Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOMAIN STRUCTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Extensive domain wall motion and deaging resistance in morphotropic 0.55Bi(Ni{sub 1/2}Ti{sub 1/2})O{sub 3}–0.45PbTiO{sub 3} polycrystalline ferroelectrics

Domain wall motion is known as a major source of extrinsic contributions to the dielectric and piezoelectric properties of ferroelectric materials. In the present work, we report the extent of non-180° domain wall motion during strong and weak electric field amplitudes in situ using time-resolved, high-energy X-ray diffraction in the ferroelectric morphotropic phase boundary composition 0.55Bi(Ni{sub 1/2}Ti{sub 1/2})O{sub 3}–0.45PbTiO{sub 3} (BNT-45PT). After application of strong electric fields, two phases are shown to coexist. In the tetragonal phase of this material, the extent of 90° domain wall motion is significant and the domain alignment is nearly saturated. Weak (subswitching) cyclic electric fields are then also shown to induce domain wall motion. Deaging, or the progressive loss of preferred domain orientation during sequentially increasing field amplitudes, is notably low in these materials, showing that the initial domain alignment is strongly stabilized. Overall, the in situ measurements reveal that domain wall motion significantly impacts the structure and properties of BNT-45PT and reinforces the importance of understanding domain wall motion contributions to the physical properties of ferroelectrics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRSDate not supplied

Aeroelastic Analysis of Highly Flexible Wings with Linearized Frequency-Domain Aerodynamics

Flutter analysis of configurations with geometric structural nonlinearities typically is done with time-domain analysis. The results from this process are computationally expensive and can yield cumbersome results that may be difficult to manage/interpret. Compared to time-domain methods, frequency-domain flutter analysis can provide additional insight into the characteristics of a flutter stability problem. By linearizing the aeroelastic problem about the nonlinear equilibrium state, this work applies frequency-domain aeroelastic analysis to the Pazy wing, the subject of the Large Deformation Working Group in the Aeroelastic Prediction Workshop. Generalized aerodynamic forces (GAFs) are computed with both a doublet-lattice method and a computational fluid dynamics solver at a range of reduced frequencies as well as a range of dynamic pressures to account for the dependence of the mode shapes on the nonlinear equilibrium state. These GAFs are used in a p-k flutter solver, which is modified to handle the dependence of the stiffness matrix and GAFs on the dynamic pressure.

Bret K Stanford↗
DOE OSTI2017

C-terminal tail of NADPH oxidase organizer 1 (Noxo1) mediates interaction with NADPH oxidase activator (Noxa1) in the NOX1 complex

NOX1 (NADPH oxidase) similar to phagocyte NADPH oxidase, is expressed mainly in the colon epithelium and it is responsible for host defense against microbial infections by generating ROS (reactive oxygen species). NOX1 is activated by two regulatory cytosolic proteins that form a hetero-dimer, Noxo1 (NOX organizer 1) and Noxa1 (NOX activator 1). The interaction between Noxa1 and Noxo1 is critical for activating NOX1. However no structural studies for interaction between Noxa1 and Noxo1 has not been reported till date. Here, we studied the inter-molecular interaction between the SH3 domain of Noxa1 and Noxo1 using pull-down assay and NMR spectroscopy. {sup 15}N/{sup 13}C-labeled SH3 domain of Noxa1 has been purified for hetero-nuclear NMR experiments (HNCACB, CBCACONH, HNCA, HNCO, and HSQC). TALOS analysis using backbone assignment data of the Noxa1 SH3 domain showed that the structure primarily consists of β-sheets. Data from pull-down assay between the Noxo1 and Noxa1 showed that the SH3 domains (Noxa1) is responsible for interaction with Noxo1 C-terminal tail harboring proline rich region (PRR). The concentration-dependent titration of the Noxo1 C-terminal tail to Noxa1 shows that Noxo1 particularly in the RT loop: Q407*, H408, S409, A412*, G414*, E416, D417, L418, and F420; n-Src loop: C430, E431*, V432*, A435, W436, and L437; and terminal region: I447; F448*, F452* and V454 interact with Noxa1. Our results will provide a detailed understanding for interaction between Noxa1 and Noxo1 at the molecular level, providing insights into their cytoplasmic activity-mediated functioning as well as regulatory role of C-terminal tail of Noxo1 in the NOX1 complex. - Highlights: • C-terminal of Noxo1 harboring PRR motif is important for Noxa1 interaction. • Noxa1 SH3 binds C-terminal region of Noxo1with K{sub d} of 8.2 ± 1.41 μM. • Data from NMR experiments determined secondary structures of Noxa1 SH3. • Noxa1 interacts with PRR region of Noxo1, however, binding affinity is weaker than C-terminal tail of Noxo1. • Our results provide insights into regulatory role of C-terminal tail of Noxo1 in the NOX1 complex.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Genetic encoding of 3–nitro–tyrosine reveals the impacts of 14–3–3 nitration on client binding and dephosphorylation

14–3–3 proteins are central hub regulators of hundreds of phosphorylated “client” proteins. They are subject to over 60 post–translational modifications (PTMs), yet little is known how these PTMs alter 14–3–3 function and its ability to regulate downstream signaling pathways. An often neglected, but well–documented 14–3–3 PTM found under physiological and immune–stimulatory conditions is the conversion of tyrosine to 3–nitro–tyrosine at several Tyr sites, two of which are located at sites considered important for 14–3–3 function: Y130 (β–isoform numbering) is located in the primary phospho–client peptide–binding groove, while Y213 is found on a secondary binding site that engages with clients for full 14–3–3/client complex formation and client regulation. By genetically encoding 3–nitro–tyrosine, we sought to understand if nitration at Y130 and Y213 effectively modulated 14–3–3 structure, function, and client complexation. The 1.5 Å resolution crystal structure of 14–3–3 nitrated at Y130 showed the nitro group altered the conformation of key residues in the primary binding site, while functional studies confirmed client proteins failed to bind this variant of 14–3–3. But, in contrast to other client–binding deficient variants, it did not localize to the nucleus. Further, the 1.9 Å resolution structure of 14–3–3 nitrated at Y213 revealed unusual flexibility of its C–terminal α–helix resulting in domain swapping, suggesting additional structural plasticity though its relevance is not clear as this nitrated form retained its ability to bind clients. Collectively, our data suggest that nitration of 14–3–3 will alter downstream signaling systems, and if uncontrolled could result in global dysregulation of the 14–3–3 interactome.

14-3-3↗
DOE OSTI2019

Fluoroalkyl-functional imidazoles and imidazolium–based ionic liquids prepared via thiol-ene/yne click chemistry

A fluorinated thiol was systematically investigated against a diverse set of –ene- and –yne-bearing imidazole and imidazolium substrates in the pursuit of new cation-fluorinated, omniphobic (hydrophobic and oleophobic) ionic liquids for aerospace applications. Compounds were prepared using UV-initiated click chemistry at quantitative conversion and purified with relative ease. Seven ionic liquids were synthesized and have isolated yields ranging from 74% to >99%. Five of the new cation-fluorinated ionic liquids are hydrophobic and two are liquids at room temperature. In addition to hydrophobicity, the seven ionic liquids’ solubilities were qualitatively examined across a wide spectrum of conventional organic solvents. Of note, the majority of the prepared ionic liquids are insoluble in water and hexanes yet soluble in methanol, acetone, acetonitrile, and dichloromethane. In addition to intriguing solubility properties, the ionic liquids in this study have high densities without the incorporation of heavy atoms, ranging from 1.596 to 1.924 g cm –3 . The fluorinated salts also show good short-term thermal stability in air, with decomposition temperatures ranging from 215 °C to 320 °C. Other relevant characterization methods include spectroscopy, thermal analysis, and physical property measurements where appropriate. The X-ray crystal structure of a divalent, cation-fluorinated ionic liquid from this study was also obtained and shows unique fluorous domains in the extended structure, providing valuable insight into the materials’ physical properties. Furthermore, this work highlights a family of compounds moving towards omniphobic ionic liquids yielding potential possibilities for future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1992

Structure of a human monoclonal antibody Fab fragment against gp41 of human immunodeficiency virus type

The three-dimensional structure of a human monoclonal antibody (Fab), which binds specifically to a major epitope of the transmembrane protein gp41 of the human immunodeficiency virus type 1, has been determined by crystallographic methods to a resolution of 2.7 A. It has been previously determined that this antibody recognizes the epitope SGKLICTTAVPWNAS, belongs to the subclass IgG1 (kappa), and exhibits antibody-dependent cellular cytotoxicity. The quaternary structure of the Fab is in an extended conformation with an elbow bend angle between the constant and variable domains of 175 degrees. Structurally, four of the hypervariable loops can be classified according to previously recognized canonical structures. The third hypervariable loops of the heavy (H3) and light chain (L3) are structurally distinct. Hypervariable loop H3, residues 102H-109H, is unusually extended from the surface. The complementarity-determining region forms a hydrophobic binding pocket that is created primarily from hypervariable loops L3, H3, and H2.

He, X. M.↗
NASA NTRS1992

Structure of a human monoclonal antibody Fab fragment against gp41 of human immunodeficiency virus type 1

The three-dimensional structure of a human monoclonal antibody (Fab), which binds specifically to a major epitope of the transmembrane protein gp41 of the human immunodeficiency virus type 1, has been determined by crystallographic methods to a resolution of 2.7 A. It has been previously determined that this antibody recognizes the epitope SGKLICTTAVPWNAS, belongs to the subclass IgG1 (kappa), and exhibits antibody-dependent cellular cytotoxicity. The quaternary structure of the Fab is in an extended conformation with an elbow bend angle between the constant and variable domains of 175 deg. Structurally, four of the hypervariable loops can be classified according to previously recognized canonical structures. The third hypervariable loops of the heavy (H3) and light chain (L3) are structurally distinct. Hypervariable loop H3, residues 102H-109H, is unusually extended from the surface. The complementarity-determining region forms a hydrophobic binding pocket that is created primarily from hypervariable loops L3, H3, and H2.

He, Xiao M.↗
DOE OSTI2015

Ordered domain lateral location, symmetry, and thermal stability in Ge:Si islands

Compositional atomic ordering is a crucial issue in the epitaxial growth of nanoparticles and thin films. Here, we report on a method based on x-ray diffuse scattering close to basis forbidden Bragg reflections to infer the lateral location, the symmetry, and the thermal stability of ordered domains in GeSi dome-shaped islands on Si(001) after growth and during annealing. We observe that atomic ordering does not disappear after annealing, demonstrating that it is a resilient metastable phenomenon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

A General Sparse Tensor Framework for Electronic Structure Theory

Linear-scaling algorithms must be developed in order to extend the domain of applicability of electronic structure theory to molecules of any desired size. But, the increasing complexity of modern linear-scaling methods makes code development and maintenance a significant challenge. A major contributor to this difficulty is the lack of robust software abstractions for handling block-sparse tensor operations. We therefore report the development of a highly efficient symbolic block-sparse tensor library in order to provide access to high-level software constructs to treat such problems. Our implementation supports arbitrary multi-dimensional sparsity in all input and output tensors. We then avoid cumbersome machine-generated code by implementing all functionality as a high-level symbolic C++ language library and demonstrate that our implementation attains very high performance for linear-scaling sparse tensor contractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Morphological Simulation of Phase Separation Coupled Oscillation Shear and Varying Temperature Fields

This paper explores the effect of the shear frequency and Prandtl number (Pr) on the procedure and pattern formation of phase separation in symmetric and asymmetric systems. For the symmetric system, the periodic shear significantly prolongs the spinodal decomposition stage and enlarges the separated domain in domain growth stage. By adjusting the Pr and shear frequency, the number and orientation of separated steady layer structures can be controlled during domain stretch stage. The numerical results indicate that the increase in Pr and decrease in the shear frequency can significantly increase in the layer number of the lamellar structure, which relates to the decrease in domain size. Furthermore, the lamellar orientation parallel to the shear direction is altered into that perpendicular to the shear direction by further increasing the shear frequency, and also similar results for larger systems. For asymmetric system, the quantitative analysis shows that the decrease in the shear frequency enlarges the size of separated minority phases. These numerical results provide guidance for setting the optimum condition for the phase separation under periodic shear and slow cooling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Microstructure and property tailoring of castable nanostructured alloys through thermomechanical treatments

Three types of microstructures, i.e., tempered-martensite (TM), ferrite (F), and dual-phase (TM + F), were developed in a castable nanostructured alloy that favors a high density of nanoprecipitates compared with the precipitates in current reduced-activation ferritic-martensitic steels. The effect of the distinct microstructures on tensile properties, Charpy impact toughness, and thermal helium desorption behavior was investigated with the full TM structure as a reference. The results indicated that the F domain in the TM + F structure governed the strength and slightly impaired the impact toughness. The full F structure exhibited the highest strength without compromising ductility, but it noticeably diminished impact toughness. All microstructures had a dominant helium desorption peak at ~1070 °C. The higher density of nanoprecipitates and complex boundaries and dislocations in the TM + F structure enhanced the secondary helium desorption peak and extended the shoulder peak, in contrast to the full TM structure with an enlarged desorption peak associated with the ferrite-to-austenite transformation at ~810–850 °C and the full F structure with a dominant desorption peak related to bubble migration at ~1070 °C. These results suggest that components fabricated from functionally graded microstructures could be engineered to exploit the advantages of different microstructures for demanding application requirements.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Functional plasticity of antibacterial EndoU toxins

Bacteria use several different secretion systems to deliver toxic EndoU ribonucleases into neighboring cells. Here, we present the first structure of a prokaryotic EndoU toxin in complex with its cognate immunity protein. The contact-dependent growth inhibition toxin CdiA-CT STECO31 from Escherichia coli STEC_O31 adopts the eukaryotic EndoU fold and shares greatest structural homology with the nuclease domain of coronavirus Nsp15. The toxin contains a canonical His-His-Lys catalytic triad in the same arrangement as eukaryotic EndoU domains, but lacks the uridylate-specific ribonuclease activity that characterizes the superfamily. Comparative sequence analysis indicates that bacterial EndoU domains segregate into at least three major clades based on structural variations in the N-terminal subdomain. Representative EndoU nucleases from clades I and II degrade tRNA molecules with little specificity. In contrast, CdiA-CT STECO31 and other clade III toxins are specific anticodon nucleases that cleave tRNA Glu between nucleotides C37 and m 2 A38. In conclusion, these findings suggest that the EndoU fold is a versatile scaffold for the evolution of novel substrate specificities. Such functional plasticity may account for the widespread use of EndoU effectors by diverse inter-bacterial toxin delivery systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Differential CLE peptide perception by plant receptors implicated from structural and functional analyses of TDIF-TDR interactions

Tracheary Element Differentiation Inhibitory Factor (TDIF) belongs to the family of post-translationally modified CLE (CLAVATA3/embryo surrounding region (ESR)-related) peptide hormones that control root growth and define the delicate balance between stem cell proliferation and differentiation in SAM (shoot apical meristem) or RAM (root apical meristem). In Arabidopsis, Tracheary Element Differentiation Inhibitory Factor Receptor (TDR) and its ligand TDIF signaling pathway is involved in the regulation of procambial cell proliferation and inhibiting its differentiation into xylem cells. Here we present the crystal structures of the extracellular domains (ECD) of TDR alone and in complex with its ligand TDIF resolved at 2.65 Åand 2.75 Å respectively. These structures provide insights about the ligand perception and specific interactions between the CLE peptides and their cognate receptors. Our in vitro biochemical studies indicate that the interactions between the ligands and the receptors at the C-terminal anchoring site provide conserved binding. While the binding interactions occurring at the N-terminal anchoring site dictate differential binding specificities between different ligands and receptors. Our studies will open different unknown avenues of TDR-TDIF signaling pathways that will enhance our knowledge in this field highlighting the receptor ligand interaction, receptor activation, signaling network, modes of action and will serve as a structure function relationship model between the ligand and the receptor for various similar leucine-rich repeat receptor-like kinases (LRR-RLKs).

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1994

Diagenetic Microcrystalline Opal Varieties from the Monterey Formation, CA: HRTEM Study of Structures and Phase Transformation Mechanisms

Microcrystalline opal varieties form as intermediary precipitates during the diagenetic transformation of biogenically precipitated non-crystalline opal (opal-A) to microquartz. With regard to the Monterey Formation of California, X-ray powder diffraction studies have shown that a decrease in the primary d-spacing of opal-CT toward that of cristobalite occurs with increasing diagenesis. The initial timing of opal-CT/quartz formation and the value of the primary opal-CT d-spacing, are influenced by the sediment. lithology. Transmission electron microscopy methods (CTEM/HRTEM) were used to investigate the structure of the diagenetic phases and establish transformation mechanisms between the varieties of microcrystalline opals in charts and porcelanites from the Monterey Formation. HRTEM images revealed that the most common fibrous varieties of microcrystalline opals contain varying amounts of structural disorder. Finite lamellar units of cristobalite-and tridymite-type. layer sequences were found to be randomly stacked in a direction perpendicular to the fiber axis. Disordered and ordered fibers were found to have coprecipitated within the same radial fiber bundles that formed within the matrix of the Most siliceous samples. HRTEM images, which reveal that the fibers within radial and lepispheric fiber bundles branch non-crystallographically, support an earlier proposal that microspheres in chert grow via a spherulitic growth mechanism. A less common variety of opal-CT was found to be characterized by non-parallel (low-angle) stacking sequences that often contain twinned lamellae. Tabular-shaped crystals of orthorhombic tridymite (PO-2) were also identified in the porcelanite samples. A shift in the primary d-spacing of opal-CT has been interpreted as an indication of solid-state ordering g toward a predominantly cristobalite structure, (opal-C). Domains of opal-C were identified as topotactically-oriented overgrowths on discrete Sections of opal-CT fibers and as lamellar domains within relict opal-CT fibers. These findings indicate that the type of transformation mechanism depends upon the primary structural characteristics of the authigenic opaline. varieties that are in turn influenced by the sediment lithology.

Cady, Sherry L.↗
NASA NTRS2004

Structural Basis for the Catalytic Activity of Human Serine/Threonine Protein Phosphatase-5

Serinehhreonine protein phosphatase-5 (PP5) affects many signaling networks that regulate cell growth and cellular responses to stress. Here we report the crystal structure of the PP5 catalytic domain (PP5c) at a resolution of 1.6 A. From this structure we resolved the mechanism for PP5-mediated hydrolysis of phosphoprotein substrates, which requires the precise positioning of two metal ions within a con served Aspn-271-M(sub 1):M(sub 2)-W(sup 1)-His-427-His-304-Asp-274 catalytic motif. The structure of PPSc provides a structural basis for explaining the exceptional catalytic proficiency of protein phosphatases, which are among the most powerful known catalysts. Resolution of the entire C-terminus revealed a novel subdomain, and the structure of the PP5c should also aid development of type-specific inhibitors.

Swingle, M. R.↗
NASA NTRS1991

Design optimization of space structures

The topology-shape-size optimization of space structures is investigated through Kikuchi's homogenization method. The method starts from a 'design domain block,' which is a region of space into which the structure is to materialize. This domain is initially filled with a finite element mesh, typically regular. Force and displacement boundary conditions corresponding to applied loads and supports are applied at specific points in the domain. An optimal structure is to be 'carved out' of the design under two conditions: (1) a cost function is to be minimized, and (2) equality or inequality constraints are to be satisfied. The 'carving' process is accomplished by letting microstructure holes develop and grow in elements during the optimization process. These holes have a rectangular shape in two dimensions and a cubical shape in three dimensions, and may also rotate with respect to the reference axes. The properties of the perforated element are obtained through an homogenization procedure. Once a hole reaches the volume of the element, that element effectively disappears. The project has two phases. In the first phase the method was implemented as the combination of two computer programs: a finite element module, and an optimization driver. In the second part, focus is on the application of this technique to planetary structures. The finite element part of the method was programmed for the two-dimensional case using four-node quadrilateral elements to cover the design domain. An element homogenization technique different from that of Kikuchi and coworkers was implemented. The optimization driver is based on an augmented Lagrangian optimizer, with the volume constraint treated as a Courant penalty function. The optimizer has to be especially tuned to this type of optimization because the number of design variables can reach into the thousands. The driver is presently under development.

Felippa, Carlos↗
DOE OSTI2014

Structural and functional analysis of the human spliceosomal DEAD-box helicase Prp28

The crystal structure of the helicase domain of the human spliceosomal DEAD-box protein Prp28 was solved by SAD. The binding of ADP and ATP by Prp28 was studied biochemically and analysed with regard to the crystal structure. The DEAD-box protein Prp28 is essential for pre-mRNA splicing as it plays a key role in the formation of an active spliceosome. Prp28 participates in the release of the U1 snRNP from the 5′-splice site during association of the U5·U4/U6 tri-snRNP, which is a crucial step in the transition from a pre-catalytic spliceosome to an activated spliceosome. Here, it is demonstrated that the purified helicase domain of human Prp28 (hPrp28ΔN) binds ADP, whereas binding of ATP and ATPase activity could not be detected. ATP binding could not be observed for purified full-length hPrp28 either, but within an assembled spliceosomal complex hPrp28 gains ATP-binding activity. In order to understand the structural basis for the ATP-binding deficiency of isolated hPrp28, the crystal structure of hPrp28ΔN was determined at 2.0 Å resolution. In the crystal the helicase domain adopts a wide-open conformation, as the two RecA-like domains are extraordinarily displaced from the productive ATPase conformation. Binding of ATP is hindered by a closed conformation of the P-loop, which occupies the space required for the γ-phosphate of ATP.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Viral Nuclease Inhibitors: Small molecule disruptors of the UL12 alkaline nuclease display broad anti-herpes virus activity

Herpes simplex virus 1 (HSV-1) UL12 encodes a highly conserved 5′ → 3′ alkaline exonuclease that is essential for the production of infectious virus. Together with the viral single-stranded DNA-binding/annealing protein ICP8, UL12 functions as a two-component recombinase that mediates recombination-dependent viral DNA replication. Here, we present the crystal structure of the catalytic domain of the HSV alkaline nuclease (UL12), which provides the first view of an α-herpesvirus alkaline nuclease. Using this structure, we optimized a series of small-molecule viral nuclease inhibitors (VNIs) that target the UL12 active site and potently inhibit UL12 exonuclease activity in vitro. We have thus established a robust platform for structure-based docking, SAR analysis and rational inhibitor design. Because UL12 orthologs are conserved across all human herpesviruses, we examined the activity of these compounds against the β- and γ-herpesvirus alkaline nucleases UL98 and SOX and found that they inhibit all three enzymes. The VNIs also exhibit antiviral activity against HSV-1 and HCMV in cell culture. EC 50 and IC 50 values were in the nanomolar to low micromolar range. Together, these findings establish herpesvirus alkaline nucleases as conserved, druggable antiviral targets and provide a foundation for the development of broad-spectrum anti-herpesvirus therapeutics, either as standalone agents or in combination with existing nucleoside analogs.

Sharma, Nidhi↗