Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computer applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

An adaptive inverse kinematics algorithm for robot manipulators

An adaptive algorithm for solving the inverse kinematics problem for robot manipulators is presented. The algorithm is derived using model reference adaptive control (MRAC) theory and is computationally efficient for online applications. The scheme requires no a priori knowledge of the kinematics of the robot if Cartesian end-effector sensing is available, and it requires knowledge of only the forward kinematics if joint position sensing is used. Computer simulation results are given for the redundant seven-DOF robotics research arm, demonstrating that the proposed algorithm yields accurate joint angle trajectories for a given end-effector position/orientation trajectory.

Colbaugh, R.↗

Multidisciplinary Aerodynamic-Structural Shape Optimization Using Deformation (MASSOUD)

This paper presents a multidisciplinary shape parameterization approach. The approach consists of two basic concepts: (1) parameterizing the shape perturbations rather than the geometry itself and (2) performing the shape deformation by means of the soft object animation algorithms used in computer graphics. Because the formulation presented in this paper is independent of grid topology, we can treat computational fluid dynamics and finite element grids in a similar manner. The proposed approach is simple, compact, and efficient. Also, the analytical sensitivity derivatives are easily computed for use in a gradient-based optimization. This algorithm is suitable for low-fidelity (e.g., linear aerodynamics and equivalent laminated plate structures) and high-fidelity (e.g., nonlinear computational fluid dynamics and detailed finite element modeling analysis tools. This paper contains the implementation details of parameterizing for planform, twist, dihedral, thickness, camber, and free-form surface. Results are presented for a multidisciplinary design optimization application consisting of nonlinear computational fluid dynamics, detailed computational structural mechanics, and a simple performance module.

Samareh, Jamshid A.↗

Parallel Computational Fluid Dynamics: Current Status and Future Requirements

One or the key objectives of the Applied Research Branch in the Numerical Aerodynamic Simulation (NAS) Systems Division at NASA Allies Research Center is the accelerated introduction of highly parallel machines into a full operational environment. In this report we discuss the performance results obtained from the implementation of some computational fluid dynamics (CFD) applications on the Connection Machine CM-2 and the Intel iPSC/860. We summarize some of the experiences made so far with the parallel testbed machines at the NAS Applied Research Branch. Then we discuss the long term computational requirements for accomplishing some of the grand challenge problems in computational aerosciences. We argue that only massively parallel machines will be able to meet these grand challenge requirements, and we outline the computer science and algorithm research challenges ahead.

Simon, Horst D.↗

Assessment of analytic methods for the prediction of aerodynamic characteristics of arbitrary bodies at supersonic speeds

Trends toward the automation of the design process for airplanes and missiles accentuate the need for analytic techniques for the prediction of aerodynamic characteristics. A number of computer codes have been developed or are under development which show promise of significantly improving the estimation of aerodynamic characteristics for arbitrarily-shaped bodies at supersonic speeds. The programs considered range in complexity from a simple linearized solution employing slender body theory to an exact finite difference solution of the Euler equations. The results from five computer codes are compared with experimental data to determine the accuracy, range of applicability, ease of use, and computer time and cost of the programs. The results provide a useful guide for selecting the appropriate method for treating bodies at the various levels of an automated design process.

Landrum, E. J.↗

The implementation of the graphics of program EAGLE: A numerical grid generation code on NASA Langley SNS computer system

Program EAGLE (Eglin Arbitrary Geometry Implicit Euler) Numerical Grid Generation System is a composite (multi-block) algebraic or elliptic grid generation system designed to discretize the domain in and/or around any arbitrarily shaped three dimensional regions. This system combines a boundary conforming surface generation scheme and includes plotting routines designed to take full advantage of the DISSPLA Graphics Package (Version 9.0). Program EAGLE is written to compile and execute efficiently on any Cray machine with or without solid state disk (SSD) devices. Also, the code uses namelist inputs which are supported by all Cray machines using the FORTRAN compiler CFT77. The namelist inputs makes it easier for the user to understand the inputs and operation of Program EAGLE. EAGLE's numerical grid generator is constructed in the following form: main program, EGG (executive routine); subroutine SURFAC (surface generation routine); subroutine GRID (grid generation routine); and subroutine GRDPLOT (grid plotting routines). The EAGLE code was modified to use on the NASA-LaRC SNS computer (Cray 2S) system. During the modification a conversion program was developed for the output data of EAGLE's subroutine GRID to permit the data to be graphically displayed by IRIS workstations, using Plot3D. The code of program EAGLE was modified to make operational subroutine GRDPLOT (using DI-3000 Graphics Software Packages) on the NASA-LaRC SNS Computer System. How to implement graphically, the output data of subroutine GRID was determined on any NASA-LaRC graphics terminal that has access to the SNS Computer System DI-300 Graphics Software Packages. A Quick Reference User Guide was developed for the use of program EAGLE on the NASA-LaRC SNS Computer System. One or more application program(s) was illustrated using program EAGLE on the NASA LaRC SNS Computer System, with emphasis on graphics illustrations.

Houston, Johnny L.↗

Electrostatic Particle-In-Cell Code For Hypercube Computer

Code simulates two-dimensional motions of plasma particles in self-consistent electrostatic field and externally applied magnetic field developed for execution on Mark IIIfp hypercube computer. Based on generalization of one-dimensional particle-in-cell algorithm applicable to many different parallel computing architectures. Intermediate product of continuing effort to speed particle-in-cell computations by taking advantage of distributed-memory parallel computers like those of hypercube class.

Ferraro, Robert D.↗

Flexible Revision Of Data-Processing Communications

Distributed Objects Protocol Layer (DOPL) software system implements protocol for communications among software objects programmed in C++ computer language. DOPL is application-program interface (API). Enables communication of data without regard for which specific computer(s) and operating system(s) is (are) in use. No extension of the C++ language necessary for use of DOPL.

Burleigh, Scott C.↗

Noise Prediction

Through COSMIC, United Information Services, Inc., (UIS) in Raleigh, NC, purchased a software package consisting of two computer programs--NOIZ and RAYTR. These programs, enhanced by UIS for its particular applications, are used to provide computer analysis of noise level predictions for clients. Predictions are then used in design of new buildings or in remodeling existing plants.

Source record↗

Universal, computer facilitated, steady state oscillator, closed loop analysis theory and some applications to precision oscillators

The theory of oscillator analysis in the immittance domain should be read in conjunction with the additional theory presented here. The combined theory enables the computer simulation of the steady state oscillator. The simulation makes the calculation of the oscillator total steady state performance practical, including noise at all oscillator locations. Some specific precision oscillators are analyzed.

Benjamin Parzen↗

Simulation of Hazards and Poses for a Rocker-Bogie Rover

Provisions for specification of hazards faced by a robotic vehicle (rover) equipped with a rocker-bogie suspension, for prediction of collisions between the vehicle and the hazards, and for simulation of poses of the vehicle at selected positions on the terrain have been incorporated into software that simulates the movements of the vehicle on planned paths across the terrain. The software in question is that of the Web Interface for Telescience (WITS), selected aspects of which have been described in a number of prior NASA Tech Briefs articles. To recapitulate: The WITS is a system of computer software that enables scientists, located at geographically dispersed computer terminals connected to the World Wide Web, to command instrumented robotic vehicles (rovers) during exploration of Mars and perhaps eventually of other planets. The WITS also has potential for adaptation to terrestrial use in telerobotics and other applications that involve computer-based remote monitoring, supervision, control, and planning.

Backes, Paul↗

Using integrals of the state transition matrix for efficient transient-response computations

An iterative technique for the computation of lower-order state systems with poles at the origin (such as aircraft lateral dynamics) or with time-polynomial inputs is developed and demonstrated. The integrated input or output signals are computed using the integrals of the state transition matrix, thus reducing the system order and computation time. In an application to the lateral response of a DC-8 aircraft (Grunwald, 1981), this method required only 7824 multiplication or addition operations (at fourth order) to achieve the accuracy obtained in 15,012 operations by a conventional sixth-order computation.

Grunwald, A. J.↗

Comprehensive Modeling of the Apache With CAMRAD II

This paper presents a report of a multi year study of the U.S. Army LONGBOW APACHE (AH-64D) aircraft. The goals of this study were to provide the Apache Project Managers Office (PMO) with a broad spectrum of calibrated comprehensive and CFD models of the AH-64D aircraft. The goal of this paper is to present an overview of the comprehensive model which has been developed. The CAMRAD II computer code was chosen to complete this task. The paper first discusses issues that must be addressed when modeling the Apache using CAMRAD. The work required the acquisition of a data base for the aircraft and the development and application of a multidisciplinary computer model. Sample results from various parts of the model are presented. Conclusions with regard to the strengths and weaknesses of simulations based on this model are discussed.

Jones, Henry E.↗

Comprehensive Modeling of the Apache with CAMRAD II

This paper presents a report of a multi year study of the U.S. Army LONGBOW APACHE (AH-64D) aircraft. The goals of this study were to provide the Apache Project Managers Office (PMO) with a broad spectrum of calibrated comprehensive and CFD models of the AH-64D aircraft. The goal of this paper is to present an overview of the comprehensive model which has been developed. The CAMRAD II computer code was chosen to complete this task. The paper first discusses issues that must be addressed when modeling the Apache using CAMRAD. The work required the acquisition of a data base for the aircraft and the development and application of a multidisciplinary computer model. Sample results from various parts of the model are presented. Conclusions with regard to the strengths and weaknesses of simulations based on this model are discussed.

Jones, Henry E.↗

A laser based computer aided non-intrusive technique for full field flow characterization in macroscopic curved channels

This paper presents the application of a laser based, computer aided image processing technique for the nonintrusive evaluation of field velocities and accelerations in a 180 deg curved channel geometry, characteristic of inlet passages of the cowls of airbreathing aircraft engines. The method based on the illumination of the test section with a laser generated planar sheet of light, allows microscopic or macroscopic surveillance of fluid flow across or along large cross sections for relatively long (greater than 1 sec) periods of time. The method is Lagrangian in concept and permits identification and tracking of the same particle, thus facilitating construction of more comprehensive trajectories and the calculation of velocities and accelerations.

Braun, M. J.↗

Reduced-Order Modeling: New Approaches for Computational Physics

In this paper, we review the development of new reduced-order modeling techniques and discuss their applicability to various problems in computational physics. Emphasis is given to methods ba'sed on Volterra series representations and the proper orthogonal decomposition. Results are reported for different nonlinear systems to provide clear examples of the construction and use of reduced-order models, particularly in the multi-disciplinary field of computational aeroelasticity. Unsteady aerodynamic and aeroelastic behaviors of two- dimensional and three-dimensional geometries are described. Large increases in computational efficiency are obtained through the use of reduced-order models, thereby justifying the initial computational expense of constructing these models and inotivatim,- their use for multi-disciplinary design analysis.

Beran, Philip S.↗

Development of software fault-tolerance techniques

As computers become more widely used, and in particular as they become used in more safety critical applications, the reliability of the computer system and its software becomes more important. There is also an increasing need for high levels of reliability in applications involving very large numbers of inexpensive units where recall of the units would be disproportionately expensive. The nature of faults and the assumptions made by different approaches to correct operation are considered. The recovery block approach is described and a probabilistic analysis of its effectiveness, with and without correlated design errors is provided. Mechanisms for generating acceptance tests from specifications, and for providing recovery in the presence of asynchrony, are described. An analysis of, and design for, the provision of recovery blocks in the microprogram of the Bendix BDX930 processor is provided. An example of the use of recovery blocks in a simple operating system is also provided.

Melliar-Smith, P. M.↗

Some advances in digital flow visualization

The ability to visualize complex objects, concepts, interactions, and phenomena, to 'SEE' them in the mind's eye, has always been a fundamental component of the engineering discipline. Today, driven by increasingly demanding design requirements and an avalanche of data from powerful new computers and sophisticated experimental devices, the need to visualize data effectively is more important than ever before. This pressing need has resulted in the rapid increase in the use of computer-generated graphics in engineering. This is particularly true in the field of fluid dynamics where the internal structure of flow, not just surface or geometric effects, must be interpreted and communicated. This paper reports on several recent developments in the application of digital computer-generated graphics to engineering requirements for visualization of flow.

Belie, R. G.↗

Cyber Security: Big Data Think II Working Group Meeting

This presentation focuses on approaches that could be used by a data computation center to identify attacks and ensure malicious code and backdoors are identified if planted in system. The goal is to identify actionable security information from the mountain of data that flows into and out of an organization. The approaches are applicable to big data computational center and some must also use big data techniques to extract the actionable security information from the mountain of data that flows into and out of a data computational center. The briefing covers the detection of malicious delivery sites and techniques for reducing the mountain of data so that intrusion detection information can be useful, and not hidden in a plethora of false alerts. It also looks at the identification of possible unauthorized data exfiltration.

computer security↗