Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Code Validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Validation Studies of RELAP5-3D for High-Temperature Gas-Cooled Reactor Analysis Using a Refined RELAP5-3D Model of the High Temperature Test Facility

RELAP5-3D has been used extensively for high-temperature gas-cooled reactor (HTGR) analysis, but such analysis lies outside the validation basis for the code. Oregon State University (OSU) and the United States Department of Energy’s (DOE) Advanced Reactor Technologies (ART) – Gas-cooled reactor campaign worked together to design and operate the High Temperature Test Facility (HTTF) at OSU to provide validation data for prismatic HTGR thermal hydraulics analysis. Work using a previous RELAP5-3D model of HTTF demonstrated the ability to reproduce trends in HTTF data but an inability to reproduce the values measured in multiple experiments within the uncertainty. It was hypothesized that a new model with a finer radial nodalization would perform better for HTTF analysis. In this paper, we present the development of that more refined model and analyze HTTF experiments PG-27 and PG-29, a pressurized (PCC) and depressurized conduction cooldown (DCC) transient. Comparing PG-27 results to experimental data shows a better prediction of steady state and transient temperatures; however, a deeper dive reveals that better transient temperature predictions are a result of better initial conditions. The transient temperature rise in the core is comparable between the two models, but the legacy model predicts temperatures in the reflectors better. The new model demonstrates the ability to predict unique temperatures in each sector of the core during PG-29, capturing the azimuthal asymmetry; however, the temperature predictions still differ from measured temperatures. One hypothesis is that differences between the assumed and actual power distribution leads to the underprediction of the individual block temperatures. These results suggest that gaps and uncertainties in the measured boundary conditions for the HTTF tests do not allow to fully validate RELAP5-3D for prismatic HTGR analyses. The authors suspect that some of the differences between predicted and measured temperatures may be a result of uncertainties associated with HTTF itself rather than RELAP5-3D. We demonstrated improved validation for steady-state analysis, but significantly improved transient performance has yet to be recognized.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Calculation of neutron and gamma fluxes in support to the interpretation of measuring devices irradiated in the core periphery of the OSIRIS Material Testing Reactor

Technological irradiations carried out in material testing reactors (MTRs) are used to study the behavior of materials under irradiation conditions required by different types of nuclear power plants (NPPs). For MTRs, specific instrumentation is required for the experiment monitoring and for the characterization of irradiation conditions, in particular the flux of neutrons and photons. To measure neutron and photon flux in experimental locations, different sensors can be used, such as SPNDs (self-powered neutron detectors), SPGDs (self-powered gamma detectors) and ionization chambers. These sensors involve interactions producing ultimately a measurable electric current. Various sensors have been recently tested in the core periphery of the OSIRIS reactor (located at the CEA-Saclay center) in order to qualify their responses to the neutron and the photon flux. One of the key input data for this qualification is to have a relevant evaluation of neutron and gamma fluxes at the irradiation location. The objective of this work is to evaluate the neutron and the gamma flux in the core periphery of the OSIRIS reactor. With this intention, specific neutron-photonic three-dimensional calculations have been performed and are mainly based on the TRIPOLI-4{sup R} three-dimensional continuous-energy Monte Carlo code, developed by CEA (Saclay Center) and extensively validated against reactor dosimetry benchmarks. In the case of the OSIRIS reactor, TRIPOLI-4{sup R} code has been validated against experimental results based on neutron flux and nuclear heating measurements performed in ex-core and in-core experiments. In this work, simultaneous contribution of neutrons and gamma photons in the core periphery is considered using neutron-photon coupled transport calculations. Contributions of prompt and decay photons have been taken into account for the gamma flux calculation. Specific depletion codes are used upstream to provide the decay-gamma sources required by TRIPOLI-4 calculations. In this paper, the neutron-photonic calculation scheme used for the neutron-gamma flux evaluation in the OSIRIS core periphery will be first detailed. Then, a comparison of calculated and measured values of neutron and gamma fluxes will be introduced. (author)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Thermomechanical analysis and modeling of involute-shaped fuel plates using the Cheverton–Kelley experiments for the High Flux Isotope Reactor

Three research reactors with involute-shaped fuel plates are pursuing conversion from highly enriched uranium to low-enriched uranium fuel. Various core design and safety evaluation studies are essential to assess the feasibility of the conversion. The use of 3D computational multiphysics codes is being explored in these analyses and therefore they must undergo a thorough evaluation and quality assurance process due to their potential impact on nuclear safety. Here, the Cheverton and Kelley physical tests performed in the late 1960s to investigate the deflections of HFIR’s outer plate under uniform pressure and temperature fields are simulated by employing commercially available computational codes, with the goals to (1) verify and validate the models and numerical solvers implemented in the codes for thermomechanical analysis of involute reactor plates and (2) to develop a benchmark computational test to evaluate future versions of existing software or newly developed computational codes. The results of the simulations showed good agreement with each other as well as against the Cheverton–Kelley experimental data. Some minor deviations were observed for a few multiphysics cases and their potential origins and impact on the analysis results is investigated in the paper. The validated models increase the confidence in using multiphysics codes to evaluate existing or new LEU designs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Turbulence Modeling Verification and Validation

Computational fluid dynamics (CFD) software that solves the Reynolds-averaged Navier-Stokes (RANS) equations has been in routine use for more than a quarter of a century. It is currently employed not only for basic research in fluid dynamics, but also for the analysis and design processes in many industries worldwide, including aerospace, automotive, power generation, chemical manufacturing, polymer processing, and petroleum exploration. A key feature of RANS CFD is the turbulence model. Because the RANS equations are unclosed, a model is necessary to describe the effects of the turbulence on the mean flow, through the Reynolds stress terms. The turbulence model is one of the largest sources of uncertainty in RANS CFD, and most models are known to be flawed in one way or another. Alternative methods such as direct numerical simulations (DNS) and large eddy simulations (LES) rely less on modeling and hence include more physics than RANS. In DNS all turbulent scales are resolved, and in LES the large scales are resolved and the effects of the smallest turbulence scales are modeled. However, both DNS and LES are too expensive for most routine industrial usage on today's computers. Hybrid RANS-LES, which blends RANS near walls with LES away from walls, helps to moderate the cost while still retaining some of the scale-resolving capability of LES, but for some applications it can still be too expensive. Even considering its associated uncertainties, RANS turbulence modeling has proved to be very useful for a wide variety of applications. For example, in the aerospace field, many RANS models are considered to be reliable for computing attached flows. However, existing turbulence models are known to be inaccurate for many flows involving separation. Research has been ongoing for decades in an attempt to improve turbulence models for separated and other nonequilibrium flows. When developing or improving turbulence models, both verification and validation are important steps in the process. Verification insures that the CFD code is solving the equations as intended (no errors in the implementation). This is typically done either through the method of manufactured solutions (MMS) or through careful step-by-step comparisons with other verified codes. After the verification step is concluded, validation is performed to document the ability of the turbulence model to represent different types of flow physics. Validation can involve a large number of test case comparisons with experiments, theory, or DNS. Organized workshops have proved to be valuable resources for the turbulence modeling community in its pursuit of turbulence modeling verification and validation. Workshop contributors using different CFD codes run the same cases, often according to strict guidelines, and compare results. Through these comparisons, it is often possible to (1) identify codes that have likely implementation errors, and (2) gain insight into the capabilities and shortcomings of different turbulence models to predict the flow physics associated with particular types of flows. These are valuable lessons because they help bring consistency to CFD codes by encouraging the correction of faulty programming and facilitating the adoption of better models. They also sometimes point to specific areas needed for improvement in the models. In this paper, several recent workshops are summarized primarily from the point of view of turbulence modeling verification and validation. Furthermore, the NASA Langley Turbulence Modeling Resource website is described. The purpose of this site is to provide a central location where RANS turbulence models are documented, and test cases, grids, and data are provided. The goal of this paper is to provide an abbreviated survey of turbulence modeling verification and validation efforts, summarize some of the outcomes, and give some ideas for future endeavors in this area.

Rumsey, Christopher L.↗

Evaluating wind speed and power forecasts for wind energy applications using an open-source and systematic validation framework

Building on the verification and validation work developed under the Second Wind Forecast Improvement Project, this work exhibits the value of a consistent procedure to evaluate wind power forecasts. We established an open-source Python code base tailored for wind speed and wind power forecast validation, WE-Validate. The code base can evaluate model forecasts with observations in a coherent manner. To demonstrate the systematic validation framework of WE-Validate, we designed and hosted a forecast evaluation benchmark exercise. We invited forecast providers in industry and academia to participate and submit forecasts for two case studies. We then evaluated the submissions with WE-Validate. Our findings suggest that ensemble means have reasonable skills in time series forecasting, whereas they are often inferior to single ensemble members in wind ramp forecasting. Adopting a voting scheme in ramp forecasting that allows ensemble members to detect ramps independently leads to satisfactory skill scores. Throughout this document, we also emphasize the importance of using statistically robust and resistant metrics as well as equitable skill scores in forecast evaluation.

17 WIND ENERGY↗

Benchmark Calculation for BEAVRS Cycles 1 and 2 Using the SCALE 6.3/Polaris–PARCS v3.4.2 Code Package

This study performed the benchmark calculation for BEAVRS to validate the SCALE 6.3/Polaris–PARCS v3.4.2 code package with the ENDF/B-VII.1 56-group library, comparing the simulated results with the measured data. The benchmark results will be used in evaluating uncertainties of the SCALE/Polaris–PARCS code package for pressurized water reactor physics analysis for key nuclear parameters such as reactivity, control bank worth, temperature coefficients, and pin and assembly power peaking factors. This report details plant and fuel design specifications and input data for SCALE/Polaris as well as GenPMAXS and PARCS. Additionally, detailed information is provided for all the input and output files produced for the benchmark calculations. The benchmark results are summarized herein so that they can be used in evaluating uncertainties for key nuclear parameters with other benchmark results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development and validation of two-phase flow models and critical heat flux prediction for the highly-scalable CFD code NEK-2P

A project is underway to develop, verify and validate an advanced two-phase flow modeling capability for the highly-scalable high-performance CFD code NEK5000[1]. The goal of the project is to develop a new two-phase version of the NEK5000code, named NEK-2P, to simulate the two-phase flow and heat transfer phenomena that occur in a Boiling Water Reactor (BWR) fuel bundle under various operating conditions. The NEK-2P two-phase flow models follow the approach used for the Extended Boiling Framework [2-3] previously developed at Argonne, but include more fundamental physical models of boiling phenomena and advanced numerical algorithms for improved computational accuracy, robustness, and computational speed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Four-Dimensional Finite-Orbit-Width Fokker-Planck Code with Sources, for Neoclassical/Anomalous Transport Simulation of Ion and Electron (Final Technical Report)

Within the US Department of Energy/Office of Fusion Energy magnetic fusion research program, there is an important whole-plasma-modeling need for a radio-frequency/neutral-beam-injection (RF/NBI) transport-oriented finite-difference Fokker-Planck (FP) code with combined capabilities for 4D (2R2V) geometry near the fusion plasma periphery, and computationally less demanding 3D (1R2V) bounce-averaged capabilities for plasma in the core of fusion devices. Demonstration of proof-of-principle achievement of this goal has been carried out in research carried out under Phase I of the SBIR award. Two DOE-sponsored codes, the CQL3D bounce-average Fokker-Planck code in which CompX has specialized, and the COGENT 4D, plasma edge-oriented Fokker-Planck code which has been constructed by Lawrence Livermore National Laboratory and Lawrence Berkeley Laboratory scientists, where coupled. Coupling was achieved by using CQL3D calculated velocity distributions including an energetic tail resulting from NBI, as boundary conditions for the COGENT code over the two-dimensional velocity space on a spatial interface (flux) surface at a given radius near the plasma periphery. The finite-orbit-width fast ions from the CQL3D distributions penetrated into the peripheral plasma modeled by the COGENT code. This combined code demonstrates the feasibility of the proposed 3D/4D code. By combining these codes, the greatest computational efficiency is achieved subject to present modeling needs in toroidally symmetric magnetic fusion devices. The more efficient 3D code can be used in its regions of applicability, coupled to the more computationally demanding 4D code in higher collisionality edge plasma regions where that extended capability is necessary for accurate representation of the plasma. More efficient code leads to greater use and utility of the model. An ancillary aim of the project is to make the combined 3D/4D code user friendly. Achievement of full-coupling of these two Fokker-Planck codes will advance computational modeling of plasma devices important to the USDOE magnetic fusion energy program, in particular the DIII-D tokamak at General Atomics, San Diego, the NSTX spherical tokamak at Princeton, New Jersey, and the MST reversed-field-pinch Madison, Wisconsin. The validation studies of the code against the experiments will improve understanding of physics important for magnetic fusion, and will increase our design capabilities for achieving the goals of the International Tokamak Experimental Reactor (ITER) project in which the US is a participant and which seeks to demonstrate at least a factor of five in fusion power production divided by input power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uncertainty Quantification and Sensitivity Analysis for Coupled VERA-CS and FRAPCON

The current nuclear power plant fleet in the U.S. is facing numerous challenges economically ranging from low natural gas price to the rapidly growing renewable energy sources such as wind and solar power. In order for the nuclear industry to keep the viability of its operating fleet, new innovations have to be introduced to lower the costs to operate the fleet. One area that could contribute to the cost reduction is to lower the fuel cycle cost and improve the plant safety through initiatives such as higher burnup fuel and accident tolerant fuel. At the same time, the nuclear industry has to address future challenges on the horizon such as load following and other flexible operating strategies as well as those associated with new regulations such as 10 CFR 50.69 and 10 CFR50.46c etc. All these require coupled analysis of core neutronics, thermal hydraulics and fuel performance, which necessitates the development of a multi-physics toolkit. Since different models, assumptions, and fidelities have gone into various computer codes, how to consistently propagate uncertainties in a multi-physics environment warrants careful evaluation. The U.S. DOE's Light Water Reactor Sustainability (LWRS) Program initiated a project to develop analytical capabilities to support the industry to address these challenges. The general idea behind the initiative was the development of an integrated multiphysics evaluation model. This integrated evaluation model is called LOTUS which stands for LOCA Toolkit for the U.S. Light Water Reactors. The focus of LOTUS is to establish the automation of the interface between the five disciplines. LOTUS framework ensures that uncertainties can be easily propagated to solve the problems forward and backward (inverse) with large numbers of simulations. The objective of this work is to perform uncertainty quantification (UQ) and sensitivity analysis (SA) on a coupling of CASL's Virtual Environment for Reactor Applications-Core Simulator (VERA-CS) and NRC's fuel performance code FRAPCON. The work presented herein is a subset of the overall LOTUS framework. The figures of merit (FOM) selected for analysis are minimum departure from nucleate boiling ratio (MDNBR), maximum fuel centerline temperature (MFCT), and the gap conductance at peak power (GCPP). All FOM are obtained at the end of the of a depletion case for a half cycle lasting 263 days. The minimum is taken over all spatial location for each pin at the end of the half cycle. This value is calculated in VERACS alone and has been analyzed in previous work by Brown and Zhang. The MFCT is available in both VERA-CS and FRAPCON, but is calculated via different methods (see Model Inconsistencies section for more details). For this work, only the FRAPCON values are reported due to the code's maturity from extensive validation in fuel performance. Previous work includes SA on a standalone nuclear fuel performance code VTT-modified FRAPCON- 3.4 by Ikonen. The GCPP is the gap conductance at the location corresponding to maximum power in the fuel rod. This value is available in FRAPCON alone and highlights the capability of LOTUS to obtain unique fuel performance metrics for each pin in a core simulation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Computational Modeling, Simulation and Analysis of the RPI Walthousen Reactor Critical Facility (RCF)

The Walthousen Reactor Critical Facility (RCF), located in Schenectady, New York, is currently owned and operated by Rensselaer Polytechnic Institute (RPI). The facility was originally constructed by the American Locomotive Company (ALCO) for the research and development of small, portable reactors. Originally designed for highly-enriched uranium fuel, the prototype reactor first came online in August 26, 1956, and was transferred to RPI ownership in 1963. Several changes to the reactor's design and operation have been made, the most notable of which was the conversion from high-enriched uranium to low-enriched uranium fuel. The RCF is an open-pool critical assembly that operates at a low power with a license limit of less than 100 watts. This low operating power permits a much greater flexibility in configuration and operation as compared to other research reactors. Because of this, experiments may be designed that would be unfeasible for research reactors that operate at much higher powers. The RCF's functional capabilities provide opportunities to perform several reactor experiments and measurements, such as: core criticality experiments, differential and integral rod worth measurements, moderator temperature coefficient of reactivity calculations, critical rod height and critical water height measurements, etc.. These experiments are regularly performed in conjunction with RPI course-work education and Senior Reactor Operator (SRO) training. The unique capabilities and experiments that may be performed in the RCF are particularly useful for validating certain aspects of computational analysis codes. A computational model of the RCF reactor has been previously generated and validated using the Monte Carlo N-Particle (MCNP) code. For the purpose of future experiments, this model is also being adapted for use with the SHARP Toolset, which includes the PROTEUS neutronics code, the Nek5000 fluid dynamics code, and the Diablo structural mechanics code. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Viscous equilibrium computations using program LAURA

Modifications have been made to the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) that enable it to compute viscous airflows under the assumption of thermal and chemical equilibrium. Equilibrium thermodynamic and transport property information are input to the code via curve fits. The periodic updating of this information enables the equilibrium algorithm to perform at a computational rate that is only a small percentage larger than the rate associated with the perfect-gas algorithm. Presented in this article are the results of the initial validation of the modified code. Solutions for surface pressure and heating are presented for the flow over slender and blunt cones at realistic reentry conditions. LAURA solutions are compared with those produced by a viscous shock-layer method, and, for one case considered, with heat transfer data from a flight experiment. For both pressure and heating, the agreement is good. In general, differences in pressure of a few percent were noted, while differences in heating rates were in the 5-10 percent range.

Greene, Francis A.↗

Flux in a 1D-Reactor Cell by Response Matrix

Legacy computational reactor physics software tools and protocols currently used in support of the Advanced Test Reactor (ATR) core fuel management and safety assurance, and to some extent, experiment management, are inconsistent with the state of modern nuclear engineering practice. Thus, they are difficult, if not impossible, to verify and validate (V and V) according to modern standards. Furthermore, the legacy staff knowledge required for effective application of their application and protocols from the 1960's and 1970's is rapidly being lost due to staff turnover and retirements. In late 2009, the Idaho National Laboratory (INL) initiated a focused effort, the ATR Core Modeling Update Project, to address this situation through the introduction of modern high-fidelity transport theory based computational software and models to replace the legacy methods, with appropriate (V and V) protocols according to applicable national standards. The new computational tools include: - The 2-dimensional HELIOS deterministic transport code for integrated ATR core fuel and experiment management and Core Safety Analysis Package (CSAP) physics data generation. The MCNP5 3-dimensional stochastic simulation (Monte Carlo) code for verification and validation applications and for specialized ATR core analysis along with its longstanding traditional role in experiment support - The 2-dimensional deterministic NEWT transport code and the 3-dimensional KENO6 stochastic simulation code, with their SCALE-based support infrastructure for use in V and V applications and as supporting modules for sensitivity-uncertainty analysis via the TSUNAMI system. The ATTILA 3-dimensional discrete-ordinates transport code for specialized experiment support and possibly additional applications. Regardless of application, every neutron transport code, new or legacy, requires verification. The aim of this presentation is to provide a neutron transport benchmark for a simple 1D-reactor cell in plane geometry. The benchmark finds use as a standard of comparison for the codes listed above intended for the ATR upgrade. The method developed here is in contrast to the finite Fourier transform solution found in Ref. 1, which is limited to isotropic scattering and particularly difficult to numerically implement unless the total cross section is constant over the cell.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Treatment of the uncertainties in fuel rod design analysis

This paper describes the results of the effort performed in order to systematically treat uncertainties in the fuel rod performance analysis with the aim at providing conservative results while also showing the uncertainty of the results (Best Estimate plus Uncertainty). 3 distinct groups of uncertainties affect the prediction of the fuel performance code: -) code models and material properties, -) fuel rod as fabricated parameters, and -) core power and power distribution determination. While the first two groups may be easily covered by statistical analysis, the last group requires good knowledge of the origin of the uncertainties. Especially in tall PWR and VVER-1000 cores where the possibility of fuel assembly bowing affects the inter-assembly gap width generating an uncertainty. In general, this parameter evolves during the residence of the fuel assembly in the core. Several methodological approaches to the core power and power distribution are compared using the TRANSURANUS code. TRANSURANUS is an integral '1.5D' code assuming perfect cylindrical symmetry of the fuel rod and only limited coupling in the axial direction. Core neutron transport, including pin-wise power distributions, are calculated by the nodal code ANDREA. As an example of a practical application, the study of the fuel rod response to the VVER-1000 Condition 2 transient (unintentional dilution of the boric acid in the primary circuit) is shown as well as an example of application of the same statistical approach to the validation of the TRANSURANUS code using the in-pile measurements in the Halden reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Standard Problems for CFD Validation for NGNP - Status Report

The U.S. Department of Energy (DOE) is conducting research and development to support the resurgence of nuclear power in the United States for both electrical power generation and production of process heat required for industrial processes such as the manufacture of hydrogen for use as a fuel in automobiles. The project is called the Next Generation Nuclear Plant (NGNP) Project, which is based on a Generation IV reactor concept called the very high temperature reactor (VHTR). The VHTR will be of the prismatic or pebble bed type; the former is considered herein. The VHTR will use helium as the coolant at temperatures ranging from 250°C to perhaps 1000°C. While computational fluid dynamics (CFD) has not previously been used for the safety analysis of nuclear reactors in the United States, it is being considered for existing and future reactors. It is fully recognized that CFD simulation codes will have to be validated for flow physics reasonably close to actual fluid dynamic conditions expected in normal operational and accident situations. The “Standard Problem” is an experimental data set that represents an important physical phenomenon or phenomena, whose selection is based on a phenomena identification and ranking table (PIRT) for the reactor in question. It will be necessary to build a database that contains a number of standard problems for use to validate CFD and systems analysis codes for the many physical problems that will need to be analyzed. The first two standard problems that have been developed for CFD validation consider flow in the lower plenum of the VHTR and bypass flow in the prismatic core. Both involve scaled models built from quartz and designed to be installed in the INL’s matched index of refraction (MIR) test facility. The MIR facility employs mineral oil as the working fluid at a constant temperature. At this temperature, the index of refraction of the mineral oil is the same as that of the quartz. This provides an advantage to the optics used for data gathering. Particle image velocimetry (PIV) is used to take the data. The first standard problem represents several flow physics expected to be present in the lower plenum of the prismatic VHTR. In the lower plenum, heated helium coolant in the form of jets issues downward into the plenum and is then forced to turn ninety degrees and flow toward the exit duct. The lower plenum is filled with cylindrical graphite posts that hold up the core. Figure S-1 provides a plan view of the lower plenum. The red circles represent support posts holding up columns of heated blocks. Grey circles represent support posts under columns of reflector blocks. Helium enters the lower plenum at the junctions of the hexagonal blocks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SEM Milestone Report for MARMOT Validation Project

MARMOT is a meso-scale fuel code under development by NEAMS designed to predict the microstructure evolution of fuel materials to determine updated thermal and mechanical property models. These updated models can be used by engineering scale codes such as BISON. To support its development and validation the MARMOT Validation Project (MVP) was initiated and consists of extensive microstructure and thermal characterization of U-10Zr fuel material before and at discreet levels of irradiation. This report summarizes the SEM and EDS characterization of the lowest burnup samples (1.5% FIMA) and how they compare to pre-irradiation SEM and EDS.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Beyond Guesswork: Code Verification for Acoustic Duct Mode Prediction

The code used in the work (Swirl) is a frequency-domain linearized Euler equation solver that is designed to predict the effect of acoustic liners on acoustic modes propagating in realistic sheared and swirling mean flows, guiding the design of more efficient liner configurations. The purpose of this study is to validate Swirl using the Method Of Manufactured Solutions (MMS). This study also investigated the effect of the integration and spatial differencing methods on the convergence for a given Manufactured Solution. In addition, the effect of boundary condition implementation was tested. Through rigorous validation of the Swirl code using the MMS, this research underscores the significance of integration and spatial differencing methods on convergence, evaluates boundary condition implementations, and systematically assesses the impact of various filters.

Code Verification↗

OPEN-CODE, REAL-TIME EMULATION TESTBED OF GRID-CONNECTED TYPE-3 WIND TURBINE SYSTEM WITH HARDWARE VALIDATION

This paper presents the design and development of an open-code Type-3 wind turbine virtual-testbed for real-time simulations. The proposed testbed includes the bare code for all the models required to emulate a Type-3 wind turbine system: the Doubly-Fed Induction Generator (DFIG) dynamic model, single-mass drive train, wind turbine system, and average model of the back to back power. This testbed can be executed in PC-layer for offline simulations or can be executed in real-time on the National Instruments (NI)-CompactRIO (cRIO) platform. The discrete-time models are implemented on the Field Programmable Gate Array (FPGA), using LabVIEW, and validated against a physical hardware setup. The emulated stator and rotor currents and DC-link voltage are compared against physical measurements creating a validated platform independent from third-party models and suitable for applications in real-time. The proposed testbed is intended to be available to researchers, wind turbine manufacturers, and utility companies to perform tests using a validated platform to verify proposed control designs of DFIG wind turbines.

Ferrari Maglia, Max↗

Validation of MPACT BWR capabilities against critical experiments

Over the years, significant validation work for the neutronics code MPACT has been performed against zero-power critical benchmarks and measured data from operating nuclear power plants. As a part of the Modeling and Analysis of Exelon BWRs for Eigenvalue and Thermal Limits Predictability project, new validation efforts relevant to boiling water reactor (BWR) core applications have been performed. This paper presents the results of the critical experiment portion of the BWR validation efforts for MPACT. The Kritz-4 experiments and IPEN/MB-01 BWR-relevant configurations are modeled with MPACT. The Kritz-4 BWR critical experiments were performed at both cold and hot conditions, which is a unique feature among other critical experiment facilities. The MPACT results with linear source (LS) Method of Characteristics (MOC) have very good agreement with the measured criticality. When using the 60-group BWR library with LS and P2 scattering, the maximum k{sub eff} error is 109 pcm, and the average cold-hot bias is only -0.11 pcm/K. The fission rate distributions of MPACT are also verified with Serpent calculations. For the IPEN facility, two configurations are considered: one with a large central void, and one with a cruciform control rod. The MPACT k{sub eff} errors are less than 50 pcm for all IPEN problems. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗