Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind deployment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

SEDS1 mission software verification using a signal simulator

The first flight of the Small Expendable Deployer System (SEDS1) is schedule to fly as the secondary payload of a Delta 2 in March, 1993. The objective of the SEDS1 mission is to collect data to validate the concept of tethered satellite systems and to verify computer simulations used to predict their behavior. SEDS1 will deploy a 50 lb. instrumented satellite as an end mass using a 20 km tether. Langley Research Center is providing the end mass instrumentation, while the Marshall Space Flight Center is designing and building the deployer. The objective of the experiment is to test the SEDS design concept by demonstrating that the system will satisfactorily deploy the full 20 km tether without stopping prematurely, come to a smooth stop on the application of a brake, and cut the tether at the proper time after it swings to the local vertical. Also, SEDS1 will collect data which will be used to test the accuracy of tether dynamics models used to stimulate this type of deployment. The experiment will last about 1.5 hours and complete approximately 1.5 orbits. Radar tracking of the Delta II and end mass is planned. In addition, the SEDS1 on-board computer will continuously record, store, and transmit mission data over the Delta II S-band telemetry system. The Data System will count tether windings as the tether unwinds, log the times of each turn and other mission events, monitor tether tension, and record the temperature of system components. A summary of the measurements taken during the SEDS1 are shown. The Data System will also control the tether brake and cutter mechanisms. Preliminary versions of two major sections of the flight software, the data telemetry modules and the data collection modules, were developed and tested under the 1990 NASA/ASEE Summer Faculty Fellowship Program. To facilitate the debugging of these software modules, a prototype SEDS Data System was programmed to simulate turn count signals. During the 1991 summer program, the concept of simulating signals produced by the SEDS electronics systems and circuits was expanded and more precisely defined. During the 1992 summer program, the SEDS signal simulator was programmed to test the requirements of the SEDS Mission software, and this simulator will be used in the formal verification of the SEDS Mission Software. The formal test procedures specification was written which incorporates the use of the signal simulator to test the SEDS Mission Software and which incorporates procedures for testing the other major component of the SEDS software, the Monitor Software.

Pierson, William E.↗

Phytoplankton production in the Sargasso Sea as determined using optical mooring data

Optical measurements from an untended mooring provide high-frequency observations of in-water optical properties and permit the estimation of important biological parameters continuously as a function of time. A 9-month time series, composed of three separate deployments, of optical data from the BIOWATT 1987 deep-sea mooring located in the oligotrophic waters of the Sargasso Sea at 34 deg N, 70 deg W are presented. These data have been tested using several bio-optical models for the purpose of providing a continuous estimate of phytoplankton productivity. The data are discussed in the context of contemporaneous shipboard observations and for future ocean color satellite observations. We present a continuous estimation of phytoplankton productivity for the 9-month time series. Results from the first 70-day deployment are emphasized to demonstrate the utility of optical observations as proxy measures of biological parameters, to present preliminary analysis, and to compare our bio-optical observations with concurrent physical observations. The bio-optical features show variation in response to physical forcings including diel variations of incident solar irradiance, episodic changes corresponding to wind forcing, variability caused by advective mesoscale eddy events in the vicinity of the mooring, and seasonal variability corresponding to changes in solar radiation, shoaling of the mixed layer depth, and succession of phytoplankton populations.

Waters, K. J.↗

Spherical Occulter Coronagraph Cubesat

The present invention relates to a space-based instrument which provides continuous coronal electron temperature and velocity images, for a predetermined period of time, thereby improving the understanding of coronal evolution and how the solar wind and Coronal Mass Ejection transients evolve from the low solar atmosphere through the heliosphere for an entire solar rotation. Specifically, the present invention relates to using a 6U spherical occulter coronagraph CubeSat, and a relative navigational system (RNS) that controls the position of the spacecraft relative to the occulting sphere. The present invention innovatively deploys a free-flying spherical occulter, and after deployment, the actively controlled CubeSat will provide an inertial formation flying with the spherical occulter and Sun.

Davila, Joseph M.↗

Design and Testing of a Solid-Liquid Interface Monitor for High-Level Waste Tanks

A high-level waste (HLW) monitor has been designed, fabricated and tested at full-scale for deployment inside a Hanford tank. The Solid-Liquid Interface Monitor (SLIM) integrates a commercial sonar system with a mechanical deployment system for deploying into an underground waste tank. The system has undergone several design modifications based upon changing requirements at Hanford. We will present the various designs of the monitor from first to last and will present performance data from the various prototype systems. We will also present modeling of stresses in the enclosure under 85 mph wind loading. The system must be able to function at winds up to 15 mph and must withstand a maximum loading of 85 mph. There will be several examples presented of engineering tradeoffs made as FIU analyzed new requirements and modified the design to accommodate. We will present our current plans for installing into the Cold Test Facility at Hanford and into a double-shelled tank at Hanford. Finally, we will present our vision for how this technology can be used at Hanford and Savannah River Site to improve the filling and emptying of high-level waste tanks. In conclusion: 1. The manually operated first-generation SLIM is a viable option on tanks where personnel are allowed to work on top of the tank. 2. The remote controlled second-generation SLIM can be utilized on tanks where personnel access is limited. 3. The totally enclosed fourth-generation SLIM, when the design is finalized, can be used when the possibility exists for wind dispersion of any HLW that maybe on the system. 4. The profiling sonar can be used effectively for real-time monitoring of the solid-liquid interface over a large area. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of a Hydrodynamic and Transport model of Bellingham Bay in Support of Nearshore Habitat Restoration

In this study, a hydrodynamic model based on the unstructured-grid finite volume coastal ocean model (FVCOM) was developed for Bellingham Bay, Washington. The model simulates water surface elevation, velocity, temperature, and salinity in a three-dimensional domain that covers the entire Bellingham Bay and adjacent water bodies, including Lummi Bay, Samish Bay, Padilla Bay, and Rosario Strait. The model was developed using Pacific Northwest National Laboratory’s high-resolution Puget Sound and Northwest Straits circulation and transport model. A sub-model grid for Bellingham Bay and adjacent coastal waters was extracted from the Puget Sound model and refined in Bellingham Bay using bathymetric light detection and ranging (LIDAR) and river channel cross-section data. The model uses tides, river inflows, and meteorological inputs to predict water surface elevations, currents, salinity, and temperature. A tidal open boundary condition was specified using standard National Oceanic and Atmospheric Administration (NOAA) predictions. Temperature and salinity open boundary conditions were specified based on observed data. Meteorological forcing (wind, solar radiation, and net surface heat flux) was obtained from NOAA real observations and National Center for Environmental Prediction North American Regional Analysis outputs. The model was run in parallel with 48 cores using a time step of 2.5 seconds. It took 18 hours of cpu time to complete 26 days of simulation. The model was calibrated with oceanographic field data for the period of 6/1/2009 to 6/26/2009. These data were collected specifically for the purpose of model development and calibration. They include time series of water-surface elevation, currents, temperature, and salinity as well as temperature and salinity profiles during instrument deployment and retrieval. Comparisons between model predictions and field observations show an overall reasonable agreement in both temporal and spatial scales. Comparisons of root mean square error values for surface elevation, velocity, temperature, and salinity time series are 0.11 m, 0.10 m/s, 1.28oC, and 1.91 ppt, respectively. The model was able to reproduce the salinity and temperature stratifications inside Bellingham Bay. Wetting and drying processes in tidal flats in Bellingham Bay, Samish Bay, and Padilla Bay were also successfully simulated. Both model results and observed data indicated that water surface elevations inside Bellingham Bay are highly correlated to tides. Circulation inside the bay is weak and complex and is affected by various forcing mechanisms, including tides, winds, freshwater inflows, and other local forcing factors. The Bellingham Bay model solution was successfully linked to the NOAA oil spill trajectory simulation model “General NOAA Operational Modeling Environment (GNOME).” Overall, the Bellingham Bay model has been calibrated reasonably well and can be used to provide detailed hydrodynamic information in the bay and adjacent water bodies. While there is room for further improvement with more available data, the calibrated hydrodynamic model provides useful hydrodynamic information in Bellingham Bay and can be used to support sediment transport and water quality modeling as well as assist in the design of nearshore restoration scenarios.

02 PETROLEUM↗

MLBS tower profiling lidar

The tower profiling lidar #ZX300-1381 was deployed on top of the 30 m tall MLBS NEON tower in an Appalachian forest. Prior to being deployed at MLBS, this lidar was on top of the tower at WREF in Washington. The zip files contain high frequency data. The Excel files are 10-min averages.

17 WIND ENERGY↗

Site G - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site G. Z07 refers to the seventh height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site G - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site G. Z06 refers to the sixth height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site G - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site G. Z05 refers to the fifth height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site G - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site G. Z04 refers to the fourth height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site G - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site G. Z03 refers to the third height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site G - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site G. Z02 refers to the second height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site G - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site G. Z01 refers to the first height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site A1 - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site A1. Z06 refers to the sixth height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site A1 - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site A1. Z01 refers to the first height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗

Site A1 - Atmospheric Sensor / Reviewed Data

This dataset contains meteorological measurements including temperature, pressure, and relative humidity at multiple heights deployed on tethered balloon system at AWAKEN site A1. Z04 refers to the fourth height position of the iMet-XQ2 mounted on the tethered balloon.

17 WIND ENERGY↗