Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BEAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Advances in global optimization of high brightness beams

High brightness electron beams play an important role in accelerator-based applications such as driving X-ray free electron laser (FEL) radiation.Here in this paper, we report on advances in global beam dynamics optimization of an accelerator design using start-to-end simulations and a new parallel multi-objective differential evolution optimization method. The global optimization results in significant improvement of the final electron beam brightness.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Electron beam treatment for the removal of 1,4-dioxane in water and wastewater

Electron beam (e-beam) treatment uses accelerated electrons to form oxidizing and reducing radicals when applied to water without the use of external chemicals. In this study, electron beam treatment was used to degrade 1,4-dioxane in several water matrices. Removal improved in the progressively cleaner water matrices and removals as high as 94% to 99% were observed at a dose of 2.3 kGy in secondary effluent. 1,4-dioxane removal was confirmed to be primarily through hydroxyl radical oxidation. The calculated electrical energy per order was found to be 0.53, 0.26, and 0.08 kWh/m 3 /order for secondary effluent (Avg. total organic carbon (TOC) 9.25 mg/L), granular activated carbon effluent (TOC 3.46 mg/L), and ultrapure water, respectively, with a 70% generation and transfer efficiency applied.

1,4-dioxane↗
DOE OSTI2021

Effect of Electron Beam Oscillation Figures on Weld Surface Condition and Cross Sectional Morphology [Slides]

Overview - Problem: Preliminary experiments showed weld depth and surface condition are not consistent among different oscillation figures. Investigation: 1. Study the circle and concentric circle figures, and directional variants of these; 2. Measure the effect of frequency on the figure; 3. Produce beam figures of equal diameter; 4. Produce welds using equal diameter beam figures 5. Correlate weld depth, surface condition, and root defects with the beam figure.

42 ENGINEERING↗
DOE OSTI2022

Fast ignition inertial fusion energy using laser-driven ion beams

Ion fast ignition (IFI), or fusion fast ignition initiated by a laser-driven ion beam, is a promising path to high-gain inertial fusion energy (IFE). In IFI, cold, dense deuterium-tritium (DT) fuel is first assembled using lasers or pulsed power drivers. Then, a high-power ion beam is focused onto a small volume within the fuel (the hot spot), heating the fuel rapidly to conditions where fusion ignition takes place. Fusion burn in this hot spot propagates to the fuel surrounding the hot spot, leading to burnup of a significant fraction of this fuel and the possibility of high gain (G~100), as needed for inertial fusion energy. IFI uses separate drivers for the two basic elements, fuel compression and ignition, allowing maximum control and optimization of each. On the other hand, conventional laser fusion uses multiple beams of the same driver to compress the fuel and shock-heat its very center to ignite a burn wave. Despite impressive progress in conventional laser fusion, the precise spatial symmetry, temporal pulse shaping and timing required for high gain and IFE remain a serious unmet challenge.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

FAST Low-Energy Beamline Studies: Toward High-Peak 5D Brightness Beams for FAST-GREENS

The FAST beamline is the injector for the planned Gamma-Ray Electron ENhanced Source (GREENS) program, which aims to achieve the demonstration and first application of a high-efficiency, high-average-power free-electron laser at 515 nm. FAST-GREENS requires high 5D peak brightness; transverse normalized projected emittances of 3 mm-mrad and a peak current of 600 A are the minimum beam requirements for the FEL to reach the 10% efficiency goal. In this work, studies of the low-energy section of the FAST beamline are presented toward these ends, including preliminary measurements of beam compression and beam emittance. An effort toward developing a high-fidelity simulation model that could be later optimized for FAST-GREENS is presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Multi-Beam-Energy Control Unit Based on Triple-Bend Achromats

X-ray free electron lasers (XFELs) are the new generation of particle accelerator-based light sources, capable of producing tunable, high-power X-ray pulses that are increasingly vital across various scientific disciplines. Recently, continuous-wave (CW) XFELs driven by superconducting linear accelerators have garnered significant attention due to their ability to enhance availability by supporting multiple undulator lines simultaneously. In this paper, we introduce a novel delay system comprising four triple-bend achromats (TBAs). This delay system was combined with fast kickers and can be employed to generate electron beams on a bunch-to-bunch basis in a CW-XFEL facility. Based on the parameters of the Shanghai High-Repetition-Rate XFEL and Extreme Light Facility, start-to-end simulations demonstrate that the TBA-based delay system achieves excellent electron beam qualities while providing a wide beam-energy-tuning range from 1.39 to 8 GeV.

43 PARTICLE ACCELERATORS↗
NASA NTRS1996

Numerical Simulations of Virtual Anodes in Ion Beams Emissions in Space

Standard theories have shown that when the current density in a one-dimensional electron or ion beam exceeds a critical value, a potential hump will show up. This hump will behave as a virtual electrode to the beam particles. Measurements have demonstrated the existence of virtual cathodes and anodes. Results are presented of particle-in-cell simulations of ion beam emissions in space.

Ion Beam Plasma Ionization Particles↗
NASA NTRS2007

Efficient Generation of Truncated Bessel Beams using Cylindrical Waveguides

In this paper we address efficient conversion between a Gaussian beam (a truncated plane wave) and a truncated Bessel beam of agiven order, using cylindrical optical waveguides and whispering gallery mode resonators. Utilizing a generator based on waveguides combined with whispering gallery mode resonators, we have realized Bessel beams of the order of 200 with a conversion efficiency exceeding 10 %.

laser beam shaping↗
NASA NTRS2017

Critical Fluctuations in Beam-Plasma Systems and Solar Type III Radio Bursts

It is shown that the Langmuir waves are excited similar to critical fluctuations during phase transitions when the negative absorption due to electron beam traveling radially outward in the solar atmosphere is balanced by the positive absorption due to collisions in the corona and due to scattering on electron density inhomogeneities in the interplanetary medium. The effective temperature of the Langmuir fluctuations range from 1011 to 1013 K, explaining the majority of the type III bursts. The Rayleigh scattering and direct coupling due to density gradient as well as due to density inhomogeneities are discussed in the context of fundamental radiation and the combination scattering for second harmonic. The number density of electrons in type III beams is estimated and compared with observations. It is also shown that the stabilization of type III beams is achieved automatically since the instability does not develop in the case of critical fluctuations.

Fluctuations↗
NASA NTRSDate not supplied

Improved Plate and Beam Models for Thermoviscoelastic Constitutive Modeling of Composites

The effective properties of composites are influenced by the time-dependent behavior of polymer matrices very sensitive to changes in temperature. Improved plate and beam models are required to efficiently design, and simulate composite structures when the long-term performance of large anisotropic composite structures is the matter of interest. In this work, mechanics of structure genome (MSG) is used to con-struct linear thermoviscoelastic plate and beam models that can homogenize three-dimensional heterogeneous materials made of constituents with time- and temperature-dependent behavior. The formulation derives the transient strain energy based on integral formulation for thermorheologically simple materials subject to finite temperature changes with the restriction that the strain is small. The reduced time parameter is introduced to relate the time-temperature dependency of the anisotropic material by means of master curves at reference conditions. The new formulation has been implemented in SwiftCompTM, a general-purpose multiscale constitutive modeling code based on MSG. Experimental data and three-dimensional direct numerical simulations of thin-ply high-strain composites (TP-HSC) using a commercial finite element analysis (FEA) package are conducted to verify the accuracy of SwiftCompTM results. The paper also analyzes the relationship between the shift factor of the polymer matrix and the temperature dependencies of the effective beam properties.

Finite element analysis↗
NASA NTRSDate not supplied

Continuous Spacecraft Communications via Make-Before-Break Antenna Array Beam Steering

Active phased array (APA) antennas can electronically form multiple beams to track several targets simultaneously. Spacecraft equipped with these antennas can achieve continuous communications through a constellation of relay satellites by forming a second beam to an upcoming relay satellite before the spacecraft moves beyond the current relay’s line of sight. These make-before-break operations have utility for streaming critical data without gaps. Using characterization data from a commercially-available APA-based satellite communications terminal, we simulate performance from low-Earth orbit to a representative geosynchronous relay satellite system at Ka-band. Average data rates of 3 Mbps are achievable with a minimum rate of 0.8 Mbps during worst-case handovers. We prototype the beam-splitting algorithm in the terminal hardware and evaluate its performance in an antenna range. In an over-the-air test emulating a handover between two relays we observe error-free data in the combined telemetry stream.

active phased array antennas↗
DOE OSTI2022

U.S. advanced and novel accelerator beam test facilities

Demonstrating the viability of Advanced Accelerator Concepts (AAC) relies on experimental validation. Over the last three decades, the U.S. has maintained a portfolio of advanced and novel accelerator test facilities to support research critical to AAC. The facilities have enabled pioneering developments in a wide variety of beam and accelerator physics, including plasma-wakefield and structure-wakefield acceleration. This work provides an overview of the current portfolio of U.S. facilities possessing charged particle drive beams with high energies, on the order of tens of joules per pulse, or drive lasers with high peak powers, on the order of a petawatt, and are actively conducting AAC research.

43 PARTICLE ACCELERATORS↗
NASA NTRS1948

Shear Lag in a Plywood Sheet-stringer Combination Used for the Chord Member of a Box Beam

Theoretical and experimental investigations were made of the distribution of strains in a plywood sheet-stringer combination used as the chord member of a box beam acted upon by bending loads. The theoretical solution was obtained with the help of the principle of minimum potential energy and certain simplifying assumptions. Strain measurements were made on a build-up box beam by means of electrical-resistance strain gages connected with strain indicators. A very satisfactory agreement between the theoretical and experimental strains was obtained.

LOADS - BEAMS, BOX↗
DOE OSTI2022

Conversion of Classical Light Emission from a Nanoparticle‐Strained WSe 2 Monolayer into Quantum Light Emission via Electron Beam Irradiation

Abstract Solid‐state single photon emitters (SPEs) within atomically thin transition metal dichalcogenides (TMDs) have recently attracted interest as scalable quantum light sources for quantum photonic technologies. Among TMDs, WSe 2 monolayers (MLs) are promising for the deterministic fabrication and engineering of SPEs using local strain fields. The ability to reliably produce isolatable SPEs in WSe 2 is currently impeded by the presence of numerous spectrally overlapping states that occur at strained locations. Here nanoparticle (NP) arrays with precisely defined positions and sizes are employed to deterministically create strain fields in WSe 2 MLs, thus enabling the systematic investigation and control of SPE formation. Using this platform, electron beam irradiation at NP‐strained locations transforms spectrally overlapped sub‐bandgap emission states into isolatable, anti‐bunched quantum emitters. The dependence of the emission spectra of WSe 2 MLs as a function of strain magnitude and exposure time to electron beam irradiation is quantified and provides insight into the mechanism for SPE production. Excitons selectively funnel through strongly coupled sub‐bandgap states introduced by electron beam irradiation, which suppresses spectrally overlapping emission pathways and leads to measurable anti‐bunched behavior. The findings provide a strategy to generate isolatable SPEs in 2D materials with a well‐defined energy range.

2D material↗
DOE OSTI2024

InAs Terahertz Metalens Emitter for Focused Terahertz Beam Generation

Metasurfaces have opened doors to combining multiple photonic functionalities in a single compact device. In particular, the ability to generate short terahertz (THz) pulses with precise wavefront engineering in a single THz metasurface redefined the role metasurfaces can play in THz systems. Here, an InAs metalens emitter which generates and focuses a THz pulse beam is demonstrated using a 130 nm thick InAs metasurface designed as a binary‐phase Fresnel zone plate. The THz beam is focused to a spot of ≈430 μm at 1 THz with a short focal length of 5 mm and large numerical aperture of 0.5. Nanoscale InAs Mie resonators comprising the metasurface enable THz generation with an amplitude as high as 20 times compared to plasmonic THz emitters and several times compared to a 1 mm thick ZnTe crystal. This InAs metasurface emitter provides a new paradigm for designing THz imaging, spectroscopy, and communication systems, where THz beam generation and shaping are performed with a single device without compromising the generation efficiency, while eliminating losses and avoiding limitations of phase matching of conventional nonlinear optics approaches.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Design and characterization of a W‐band wide‐beam horn for radio holography

Abstract A W‐band wide‐beam horn suitable for prime‐focus feed is described in this paper. It was designed to provide better illuminations for outer panels of larger reflector antennas and to improve performance of radio holography systems. Much effort has been spent on precise characterization of the amplitude and phase patterns of the wide beam horn which has a direct impact on the measurement accuracy of the radio holography. A far‐field measurement setup with the correction of phase errors due to cable flexing has been developed. Good beam pattern agreement has been achieved between simulation and measurement.

Zhang, Xiaoling↗
DOE OSTI2024

Molecular beam scattering from flat jets of liquid dodecane and water

Abstract Molecular beam experiments in which gas molecules are scattered from liquids provide detailed, microscopic perspectives on the gas–liquid interface. Extending these methods to volatile liquids while maintaining the ability to measure product energy and angular distributions presents a significant challenge. The incorporation of flat liquid jets into molecular beam scattering experiments in our laboratory has allowed us to demonstrate their utility in uncovering dynamics in this complex chemical environment. Here, we summarize recent work on the evaporation and scattering of Ne, CD 4 , ND 3 , and D 2 O from a dodecane flat liquid jet and present first results on the evaporation and scattering of Ar from a cold salty water jet. In the evaporation experiments, Maxwell–Boltzmann flux distributions with a cos θ angular distribution are observed. Scattering experiments reveal both impulsive scattering (IS) and trapping followed by thermal desorption (TD). Super‐specular scattering is observed for all four species scattered from dodecane and is attributed to anisotropic momentum transfer to the liquid surface. In the IS channel, rotational excitation of the polyatomic scatterers is a significant energy sink, and these species accommodate more readily on the dodecane surface compared to Ne. Our preliminary results on cold salty water jets suggest that Ar atoms undergo some vapor‐phase collisions when evaporating from the liquid surface. Initial scattering experiments characterize the mechanisms of Ar interacting with an aqueous jet, allowing for comparison to dodecane systems. Key Points Molecular beam scattering from flat liquid jets is a powerful technique to elucidate mechanistic detail at the gas–liquid interface. Previous dodecane scattering experiments have uncovered angularly‐resolved thermal desorption fractions and energy transfer at the interface for several small molecule scatterers. Preliminary results on scattering from cold salty water reveal mechanisms of interaction between argon and an aqueous jet.

Yang, Walt↗