Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Curve fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

A Likely Detection of a Two-planet System in a Low-magnification Microlensing Event

We report on the analysis of a microlensing event, OGLE-2014-BLG-1722, that showed two distinct short-term anomalies. The best-fit model to the observed light curves shows that the two anomalies are explained with two planetary mass ratio companions to the primary lens. Although a binary-source model is also able to explain the second anomaly, it is marginally ruled out by 3.1σ. The two-planet model indicates that the first anomaly was caused by planet “b” with a mass ratio of q=(4.5{sub −0.6}{sup +0.7})×10{sup −4} and projected separation in units of the Einstein radius, s = 0.753 ± 0.004. The second anomaly reveals planet “c” with a mass ratio of q{sub 2}=(7.0{sub −1.7}{sup +2.3})×10{sup −4} with Δχ {sup 2} ∼ 170 compared to the single-planet model. Its separation has two degenerated solutions: the separation of planet c is s {sub 2} = 0.84 ± 0.03 and 1.37 ± 0.04 for the close and wide models, respectively. Unfortunately, this event does not show clear finite-source and microlensing parallax effects; thus, we estimated the physical parameters of the lens system from Bayesian analysis. This gives the masses of planets b and c as m{sub b}=56{sub −33}{sup +51} and m{sub c}=85{sub −51}{sup +86} M{sub ⊕}, respectively, and they orbit a late-type star with a mass of M{sub host} =0.40{sub −0.24}{sup +0.36} M{sub ⊙} located at D{sub L}=6.4{sub −1.8}{sup +1.3} kpc from us. The projected distances between the host and planets are r{sub ⊥,b}=1.5±0.6 au for planet b and r{sub ⊥,c}=1.7{sub −0.6}{sup +0.7} au and r{sub ⊥,c}=2.7{sub −1.0}{sup +1.1} au for the close and wide models of planet c. If the two-planet model is true, then this is the third multiple-planet system detected using the microlensing method and the first multiple-planet system detected in low-magnification events, which are dominant in the microlensing survey data. The occurrence rate of multiple cold gas giant systems is estimated using the two such detections and a simple extrapolation of the survey sensitivity of the 6 yr MOA microlensing survey combined with the 4 yr μFUN detection efficiency. It is estimated that 6% ± 2% of stars host two cold giant planets.

79 ASTRONOMY AND ASTROPHYSICS↗

Comprehensive solar cell modeling and correlation studies

Modeling and correlation studies of solar cells was discussed. Recursive relationships were used to generate solutions at a number of mesh points within the emitter region. Photoexcited hole concentration and built-in electric field were calculated as a function of position. Simulated and experimentally determined I-V curves were shown to have good fit.

Lamorte, M. L.↗

Scattering from mirrors contaminated by particulates - A model

A model has been used to fit the bidirectional reflectance distribution function for a variety of samples with different angles of incidence and degrees of contamination and roughness by the proper adjustment of six parameters. Exponential and Gaussian composite surface height autocorrelation functions are used to simulate the data at the small and medium angles, and a perturbation of these functions with two additional parameters allows the fit of the upward and downward curve portions of the data at the large angles. Good agreement is found with previous results. The present approach is the same as the classical dispersion equation in treating the index of refraction of optical materials.

Wang, Yaujen↗

Infrared observations of eclipses of Io, its thermophysical parameters, and the thermal radiation of the Loki volcano and environs

Observations of Io during eclipses by Jupiter in 1981-1984 are reported. Data obtained at 3.45-30 microns using bolometer system No. 1 on the 3-m IRTF telescope at Mauna Kea are presented in extensive tables and graphs and analyzed by means of least-squares fitting of thermophysical models to the eclipse cooling and heating curves, thermal-radiation calculations for the Io volcanoes, and comparison with Voyager data. Best fits are obtained for a model comprising (1) a bright region with a vertically inhomogeneous surface and (2) a dark vertically homogeneous region with thermal inertia only about 0.1 times that of (1). Little evidence of volcanic-flux variability during the period is found, and the majority (but not all) of the excess thermal IR radiation in the sub-Jovian hemisphere is attributed to the Loki volcano and its lava lake.

Sinton, William M.↗

A spectroscopic and photometric study of 12 BM Camelopardalis

Radial velocities from 1916.95 to 1991.95 and photometry from l979.25, both published and new in this paper, are presented and analyzed. A new solution of the radial velocity curve reveals a new period of 80.90 days and an eccentricity of e = 0.05 +/- 0.02, both very different from the 80.17 days and 0.35 found by Abt et al. (1969). An alternative solution with e = 0 is given because we cannot decide firmly whether or not the small eccentricity is real. We find V sin i = 11.3 +/- 0.3 km/s from Maidanak and 10 unequal depth. 0.048 mins and 0.026 mins. The orbital ephemeris for conjunction (K gisnt behind) is JD(hel.) 2,448,111.1 (+/- 0.4 days ) + 80.898 days (+/- 0.004 days ) E, consistent with both the radial velocities and the photometry. With the ellipticity effect removed, the light curve shows residual variability which we fit with a two-spot model. During the 13 years covered by photometry there were nine different starspots, the largest one producing a light loss of 0.19 mins. Rotation periods for the nine spots ranged from 78.6 +/- 0.5 days to 83.7 +/- 0.4 days from which we concluded that the K giant does rotate synchronously but with a differential rotation coefficient of k = 0.06 +/- 0.01. Lifetimes for the nine spots ranged from 1.1 to greater than 4.2 yr and were consistent with the empirical spot lifetime laws of Hall & Henry (1994). Use of the mass function, the orbital period, the V sin i, the two different ellipticity effect amplitudes, and various logical constraints led to ranges of possible masses, radii and inclinations. The most believable solution was around i = 90 deg, R(sub 1) = 24 solar radii, M(sub 1) = 1.1 solar mass, and M(sub 2) = 0.6 solar mass. THe Rossby number for the K giant is 0.48, small enough compared to the critical value of 0.65 to explain why, though rotating 'slowly', it does have large spots.

Hall, Douglas S.↗

Energy Calibration of the Scintillating Optical Fiber Calorimeter Chamber (SOFCAL)

The Scintillating Optical Fiber Calorimeter (SOFCAL) detector is designed to make direct measures of the primary cosmic ray spectrum from -200 GeV/amu - 20 TeV/amu. The primary particles are resolved into groups according to their charge (p, He, CNO, Medium Z, Heavy Z) using both active and passive components integrated into the detector. The principal part of SOFCAL is a thin ionization calorimeter that measures the electromagnetic cascades that result from these energetic particles interacting in the detector. The calorimeter is divided into two sections: a thin passive emulsion/x-ray film calorimeter, and a fiber calorimeter that uses crossing layers of small scintillating optical fibers to sample the energy deposition of the cascades. The energy determination is made by fitting the fiber data to transition curves generated by Monte Carlo simulations. The fiber data must first be calibrated using the electron counts from the emulsion plates in the calorimeter for a small number of events. The technique and results of this calibration will be presented together with samples of the data from a balloon flight.

Christl, M. C.↗

UV Chromospheric Activity in Cool, Short-Period Contact Binaries

We have completed our analysis of the IUE spectra of the short-period contact binary OO Aql. OO Aql is a rare W UMa-type eclipsing binary in which the two solar-type stars may have only recently evolved into contact. The binary has an unusually high mass ratio (0.84), and a relatively long orbital period (0.506 d) for its spectral type (mid-G). Twelve ultraviolet spectra of OO Aql were obtained in 1988 with the IUE satellite, including a series of consecutive observations that cover nearly a complete orbital cycle. Chromospheric activity is studied by means of the Mg II h+k emission at 2800 A. The Mg II emission is found to vary, even when the emission is normalized to the adjacent continuum flux. This variation may be correlated with orbital phase in the 1988 observations. It also appears that the normalized Mg H emission varies with time, as seen in spectra obtained at two different epochs in 1988 and when compared with two spectra obtained several years earlier. The level of chromospheric activity in OO Aql is less than that of other W UMa-type binaries of similar colors, but this is attributed to its early stage of contact binary evolution. Ultraviolet light curves were composed from measurements of the ultraviolet continuum in the spectra. These were analyzed along with visible light curves of OO Aql to determine the system parameters. The large wavelength range in the light curves enabled a well-constrained fit to a cool spot in the system. A paper on these results is scheduled for publication in the February 2001 issue of the Astronomical Journal.

Hrivnak, Bruce J.↗

Studies of the Ability to Hold the Eye in Eccentric Gaze: Measurements in Normal Subjects with the Head Erect

We studied the ability to hold the eyes in eccentric horizontal or vertical gaze angles in 68 normal humans, age range 19-56. Subjects attempted to sustain visual fixation of a briefly flashed target located 30 in the horizontal plane and 15 in the vertical plane in a dark environment. Conventionally, the ability to hold eccentric gaze is estimated by fitting centripetal eye drifts by exponential curves and calculating the time constant (t(sub c)) of these slow phases of gazeevoked nystagmus. Although the distribution of time-constant measurements (t(sub c)) in our normal subjects was extremely skewed due to occasional test runs that exhibited near-perfect stability (large t(sub c) values), we found that log10(tc) was approximately normally distributed within classes of target direction. Therefore, statistical estimation and inference on the effect of target direction was performed on values of z identical with log10t(sub c). Subjects showed considerable variation in their eyedrift performance over repeated trials; nonetheless, statistically significant differences emerged: values of tc were significantly higher for gaze elicited to targets in the horizontal plane than for the vertical plane (P less than 10(exp -5), suggesting eccentric gazeholding is more stable in the horizontal than in the vertical plane. Furthermore, centrifugal eye drifts were observed in 13.3, 16.0 and 55.6% of cases for horizontal, upgaze and downgaze tests, respectively. Fifth percentile values of the time constant were estimated to be 10.2 sec, 3.3 sec and 3.8 sec for horizontal, upward and downward gaze, respectively. The difference between horizontal and vertical gazeholding may be ascribed to separate components of the velocity position neural integrator for eye movements, and to differences in orbital mechanics. Our statistical method for representing the range of normal eccentric gaze stability can be readily applied in a clinical setting to patients who were exposed to environments that may have modified their central integrators and thus require monitoring. Patients with gaze-evoked nystagmus can be flagged by comparing to the above established normative criteria.

Reschke, Millard F.↗

GASPS Photometry of the Tucana-Horologium Association

The GASPS Open Time Key Programme on Herschel represents a new opportunity to sensitively probe protoplanetary and debris disks at far-IR wavelengths. We present preliminary PACS 70 and 160 micron photometry of eighteen stars in the 30 Myr-old Tucana-Horologium association. Of these eighteen, eight were detected in the 70 micron band. Four of these eight were also detected in the 160 micron band. We constructed SEDs for these systems using optical data from Hipparcos (B and V), near-IR data from 2MASS (J, H, and K), mid-IR data from IRAS and Spitzer MIPS (12 and 24 microns, respectively), and the new far-IR data from PACS. For the stars showing IR excess emission, we fit simple single-temperature blackbody curves to the IR excess in order to determine the rough dust abundances and temperatures. Dust observations at these wavelengths will also be important for comparison with upcoming Herschel PACS spectra that will search for gas in the disks. Our goal is to determine or limit the ever-allusive gas-to-dust ratio for these disk systems.

Roberge, Donaldson J.↗

The Geometry and Optics of Synchrotron Radiation

The geometrical-optical properties of synchrotron radiation coming from a curving, relativistic electron beam do not fit into any usual category of light or radiation source, The center of the apparent source of radiation depends on the position of the observer with respect to the orbit, and the source has an axial extent which is a function of the sizes of the beam and the observation aperture. The beam image formed by focusing the synchrotron light is subject to distortions and depth of field errors. These errors are calculated, and, in some cases, methods of correction are given. The limits put on resolution by geometrical effects are given. Beam orbit changes cause errors in the angular acceptance of observation systems: these effects can also be corrected. Furthermore the dimensions of the diffuse shadows cast by rays from the finite-sized source impinging on edges are calculated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Finite Element Simulation of Mixed-Mode PV Encapsulant Delamination Based on Cohesive Zone Model: Preprint

A finite element model (FEM) was developed to simulate the mixed-mode delamination failure at the encapsulant interface within PV modules under mixed-mode loading condi- tions. Parameters to characterize the bilinear traction-separation constitutive behavior of cohesive elements were determined by testing the pure mode I critical fracture energy of the photovotaic(PV) cell interface using the width-tapered beam and fitting the simulated load-displacement curve with the tested curve. This developed FEM can be used to predict the critical temperature changes, at which delamination would initiate, of PV modules with different sizes and provide guidance for the design of PV module with better reliability.

97 MATHEMATICS AND COMPUTING↗

Synthesis of uniform CdS nanowires in high yield and its single nanowire electrical property

Large-scale high quality CdS nanowires with uniform diameter were synthesized by using a rapid and simple solvothermal route. Field emission scan electron microscopy (FESEM) and transmission electron microscopy (TEM) images show that the CdS nanowires have diameter of about 26 nm and length up to several micrometres. High resolution TEM (HRTEM) study indicates the single-crystalline nature of CdS nanowires with an oriented growth along the c-axis direction. The optical properties of the products were characterized by UV-vis absorption spectra, photoluminescence spectra and Raman spectra. The resistivity, electron concentration and electron mobility of single NW are calculated by fitting the symmetric I-V curves measured on single NW by the metal-semiconductor-metal model based on thermionic field emission theory. - Graphical abstract: Large-scale high quality CdS nanowires (NWs) with uniform diameter were synthesized by using a rapid and simple solvothermal route. The reaction time is reduced to 2 h, comparing to other synthesis which needed long reaction time up to 12 h. In addition, the as-prepared CdS nanowires have more uniform diameter and high yield. More importantly, the I-V curve of present single CdS nanowire has a good symmetric characteristic as expected by the theory.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Using the Diffusion Equation to Predict CST Resin Breakthroughs - 19051

The crystalline silicotitanate, CST, resin manufactured by UOP Honeywell is well-suited for single-use decontamination of caustic liquid wastes at Hanford and Savannah River Sites. There are many measurements of column loading and breakthrough for CST resin decontamination of Cs-137 in various Hanford and SRS waste simulants. Such measurements provide a very good basis for estimating CST resin demand and these more refined predictions make the CST column loading as efficient as possible given the very expensive CST resin. Although there are a variety of tools for predicting chromatographic resin column performance, [1-4], there is a particularly useful method that is suitable as a simple spreadsheet model [4]. This spreadsheet model is an analytical error function for the mass transfer zone (mtz) diffusion width in resin columns and is well-suited for resin breakthrough and column loading. This paper describes just such an error function spreadsheet model and how well the error function agrees with more traditional models and fits the observed small scale breakthrough curves for CST that can then better predict large scale column loading efficiency. The very high sorption of Cs onto CST tends to be slower than that of other lower sorption resins and as a result of the slow CST kinetics, there is also a marked asymmetry in many CST breakthrough curves. The CST breakthrough asymmetry is largely due to the distribution of CST particle sizes because smaller particles sorb much faster than larger particles. It is then the smaller particles that determine the leading mtz at a decontamination factor of 1,000 breakthrough and therefore the decontamination efficiency for a given loading. The larger CST particles correspondingly determine the tailing mtz width and therefore the overall loading efficiency and it is important to model both leading and tailing mtz widths to best optimize CST for a particular Cs-137 decontamination application. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Simple inhomogeneous cosmological (toy) models

Based on the Lemaître-Tolman-Bondi (LTB) metric we consider two flat inhomogeneous big-bang models. We aim at clarifying, as far as possible analytically, basic features of the dynamics of the simplest inhomogeneous models and to point out the potential usefulness of exact inhomogeneous solutions as generalizations of the homogeneous configurations of the cosmological standard model. We discuss explicitly partial successes but also potential pitfalls of these simplest models. Although primarily seen as toy models, the relevant free parameters are fixed by best-fit values using the Joint Light-curve Analysis (JLA)-sample data. On the basis of a likelihood analysis we find that a local hump with an extension of almost 2 Gpc provides a better description of the observations than a local void for which we obtain a best-fit scale of about 30 Mpc. Future redshift-drift measurements are discussed as a promising tool to discriminate between inhomogeneous configurations and the ΛCDM model.

79 ASTRONOMY AND ASTROPHYSICS↗

Measuring stellar populations, dust attenuation and ionized gas at kpc scales in 10010 nearby galaxies using the integral field spectroscopy from MaNGA

As one of the three major experiments of the fourth-generation Sloan Digital Sky Survey (SDSS-IV), the Mapping Nearby Galaxies at Apatch Point Observatory (MaNGA) survey has obtained high-quality integral field spectroscopy (IFS) with a resolution of 1–2 kpc for ∼ 10 4 galaxies in the local universe during its six-year operation from July 2014 through August 2020. It is crucial to reliably measure the physical properties of the different components in each spectrum before one can use the data for any scientific study. In the past years we have made lots of efforts to develop a novel technique of full spectral fitting, which estimates a model-independent dust attenuation curve from each spectrum, thus allowing us to break the degeneracy between dust attenuation and stellar population properties when fitting the spectrum with stellar population synthesis models. We have applied our technique to the final data release of MaNGA, and obtained measurements of stellar population properties and emission line parameters, as well as the kinematics and dust attenuation of both stellar and ionized gas components. In this paper we describe our technique and the content and format of our data products. The whole dataset is publicly available in Science Data Bank with the link https://doi.org/10.57760/sciencedb.j00113.00088 .

Physics↗

The Early Light Curve of the Type Ia Supernova 2021hpr in NGC 3147: Progenitor Constraints with the Companion Interaction Model

The progenitor system of Type Ia supernovae (SNe Ia) is expected to be a close binary system consisting of a carbon/oxygen white dwarf (WD) and a nondegenerate star or another WD. Here, we present results from high-cadence monitoring observations of SN 2021hpr in a spiral galaxy, NGC 3147, and constraints on the progenitor system based on its early multicolor light-curve data. First, we classify SN 2021hpr as a normal SN Ia from its long-term photometric and spectroscopic data. More interestingly, we found a significant "early excess" in the light curve over a simple power-law ~t 2 evolution. The early light curve evolves from blue to red to blue during the first week. To explain this, we fitted the early part of the BVRI-band light curves with a two-component model consisting of ejecta–companion interaction and a simple power-law model. The early excess and its color can be explained by shock-cooling emission due to a companion star having a radius of 8.84 ± 0.58 R ⊙ . We also examined Hubble Space Telescope preexplosion images, finding no detection of a progenitor candidate, consistent with the above result. However, we could not detect signs of a significant amount of stripped mass from a nondegenerate companion star (≲0.003 M ⊙ for Hα emission). The early excess light in the multiband light curve supports a nondegenerate companion in the progenitor system of SN 2021hpr. At the same time, the nondetection of emission lines opens the door for other methods to explain this event.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of Cumulus Solar Irradiance Reflectance (CSIR) Events

Clouds are extremely important with regard to the transfer of solar radiation at the earth's surface. This study investigates Cumulus Solar Irradiance Reflection (CSIR) using ground-based pyranometers. CSIR events are short-term increases in solar radiation observed at the surface as a result of reflection off the sides of convective clouds. When sun-cloud observer geometry is favorable, these occurrences produce characteristic spikes in the pyranometer traces and solar irradiance values may exceed expected clear-sky values. Ultraviolet CSIR events were investigated during the summer of 1995 using Yankee Environmental Systems UVA-1 and UVB-1 pyranometers. Observed data were compared to clear-sky curves which were generated using a third degree polynomial best-fit line technique. Periods during which the observed data exceeded this clear-sky curve were identified as CSIR events. The magnitude of a CSIR event was determined by two different quantitative calculations. The MAC (magnitude above clear-sky) is an absolute measure of the difference between the observed and clear-sky irradiances. Maximum MAC values of 3.4 Wm(exp -2) and 0.069 Wm(exp -2) were observed at the UV-A and UV-B wavelengths, respectively. The second calculation determined the percentage above clear-sky (PAC) which indicated the relative magnitude of a CSIR event. Maximum UV-A and UV-B PAC magnitudes of 10.1% and 7.8%, respectively, were observed during the study. Also of interest was the duration of the CSIR events which is a function of sun-cloud-sensor geometry and the speed of cloud propagation over the measuring site. In both the UV-A and UV-B wavelengths, significant CSIR durations of up to 30 minutes were observed.

Laird, John L.↗

REFLECTED LIGHT CURVES, SPHERICAL AND BOND ALBEDOS OF JUPITER- AND SATURN-LIKE EXOPLANETS

Reflected light curves observed for exoplanets indicate that a few of them host bright clouds. We estimate how the light curve and total stellar heating of a planet depends on forward and backward scattering in the clouds based on Pioneer and Cassini spacecraft images of Jupiter and Saturn. We fit analytical functions to the local reflected brightnesses of Jupiter and Saturn depending on the planet’s phase. These observations cover broadbands at 0.59–0.72 and 0.39–0.5 μ m, and narrowbands at 0.938 (atmospheric window), 0.889 (CH4 absorption band), and 0.24–0.28 μ m. We simulate the images of the planets with a ray-tracing model, and disk-integrate them to produce the full-orbit light curves. For Jupiter, we also fit the modeled light curves to the observed full-disk brightness. We derive spherical albedos for Jupiter and Saturn, and for planets with Lambertian and Rayleigh-scattering atmospheres. Jupiter-like atmospheres can produce light curves that are a factor of two fainter at half-phase than the Lambertian planet, given the same geometric albedo at transit. The spherical albedo is typically lower than for a Lambertian planet by up to a factor of ∼1.5. The Lambertian assumption will underestimate the absorption of the stellar light and the equilibrium temperature of the planetary atmosphere. We also compare our light curves with the light curves of solid bodies: the moons Enceladus and Callisto. Their strong backscattering peak within a few degrees of opposition (secondary eclipse) can lead to an even stronger underestimate of the stellar heating.

79 ASTRONOMY AND ASTROPHYSICS↗