plasma density, the proposed ICRF-based direct ion heating scenario is shown to be scalable and applicable to both larger and smaller tokamak devices within practical constraints.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

HELIOSEISMIC RESPONSE TO THE X2.2 SOLAR FLARE OF 2011 FEBRUARY 15

The X2.2-class solar flare of 2011 February 15 produced a powerful 'sunquake' event, representing a helioseismic response to the flare impact in the solar photosphere, which was observed with the Helioseismic and Magnetic Imager (HMI) instrument on board the Solar Dynamics Observatory (SDO). The impulsively excited acoustic waves formed a compact wave packet traveling through the solar interior and appearing on the surface as expanding wave ripples. The initial flare impacts were observed in the form of compact and rapid variations of the Doppler velocity, line-of-sight magnetic field, and continuum intensity. These variations formed a typical two-ribbon flare structure, and are believed to be associated with thermal and hydrodynamic effects of high-energy particles heating the lower atmosphere. The analysis of the SDO/HMI and X-ray data from RHESSI shows that the helioseismic waves were initiated by the photospheric impact in the early impulsive phase, observed prior to the hard X-ray (50-100 keV) impulse, and were probably associated with atmospheric heating by relatively low-energy electrons ({approx}6-50 keV) and heat flux transport. The impact caused a short motion in the sunspot penumbra prior to the appearance of the helioseismic wave. It is found that the helioseismic wave front traveling through a sunspot had a lower amplitude and was significantly delayed relative to the front traveling outside the spot. These observations open new perspectives for studying the flare photospheric impacts and for using the flare-excited waves for sunspot seismology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiparameter Constraints on Empirical Infrasound Period-Yield Relations for Bolides and Implications for Planetary Defense

How effective are methods for estimating bolide energies from infrasound signal period-yield relationships? A single global period–energy relation can obscure significant variability introduced by parameters such as the atmospheric Doppler wind profile and the bolide’s energy deposition profile as a function of altitude. Bolide speed, entry angle, burst altitude, and multiepisode fragmentation may all play a role in defining the detected period of the shockwave. By leveraging bolide light-curve data from the Center for Near Earth Object Studies, we re-examined the period–energy relation as a function of these parameters. Through a bootstrap approach, we show that various event subsets can deviate from widely cited period–energy models and we identify which specific conditions most strongly reshape the period–energy scaling. The results define both the fidelity and reliability of period–energy relations when no additional data beyond the infrasound record is available and improve the outcome when supporting data from bolide trajectories and light curves are included. Ultimately, these findings expand the scope of earlier models, providing a nuanced and robust framework for infrasound-only yield estimation under a range of bolide scenarios.

Planetary science↗

The equatorial rotation velocity of the photosphere is measured to be the same as sunspots

The equatorial rotation rate of the photosphere was measured at effect data. It was found that scattered light has a large influence and must be taken into account properly. When this was done it was found that the rotation rate from Doppler shifts agreed very well with the rate found for sunspots. Short-term fluctuations in rotation rate (i.e. from day to day) were less than plus or minus 15 m/s and were thus within observational errors.

Svalgaard, L.↗

Potential scientific research which will benefit from an airborne Doppler lidar measurement system

Areas of research which can be significantly aided by the Doppler lidar airborne system are described. The need for systematic development of the airborne Doppler lidar is discussed. The technology development associated with the systematic development of the system will have direct application to satellite systems for which the lidar also promises to be an effective instrument for atmospheric research.

Frost, W.↗

Accuracy of vertical air motions from nadir-viewing Doppler airborne radars

This paper presents an analysis of the uncertainties expected in vertical velocities using a vertically pointing airborne Doppler radar which has a nadir or zenith-pointing beam. To examine the expected uncertainty, the Doppler velocity equation for a moving platform is derived and it is applied to cases of nadir-fixed and stabilized beams. The main emphasis of the paper is on the effect of platform stability on the deduced vertical air motions and it is shown that the antenna must be stabilized to obtain desired accuracy in the vertical velocity measurements.

Heymsfield, Gerald M.↗

Modeling boot-shaped coronal holes using SOHO-MDI magnetic measurements

The boot-shaped coronal hole observed between the 22 and 30 August 1996, reproduced by rigidly rotating the data computed on 27 August with the rotation rate near the solar equator, is discussed. The data were acquired by the Michelson Doppler imager (MDI) onboard the Solar and Heliospheric Observatory (SOHO). The results suggest that change in size and shape of the holes observed during the period is caused by the projection effect. It was found that the whole solar observational synoptic chart may be used to approximately reproduce boot-shaped holes in solar minimum.

Zhao, X. P.↗

Development of Prototype Micro-Lidar using Narrow Linewidth Semiconductor Lasers for Mars Boundary Layer Wind and Dust Opacity Profiles

We have developed a compact Doppler lidar concept which utilizes recent developments in semiconductor diode laser technology in order to be considered suitable for wind and dust opacity profiling in the Mars lower atmosphere from a surface location. The current understanding of the Mars global climate and meteorology is very limited, with only sparse, near-surface data available from the Viking and Mars Pathfinder landers, supplemented by long-range remote sensing of the Martian atmosphere. The in situ measurements from a lander-based Doppler lidar would provide a unique dataset particularly for the boundary layer. The coupling of the radiative properties of the lower atmosphere with the dynamics involves the radiative absorption and scattering effects of the wind-driven dust. Variability in solar irradiance, on diurnal and seasonal time scales, drives vertical mixing and PBL (planetary boundary layer) thickness. The lidar data will also contribute to an understanding of the impact of wind-driven dust on lander and rover operations and lifetime through an improvement in our understanding of Mars climatology. In this paper we discuss the Mars lidar concept, and the development of a laboratory prototype for performance studies, using, local boundary layer and topographic target measurements.

Menzies, Robert T.↗