SEARCH · Engineering Papers
Results for “COMPOSITE MODELS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Linkages Between Ozone-depleting Substances, Tropospheric Oxidation and Aerosols
Coupling between the stratosphere and the troposphere allows changes in stratospheric ozone abundances to affect tropospheric chemistry. Large-scale effects from such changes on chemically produced tropospheric aerosols have not been systematically examined in past studies. We use a composition-climate model to investigate potential past and future impacts of changes in stratospheric ozone depleting substances (ODS) on tropospheric oxidants and sulfate aerosols. In most experiments, we find significant responses in tropospheric photolysis and oxidants, with small but significant effects on methane radiative forcing. The response of sulfate aerosols is sizeable when examining the effect of increasing future nitrous oxide (N2O) emissions. We also find that without the regulation of chlorofluorocarbons (CFCs) through the Montreal Protocol, sulfate aerosols could have increased by 2050 by a comparable amount to the decreases predicted due to relatively stringent sulfur emissions controls. The individual historical radiative forcings of CFCs and N2O through their indirect effects on methane (−22.6mW/sq. m for CFCs and −6.7mW/sq. m for N2O) and sulfate aerosols (−3.0mW/sq. m for CFCs and +6.5mW/sq. m for N2O when considering the direct aerosol effect) discussed here are non-negligible when compared to known historical ODS forcing. Our results stress the importance of accounting for stratosphere-troposphere, gas-aerosol and composition-climate interactions when investigating the effects of changing emissions on atmospheric composition and climate.
Dressed Polyakov loop and flavor dependent phase transitions
The chiral condensate and dressed Polyakov loop at finite temperature and density have been investigated in the framework of the N{sub f}=2+1 Nambu-Jona-Lasinio (NJL) model with two degenerate u, d quarks and one strange quark. In the case of explicit chiral symmetry breaking with physical quark masses, it is found that the phase transitions for light u, d, and s quark are sequentially happened, and the separation between the transition lines for different flavors becomes wider and wider with the increase of baryon density. For each flavor, the pseudocritical temperatures for chiral condensate and dressed Polyakov loop differ in a narrow transition range in the lower baryon density region, and the two transitions coincide in the higher baryon density region.
Neutrino Phenomenology of gauged L{sub {mu}}--L{sub {tau}}: MINOS and beyond
If a Z'gauge boson from a gauged L{sub {mu}}--L{sub {tau}} symmetry is very light, it is associated with a long-range leptonic force. In this case the particles in the Sun create via mixing of the Z'with the Standard Model Z a flavor-dependent potential for muon neutrinos in terrestrial long-baseline experiments. The potential changes sign for anti-neutrinos and hence can lead to apparent differences in neutrino and anti-neutrino oscillations without introducing CP or CPT violation. This could for instance explain the recently found discrepancy in the MINOS experiment. We obtain the associated parameters of gauged L{sub {mu}}--L{sub {tau}} required to explain this anomaly. The consequences for future long-baseline experiments are also discussed, and we compare the scenario to standard NSIs. When used to explain MINOS, both approaches have severe difficulties with existing limits.
Composite resonances at a 10 TeV muon collider
We investigate the reach for resonances of the composite Higgs models at a 10 TeV μ + μ – collider with up to 10 ab –1 luminosity. The strong dynamics sector is modeled by the minimal coset SO(5)/SO(4), where vector resonances are in (3, 1) of SO(4) and fermions are in (2, 2). Various production and decay channels are studied. For the spin-1 resonances, the projections are made based on the radiative return and vector boson fusion production channels. The muon collider can cover most of the kinematically allowed mass range and can measure the coupling gρ to percent level. For the fermionic resonances (i.e. the top partners), pair production easily covers the resonance mass below 5 TeV, while single production extends the reach to 6 TeV for a small ξ = 0.015.
Benchmarking of Computational Models for NDE and SHM of Composites
Ultrasonic wave phenomena constitute the leading physical mechanism for nondestructive evaluation (NDE) and structural health monitoring (SHM) of solid composite materials such as carbon-fiber-reinforced polymer (CFRP) laminates. Computational models of ultrasonic guided-wave excitation, propagation, scattering, and detection in quasi-isotropic laminates can be extremely valuable in designing practically realizable NDE and SHM hardware and software with desired accuracy, reliability, efficiency, and coverage. This paper presents comparisons of guided-wave simulations for CFRP composites implemented using three different simulation codes: two commercial finite-element analysis packages, COMSOL and ABAQUS, and a custom code implementing the Elastodynamic Finite Integration Technique (EFIT). Comparisons are also made to experimental laser Doppler vibrometry data and theoretical dispersion curves.
Revisit the radiative decays of J/{psi} and {psi}{sup '}{yields}{gamma}{eta}{sub c}({gamma}{eta}{sub c}{sup '})
With the new measurements of J/{psi} and {psi}{sup '}{yields}{gamma}{eta}{sub c}({gamma}{eta}{sub c}{sup '}) from the CLEO and BES-III collaboration, we reinvestigate the intermediate meson loop (IML) contributions to these radiative decays in association with the quark model M1 transitions in an effective Lagrangian approach. It shows that the ''unquenched'' effects due to the intermediate hadron loops can be better quantified by the new data for J/{psi}{yields}{gamma}{eta}{sub c}. Although the IML contributions are relatively small in J/{psi}{yields}{gamma}{eta}{sub c}, they play a crucial role in {psi}{sup '}{yields}{gamma}{eta}{sub c}({gamma}{eta}{sub c}{sup '}). A prediction for the IML contributions to {psi}(3770){yields}{gamma}{eta}{sub c}({gamma}{eta}{sub c}{sup '}) is made. Such unquenched effects allow us to reach a coherent description of those three radiative transitions, and gain some insights into the underlying dynamics.
Toward a unified description of hadro- and photoproduction amplitudes
The near-term objectives of the research program at the Data Analysis Center are established within the context of the existing partial wave analyses available through the online suite of analysis and database codes accessible through SAID, the Scattering Analysis Interactive Database. This presentation reviews the efforts to determine a model independent method to obtain sets of partial wave amplitudes for strong and electromagnetic reactions, the interpretation of the amplitudes in terms of the excited states of the nucleon, the role of new precision unpolarized and polarized data, and new developments aimed at determining the photoproduction mulitpoles in a unitary, coupled-channel approach. The Chew-Mandelstam technique is discussed and applied to the problem of the S-wave pion- and eta-photoproduction amplitudes. The resulting eta production amplitudes exhibit the expected resonant behavior near the eta production threshold. Application of this method to a unified description of the hadro- and photoproduction amplitudes is discussed.
Negative-parity {Lambda}{sub Q} baryons in the baryon-meson continuum
The negative-parity charmed baryons are investigated by employing the quark model as well as the effective baryon meson model with a bound state embedded in the continuum. Especially the mass difference between the J{sup P} 1/2{sup -} and 3/2{sup -}{Lambda}{sub c}{sup +} baryons is discussed. The observed value of this mass splitting is almost the same as that of {Xi}{sub c}, about 30 MeV. It is found that most of this splitting can be reproduced by assuming a simple qqQ configuration. The coupling to the baryon-meson scattering state may enlarge the splitting as it does for the {Lambda}(1405)(1/2{sup -}) and {Lambda}(1520)(3/2{sup -}) case. We investigate this coupling effect and find that with an appropriately modified coupling or the pole energy, the peak can be reproduced.
Single and Central Diffractive Higgs Production at the LHC
The single and central diffractive production of the Standard Model Higgs boson is computed using the diffractive factorization formalism, taking into account a parametrization for the Pomeron structure function provided by the H1 Collaboration. We compute the cross sections at NLO accuracy for the gluon fusion process, since it is the leading mechanism for the Higgs boson production. The gap survival probability is also introduced to include the rescattering corrections due to spectator particles present in the interaction. The diffractive ratios are predicted for proton-proton collisions at the LHC, since the beam luminosity is favorable to the Higgs boson detection. These results provide updated estimations for the fraction of single and central diffractive events in the LHC kinematical regime.
Tensor properties of the nucleon
We report in the present talk recent results of the tensor properties of the nucleon within the framework of the chiral quark-soliton model. The tensor and anomalous tensor magnetic form factors are calculated for the momentum transfer up to Q{sup 2}{<=}1 GeV{sup 2} and at a renormalization scale of 0.36 GeV{sup 2}. The main results are summarized as follows: the flavor tensor charges of the nucleon are yielded as {delta}u = 1.08, {delta}d = -0.31, {delta}s -0.01, while the up and down anomalous tensor magnetic moments are evaluated as {kappa}{sub T}{sup u} = 3.56 and {kappa}{sub T}{sup d} = 1.83, respectively. The strange anomalous tensor magnetic moment turns out to be {kappa}{sub T}{sup s} 0.2{approx}-0.2, compatible with zero. We discuss their physical implications, comparing them in particular with those from the lattice QCD.
Planck intermediate results. XXI. Comparison of polarized thermal emission from Galactic dust at 353 GHz with interstellar polarization in the visible
The Planck survey provides unprecedented full-sky coverage of the submillimetre polarized emission from Galactic dust. In addition to the information on the direction of the Galactic magnetic field, this also brings new constraints on the properties of dust. The dust grains that emit the radiation seen by Planck in the submillimetre also extinguish and polarize starlight in the visible. Comparison of the polarization of the emission and of the interstellar polarization on selected lines of sight probed by stars provides unique new diagnostics of the emission and light scattering properties of dust, and therefore of the important dust model parameters, composition, size, and shape. Using ancillary catalogues of interstellar polarization and extinction of starlight, we obtain the degree of polarization, p V , and the optical depth in the V band to the star, τ V . Toward these stars we measure the submillimetre polarized intensity, P S , and total intensity, I S , in the Planck 353 GHz channel. We compare the column density measure in the visible, E ( B - V ), with that inferred from the Planck product map of the submillimetre dust optical depth and compare the polarization direction (position angle) in the visible with that in the submillimetre. For those lines of sight through the diffuse interstellar medium with comparable values of the estimated column density and polarization directions close to orthogonal, we correlate properties in the submillimetre and visible to find two ratios, R S/V = ( P S /I S )/( p V /τ V ) and R P/p = P S / p V , the latter focusing directly on the polarization properties of the aligned grain population alone. We find R S/V = 4.2, with statistical and systematic uncertainties 0.2 and 0.3, respectively, and R P/p = 5.4 MJy sr -1 , with uncertainties 0.2 and 0.3 MJy sr -1 , respectively. Our estimate of R S/V is compatible with predictions based on a range of polarizing dust models that have been developed for the diffuse interstellar medium. This estimate provides new empirical validation of many of the common underlying assumptions of the models, but is not yet very discriminating among them. However, our estimate of R P/p is not compatible with predictions, which are too low by a factor of about 2.5. This more discriminating diagnostic, R P/p , indicates that changes to the optical properties in the models of the aligned grain population are required. These new diagnostics, together with the spectral dependence in the submillimetre from Planck , will be important for constraining and understanding the full complexity of the grain models, and for interpreting the Planck thermal dust polarization and refinement of the separation of this contamination of the cosmic microwave background.
{Sigma}{sub c}D and {Lambda}{sub c}D states in a chiral quark model
The S-wave {Sigma}{sub c}D and {Lambda}{sub c}D states with isospin I=1/2 and spin S=1/2 are dynamically investigated within the framework of a chiral constituent quark model by solving a resonating group method equation. The results show that the interaction between {Sigma}{sub c} and D is attractive, which consequently results in a {Sigma}{sub c}D bound state with a binding energy of about 5-42 MeV, unlike the case of the {Lambda}{sub c}D state, which has a repulsive interaction and thus is unbound. The channel-coupling effect of {Sigma}{sub c}D and {Lambda}{sub c}D is found to be negligible owing to the fact that the gap between the {Sigma}{sub c}D and {Lambda}{sub c}D thresholds is relatively large and the {Sigma}{sub c}D and {Lambda}{sub c}D transition interaction is weak.
Building Towards Discovery: Preparing for New Physics at the LHC [Final papers]
Particle physics today is at a crossroads. The Standard Model (SM) has survived four decades of experimental scrutiny and spurred multiple landmark discoveries, culminating with the 2012 discovery of the Higgs boson at the Large Hadron Collider (LHC). Yet we know that this model is incomplete. We live in a universe dominated by matter and energy unaccounted for by the SM– and the Higgs boson itself is improbably light. It falls to the current generation of high-energy physicists to go beyond the model and enter a new era of discovery. Andeen is leading a new research group at the University of Texas at Austin (UT-Austin) that is endeavoring to reveal novel physical phenomena through the discovery of new particles with the ATLAS detector at the LHC. A key element of our experience thus far has been collaborating closely with theorists to identify both interesting new physics models. In addition we work closely with electrical engineers in detector development. Our approach is therefore unique in its integration of theory, analysis and instrumentation, and is encapsulated in a three-pronged strategy. First is the essential task of analyzing our rapidly expanding dataset. I am directing my group in searches for vector-like quarks (VLQs). Should they exist, these hypothetical particles would indicate physics scenarios beyond the SM. Experimental constraints suggest VLQs decay preferentially to a third generation quark and a Higgs, W or Z boson. Today at 13 TeV, both multi-lepton (electron and muon) and jet substructure signatures are sensitive to identifying the VLQ decay products. The large Run 2 dataset (collected through 2018) of up to 150 fb -1 will allow us to simultaneously use multi-lepton signatures with jet-substructure in searches for new physics. UT-Austin is well positioned to be a leader in this area. Prof. P. Onyisi’s postdoctoral researchers and graduate students are searching for ttH signatures in three- and four-lepton channels and we benefit from their experience. We are also aided by the availability of the Texas Advanced Computing Center, which provides us with easy access to several high performance computing (HPC) systems. My previous experience in VLQ searches propels the work today. I have published both the first investigation into the single production of top partners (signatures of composite Higgs Models) of any LHC experiment 1 as well as one of the first analyses utilizing jet-substructure techniques to search for the single production of vector-like quarks. 2 Adding to this is my group’s work with the Liquid Argon (LAr) calorimeter, the primary instrument we use in detecting electrons. Second, my group is contributing to the operations of the LAr calorimeter while preparing to install and commission new electronic hardware (the Phase 1 upgrade) to this crucial component of the ATLAS detector. I have played a leading role in the development of a critical, radiation-hard, high-speed Analog-to-Digital Convertor (ADC) that is essential inselecting data collected by the LAr calorimeter. 3 This upgrade will improve the e!ciency with which we can select events in our detector. Postdoctoral researcher N. Nikiforou (based at CERN May 2016 onward) and graduate students (one based at CERN from the start of 2018 onward, with one additional graduate students from summer 2018) are growing our already deep experience in the operation of the LAr calorimeter to prepare for installation and commissioning of the new trigger readout in 2018-2019. My group will then be positioned to be the first to exploit the potential of the improved triggers in our multi-lepton searches for new physics. Third, a suite of preparations for a major detector upgrade, scheduled to be completed in 2024, are underway. My group is building hardware that will improve the electronic readout of the ATLAS detector. I am partnering with a group in the Electrical and Computer Engineering (ECE) Department at UT-Austin (Prof. N. Sun) to employ his work at the cutting edge of ADC research. We will support an ECE grad student for the layout of this design, and collaborate with engineering groups at Nevis Laboratory and the Electrical Engineering Department (Prof. P. Kinget) at Columbia University to integrate our ADC with gain selection circuits. We will provide this critical component of the ASIC at the challenging boundary of the analog and digital signals in the LAr calorimeter readout chain. Furthermore UT-Austin will lead the testing of this device during development and production (approximately 55,000 four-channel chips). This effort compliments my work as the deliverables manager for the LAr front-end ASICs for the US ATLAS HL-LHC project and strengthens the US commitment to that upgrade.In so doing, my group at the UT-Austin will be at the forefront of efforts to probe the structure of the universe to an unmatched degree both at the current LHC and with its future upgrades. Through both the ongoing analysis of data at the ATLAS detector and improvements to the detector itself, an answer to what lies beyond the SM may come within our grasp. My background in instrumentation and analysis allows my group to establish a singular research effort on the ATLAS experiment. In addition to answering fundamental questions about the subatomic world, the technologies developed could advance the broader scientific community and result in valuable spin-offs.
Hyperstealth dark matter and long-lived particles
A new dark matter candidate is proposed that arises as the lightest baryon from a confining 𝑆𝑈(𝑁) gauge theory which equilibrates with the Standard Model only through electroweak interactions. Surprisingly, this candidate can be as light as a few GeV. The lower bound arises from the intersection of two competing requirements: (i) the equilibration sector of the model must be sufficiently heavy, at least several TeV, to avoid bounds from colliders, and (ii) the lightest dark meson (that may be the dark 𝜂′, 𝜎, or the lightest glueball) has suppressed interactions with the SM and must decay before big bang nucleosynthesis. The low-energy dark sector consists of one flavor that is electrically neutral and an almost electroweak singlet. The dark matter candidate is the lightest baryon consisting of 𝑁 of these light flavors leading to a highly suppressed elastic scattering rate with the Standard Model (SM). The equilibration sector consists of vectorlike dark quarks that transform under the electroweak group, ensuring that the dark sector can reach thermal equilibrium with the SM in the early Universe. The lightest dark meson lifetimes vary between 10 −3 ≲ 𝑐𝜏 ≲ 10 7 m, providing an outstanding target for LHC production and experimental detection. We delineate the interplay between the lifetime of the light mesons, the suppressed direct detection cross section of the lightest baryon, and the scale of equilibration sector that can be probed at the LHC.
Absolute neutrino mass measurements
The neutrino mass plays an important role in particle physics, astrophysics and cosmology. In recent years the detection of neutrino flavour oscillations proved that neutrinos carry mass. However, oscillation experiments are only sensitive to the mass-squared difference of the mass eigenvalues. In contrast to cosmological observations and neutrino-less double beta decay (0v2{beta}) searches, single {beta}-decay experiments provide a direct, model-independent way to determine the absolute neutrino mass by measuring the energy spectrum of decay electrons at the endpoint region with high accuracy.Currently the best kinematic upper limits on the neutrino mass of 2.2eV have been set by two experiments in Mainz and Troitsk, using tritium as beta emitter. The next generation tritium {beta}-experiment KATRIN is currently under construction in Karlsruhe/Germany by an international collaboration. KATRIN intends to improve the sensitivity by one order of magnitude to 0.2eV. The investigation of a second isotope ({sup 137}Rh) is being pursued by the international MARE collaboration using micro-calorimeters to measure the beta spectrum. The technology needed to reach 0.2eV sensitivity is still in the R and D phase. This paper reviews the present status of neutrino-mass measurements with cosmological data, 0v2{beta} decay and single {beta}-decay.
Modeling of Failure for Analysis of Triaxial Braided Carbon Fiber Composites
In the development of advanced aircraft-engine fan cases and containment systems, composite materials are beginning to be used due to their low weight and high strength. The design of these structures must include the capability of withstanding impact loads from a released fan blade. Relatively complex triaxially braided fiber architectures have been found to yield the best performance for the fan cases. To properly work with and design these structures, robust analytical tools are required that can be used in the design process. A new analytical approach models triaxially braided carbon fiber composite materials within the environment of a transient dynamic finite-element code, specifically the commercially available transient dynamic finite-element code LS-DYNA. The geometry of the braided composites is approximated by a series of parallel laminated composites. The composite is modeled by using shell finite elements. The material property data are computed by examining test data from static tests on braided composites, where optical strain measurement techniques are used to examine the local strain variations within the material. These local strain data from the braided composite tests are used along with a judicious application of composite micromechanics- based methods to compute the stiffness properties of an equivalent unidirectional laminated composite required for the shell elements. The local strain data from the braided composite tests are also applied to back out strength and failure properties of the equivalent unidirectional composite. The properties utilized are geared towards the application of a continuum damage mechanics-based composite constitutive model available within LS-DYNA. The developed model can be applied to conduct impact simulations of structures composed of triaxially braided composites. The advantage of this technology is that it facilitates the analysis of the deformation and damage response of a triaxially braided polymer matrix composite within the environment of a transient dynamic finite-element code such as LS-DYNA in a manner which accounts for the local physical mechanisms but is still computationally efficient. This methodology is tightly coupled to experimental tests on the braided composite, which ensures that the material properties have physical significance. Aerospace or automotive companies interested in using triaxially braided composites in their structures, particularly for impact or crash applications, would find the technology useful. By the development of improved design tools, the amount of very expensive impact testing that will need to be performed can be significantly reduced.
Can the standard model C P violation near the W bags explain the cosmological baryonic asymmetry?
Not Available