Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPETENCY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Evaluation of chromatographic resins for high efficacy separation of radium from chemical analogues

The separation of Radium (Ra) from interfering chemical analogues is of major importance for both the accurate measurement of Ra-226 in environmental samples and the preparation of radium targets destined for medical isotope production. The adsorption behavior of Ra, Barium (Ba), and Strontium (Sr) was investigated on multiple crown-ether-based proprietary extraction chromatographic resins developed by TrisKem Int. Among these, the TK101 resin, characterized by a novel room-temperature ionic liquid (RTIL) dual extractant–solvent system, demonstrated enhanced affinity and selectivity, particularly at low acid concentrations, achieving a D w of 3477 ± 73 for Ra in 0.04 M HNO₃, whereas the maximum Ra D w obtained with the traditional Sr resin in 8 M HNO 3 was only 12.33 ± 0.4. In 0.04 M HNO 3 , a Ra distribution ratio (D w ) of 776 was achieved within 1 min, indicating rapid uptake kinetics. The adsorption capacities were estimated at 19.6 ± 0.1 mg/g for Ba and 12.0 ± 0.2 mg/g for Sr. However, competing alkali metals significantly reduced alkaline earth metal uptake, indicating that the TK101 resin is best suited for radium purification following a preconcentration step to minimize matrix effects in high salinity samples. Dynamic column studies confirmed the strong chromatographic performance of the TK101 resin, with no significant Ba or Sr breakthrough in the Ra fraction and a Ra recovery of 87 ± 2.8%. These results demonstrate the potential of the TK101 resin for selective radium separation in analytical and radiochemical applications.

and nuclear chemistry↗

Durability challenges and perspective in the development of PGM-free electrocatalysts for the oxygen reduction reaction

Significant advancement in the development of highly active platinum group metal-free (PGM-free) electrocatalysts is giving rise to the possibility of a low-cost replacement for Pt electrocatalysts in polymer electrolyte fuel cells. However, before the successful implementation of PGM-free electrocatalysts, the challenge of long-term stability under fuel cell operating conditions needs to be addressed. In this paper, the current status of PGM-free electrocatalyst performance and durability is reviewed. A perspective on the route for the study of degradation mechanisms in PGM-free electrocatalysts in both half-cell and membrane electrode assembly environments is presented. The analysis of proposed degradation mechanisms suggests classification into two relevant length scales: atomic scale and macro/mesoscale. Finally, an overview of different characterization techniques (both experimental and theoretical) for studying different possible degradation mechanisms is outlined. Directly addressing the underlying mechanisms leading to loss of activity in PGM-free electrocatalysts will provide valuable insight necessary for the development of next-generation materials with improved durability capable of competing with Pt-based counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Partitioning behavior and mechanisms of rare earth elements during precipitation in acid mine drainage

Rare earth elements (REEs) are frequently found concentrated in acid mine drainage (AMD). The recovery of REEs from AMD has been successfully achieved using selective chemical precipitation. However, a portion of the REEs is often lost to the precipitates of the dominant metal contaminant ions. To better understand the REE partitioning behavior and mechanisms during the precipitation process, a systematic study was performed on both natural and synthetic AMD solutions. Precipitation test results show that REE removal was noticeably elevated at pH 4.0 after adding H 2 O 2 to convert ferrous to ferric ions, causing nearly complete precipitation of iron. Solution equilibrium calculations suggested that the REE removal increase was realized through adsorption onto the surfaces of the ferric precipitates. The presence of aluminum species in the solutions reduced the adsorption of REEs on the ferric precipitates. Based on electro-kinetic test results, it was concluded that aluminum species neutralize the negative surface charge of the ferric precipitates and compete with REEs for the adsorption active sites. The presence of ferrous ions in the solutions reduced REE adsorption on the aluminum precipitates at lower pH values (e.g., 5.0) due to competitive adsorption. However, at higher pH values (e.g., 6.0), REE removal to the precipitate product increased due to the precipitation of ferrous ions. Additionally, to the electro-kinetic tests and solution equilibrium calculations, mineralogy characterization, specific surface area measurement, particle size analysis, and morphology analysis were also conducted to investigate and identify the partitioning mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical simulation of the devolatilization of a moving coal particle

The devolatilization of an isolated coal particle moving relative to the surrounding gas is numerically simulated using a competing reaction model of the pyrolysis and assuming that the released volatiles burn in an infinitely thin diffusion flame around the particle or not at all. The temperature of the particle is assumed to be uniform and the effects of the heat of pyrolysis, the intraparticle mass transfer resistance, and the variation of the particle radius are neglected. The effects of the size and velocity of the particle and of the temperature and oxygen mass fraction of the gas on the particle and flame temperature histories, the devolatilization time and the yield of light and heavy volatiles are investigated. The motion of the particle may have an important effect on the shape and position of the flame of volatiles, but it has only a mild effect on the devolatilization process for the particle sizes typical of pulverized coal combustion. This effect increases for large particles or in the absence of radiation. The relative motion enhances the heat transfer between the particle and the gas, causing the devolatilization time to decrease at high gas temperatures and to increase at low gas temperatures. The numerical results are compared with a blowing-corrected Nusselt number correlation often used in heat transfer models of the process. (author)

01 COAL, LIGNITE, AND PEAT↗

Vitiated ethane oxidation in a high-pressure flow reactor

Vitiated combustion processes offer the potential to improve the thermodynamic efficiency in hydrocarbon-fueled combustion systems, providing a subsequent decrease in energy-specific CO{sub 2} emissions along with a decrease in the emission levels of nitrogen oxides (NO{sub x}) and particulate matter. The present work comprises an experimental and modeling study of vitiated ethane oxidation in a high-pressure flow reactor, with pressures of 1-6 bar, O{sub 2} mole fractions of 3.5-7.0%, temperatures of 1075-1100 K and 15-18 mole.% H{sub 2}O. Time-history measurements of species are used to characterize the overall rate of reaction and track the fuel-carbon through intermediate and product species. A one-dimensional mixing-reacting model that accounts for partial oxidation during reactant mixing is used in conjunction with a detailed kinetic mechanism. Changes in competing pathways due to variations in pressure and O{sub 2} mole fraction give rise to the complex pressure dependence seen in the experiments. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HCN oxidation in an O{sub 2}/CO{sub 2} atmosphere: An experimental and kinetic modeling study

HCN is one of the most important intermediates in NO{sub x} chemistry including formation and removal processes and the knowledge of HCN oxidation is thus very important to minimize NO{sub x} emissions. The present work aims to evaluate the oxidation behavior of HCN in an O{sub 2}/CO{sub 2} atmosphere, due to the lack of studies at these specific operating conditions and the increasing importance of the oxy-fuel combustion processes, characterized by an O{sub 2}/CO{sub 2} combustion atmosphere instead of air. With this purpose, a flow reactor experimental and kinetic modeling study of the oxidation of HCN under CO{sub 2} diluted conditions, in the 900-1450 K temperature range and for different stoichiometries, ranging from very reducing to oxidizing conditions, has been performed. The large experimental differences observed in the O{sub 2}/CO{sub 2} atmosphere in comparison to traditional air-fired combustion corroborate the importance of the HCN oxidation study in an O{sub 2}/CO{sub 2} environment. The presence of high CO{sub 2} concentration levels clearly inhibits HCN oxidation, since CO{sub 2} competes with O{sub 2} for atomic hydrogen through the CO{sub 2} + H {r_reversible} CO + OH reaction. The experimental results show the oxidation regime of HCN for different stoichiometries, analyzing the formation of the main products of the process: CO, NO, N{sub 2}, N{sub 2}O and HNCO. The higher availability of oxygen increases the HCN conversion, even though the onset temperature for reaction is almost similar at any stoichiometry studied. The mechanism used for calculations was that developed by Dagaut et al. [P. Dagaut, P. Glarborg, M.U. Alzueta, Prog. Energy Combust. Sci. 34 (2008) 1-46] for the oxidation of HCN in air combustion, updated in the present work to take into account the presence of an O{sub 2}/CO{sub 2} combustion atmosphere. In general, the modified model gives a reasonably good description of the experiments performed. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the behavior of selenium in Pulverized-Coal Combustion systems

The behavior of Se during coal combustion is different from other trace metals because of the high degree of vaporization and high vapor pressures of the oxide (SeO{sub 2}) in coal flue gas. In a coal-fired boiler, these gaseous oxides are absorbed on the fly ash surface in the convective section by a chemical reaction. The composition of the fly ash (and of the parent coal) as well as the time-temperature history in the boiler therefore influences the formation of selenium compounds on the surface of the fly ash. A model was created for interactions between selenium and fly ash post-combustion. The reaction mechanism assumed that iron reacts with selenium at temperatures above 1200 C and that calcium reacts with selenium at temperatures less than 800 C. The model also included competing reactions of SO{sub 2} with calcium and iron in the ash. Predicted selenium distributions in fly ash (concentration versus particle size) were compared against measurements from pilot-scale experiments for combustion of six coals, four bituminous and two low-rank coals. The model predicted the selenium distribution in the fly ash from the pilot-scale experiments reasonably well for six coals of different compositions. (author)

01 COAL, LIGNITE, AND PEAT↗

A general probabilistic approach for the quantitative assessment of LES combustion models

The Wasserstein metric is introduced as a probabilistic method to enable quantitative evaluations of LES combustion models. The Wasserstein metric can directly be evaluated from scatter data or statistical results through probabilistic reconstruction. The method is derived and generalized for turbulent reacting flows, and applied to validation tests involving a piloted turbulent jet flame with inhomogeneous inlets. It is shown that the Wasserstein metric is an effective validation tool that extends to multiple scalar quantities, providing an objective and quantitative evaluation of model deficiencies and boundary conditions on the simulation accuracy. Several test cases are considered, beginning with a comparison of mixture-fraction results, and the subsequent extension to reactive scalars, including temperature and species mass fractions of CO and CO2. To demonstrate the versatility of the proposed method in application to multiple datasets, the Wasserstein metric is applied to a series of different simulations that were contributed to the TNF-workshop. Analysis of the results allows to identify competing contributions to model deviations, arising from uncertainties in the boundary conditions and model deficiencies. These applications demonstrate that the Wasserstein metric constitutes an easily applicable mathematical tool that reduce multiscalar combustion data and large datasets into a scalar-valued quantitative measure.

42 ENGINEERING↗

An experimental and kinetic modeling study of cyclopentane and dimethyl ether blends

Cyclopentane is a suitable naphthene, or cycloalkane, in a palette for multi-component gasoline surrogate fuels due to its presence in market fuels and its relevance to alkyl substituted cyclopentanes also present. However, the previous oxidation studies of cyclopentane have primarily focused on neat mixtures. Blending cyclopentane with dimethyl ether in this work therefore serves to inform our understanding of, and improve predictive models for, multi-component mixtures. Here, the auto-ignition of cyclopentane/dimethyl ether blends was studied in a high-pressure shock tube and in a rapid compression machine. A wide range of temperatures (650 – 1350 K) and elevated pressures of 20 and 40 bar were studied at equivalence ratios of 0.5, 1.0 and 2.0 in air for two blending ratios (30/70 and 70/30 mole% cyclopentane/di-methyl ether mixtures). A detailed kinetic model for cyclopentane was revised to capture the measured ignition delay times and apparent heat release rates in this study. Literature ignition delay time, jet-stirred reactor, and laminar burning velocity measurements of neat cyclopentane were used as additional validation. Improvements to the kinetic model were based on recent literature studies related to sub-models including cyclopentene and cyclopentadiene which allowed the removal of previous local rate-constant optimizations. Low temperature reactivity of cyclopentane was found to be controlled by the branching ratio between concerted elimination of HO͘ 2 and the strained formation of Q&#775OOH radicals in agreement with previous studies. In this study, the low branching ratio of Q&#775OOH formation increases the influence of a competing consumption pathway for cyclopentyl-peroxy (CPTO͘ 2 J) radicals. The sensitivity of the simulated ignition delay times to the formation of cyclopentyl hydroperoxide (CPTO 2 H), from CPTO͘ 2 J and HO͘ 2 , is discussed. The current model is used to analyze the influence of dimethyl ether on the reactivity of cyclopentane in the context of previous literature studies of dimethyl ether binary blends with ethanol and toluene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing O 2 -dependence of tetrahydrofuranyl reactions via isomer-resolved speciation

Low-temperature oxidation of tetrahydrofuran involves competing reactions that depend on temperature, pressure, and oxygen concentration, including ring-opening and subsequent oxidation of initial radicals ($\dot{R}$), HOO-elimination yielding dihydrofuran isomers, and the formation of peroxy radicals ($RO\dot{O}$). Here, the latter species, upon isomerization, lead to hydroperoxy-substituted radicals ($\dot{Q}OOH$) that undergo reaction either via unimolecular decomposition or second-O 2 -addition. Quantitative measurements of partially oxidized intermediates formed from each type of reaction provide critical constraints that are required for accurate modeling of combustion. To examine the influence of temperature and oxygen concentration on intermediates from tetrahydrofuran, isomer-resolved speciation measurements were conducted at 810 Torr in a jet-stirred reactor (JSR) from 500 – 1000 K. Resulting from negative-temperature coefficient behavior, species concentrations peaked at two temperatures, 600 K and 800 K, which were then selected for separate experiments to quantify O 2 -dependence using concentrations of 0.37 • 10 18 – 7.40 • 10 18 molecules cm –3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

O 2 -Dependence of reactions of 1,2-dimethoxyethanyl and 1,2-dimethoxyethanylperoxy isomers

Reaction mechanisms of Ṙ and ROȮ radicals derived from low-temperature oxidation of 1,2-dimethoxyethane (CH 3 O(CH 2 ) 2 OCH 3 ) were investigated using speciation from multiplexed photoionization mass spectrometry (MPIMS) measurements via Cl-initiated oxidation, in conjunction with electronic structure calculations. The experiments were conducted at 5 bar, from 450 K – 650 K, and O 2 concentrations from 1 · 10 14 cm –3 – 6 · 10 18 cm –3 to probe the effects on competing reaction channels of 1,2-dimethoxyethanyl (Ṙ) and 1,2-dimethoxyethanylperoxy (ROȮ) isomers. Several species were detected with photoionization spectral fitting – ethene, formaldehyde, methyl vinyl ether, and 2-methoxyacetaldehyde – and, as determined by electronic structure calculations, may form via unimolecular decomposition of 1,2-dimethoxyethanyl or 1,2-dimethoxyethanylperoxy. O 2 -dependent yield ratios show that the formation pathways for all species undergo a competition between O 2 -addition and unimolecular decomposition. Here, adiabatic ionization energies were also calculated and utilized along with exact mass determinations to infer contributions for other species derived exclusively from first- and second-O 2 -addition, including 1,2-dimethoxyethene, cyclic ethers, and dicarbonyls.

1,2-dimethoxyethane↗

Theoretical predictive screening of noble-metal-containing M 3 AuC 2 (M = Ti, V, and Cr) MAX phases

Using first-principles density functional theory (DFT), the ground state physical properties of the newly synthesized noble-metal-containing Ti 3 AuC 2 MAX phase have been investigated. The effect of transition-element Ti replacement (V and Cr) on physical properties, including structural, elastic, electronic, thermal, and optical are presented. The optimized lattice parameters of Ti 3 AuC 2 MAX phase are in good agreement with the experimental values and decrease when we replace Ti with V and then Cr. The magnetic properties of M 3 AuC 2 are predicted by using generalized gradient approximation (GGA) incorporating onsite electron correlation parameter (Hubbard U parameter) within DFT. Out of three studied MAX phases, V 3 AuC 2 and Cr 3 AuC 2 phases exhibit magnetism. The thermodynamical stability of M 3 AuC 2 (M = Ti, V, and Cr) phases is discussed by the formation enthalpy with respect to their most competing phases. The electronic structure reveals that these phases have metallic nature and are electrically anisotropic. The M-element replacement has an effect on the bonding properties of M 3 AuC 2 . The bonding between M-C is in the order of Cr 3 AuC 2 > V 3 AuC 2 > Ti 3 AuC 2 according to their peak positions and heights of density of states in the occupied site, which is also confirmed from the charge density distribution. The elastic properties indicate that M 3 AuC 2 phases are ductile, machinable, less stiff, and better resistant to thermal shock and are elastically anisotropic. To understand the properties of M 3 AuC 2 for the extreme environment, we employed a quasi-harmonic Debye model at the pressure and temperature range of 0–50 GPa and 0–1600 K, respectively. Additionally, we evaluated thermal conductivity and melting temperature to further understand the potential of these MAX phases in coating applications at elevated temperature. In relation to optical properties, these MAX phases have a reasonable absorption coefficient in the visible as well as in the ultra-violet regions. The reflectivity of M 3 AuC 2 phases is polarization dependent and of 45 % against the visible region, which reveals its potential as coating material to minimize solar heating.

312 MAX phases↗

The effect of elastic anisotropy on the symmetry selection of irradiation-induced void superlattices in cubic metals

We report self-organized microstructures and patterns have been widely observed in non-equilibrium physical systems. In particular, irradiation in metals creates far-from-equilibrium environments, in which the competing dynamics of defect production and annihilation can lead to unique self-organized superlattice structures, e.g., void and gas bubble superlattices. From a physical point of view, the superlattice structures are dictated by the intrinsic symmetry breaking in the metals, i.e., anisotropy caused by the breaking of continuous rotational symmetry. In the literature, two distinctive anisotropies, elastic anisotropy and diffusion anisotropy of interstitials, have been proposed to be the origins of superlattice formation. However, it is still unclear which anisotropy dominates the symmetry selection of superlattice structures. In this paper, we study elastic anisotropy and its effect on the symmetry of void superlattices. By using theoretical analyses and phase field simulations, we show that elastic anisotropy in cubic metals can lead to either face-centered cubic or simple cubic superlattices depending on the Zener anisotropy ratio. The superlattices formed under this elastic anisotropy mechanism must form under the influence of spinodal decomposition, as the mechanism requires perturbations in the vacancy concentration field to develop into spatially-static concentration waves. We compare to existing work on symmetry selection in superlattices via diffusion anisotropy and to experimental observations, and we suggest that concentration wave development under the influence of elastic anisotropy is not the mechanism for symmetry selection during the formation of irradiation-induced void superlattices, but that diffusion anisotropy could be the dominant mechanism.

36 MATERIALS SCIENCE↗

A quantile-based scenario analysis approach to biomass supply chain optimization under uncertainty

Supply chain optimization for biomass-based power plants is an important research area due to greater emphasis on renewable power energy sources. Biomass supply chain design and operational planning models are often formulated and studied using deterministic mathematical models. While these models are beneficial for making decisions, their applicability to real world problems may be limited because they do not capture all the complexities in the supply chain, including uncertainties in the parameters. This study develops a statistically robust quantile-based approach for stochastic optimization under uncertainty, which builds upon scenario analysis. We apply and evaluate the performance of our approach to address the problem of analyzing competing biomass supply chains subject to stochastic demand and supply. Finally, the proposed approach was found to outperform alternative methods in terms of computational efficiency and ability to meet the stochastic problem requirements.

09 BIOMASS FUELS↗

Investigation of grid-based vorticity-velocity large eddy simulation off-body solvers for application to overset CFD

Accurately predicting unsteady wakes and vortex-dominated flows is essential to a wide range of engineering applications, including aircraft, rotorcraft, shipboard operations, bio-inspired unsteady flight and propulsion, wind turbines, and urban flows. While current CFD software can model the complete flow field and wake system, the computational costs incurred in high Reynolds number unsteady turbulent flow simulations often remain prohibitive for routine engineering use, particularly for applications involving moving components. Prior work has demonstrated that by adopting a vorticity-velocity formulation in a grid-based off-body flow solver (VorTran-M and VorTran-M2) one can lower these costs by several orders of magnitude when compared to conventional approaches. This paper describes the extensions made to VorTran-M2 to support turbulent flows, and associated benchmarking activity to assess its performance for problems involving strong stretching and diffusion processes, whose competing contributions to the vorticity field are core drivers of turbulent flow evolution. Predictions are presented for: (i) the Kida-Pelz problem whose inviscid form is of mathematical interest due to its apparent formation of singular flow in finite time; and (ii) the Taylor Green vortex arrangement, which has been extensively studied as a fundamental simulation challenge in the turbulent modeling community. Here, the results are used to evaluate the overall predictive ability and performance of two sub-grid scale models incorporated into VorTran-M2. Results indicate that the computational cost savings seen previously for inviscid and convection dominated problems extend to turbulent flow simulations supporting the viability of VorTran-M2 as a low cost means for accurately modeling the far-field and background flow, particularly when long duration vorticity evolution is of interest.

42 ENGINEERING↗

Investigation of the notch sensitivity of tailorable long fiber discontinuous prepreg composite laminates

Tailorable discontinuous fiber composite laminates provide relative formability beyond that of continuous fiber laminates, while achieving improved mechanical performance over comparable stochastic systems. Here, in this work, the notch sensitivity of engineered prepreg platelet molded composite (PPMC) laminates is investigated using the open-hole tension (OHT) test and compared to available data for stochastic PPMCs and continuous fiber laminates made with the same material. The press-formed thermoplastic composites (AS4/PEKK) were molded with a quasi-isotropic stacking sequence. The discontinuous PPMC laminate was found to be notch insensitive with OHT strengths ranging from 145.4 MPa (CV $=$ 7%) for d/w $=$ 0.5 to 229.3 MPa (CV $=$ 9%) for d/w $=$ 0.25. The highly ordered meso-structure of the engineered PPMC laminate yields comparatively excellent mechanical properties for relatively thin laminates in contrast to stochastic systems. Both net- and gross-section failures were observed for d/w $=$ 0.25, which suggests that the engineered PPMC laminates studied here maintain a degree of inherent, internal stress concentrations that compete with those caused by geometric features such as a circular hole. Computational simulations of the OHT tests with explicitly represented platelets were found to be in good agreement with experimental measurements. The progressive failure analysis was used to conduct a numerical investigation of the stacking sequence and platelet meso-morphology.

36 MATERIALS SCIENCE↗

Carbon fiber design improvements based on economic models

Circular fiber geometries are predominant in commercial carbon fiber material systems, but the use of this fiber shape has numerous limitations. Circular geometries have continuous symmetry, which is helpful for various processing considerations, but also have the largest possible maximum diffusion thickness for a given fiber area. This characteristic means that circular carbon fibers always have the highest material processing cost and lowest production throughput compared to any other fiber shape with the same area and tow count. To quantify material cost and other benefits for non-circular carbon fiber geometries, process models for polyacrylonitrile based carbon fiber production are developed in relationship to the carbon fiber shape, size, and tow count. For a given fiber shape, precursor production costs are shown to favor maximizing fiber size while conversion costs are minimized by the smallest fiber size. These competing cost trends result in a numerically optimal fiber size for a given shape and tow count, while both cost components are decreased by increasing tow count. Cost–performance tradeoffs for three lobe fiber geometries are studied by supplementing the cost trends with a numerical failure model to predict compressive strength for discrete shape variants. The shape selection is shown to be more sensitive to variations in cost than compressive strength while suboptimal shape designs can improve manufacturing robustness and achievable fiber volume fractions. Finally, an optimal three lobe carbon fiber is identified that balances the set of considerations while reducing costs and embodied energy and increasing production throughput compared to a commercial carbon fiber.

Carbon fiber↗

Kinetic isotope effects for dissociative recombination of tritiated ketenyl ion ( 3 HCCO + ): A surface-hopping ab initio molecular dynamics study

Dissociative recombination (DR) reactions are important when modeling charged species in the presence of free electrons. While experimental measurements of DR reaction rates are challenging, surface hopping ab initio molecular dynamics (SH-AIMD) simulations provide an attractive alternative. SH-AIMD is especially well-suited for estimating branching ratios, i.e., the relative rates of competing production channels, for DR reactions. Although the radiolysis of diatomic tritium has been studied experimentally, previous attempts to model these systems have failed to account for isotope effects in DR reactions. Previous SH-AIMD studies have also not investigated tritium isotope effects for the branching ratios of DR reactions. In this study, we compute the DR branching ratios of the protiated and tritiated ketenyl ion. Comparison with literature values for the protiated branching ratios provides confidence in the reliability of our SH-AIMD results. Our simulations predict a significant increase of the HC + CO branching ratio for the tritiated system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗