Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHROMATOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Effect of autohydrolysis pretreatment on biomass structure and the resulting bio-oil from a pyrolysis process

Pyrolysis is a promising method for converting biomass to biofuels. However, some of pyrolysis oil's physiochemical properties still limit its commercial applications. Here, the autohydrolysis pretreatment at 175 ± 3 °C for 40 min was conducted to improve the resulting pine pyrolysis oil’s properties as a fuel. During autohydrolysis, deacetylation and decomposition of hemicellulose was observed by ion-exchange chromatography and Fourier transform infrared spectroscopy (FT-IR). Additionally, the cleavage of lignin ether bonds was clearly determined by 13 C cross-polarization/magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR). Phosphitylation followed by 31 P NMR analysis of the heavy oils gave detailed structural information of the hydroxyl groups; the results revealed that autohydrolysis pretreatment led to a reduction of carboxyl acids in the heavy oils generated at all three pyrolysis temperatures (400, 500, and 600 °C). The 31 P NMR analysis also revealed that autohydrolysis pretreatment led to a reduction of condensed phenolic hydroxyl groups in the heavy oils produced at 600 °C. 1 H- 13 C heteronuclear single-quantum correlation (HSQC) NMR analysis showed that at a pyrolysis temperature of 600 °C, the pretreated pine produced lower methoxy group constituents. In both 31 P and HSQC NMR results indicated that autohydrolysis pretreatment increased levoglucosan yields in the bio-oils.

09 BIOMASS FUELS↗

Solvent-pore interactions in the Eagle Ford shale formation

In this work, the effect of solvent extraction on pore space was examined on a suite of samples from the Eagle Ford Shale Formation with varying lithologies and maturities. Several solvents -toluene, cyclohexane, methanol, dichloromethane, and hydrochloric acid- were contacted with shale samples, extracting the compatible organic matter. The porosity in these extracted shale samples was compared to unmodified samples. The amount and type of organic matter extracted were determined using Gas Chromatography - Mass Spectrometry, and the porosity was determined by (Ultra) Small Angle Neutron Scattering. Mostly alkanes and aromatics were detected in the extracts, but other portions of bitumen may also have been present. Only higher molecular weight alkanes were extracted with hydrochloric acid, suggesting that physical dissolution of carbonate minerals may have liberated this portion of organic matter and the solvent was not able to penetrate the bitumen and kerogen to extract the lower molecular weight alkanes. Lastly, a decrease in porosity with extraction was observed and attributed to a dominant mechanism of kerogen swelling due to kerogen-solvent interaction.

02 PETROLEUM↗

Catalytic partial oxidation reformation of diesel, gasoline, and natural gas for use in low temperature combustion engines

Onboard reforming has relevance to both conventional and advanced combustion concepts. Most recently, onboard reforming has been proposed to enable “Single-Fuel RCCI” combustion and therefore, this paper explores catalytic partial oxidation reforming of three potential transportation-relevant fuels: gasoline, diesel, and natural gas. Reformation is performed at two pressure levels (between 15 and 60 psig) for each parent fuel for equivalence ratios ranging from 3.7 to 7.6 and the gaseous reformate mixtures are characterized with gas chromatography. The percentage of diesel oxidized during reformation is similar across all of the equivalence ratios. However, the percentage of gasoline and natural gas oxidized during reformation decreased with increasing equivalence ratio. The energy released during the reformation process is also calculated and presented for each gaseous reformate fuel. The lower heating value of every reformate fuel is lower than 20% of their respective parent fuel, due to the high concentration of inert gases (mostly nitrogen) in the reformate fuel mixtures. Two reformed fuels for each parent fuel were then selected to study their autoignition characteristics using HCCI combustion on a Co-operative Fuel Research (CFR) engine. The equivalence ratio is maintained at 0.31 and the combustion phasing was held constant by varying the intake temperature. Although the equivalence ratio is constant, the input energy from the different reformate fuels is not constant due to the component concentrations in the fuel. The gaseous reformate fuels are then compared to gasoline, natural gas, and the primary reference fuels in HCCI to determine an effective Primary Reference Fuel (PRF) number or effective octane rating for each gaseous reformate fuel. The effective octane rating for the gaseous reformate fuels fell slightly above the PRF number scale at an effective octane number of ~110.

33 ADVANCED PROPULSION SYSTEMS↗

Dicarboxylic acid emissions from a GDI engine equipped with a catalytic gasoline particulate filter

Dicarboxylic acids play an important role in atmospheric chemistry, yet their emissions from primary sources, such as internal combustion engines, has not been extensively studied. In this paper, KOH impregnated quartz filters were loaded with exhaust gases from a gasoline direct injection (GDI) engine equipped with a catalytic gasoline particulate filter (GPF). All filters were analyzed for carboxylic and dicarboxylic acids using a derivatized gas chromatography-mass spectroscopy method. Exhaust gas was sampled from pre-GPF and post-GPF locations to determine the performance of the GPF regarding acid conversion. Lean and stoichiometric engine modes were considered with non-oxygenated gasoline and 10% splash blended ethanol in gasoline (E10) to examine the impact of stoichiometry and fuel type. Acid emissions represented as much as 0.51% of total unburned hydrocarbon emissions for total monocarboxylic acids and as much as 0.40% for total dicarboxylic acids. Individual acid concentrations were as high as 38 mg/kg-fuel for monocarboxylic acids and as high as 29 mg/kg-fuel for dicarboxylic acids. Overall, the study found that fuel oxygenates had mixed impact on the acid emissions. Engine-out monocarboxylic acids were reduced when using the E10 fuel by approximately 30–45% for the stoichiometric condition and increased marginally for the lean condition. Dicarboxylic acid emissions were generally insensitive to ethanol content. However, the engine condition significantly affected the acid emissions. Lean operation produced a factor of two to an order of magnitude higher emissions rates of both monocarboxylic and dicarboxylic acids than the stoichiometric condition. The catalytic GPF eliminated between 80 and 92% of the acids emitted from the engine, allowing some acids to be emitted into the environment.

42 ENGINEERING↗

One-step transformation of biomass to fuel precursors using a bi-functional combination of Pd/C and water tolerant Lewis acid

Direct one-pot transformation of lignocellulosic biomass has been developed as an effective and sustainable strategy to produce fuel blend stocks and high value chemical building blocks. In this wok, a bi-functional catalyst system consisting of palladium supported on carbon (Pd/C) and metal triflates (i.e., Sm(OTf) 3 , La(OTf) 3 , and Cu(OTf) 2 ) were shown to promote the biomass liquefaction in both hot-compressed water and supercritical ethanol medium, converting fir wood into oxygenated compounds. We report the highest bio-oil yield from hydrothermal liquefaction (HTL) was 10.47 wt% over Pd/C whereas the highest bio-oil yield of 49.71 wt% was achieved from supercritical ethanol liquefaction (SCEL) over the bi-functional catalyst system of Pd/C and La(OTf) 3 . Higher heating values, carbon recovered values and boiling point distributions were further determined for elucidating the physical properties of the bio-oils. Gas chromatography mass spectrometry (GC–MS) analysis of the bio-oils revealed the chemical composition of the bio-oils. Substituted phenols and cyclopentenone/cyclopentanone type compounds consisted of more than 60 area% of the total products from HTL, whereas phenol and esters represented the major products from SCEL. The major reaction pathways are proposed based on the GC–MS results, which include depolymerizaton, isomerization, dehydration, condensation, and hydrogenation.

09 BIOMASS FUELS↗

Use of a Lewis acid, a Brønsted acid, and their binary mixtures for the hydrothermal liquefaction of lignocellulose

The main objective of the present study is to investigate the effect of a Lewis acid, Brønsted acid, and their combined use on the hydrothermal liquefaction of lignocellulosic biomass. Hydrothermal liquefaction of teak wood was conducted at 250, 300 and 350 °C for 15, 30 and 60 min. Hydrothermal liquefaction of teak wood was carried out at 300 °C for 30 min (the best optimum conditions) without and with the use of Mg(ClO 4 ) 2 , HClO 4 , and HClO 4 /Mg(ClO 4 ) 2 at various loadings (2–10 mmol/15 g wood). The highest bio-oil yield was obtained with the non-catalytic run. All tested catalysts have negative effect on bio-oil yields. The bio-oil yields generally decreased with increasing the catalyst loadings. The deoxygenation degree in bio-oils changed depending on the type of catalyst and loading. A high degree of de-oxygenation took place with Mg(ClO 4 ) 2 catalysts. An increased catalyst loading led to decreased aromatic contents of bio-oils catalyzed by either Mg(ClO 4 ) 2 or HClO 4 . The use of a catalyst increased total naphtha fractions in bio-oils. The highest heating value of the bio-oil was estimated to be approximately 30 MJ/kg. Gas chromatography–mass spectrometry analysis revealed that the bio-oils from the non-catalytic and catalytic runs contained aldehydes, ketones, phenols, acids, esters and alcohols. Furthermore, the relative yields of the oxygenated compounds were affected by catalyst type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthetic aromatic kerosene property prediction improvements with isomer specific characterization via GCxGC and vacuum ultraviolet spectroscopy

This research explores an advanced method of fuel composition determination and builds upon typical hydrocarbon group type analyses performed with two-dimensional gas chromatography (GCxGC). In this study, structural information of individual species within Virent’s Synthetic Aromatic Kerosene (SAK) is identified by vacuum ultraviolet (VUV) spectroscopy. By mass, 71.3% of the components elute within six peaks of the chromatogram, from which 12 unique species are identified through a novel deconvolution method. Overall, the identification of 93.6%m across 26 structural isomers is made by the methods described in this work. With 93.6%m ascribed to specific isomers, the precision of fuel property predictions improves dramatically. For example, the absolute error of the viscosity prediction is reduced by 90% because of this advancement in diagnostic capability, and its 95-percentile confidence interval (precision only) is reduced by 93%. Additionally, the properties of SAK, blended with hydro processed esters fatty acids (HEFA), are demonstrated to have blended properties consistent with conventional jet fuel.

10 SYNTHETIC FUELS↗

Role of structural Fe in nontronite NAu-1 and dissolved Fe(II) in redox transformations of arsenic and antimony

Oxidation state is a major factor affecting the mobility of arsenic (As) and antimony (Sb) in soil and aquatic systems. Metal (hydr)oxides and clay minerals are effective sorbents, and may also promote redox reactions on their surfaces via direct or indirect facilitation of electron transfer. Iron substituted for Al in the octahedral sites of aluminosilicate clay minerals has the potential to be in variable oxidation states and is a key constituent of electron transfer reactions in clay minerals. This experimental work was conducted to determine whether structural Fe in clays can affect the oxidation state of As and Sb adsorbed at the clay surface. Another goal of our study was to compare the reactivity of clay structural Fe(II) with systems containing Fe(II) present in dissolved/adsorbed forms. The experimental systems included batch reactors with various concentrations of As(III), Sb(III), As(V), or Sb(V) equilibrated with oxidized (NAu-1) or partially reduced (NAu-1-Red) nontronite, hydrous aluminum oxide (HAO) and kaolinite (KGa-1b) suspensions under oxic and anoxic conditions. The reaction times ranged from 0.5 to 720 h, and pH was constrained at 5.5 (for As) and at 5.5 or 8.0 (for Sb). The oxidation state of As and Sb in the liquid phase was determined by liquid chromatography in line with an inductively coupled plasma mass spectrometer, and in the solid phase by X-ray absorption spectroscopy. Our findings show that structural Fe(II) in NAu-1-Red was not able to reduce As(V)/Sb(V) under the conditions examined, but reduction was seen when aqueous Fe(II) was present in the systems with kaolinite (KGa-1b) and nontronite (NAu-1). The ability of the structural Fe in nontronite clay NAu-1 to promote oxidation of As(III)/Sb(III) was greatly affected by its oxidation state: if all structural Fe was in the oxidized Fe(III) form, no oxidation was observed; however, when the clay was partially reduced ({approx}20% of structural Fe was reduced to Fe(II)), NAu-1-Red promoted the most extensive oxidation under both oxic and anoxic conditions. Electron balance considerations suggest that structural Fe(III) in the NAu-1-Red was the sole oxidant in the anoxic setup, while dissolved O{sub 2} also contributes in oxic conditions. Long-term batch experiments revealed the complex dynamics of As aqueous speciation in anoxic and oxic systems when reduced arsenic was initially added: rapid disappearance of As(III) was observed due to oxidation to As(V) followed by a slow increase of aqueous As(III). This behavior is explained by two reactions: fast initial oxidation of As(III) by structural Fe(III) (anoxic) or Fe(III) and dissolved O2 (oxic) followed by the slow reduction of As(V) by dissolved Fe(II). The resulting re-mobilization of As due to As(V) reduction by aqueous Fe(II) occurs on time scales on the order of days. These reactions are likely significant in a natural soil or aquifer environment with seasonal cycling or slightly reducing conditions with an abundance of clay minerals and dissolved Fe(II).

36 MATERIALS SCIENCE↗

Position-specific carbon isotopes of Murchison amino acids elucidate extraterrestrial abiotic organic synthesis networks

The Murchison meteorite is a well-studied carbonaceous chondrite with relatively high concentrations of amino acids thought to be endogenous to the meteorite, in part because they are characterized by carbon isotope (δ 13 C) values higher than those typical of terrestrial amino acids. Past studies have proposed that extraterrestrial amino acids in the Murchison meteorite could have formed by Strecker synthesis (for α-amino acids), Michael addition (for β-amino acids), or reductive amination, but a lack of constraints have prevented confident discrimination among these possibilities, or assignment of specific formation pathways to each of several specific amino acids. Position-specific carbon isotope analysis differentiates amongst these mechanisms by relating molecular sites to isotopically distinct carbon sources and by constraining isotope effects associated with elementary chemical reactions. Prior measurements of the position-specific carbon isotopic composition of α-alanine from the Murchison CM chondrite demonstrated that alanine’s high δ 13 C VPDB value is attributable to the amine carbon (δ 13 C VPDB = +142 ± 20‰), consistent with Strecker synthesis drawing on 13 C-rich carbonyl groups in precursors (Chimiak et al., 2021). Here, we measured the δ 13 C composition of fragment ions generated by electron impact ionization of derivatized α-alanine, β-alanine, and aspartic acid from Murchison via gas chromatography-Fourier transform mass spectrometry. α-Alanine’s amine carbon yielded δ 13 C VPDB = +109 ± 21‰, which is consistent with the previously measured value and with formation from 13 C-rich precursors. β-Alanine’s amine carbon presents a lower δ 13 C VPDB = +33 ± 24‰, which supports formation from 13 C-rich precursors but potentially via a Michael addition mechanism rather than Strecker synthesis. Aspartic acid’s amine carbon has δ 13 C VPDB = -14 ± 5‰, suggesting synthesis from precursors distinct from those that generated the alanine isomers. Further, these measurements indicate that Murchison amino acids are a mixture of compounds made from different synthesis mechanisms, though some subsets likely drew on the same substrates; this conclusion highlights the complexity of extraterrestrial organic synthesis networks and the potential of emerging methods of isotope ratio analysis to elucidate the details of those networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly efficient phosphorescence from cyclometallated iridium(III) compounds: Improved syntheses of picolinate complexes and quantum chemical studies of their electronic structures

In this work, we report a new method to make heteroleptic cyclometallated iridium(III) complexes that employs 1,2-dimethoxyethane (DME) instead of the commonly used 2-ethoxyethanol for the addition of ancillary ligands to chloro-bridged dimeric iridium species. Thus, picolinic acid was quickly and cleanly added to [(F 2 ppy)2Ir(Cl)]2 (where F 2 ppy=2-(4',6'-difluorophenyl)pyridinato) with base under DME reflux to afford (F 2 ppy) 2 Ir(picolinate) (FIrpic) in excellent yield. The high purity of the products obviates the need for further purification, an improvement over the common route in which column chromatography is required. We prepared eleven picolinate complexes by this route, eight of which were characterized by single crystal x-ray diffraction. The complexes possess the same distorted octahedral geometry with two bidentate phenylpyridine ligands and one bidentate 2-picolinate ligand. All of the compounds exhibited efficient phosphorescence with colors ranging from blue to orange; photophysical measurements revealed emission quantum yields as high as 0.92, while most surpassed 0.5. Time-dependent density functional theory calculations, coupled with the use of natural transition orbitals (NTOs), allowed a detailed interpretation of the electronic structures for the complexes. The nature of the acceptor orbital for the lowest-energy triplet state NTO was discovered to be an important predictor for the emission spectra of FIrpic and its congeners.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new synthetic method of [Ru(2,2′:6′,2″-terpyridine)(2,2′-bipyridine)Cl] + complexes using cis -[Ru(2,2′:6′,2″-terpyridine)(NCCH 3 ) 2 Cl] + as an intermediate and comparison to a method using [Ru(benzene)(2,2′-bipyridine)Cl] + intermediates

A new method of synthesizing [Ru(terpy)(bpy)Cl] + (terpy = 2,2′:6′,2″-terpyridine, bpy = 2,2′-bipyridine) complexes using the starting material cis-[Ru(terpy)(NCCH 3 ) 2 Cl](PF 6 ) is reported. The yields of four derivatives ([Ru(terpy)(NN)Cl](PF 6 ): NN = bpy, 1; 4,4′-(MeO) 2 bpy, 2; 4,4′-(CF 3 ) 2 bpy, 3; 2,2′-biquinoline, 4) with this method range from 58 to 94 % and are similar to or greater than a known reaction in which the starting material is [Ru(benzene)(NN)Cl](PF 6 ). However, the use of cis-[Ru(terpy)(NCCH 3 ) 2 Cl](PF 6 ) results in lower levels of homoleptic Ru byproducts in the synthesis of 1 as compared to the use of [Ru(benzene)(bpy)Cl](PF 6 ) as determined by 1 H NMR spectroscopy. In addition, a high-purity and gram-scale synthesis of cis-[Ru(terpy)(NCCH 3 ) 2 Cl](PF 6 ) that does not use column chromatography is reported, in contrast to the original synthesis disclosed in the literature.

Bipyridine↗

Panax quinquefolius (North American ginseng) cell suspension culture as a source of bioactive polysaccharides: Immunostimulatory activity and characterization of a neutral polysaccharide AGC1

In this study, we propose the use of a plant tissue culture-based system for the production of polysaccharides with consistent chemical characteristics and reduced endotoxin content. Polysaccharides were isolated from suspension cultures of Panax quinquefolius (American ginseng), a widely used medicinal herb. A neutral fraction, AGC1, purified by anion exchange and size exclusion chromatography, displayed immunostimulatory activity in vitro and ex vivo. AGC1 (average molecular weight: 5.2 kDa) was predominantly composed of galactose (>60%) along with the presence of several other neutral sugars such as arabinose, xylose, glucose, mannose and rhamnose in minor amounts. The major glycosidic linkages were found to be 3-Galp (48.5%), 3,6-Galp (10.2%), t-Galp (5.2%), 6-Galp (4.4%), 4-Glcp (5.7%), 4-Arap/5-Araf (4.0%) and t-Araf (4.5%). AGC1 significantly (p < 0.05) stimulated the expression of a range of proinflammatory mediators in RAW 264.7 murine macrophages such as IL-6, TNF-α, MCP-1 and GM-CSF. Additionally, AGC1 treatment of RAW 264.7 cells stimulated NOS2 gene expression, leading to increased levels of iNOS and downstream NO. Consistent with this, AGC1 was able to act as an immunostimulant in primary murine splenocytes, enhancing cell proliferation, as well as NO and TNF-α production. Our results also indicate the partial role of NF-κB pathway in the immunostimulatory response.

59 BASIC BIOLOGICAL SCIENCES↗

Nanolignin-based high internal phase emulsions for efficient protection of curcumin against UV degradation

As an emulsifier, lignin exhibits excellent UV resistance on drug-loaded emulsion systems for drug delivery. However, due to the structural variation and complexity of lignins from various origins, their UV shielding performance varies with the techniques for lignin extraction, which impacts properties and the protection efficiency of lignin-based HIPEs (high internal phase emulsions). In this work, lignin nanoparticles, prepared from three lignin preparations of Eucalyptus, were used in HIPEs delivery systems to protect curcumin from degradation by UV radiation. Structures of the lignin preparations were characterized using 2D HSQC (heteronuclear single-quantum coherence) NMR (nuclear magnetic resonance), 31 P NMR, and GPC (gel permeation chromatography). The residual curcumin level after 36h UV exposure in the nanolignin-based HIPEs was over 72%, much higher than that (< 10% after 24 h UV exposure) in the oil phase without lignin, indicating that the nanolignin-based HIPEs with enhanced UV shielding ability protect curcumin better. Of the three lignin preparations, AL (alkali lignin), with the lowest molecular weight, highest contents of phenolic hydroxyl and carboxyl groups, and highest S/G ratio, displayed the best anti-UV radiation ability and the most uniform nanoparticle size.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrogen from low-density polyethylene via nonthermal plasma: Effects of energy density and process parameters

Nonthermal plasma processes are promising for the modular valorization of plastic waste, especially into hydrogen and carbon materials, due to their high intensity, lack of reliance on catalysts or consumables, and suitability to be directly powered by electricity. We investigate the production of hydrogen from low-density polyethylene (LDPE) as a plastic waste model using streamer Dielectric Barrier Discharge (sDBD) plasma in nitrogen at atmospheric pressure. Here, we examine the effects of process energy density (energy input per unit of feedstock mass), feedstock mass, and plasma intensity (electric voltage) on plasma properties, hydrogen yield and energy efficiency via gas chromatography, optical emission spectroscopy, and electrical diagnostics, together with reactor-scale and nonlinear electric circuit modeling. The characteristic temperature of free electrons in the sDBD plasma is approximately 15000 K (1.3 eV), and that of gas species 10 times lower, demonstrating strong thermal non-equilibrium that can lead to molecular bond scission via charged species impact rather than direct heating. Experimental results show that higher energy density leads to greater hydrogen production and diminishing energy efficiency, and that higher plasma intensity and larger feedstock mass lead to greater hydrogen yield due to higher plasma temperatures and enhanced energy fluxes to the feedstock.

08 HYDROGEN↗

Studying the effect of drug-to-excipient ratio on drug release profile for drug coated balloons

Drug-coated balloons (DCB) have emerged as the alternative procedure for restenosis because of their ability to treat a variety of occlusion types with a uniform dose of anti-proliferative drugs. DCB are balloons coated with antiproliferative drugs encapsulated in a polymer matrix. There are several types of coating matrices used to produce DCB. In this study, the relationship between coating composition and drug release under physiologically relevant conditions was examined to understand how differences in coating composition impacts the drug transfer from the balloon surface to the simulated body fluids. To conduct the experiments, the balloons were coated with different paclitaxel (drug)-to-iopromide (excipient) ratios (3:1, 3:2 and 1:2) using an in-house developed micro-pipetting method. Scanning electron microscopy (SEM) images showed that the 3:1 PTX:IOP ratio produced a more uniform, crystalline microstructure with a thinner coating throughout the balloon surface compared to the other drug-to-excipient ratios. The 1:2 PTX:IOP ratio showed the least crystalline microstructure among the three ratios evaluated in this study. Three different drug elution conditions were tested. The amount of drug released to the medium was quantified by high performance liquid chromatography (HPLC). Our soaking study and submerge & deploy study showed that ~20% of the drug transferred to the target site under physiological conditions. A track and deploy method was performed using a “mock” artery, to simulate an in vitro environment. Coated balloons were passed through the mock artery to mimic tracking turns the balloon within the arteries during the angioplasty procedures. Seven elution samples were collected at different stages of the procedure. Finally, drug release results suggest that the higher excipient ratio helps to deliver the lipophilic drug to the target site under simulated conditions but causes higher drug loss during the balloon transfer process.

60 APPLIED LIFE SCIENCES↗

Compartmental Targeting for mTHPC-Based Photodynamic Treatment In Vivo: Correlation of Efficiency, Pharmacokinetics, and Regional Distribution of Apoptosis

Purpose: The present study investigates the efficacy of compartmental targeting in xenografted tumors treated by meta-tetra(hydroxyphenyl)chlorin (mTHPC)-mediated photodynamic therapy (PDT). The therapeutic efficacy was, furthermore, related to a regional photoinduced distribution of apoptosis and an mTHPC biodistribution profile. Methods and Materials: Mice bearing EMT6 tumors were subjected to a single irradiation (10 J/cm{sup 2}) of red laser light (652 nm) at different intervals after a single- (0.3 mg/kg or 0.15 mg/kg) or double-intravenous (2 x 0.15 mg/kg) injection(s) of mTHPC. Efficiency of the treatment was evaluated by monitoring tumor regrowth. mTHPC pharmacokinetics were assessed by high-performance liquid chromatography analysis of excised organs. The regional distribution of apoptosis in tumor sections was investigated with a newly developed colabelling immunohistochemistry technique. Results: A fractionated double-injection protocol of mTHPC with 24-h and 3-h drug-light intervals (DLI) yielded 100% tumor cure, with tumors presenting a massive apoptosis of neoplastic cells along with a distortion of vessels. The best efficiency for a single injection (0.3 mg/kg) was about 54% tumor cure and corresponded to a DLI of 3 h. At this DLI, tumors showed apoptosis of endothelial cells in residual vessels. Concentrations of mTHPC observed in plasma and tumor for the fractionated injection were not statistically different and were less than the total drug dose in each compartment. Conclusions: The present work suggests that clinical PDT protocols with mTHPC could be greatly improved by fractionation of the drug administration. Time points should be chosen based on the intratumoral spatiotemporal drug distribution.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

External Beam Radiation Therapy and Abiraterone in Men With Localized Prostate Cancer: Safety and Effect on Tissue Androgens

Purpose: Optimizing androgen suppression may provide better control of localized prostate cancer (PCa). Numerous trials have supported the benefit of combining androgen deprivation therapy with definitive radiation therapy in men with locally advanced or high-grade disease. Addition of abiraterone to luteinizing hormone-releasing hormone agonist (LHRHa) with radiation has not been reported. We examined the safety of this combination as well as its impact on androgen suppression. Methods and Materials: A prospective, phase 2 study was conducted in men with localized PCa treated with 6 months of neoadjuvant and concurrent abiraterone with LHRHa and radiation. Duration of adjuvant LHRHa was at the discretion of the treating clinician. Prostate biopsy assays were obtained prior to the start of therapy and prior to radiation. Sera and tissue androgen levels were measured by liquid chromatography-tandem mass spectrometry. Results: A total of 22 men with intermediate- (n=3) and high-risk PCa (n=19) received study therapy. Sixteen men completed the intended course of abiraterone, and 19 men completed planned radiation to 77.4 to 81 Gy. Radiation to pelvic nodes was administered in 20 men. The following grade 3 toxicities were reported: lymphopenia (14 patients), fatigue (1 patient), transaminitis (2 patients), hypertension (2 patients), and hypokalemia (1 patient). There were no grade 4 toxicities. All 21 men who complied with at least 3 months of abiraterone therapy had a preradiation prostate-specific antigen (PSA) concentration nadir of <0.3 ng/mL. Median levels of tissue androgen downstream of CYP17A were significantly suppressed after treatment with abiraterone, and upstream steroids were increased. At median follow-up of 21 months (range: 3-37 months), only 1 patient (who had discontinued abiraterone at 3 months) had biochemical relapse. Conclusions: Addition of abiraterone to LHRHa with radiation is safe and achieves effective prostatic androgen suppression. Preliminary analysis of the clinical data is also promising, with excellent PSA nadir and no relapse to date in this high-risk population.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Serum Proteome Signature of Radiation Response: Upregulation of Inflammation-Related Factors and Downregulation of Apolipoproteins and Coagulation Factors in Cancer Patients Treated With Radiation Therapy—A Pilot Study

Purpose: Ionizing radiation affects the proteome of irradiated cells and tissue, yet data concerning changes induced during radiation therapy (RT) in human blood are fragmentary and inconclusive. We aimed to identify features of serum proteome and associated processes involved in response to partial body irradiation during cancer treatment. Methods and Materials: Twenty patients with head and neck squamous cell cancer (HNSCC) and 20 patients with prostate cancer received definitive intensity modulated RT. Blood samples were collected before RT, just after RT, and 1 month after the end of RT. Complete serum proteome was analyzed in individual samples, using a shotgun liquid chromatography-tandem mass spectrometry approach which allowed identification of approximately 450 proteins. Approximately 100 unique proteins were quantified in all samples after exclusion of immunoglobulins, and statistical significance of differences among consecutive samples was assessed. Processes associated with quantified proteins and their functional interactions were predicted using gene ontology tools. Results: RT-induced changes were marked in the HNSCC patient group: 22 upregulated and 33 downregulated proteins were detected in post-RT sera. Most of the changes reversed during follow-up, yet levels of some proteins remained affected 1 month after the end of RT. RT-upregulated proteins were associated with acute phase, inflammatory response, and complement activation. RT-downregulated proteins were associated with transport and metabolism of lipids (plasma apolipoproteins) and blood coagulation. RT-induced changes were much weaker in prostate cancer patients, which corresponded to differences in acute radiation toxicity observed in both groups. Nevertheless, general patterns of RT-induced sera proteome changes were similar in both of the groups of cancer patients. Conclusions: In this pilot study, we proposed to identify a molecular signature of radiation response, based on specific features of serum proteome. The signature included upregulation of factors involved in acute or inflammatory response but also downregulation of plasma apolipoproteins and factors involved in blood coagulation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗