Toward multiscale simulations of tailored microstructure formation in metal additive manufacturing
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “A. Microstructures”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Evaluation of microstructure and mechanical properties of additively manufactured Ti–5V–5Mo-5 Al-3 Cr alloy
Not Available
36 MATERIALS SCIENCE↗
Microstructural refinement of an Al-Ce-Mg alloy via Shear Assisted Processing and Extrusion
Al-Ce alloys have attracted recent interest because of their high thermal stability due to the low solubility of Ce in the Al matrix. The Al 11 Ce 3 eutectic phase gives excellent strain hardening behavior and moderate high-temperature strength in the as-cast state. However, its strengthening effect is limited by its coarse as-cast structure. Therefore, alternative manufacturing methods such as additive manufacturing or equal channel angular pressing have been applied to refine the Al 11 Ce 3 phase to good effect. However, these techniques are both expensive and time-consuming. Therefore, this study aims to use Shear Assisted Processing and Extrusion (ShAPE), an emerging solid phase processing technique that is more easily scalable than the previously mentioned methods. ShAPE can produce useful cross-sections of an Al-8Ce-4Mg alloy while refining the Al 11 Ce 3 phase to produce a higher strength material. It was found that a low temperature ShAPE process can improve the room temperature yield strength by ~60 % compared to a binary Al-4Mg alloy. Additionally, the high-temperature yield strength of the Al-Ce alloys increased by 20%, with a simultaneous 15% improvement in ductility compared to the binary Al-Mg alloy. Finally, these results highlight the potential for ShAPE as a processing technique for Al-Ce alloys.
36 MATERIALS SCIENCE↗
Self-supervised learning and prediction of microstructure evolution with convolutional recurrent neural networks
Not Available
36 MATERIALS SCIENCE↗
Programming Deformations of 3D Microstructures: Opportunities Enabled by Magnetic Alignment of Liquid Crystalline Elastomers
Not Available
36 MATERIALS SCIENCE↗
Target Configuration Effect on Microstructures and Properties of Vertically Aligned Nanocomposites
Vertically aligned nanocomposites (VANs) are unique thin films with vertical nanostructures embedded in a matrix material, allowing for the integration of two distinct materials. These nanocomposites offer novel combined physical properties, such as nanocomposite-based multiferroics and strongly coupled physical properties, such as magneto-optic coupling. Much work has been conducted in exploring different two-phase combinations and various processing conditions to achieve novel tunable properties that cannot be obtained by any single-phase material alone. Here, in this work, the target configuration effects are explored for the growth of LaFeO 3 –CoNi 2 O 4 VANs. Both mixed and pie-shaped targets are utilized to compare the target configuration effects on the phase separation, morphology tuning, and their resulting physical properties, including optical and magnetic properties. This work suggests that the target configuration is another important parameter for achieving the desired VAN morphology and can be used to design different two-phase VANs with tailorable properties.
36 MATERIALS SCIENCE↗
Self-Assembled Bilayer Microstructure Improves Quasi-2D Perovskite Light-Emitting Diodes
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Microstructural evolution and precipitation in γ-LiAlO 2 during ion irradiation
Polycrystalline γ-LiAlO 2 pellets were sequentially irradiated with 120 keV He + and 80 keV D 2 + ions to the fluences of 1 × 10 17 and 2 × 10 17 (He + + D + )/cm 2 at 573 K. Additional irradiation was performed to a fluence of 2 × 10 17 (He + + D + )/cm 2 at 773 K. The irradiated pellets were characterized using scanning transmission electron microscopy, time-of-flight secondary ion mass spectrometry, and grazing incidence x-ray diffraction. Lattice damage, amorphization, and fractures are observed with no evidence for the formation of secondary-phase precipitates in the pellets irradiated up to an ion fluence of 2 × 10 17 (He + + D + )/cm 2 at 573 K. In contrast, faceted precipitates with sizes larger than 100 nm formed in a pellet irradiated to 2 × 10 17 (He + + D + )/cm 2 at 773 K. Analyses of the diffraction and composition data suggest that the precipitates have a spinel-type structure, likely a non-stoichiometric LiAl 5 O 8 with Li depletion. This could be an intermediate phase with Li atoms at the octahedral and possibly tetrahedral sites as well. It is speculated that as the dose increases, Li loss will continue and the precipitates will approach a composition of alumina primarily in phases of α-Al 2 O 3 and amorphized Al 2 O 3 .
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Multiscale investigation of the microstructural mechanisms driving ratchet growth in PBX 9502
The high explosive PBX 9502 undergoes irreversible expansion during thermal cycling (“ratchet growth”). Recent innovations in thermomechanical modeling via homogenization strategies are beginning to incorporate mesoscale information such as grain size, total porosity, and spatial distribution of voids and cracks. To generate a complete experimental data set to challenge and inform these models, PBX 9502 pellets were thermally cycled, cross-sectioned using ion polishing, and imaged in high resolution with scanning electron microscopy. Ratchet growth was found to drive expansion through microcracking. Microcracks were affected by agglomeration of crystals within the PBX. Virgin material showed greater ratchet growth than recycled material.
36 MATERIALS SCIENCE↗
Magnetic state switching in FeGa microstructures
This work demonstrates that magnetoelectric composite heterostructures can be designed at the length scale of 10µms that can be switched from a magnetized state to a vortex state, effectively switching the magnetization off, using electric field induced strain. This was accomplished using thin film magnetoelectric heterostructures of Fe 81.4 Ga 18.6 on a single crystal (011) [Pb(Mg 1/3 Nb 2/3 )O 3 ] 0.68 -[PbTiO 3 ] 0.32 (PMN-32PT) ferroelectric substrate. Here, the heterostructures were tripped from a multi-domain magnetized state to a flux closure vortex state using voltage induced strain in a piezoelectric substrate. FeGa heterostructures were deposited on a Si-substrate for superconducting quantum interference device magnetometry characterization of the magnetic properties. The magnetoelectric coupling of a FeGa continuous film on PMN-32PT was characterized using a magneto optical Kerr effect magnetometer with bi-axial strain gauges, and magnetic multi-domain heterostructures were imaged using x-ray magnetic circular dichroism—photoemission electron microscopy during the transition to the vortex state. The domain structures were modelled using MuMax 3 , a micromagnetics code, and compared with observations. The results provide considerable insight into designing magnetoelectric heterostructures that can be switched from an ‘on’ state to an ‘off’ state using electric field induced strain.
36 MATERIALS SCIENCE↗
Microstructural pattern formation during liquid metal dealloying: Phase-field simulations and theoretical analyses
In recent years, liquid metal dealloying has emerged as a promising material processing method to generate micro- and nanoscale bicontinuous or porous structures. Most previous studies focused on the experimental characterization of the dealloying process and on the properties of the dealloyed materials, leaving the theoretical study incomplete to fully understand the fundamental mechanisms of the liquid metal dealloying process. In this paper, we use theoretical models and phase-field simulations to clarify the kinetics and pattern formation during liquid metal dealloying. Our investigation starts from a theoretical analysis of the 1D dissolution of a binary precursor alloy, which reveals that the 1D dissolution process involves two regimes. In the first regime, due to the low solubility of one of the elements in the melt, it accumulates at the solid-liquid interface, which reduces the dissolution kinetics. In the second regime, the interface kinetics reaches a stationary regime where both elements of the precursor alloy dissolve into the melt. Previous works revealed that in the early dealloying stage, the dealloying front is destabilized by an interfacial spinodal decomposition, which triggers the formation of interconnected ligaments. Here we extend this line of work by proposing a linear stability analysis able to predict the initial length scale of the ligaments formed in the initial stage of the dealloying. Combining this analysis with the 1D dissolution model proposed here enables us to better understand the initial conditions (composition of the precursor alloy and the melt) leading to a planar dissolution without interface destabilization. Finally, we report a strong influence of solid-state diffusion on dealloying. Although the solid-state diffusivity is four to five orders of magnitude smaller than in the liquid phase, it is found to affect both dissolution kinetics and ligament morphologies.
36 MATERIALS SCIENCE↗
Deformation behavior of crystalline/amorphous Al-Si nanocomposites with nanolaminate or nanofibrous microstructures
Deformation mechanisms in sputter-deposited crystalline Al/amorphous Si nanocomposites with nanolaminate or nanofibrous morphology are characterized by nanoindentation, micropillar compression testing and transmission electron microscopy (TEM). The nanofibrous composite having crystalline Al nanofibers with ~40–50 nm in length and 15–20 nm in diameter embedded in amorphous Si exhibits strain hardening to a maximum flow stress of 2.9 GPa and no shear band (SB) formation in compression up to plastic strain exceeding 24%. On the other hand, nanolaminate composite that is composed of 80 nm crystalline Al layers and 20 nm amorphous Si layers exhibits catastrophic SBs starting at plastic strains in the range of 5–10%. Cross-sectional TEM of the deformed samples reveals a high density of stacking faults and twin boundaries in Al nanofibers and no microshear bands in the nanofibrous composite, suggesting plastic deformation in amorphous Si phase and crystalline Al nanofibers. Further, molecular dynamics simulations revealed that the plastic deformation in amorphous Si phase in the cosputtered films could be favored by the decrease in flow strength of amorphous Si with increasing Al solute concentration trapped in Si.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Atomistic modeling of LiF microstructure ionic conductivity and its influence on nucleation and plating
We report the formation and degradation of the solid electrolyte interphase (SEI) and its underlying transport properties play an essential role in the overall performance of lithium-ion batteries. This paper presents classical molecular dynamics studies on polycrystalline inorganic lithium fluoride (LiF) layers to model and predict the SEI transport properties. The ionic conductivity is obtained from the lithium-ion diffusivity in polycrystalline structures of LiF using the Nernst-Einstein relation. The predicted molecular dynamics data are used in a continuum scale phase-field model to evaluate the plating kinetics under fast charging conditions. The analysis emphasizes that the SEI ionic conductivity properties impact the plating dynamics, where SEI's low ion conductivity value is prone to large plating and subsequent capacity degradation. The combination of atomic and continuum scale studies shown herein lays a foundation to tune in SEI transport properties to decrease the amount of lithium plating and improve the performance of fast-charging batteries.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
Stochastic microstructural analysis of ceramic matrix composites using a high-fidelity multiscale framework
This paper presents a high-fidelity multiscale framework to simulate the mechanical behavior of ceramic matrix composites (CMCs), accounting for the complex micromorphology captured using detailed material characterization. First, high-resolution micrographs are obtained for the specific carbon fiber silicon-carbide-nitride matrix (C/SiNC) CMC to characterize the variability of the architectural features and manufacturing-induced defects at the microscale. An image processing algorithm is then used to precisely estimate the size and distribution of all subscale features and defects from the micrographs. The information is then used to generate a three-dimensional stochastic representative volume element (SRVE) to reconstruct microscale constituents accounting for the variability. As a result, the generated SRVEs are simulated using the high-fidelity generalized method of cells (HFGMC) micromechanics theory to investigate the effects of defects on the elastic properties of C/SiNC CMCs.
Ceramic Matrix Composites↗
In Situ Microstructure Characterization of Potassium Di-Phosphate (KDP) Densification during Cold Sintering
In order for ceramic additive manufacturing (AM) to achieve its full potential, it is increasingly important to develop a more rigorous understanding of fundamental phenomena that govern the kinetics and thermodynamics of ceramic AM processes. In the case of additive build processes, such as direct ink write and ceramic extrusion, methods for densifying the resulting green-body product need to be considered to complement the efficiencies of ceramics AM, itself. One densification route, at least for monolithic components, built layer-by-layer, is offered by the recently developed cold sintering process, whereby high-density final product is achieved through addition of a small amount of liquid solvent and application of modest uniaxial compressive stress at relatively low temperature. In situ small-angle X-ray scattering methods and X-ray diffraction have been applied to characterize and quantify the pore morphology evolution during cold sintering for a model system: potassium di-phosphate, KH 2 PO 4 (KDP). It is shown that both temperature and applied stress affect the densification rate, but stress has a stronger effect on the evolving morphology. A regime with an approximate linear densification rate can be identified, yielding an effective densification activation energy of ≈90 kJ/mol.
36 MATERIALS SCIENCE↗