Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACOUSTIC TESTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Studies of Inviscid Flux Schemes for Acoustics and Turbulence Problems

Five different central difference schemes, based on a conservative differencing form of the Kennedy and Gruber skew-symmetric scheme, were compared with six different upwind schemes based on primitive variable reconstruction and the Roe flux. These eleven schemes were tested on a one-dimensional acoustic standing wave problem, the Taylor-Green vortex problem and a turbulent channel flow problem. The central schemes were generally very accurate and stable, provided the grid stretching rate was kept below 10%. As near-DNS grid resolutions, the results were comparable to reference DNS calculations. At coarser grid resolutions, the need for an LES SGS model became apparent. There was a noticeable improvement moving from CD-2 to CD-4, and higher-order schemes appear to yield clear benefits on coarser grids. The UB-7 and CU-5 upwind schemes also performed very well at near-DNS grid resolutions. The UB-5 upwind scheme does not do as well, but does appear to be suitable for well-resolved DNS. The UF-2 and UB-3 upwind schemes, which have significant dissipation over a wide spectral range, appear to be poorly suited for DNS or LES.

Morris, Chris↗

PC programs for the prediction of the linear stability behavior of liquid propellant propulsion systems and application to current MSFC rocket engine test programs, volume 1

Research on propulsion stability (chugging and acoustic modes), and propellant valve control was investigated. As part of the activation of the new liquid propulsion test facilities, it is necessary to analyze total propulsion system stability. To accomplish this, several codes were built to run on desktop 386 machines. These codes enable one to analyze the stability question associated with the propellant feed systems. In addition, further work was adapted to this computing environment and furnished along with other codes. This latter inclusion furnishes those interested in high frequency oscillatory combustion behavior (that does not couple to the feed system) a set of codes for study of proposed liquid rocket engines.

Doane, George B., III↗

Acoustic Characterization of the NASA Langley 14- by 22-Foot Subsonic Tunnel using a Phased Array

A characterization test was conducted in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel to assess recent acoustic modifications in the facility. Test section reflectivity, background noise and shear layer effects were evaluated by taking measurements of known noise sources. Both conventional speakers and a high-pressure air source were employed as noise generation mechanisms. These were mounted to a pole or fairing at a consistent location in the test section. The source waveforms were used to represent the expected frequency content of scaled Urban Air Mobility vehicles. Acoustic measurements were taken using two unique microphone arrays placed outside the core flow, one of which was a 54-element streamwise-traversing phased array. The other was an 11-element linear tower array. The applicability of phased array acoustic beamforming techniques to mitigate shear layer effects and reject background noise is presented. Additionally, beamforming results are compared to results from single-microphone processing techniques. Flow speeds investigated ranged from Mach 0.00 (static) to Mach 0.12. The tunnel has been partially acoustically treated but still exhibits flow noise, reducing the signal-to-noise ratio of the source under investigation. Conventional beamforming was able to capture high frequency content passing through the shear layer better than single microphone measurements. CLEAN deconvolution improves source mapping at low frequencies.

phased array↗

The detection of fatigue cracks by nondestructive testing methods

X-radiographic penetrant, ultrasonic, eddy current, holographic, and acoustic emission techniques were optimized and applied to the evaluation of 2219-T87 aluminum alloy test specimens. One hundred eighteen specimens containing a total of 328 fatigue cracks were evaluated. The cracks ranged in length from 0.500 inch (1.27 cm) to 0.007 inch (0.018 cm) and in depth from 0.178 inch (0.451 cm) and 0.001 inch (0.003 cm). Specimen thicknesses were nominally 0.060 inch (0.152 cm) and 0.210 inch (0.532 cm) and surface finishes were nominally 32 and 125 rms and 64 and 200 rms respectively. Specimens were evaluated in the as-milled surface condition, in the chemically milled surface condition and, after proof loading, in a randomized inspection sequence. Results of the nondestructive test (NDT) evaluations were compared with actual crack size obtained by measurement of the fractured specimens. Inspection data was then analyzed to provide a statistical basis for determinating the threshold crack detection sensitivity (the largest crack size that would be missed) for each of the inspection techniques at a 95% probability and 95% confidence level.

Rummel, W. D.↗

Medium-Sized Helicopter Noise Abatement Flight Test Data Report

Helicopter noise has consistently hindered operations within urban areas and surrounding communities. To combat this, an extensive flight test campaign, described herein, was conducted to gather acoustic data to support helicopter noise research (e.g., physics-based modeling, operational planning, etc.). Acoustic measurements were collected from four helicopters in the medium-sized weight class with maximum takeoff gross weights between 7,400 and 14,200 lb: a Bell 205 “Huey”, a Sikorsky S-76D, a Leonardo AW139, and a US Coast Guard MH-65 Dolphin (a variant of the commercial Airbus AS365 Dauphin). Each aircraft per- formed a subset of level flyovers, steady descents, turns with various initial conditions, and noise abatement approaches. A distributed ground microphone array spanning approximately 2,000 by 4,000 ft collected measurements of each flyover event. Additionally, a dedicated semicircular microphone array was used for gathering acoustic measurements of static conditions (e.g., hover). This report provides an overview of the flight test methodology, conditions tested, equipment used, and details of the accompanying distribution dataset. Figures of sample results generated for each test point are included to enable comparison and selection of the data at the discretion of the user. Specifically, source noise hemispheres of the steady flight conditions illustrate directivity of over- all levels. Noise contours over the array provide insight into the ground levels associated with approaches and turning events. These data figures are derived from the original acoustic pressure-time histories and vehicle tracking data that are provided in the distribution dataset.

Rotorcraft↗

Hertzian Ring Crack Initiation in Hot-Pressed Silicon Carbide

The use of Hertzian indentation to measure ring crack initiation force (RCIF) distributions in four hot-pressed silicon carbide (SiC) ceramics is described. Three diamond indenter diameters were used with each SiC; the RCIF in each test was identified with the aid of an acoustic emission system; and two-parameter Weibull RCIF distributions were determined for all 12 combinations. RCIF testing was found to be an effective discriminator of contact damage initiation and response. It consistently produced the same ranking of RCIF between the four SiCs, with all three different indenter diameters, which is noteworthy because Knoop hardness and fracture toughness measurements were only subtly different or equivalent for the four SiCs. However, because RCIF, like hardness, is a characteristic response of a target material to an applied indentation condition (e.g., a function of indenter diameter) and not a material property, the implications and possible limitations should be acknowledged when using RCIF to discriminate the target material response.

36 MATERIALS SCIENCE↗

Effects of grazing flow on the steady-state flow resistance and acoustic impedance of thin porous-faced liners

The results of an investigation of the effects of grazing flow on the steady-state flow resistance and acoustic impedance of seven Feltmetal and three Rigimesh thin porous-faced liners are presented. The acoustic impedance was measured using the two-microphone method. The principal findings of the study are (1) the effects of grazing flow were measured and found to be negligible, (2) negligible differences were measured between steady-state and acoustic resistance, (3) a semi-empirical model was derived that correlated both the steady-state resistance data and the acoustic impedance data of the seven Feltmetal liners. These findings suggest that nongrazing flow steady-state flow resistance tests could provide considerable insight into the acoustic behavior of porous liners in a grazing flow environment.

Hersh, A. D.↗

An analysis of sound absorbing linings for the interior of the NASA Ames 80 x 120-foot wind tunnel

It is desirable to achieve low frequency sound absorption in the tests section of the NASA Ames 80X120-ft wind tunnel. However, it is difficult to obtain information regarding sound absorption characteristics of potential treatments because of the restrictions placed on the dimensions of the test chambers. In the present case measurements were made in a large enclosure for aircraft ground run-up tests. The normal impedance of the acoustic treatment was measured using two microphones located close to the surface of the treatment. The data showed reasonably good agreement with analytical methods which were then used to design treatments for the wind tunnel test section. A sound-absorbing lining is proposed for the 80X120-ft wind tunnel.

Wilby, J. F.↗

Rotating rake design for unique measurement of fan-generated spinning acoustic modes

In light of the current emphasis on noise reduction in subsonic aircraft design, NASA has been actively studying the source of and propagation of noise generated by subsonic fan engines. NASA/LeRC has developed and tested a unique method of accurately measuring these spinning acoustic modes generated by an experimental fan. This mode measuring method is based on the use of a rotating microphone rake. Testing was conducted in the 9 x 15 Low-speed Wind Tunnel. The rotating rake was tested with the Advanced Ducted Propeller (ADP) model. This memorandum discusses the design and performance of the motor/drive system for the fan-synchronized rotating acoustic rake. This novel motor/drive design approach is now being adapted for additional acoustic mode studies in new test rigs as baseline data for the future design of active noise control for subsonic fan engines. Included in this memorandum are the research requirements, motor/drive specifications, test performance results, and a description of the controls and software involved.

Konno, Kevin E.↗

Geophysical Monitoring with Seismic Metamaterial Contrast Agents

Acoustic impedance tube and forced-oscillation seismic core test measurements were conducted to examine the low-frequency properties of acoustic metamaterial contrast agents. Water-stable suspensions of metal-organic framework (MOF) nanoparticles increased sound transmission loss (100-1250 Hz) and seismic attenuation (10-70 Hz), and reduced Young’s modulus of nanofluid-saturated Berea Sandstone cores. Preliminary measurements were used to parameterize a seismic wave velocity model. These results indicate that injectable MOF nanofluid contrast agents have potential to enhance seismic delineation of subsurface fluids and structures.

Miller, Quin RS↗

A potential means of using acoustic emission for crack detection under cyclic-load conditions

A preliminary investigation was conducted to assess the feasibility of monitoring acoustic emission signals from fatigue cracks during cyclic bend tests. Plate specimens of 6A1-4V titanium, 2219-T87 aluminum, and 18-Ni maraging steel were tested with and without crack starter notches. It was found that significant acoustic emission signals could be detected in the frequency range from 100 kHz to 400 kHz. Cracks emanating from starter notches were monitored by the ultrasonic pulse-echo technique and periodically measured by micro-optical examination. Methods used to reduce the effects of extraneous noises (i.e., machine noises, fretting) are described. A frequency spectrum analyzer was used to characterize the emissions and to evaluate methods used to acquire the signals (i.e., transducer location, bandwidth selection). The investigation indicated that it was possible to extract meaningful acoustic emission signals in a cyclic bend machine environment.

Vary, A.↗

A potential means of using acoustic emission for crack detection under cyclic-load conditions.

A preliminary investigation was conducted to assess the feasibility of monitoring acoustic emission signals from fatigue cracks during cyclic bend tests. Plate specimens of 6Al-4V titanium, 2219-T87 aluminum, and 18-Ni maraging steel were tested with and without crack starter notches. It was found that significant acoustic emission signals could be detected in the frequency range from 100 to 400 kHz. Cracks emanating from starter notches were monitored by the ultrasonic pulse-echo technique and periodically measured by micro-optical examination. The investigation indicated that it was possible to extract meaningful acoustic emission signals in a cyclic bend machine environment.

Vary, A.↗

Acoustic-loads research for powered-lift configurations

Data presented from large-scale model tests with jet engines having thrusts of 9 kN (2000 lb) and 36 kN (8000 lb) include acoustic loads for an externally blown wing and flap induced by a TF34 jet engine, an upper surface blown (USB) aircraft model in a wind tunnel, and two USB models in static tests. Comparisons of these results with results from acoustic loads studies on configurations of other sizes are made and the implications of these results on interior noise and acoustic fatigue are discussed.

Schoenster, J. A.↗

Analysis of Particle Image Velocimetry (PIV) Data for Acoustic Velocity Measurements

Acoustic velocity measurements were taken using Particle Image Velocimetry (PIV) in a Normal Incidence Tube configuration at various frequency, phase, and amplitude levels. This report presents the results of the PIV analysis and data reduction portions of the test and details the processing that was done. Estimates of lower measurement sensitivity levels were determined based on PIV image quality, correlation, and noise level parameters used in the test. Comparison of measurements with linear acoustic theory are presented. The onset of nonlinear, harmonic frequency acoustic levels were also studied for various decibel and frequency levels ranging from 90 to 132 dB and 500 to 3000 Hz, respectively.

Blackshire, James L.↗

Acoustic detection of air shower cores

At an altitude of 1890m, a pre-test with an Air shower (AS) core selector and a small acoustic array set up in an anechoic pool with a volume of 20x7x7 cu m was performed, beginning in Aug. 1984. In analyzing the waveforms recorded during the effective working time of 186 hrs, three acoustic signals which cannot be explained as from any source other than AS cores were obtained, and an estimation of related parameters was made.

Gao, X.↗

Inflow Characterization for Marine and Hydrokinetic Energy Devices. FY-2011: Annual Progress Report

The Pacific Northwest National Laboratory (PNNL), in collaboration with the Applied Physics Laboratory at the University of Washington (APL-UW), has carried out a detailed preliminary fluid flow field study at site selected for testing of marine and hydrokinetic turbines using Acoustic Doppler Velocimetry (ADV) measurements, Acoustic Doppler Current Profiler (ADCP) measurements, and Conductivity, Temperature and Depth (CTD) measurements. In FY-2011 these measurements were performed continuously for two weeks, in order to collect data during neap and spring tides, as well as during diurnal tidal variations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Swift Wind Turbine Testing

The purpose of this project was to independently test the Swift wind turbine according to the AWEA Small Wind Turbine Performance and Safety Standard. This project was part of the U.S. Department of Energy’s (DOE’s) Independent Testing project. The project was established to help providers of small wind turbines the opportunity to validate the product to AWEA standards. The National Wind Technology Center (NWTC) conducted testing that included duration, safety and function, power performance, and acoustic. Successful operation of the turbine was confirmed in the results of the testing. Duration requirements were met, there were no safety issues, power performance was established, and the acoustic level was verified to be low compared to other similar turbines. Data results can be assembled and submitted to the Small Wind Certification Council (SWCC) for certification of the turbine to AWEA standards.

17 WIND ENERGY↗

Data Report: TurboWave I and II Data Release

The TurboWave I and II infrasound campaigns were conducted to examine short term variability in acoustic propagation at local and regional distances. The tests were conducted in nearly co-located regions at the Energetic Materials Research and Testing Center in Socorro, NM between 2019 and 2020 and recorded across a variety of acoustic microbarometer sensors. This report details the waveform data recorded from the experiment and coincides with data archival at the Incorporated Research Institutions for Seismology. The report includes a description of the experiment along with the types of data and instruments. The data release includes raw waveform data as well as metadata information.

47 OTHER INSTRUMENTATION↗