Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “value of data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Second spectrum of chromium (Cr II), Part III: Radiative lifetimes and transition probabilities from highly excited 3d{sup 4}5s levels

In this study we have extended our previous investigations of Cr II spectrum to levels of the 3d{sup 4}5s configuration. Once again an overall good agreement is observed for these levels between experimental oscillator strength values and our calculated data using two different approaches, namely the oscillator strength parameterization and the HFR+CPOL methods. Recurring to the latter model we have computed radiative lifetime values for 20 3d{sup 4}5s levels, confirming the well founded basis of recent experimental data, given in literature. From the use of the former method and with the help of a least squares fitting procedure to available experimental gf-values we have taken advantage of extracting for the first time the transition radial integral value for 3d{sup 4}4p−3d{sup 4}5s, 〈4p|r{sup 1}|5s〉=1.962±0.005, which is confirmed favorably by ab initio results, obtained by the HFR method scaled by a factor 0.92 or directly by the HFR+CPOL approach. Finally a long list of semi-empirical oscillator strength, transition probability and branching fraction values is generated for around 500 Cr II transitions depopulating the 3d{sup 4}5s levels. Our new gf data are compared successfully with those given by Kurucz.

74 ATOMIC AND MOLECULAR PHYSICS↗

A comparison of measured spacecraft modal damping values

The prediction and the measurement of modal damping values of spacecrafts for use in the determination of design loads were summarized. Realistic transient forcing functions were used. The solution of complex eigenvalue response solutions resulting from modal synthesis of subsystems in which each subsystem is assigned modal damping values is discussed. Damping data on both the Voyager and the Galileo spacecrafts using up to eight different types of techniques to analyze modal data are presented. It is concluded that it is difficult to estimate the true damping of a structure and the measured damping values which are dependent on the analysis method of the data.

Wada, B. K.↗

Recent Progress on Surface Water Quality Models Utilizing Machine Learning Techniques

Surface waterbodies are heavily exposed to pollutants caused by natural disasters and human activities. Empowering sensor technologies in water quality monitoring, sufficient measurements have become available to develop machine learning (ML) models. Numerous ML models have quickly been adopted to predict water quality indicators in various surface waterbodies. This paper reviews 78 recent articles from 2022 to October 2024, categorizing water quality models utilizing ML into three groups: Point-to-Point (P2P), which estimates the current target value based on other measurements at the same time point; Sequence-to-Point (S2P), which utilizes previous time series data to predict the target value at one time point ahead; and Sequence-to-Sequence (S2S), which uses previous time series data to forecast sequential target values in the future. The ML models used in each group are classified and compared according to water quality indicators, data availability, and model performance. Widely used strategies for improving performance, including feature engineering, hyperparameter tuning, and transfer learning, are recognized and described to enhance model effectiveness. The interpretability limitations of ML applications are discussed. This review provides a perspective on emerging ML for surface water quality models.

machine learning (ML)↗

Transcriptomics Processing Pipelines for Space Biology: An Open Source and Consensus-Driven Approach

Transcriptomics holds significant value in elucidating the relationship between gene expression, experimental factors, biological factors, and various types of omics data. Enhancing our understanding of these connections is paramount for foundational biology, which plays a pivotal role in devising solutions for challenges pertinent to both space travel and terrestrial life. The NASA GeneLab project, part of the Open Science Data Repository (OSDR.nasa.gov), seeks to accelerate space biology research through cataloging and democratizing ‘omics data, including transcriptomics. Since raw omics data are largely inaccessible to non-bioinformaticians, GeneLab works with the scientific community via the Open Science Analysis Working Groups (AWGs) to develop standard processing pipelines to generate and publish processed data. Unlike raw data, processed data have greater immediate value to diverse users with varying technical backgrounds and computational capabilities. Standardizing processing workflows is essential to match the pace of raw data generation, ensure reproducibility, and enable standardized processed data for comparison across datasets. As of June 2023, transcriptomics studies comprise over half of GeneLab datasets hosted on the OSDR, including data from bulk RNA-seq and Affymetrix or Agilent 1-Channel DNA microarray assays. In collaboration with the AWGs, GeneLab developed consensus processing pipelines for these transcriptomics data types that includes quality control, background correction (microarray only), data normalization and quantification, culminating in the detection and annotation of differentially expressed genes. The work presented here describes Nextflow implementations of GeneLab’s consensus transcriptomics pipelines that automates and accelerates processing of these datasets. In addition to the core data processing, these workflows also include raw data staging and a robust verification and validation program to identify errors in real-time, stop additional downstream computation, and preserve computational resources. These workflows are used to generate GeneLab processed data hosted on the OSDR, and are publicly available as open source software for others to use at: https://github.com/nasa/GeneLab_Data_Processing.

Jonathan Oribello↗

Comparison of Burnup Credit Uncertainty Quantification Methods

The recent revision of Interim Staff Guidance (ISG-8 revision 3), issued by the US Nuclear Regulatory Commission, on burnup credit for criticality safety analysis of pressurized water reactor spent fuel in transportation and storage casks expands the nuclides that can be credited in the fuel composition to include minor actinides and fission products. The technical basis for development of the uncertainties associated with calculated nuclide concentrations in spent nuclear fuel that are recommended in ISG-8 was established through the use of measured isotopic data acquired from destructive radiochemical assay data for spent fuel samples. These data provide a direct experimental basis for determining uncertainties in the calculated nuclide concentrations. To provide additional insight into code uncertainties resulting from nuclear data and also the level of conservatism associated with using experimental assay benchmark data for uncertainty evaluation, a new uncertainty analysis tool in the SCALE code system that performs stochastic sampling of nuclear data has been applied to representative burnup credit calculations for spent fuel pool and dry cask storage applications methodology. The nuclear data uncertainty analysis capabilities in Sampler can account for uncertainty contributions from cross sections, fission yields, and decay data by using correlated sampling of covariance files developed for all nuclear data used by SCALE. These uncertainties associated with nuclear data evaluations are compared to corresponding values developed in ISG-8 that are based on destructive assay data, as well as to values obtained using an alternate methodology that was developed by the Electric Power Research Institute based on reactor core simulation data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Completeness and coverage of open-access freshwater fish distribution data in the United States

Aim: Primary biodiversity data constitute observations of particular species at given points in space and time. Open-access databases provide unprecedented access to these data, but their utility depends on how complete species inventories are at a given surveying resolution and how uniformly distributed surveys are in space and time. Our aim was to characterize the completeness of freshwater fish data across spatial scales and among habitat types (lotic stream reaches and lentic waterbodies), and assess coverage bias in space and time. Location: Freshwater habitats of the contiguous United States. Methods: We compiled fish occurrence records from the Global Biodiversity Information Facility (GBIF), the Multi-state Aquatic Resources Information Server (MARIS), and three federally-administered surveys (EMAP, NAQWA, NRS). Next, we evaluated survey completeness across seven spatial resolutions representing nested stream catchments, and separately for lotic and lentic habitats. Lastly, we tested for bias in survey coverage along environmental and temporal gradients for each habitat type. Results: A total of 39,855,157 records representing 1925 species were available from 1800 to 2014. The percent of catchments surveyed increased as spatial resolution decreased while the density of occurrence records within surveyed catchments decreased. Species richness also increased with catchment size consistent with putative species–area relationships. Occurrence records were distributed among 72,114 lotic reaches and 3,325 lentic waterbodies throughout the contiguous US. Seven percent (N=5,055) of surveyed lotic reaches and 23% (N=771) of surveyed lentic waterbodies were well-surveyed based on the most conservative thresholds for two completeness indices. Most well-surveyed lotic reaches (95%) and undammed lentic waterbodies (97%) were completed since 1980, and most were surveyed during only one 20-year time interval (83% and 56% for lotic and lentic waterbodies, respectively). Coverage analyses indicated that contemporary and future climates corresponding to regions along the west coast and gulf coast are the most under-represented for both lotic and lentic habitats. Small lentic waterbodies (surface area < 0.1 km2) are also under-represented. Main Conclusions: Contemporary surveys of lotic reaches and, to a lesser extent, lentic waterbodies are plentiful and generally representative of climatic and landscape characteristics. Data compilation efforts should focus on adding historical data to public repositories. Clustering of well-surveyed waterbodies in MARIS-participating states highlights the value of state-agency data and demonstrates the need for dissemination of these data by more state agencies.

60 APPLIED LIFE SCIENCES↗

The analysis of shape data including normalization and the impact on prompt fission neutron spectrum measurements

While measurements of physical quantities contain an intrinsic absolute scale based on details of the experiment, sometimes only the value of each measured data point relative to the others, i.e., the shape, is of interest. Additionally, in contrast to absolute measurements of quantities like nuclear cross sections, shape measurements are unique in that the result is contained entirely in the relative value of each measured point with respect to all others. This fundamental attribute of shape data is sometimes discussed by data evaluators, but it is common that shape data are reported by experimenters with covariances directly from the raw data as though an absolute measurement has been performed, thereby misrepresenting the true knowledge of the measured shape. A normalization procedure must be carried out including careful covariance propagation in order to accurately represent the uncertainty in a measured shape. Known consequences of this procedure, such as the exclusion of constant fully-correlated uncertainties, are sometimes applied ad hoc to shape data. However, normalization also produces features of shape data that are otherwise difficult to apply, such as partial exclusion of strongly-correlated uncertainty sources, a redistribution of uncertainties across data points, and consistency of the covariance matrix obtained when combining separate shape measurements. In this study all of the above features are shown in a generalized fashion and exhibited using prompt fission neutron spectrum data from the Chi-Nu experiment with recommendations for analysis of future shape measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Chemical model for cement-based materials: Temperature dependence of thermodynamic functions for nanocrystalline and crystalline C-S-H phases

In the context of waste confinement and, more specifically, waste from the nuclear industry, concrete is used both as a confinement and as a building material. Its exposure to high temperatures makes its geochemical behavior difficult to predict over large periods of time. The present work aims to elucidate the solubility constants, as a function of temperature, for the phases of the system CaO-SiO{sub 2}-H{sub 2}O. For the nanocrystalline phases, the present work investigates the existence of compounds of fixed composition, possibly in a metastable state. The question of whether the nanocrystalline C-S-H phases correspond to a series of phases of discrete composition or a solid solution is discussed and compared to the possible influence of impurities in the solid phases. For the crystalline phases, having established that the currently available values of thermodynamic properties were not consistent, we show that their refinement leads to a better agreement with the literature data. From the refined thermodynamic properties of crystalline C-S-H, a polyhedral decomposition model is developed. It enables to estimate the enthalpy of formation and the heat capacity of nanocrystalline C-S-H phases. Finally, verification shows that such phases remain unstable compared to the crystalline phases, at room or higher temperatures. A comparison, based on reaction enthalpies derived from experimental data indicates that predicted values for nanocrystalline C-S-H are in close agreement with experimental data. By estimating the properties of okenite and truscottite with the model developed in this study, we have been able to complete the CaO-SiO{sub 2}-H{sub 2}O phase diagram with a reasonable agreement with the literature. The case of jaffeite remains open to discussion. Finally, for the hydrate C2SH,alpha, the model predicts a transition with hillebrandite at 159 deg. C, in contradiction with the hypothesis of C2SH,alpha metastability.

36 MATERIALS SCIENCE↗

The orbit of Phi Cygni measured with long-baseline optical interferometry - Component masses and absolute magnitudes

The orbit of the double-lined spectroscopic binary Phi Cygni, the distance to the system, and the masses and absolute magnitudes of its components are presented via measurements with the Mar III Optical Interferometer. On the basis of a reexamination of the spectroscopic data of Rach & Herbig (1961), the values and uncertainties are adopted for the period and the projected semimajor axes from the present fit to the spectroscopic data and the values of the remaining elements from the present fit to the Mark III data. The elements of the true orbit are derived, and the masses and absolute magnitudes of the components, and the distance to the system are calculated.

Armstrong, J. T.↗

Petrologic model of the northern Mississippi embayment based on satellite magnetic and ground based geophysical data

Magnetization, derived from gravity-seismic data from the northern Mississippi Embayment, is evaluated relative to magnetization values obtained from satellite magnetic data. A magnetization contrast of approximately -0.54 A/m determined from the geophysical model compares favorably to a value of approximately -0.47 A/m from MAGSAT United States Apparent Magnetization contrast map. The negative magnetization contrast, required by the MAGSAT data, is unusual as rift zones with the exception of those which are currently active are associated with positive magnetization. The model presented favors an intrusion of low Curie temperature mafic rock at the base of the crust. Alternate possibilities, a shallow Curie isotherm or remanence in a direction other than that of the current main field, seem less likely as reported regional heat flow values are too low and remanence is attenuated at depth.

Thomas, H. H.↗

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

Supervised and cluster block training statistics were used to analyze the thematic mapper simulation MSS data (both 1979 and 1980 data sets). Cover information classes identified on SAR imagery include: hardwood, pine, mixed pine hardwood, clearcut, pasture, crops, emergent crops, bare soil, urban, and water. Preliminary analysis of the HH and HV polarized SAR data indicate a high variance associated with each information class except for water and bare soil. The large variance for most spectral classes suggests that while the means might be statistically separable, an overlap may exist between the classes which could introduce a significant classification error. The quantitative values of many cover types are much larger on the HV polarization than on the HH, thereby indicating the relative nature of the digitized data values. The mean values of the spectral classes in the areas with larger look angles are greater than the means of the same cover type in other areas having steeper look angles. Difficulty in accurately overlaying the dual polarization of the SAR data was resolved.

Hoffer, R. M.↗

Universal parameters of bulk-solvent masks

The bulk solvent is a major component of biomacromolecular crystals that contributes significantly to the observed diffraction intensities. Accurate modelling of the bulk solvent has been recognized as important for many crystallographic calculations. Owing to its simplicity and modelling power, the flat (mask-based) bulk-solvent model is used by most modern crystallographic software packages to account for disordered solvent. In this model, the bulk-solvent contribution is defined by a binary mask and a scale (scattering) function. The mask is calculated on a regular grid using the atomic model coordinates and their chemical types. The grid step and two radii, solvent and shrinkage, are the three parameters that govern the mask calculation. They are highly correlated and their choice is a compromise between the computer time needed to calculate the mask and the accuracy of the mask. It is demonstrated here that this choice can be optimized using a unique value of 0.6 Å for the grid step irrespective of the data resolution, and the radii values adjusted correspondingly. The improved values were tested on a large sample of Protein Data Bank entries derived from X-ray diffraction data and are now used in the computational crystallography toolbox ( CCTBX ) and in Phenix as the default choice.

36 MATERIALS SCIENCE↗

Conduction mechanisms in thin atomic layer deposited Al{sub 2}O{sub 3} layers

Thin Al{sub 2}O{sub 3} layers of 2–135 nm thickness deposited by thermal atomic layer deposition at 80 °C were characterized regarding the current limiting mechanisms by increasing voltage ramp stress. By analyzing the j(U)-characteristics regarding ohmic injection, space charge limited current (SCLC), Schottky-emission, Fowler-Nordheim-tunneling, and Poole-Frenkel-emission, the limiting mechanisms were identified. This was performed by rearranging and plotting the data in a linear scale, such as Schottky-plot, Poole-Frenkel-plot, and Fowler-Nordheim-plot. Linear regression then was applied to the data to extract the values of relative permittivity from Schottky-plot slope and Poole-Frenkel-plot slope. From Fowler-Nordheim-plot slope, the Fowler-Nordheim-energy-barrier was extracted. Example measurements in addition to a statistical overview of the results of all investigated samples are provided. Linear regression was applied to the region of the data that matches the realistic values most. It is concluded that ohmic injection and therefore SCLC only occurs at thicknesses below 12 nm and that the Poole-Frenkel-effect is no significant current limiting process. The extracted Fowler-Nordheim-barriers vary in the range of up to approximately 4 eV but do not show a specific trend. It is discussed whether the negative slope in the Fowler-Nordheim-plot could in some cases be a misinterpreted trap filled limit in the case of space charge limited current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

colormap_util

Our Python module, colormap_module, presented here can be used to analyze and manipulate colormaps and has two main aims: (i) compare existing and new custom colormaps quantitatively by comparing their values in a color space, called CAM02-UCS, that directly shows how a human perceives their hue, saturation, and lightness values and (ii) create isoluminant colormaps from existing or custom colormaps and (iii) mix isoluminant colormap data with a 4th dimension of data by manipulating lightness values across the image and present the new image. Our module was designed to be a tool for the community to use as a whole, allowing scientists to present, analyze, and manipulate colormaps they have created and/or decided to use for a particular type of data. By being able to do this, the scientific community as a whole will think more about the colormaps they choose, see why particular colormaps are bad to use for certain types of data, and move toward using colormaps our eyes can interpret much more efficiently.

Source record↗

colormap_util

Our Python module, colormap_module, presented here can be used to analyze and manipulate colormaps and has two main aims: (i) compare existing and new custom colormaps quantitatively by comparing their values in a color space, called CAM02-UCS, that directly shows how a human perceives their hue, saturation, and lightness values and (ii) create isoluminant colormaps from existing or custom colormaps and (iii) mix isoluminant colormap data with a 4th dimension of data by manipulating lightness values across the image and present the new image. Our module was designed to be a tool for the community to use as a whole, allowing scientists to present, analyze, and manipulate colormaps they have created and/or decided to use for a particular type of data. By being able to do this, the scientific community as a whole will think more about the colormaps they choose, see why particular colormaps are bad to use for certain types of data, and move toward using colormaps our eyes can interpret much more efficiently.

Source record↗

Cation Data for the East River Watershed, Colorado (2014-2025)

This data package contains mean values for cation concentration for water samples taken from the East River Watershed in Colorado. Inductively coupled plasma mass spectrometry (ICP-MS) has been used to measure the concentrations of elements of interest simultaneously for the East River Watershed, Colorado groundwater and surface water samples to inform insights on the biogeochemistry processes within the watershed. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. For samples collected prior to 06-16-2021, the instrumentation, Elan DRC II, PerkinElmer SCIEX, automatically switches among the three models necessary to analyze all 37 elements. These 37 elements include: (1) Lithium (Li), Beryllium (Be), Boron (B), Sodium (Na), Magnesium (Mg), Aluminium (Al), Silicon (Si), Phosphorus (P), Titanium (Ti), Cobalt (Co), Nickel (Ni), Copper (Cu), Zinc (Zn), Germanium (Ge), Arsenic (As), Rubidium (Rb), Strontium (Sr), Zirconium (Zr), Molybdenum (Mo), Silver (Ag), Cadmium (Cd), Tin (Sn), Antimony (Sb), Caesium (Cs), Barium (Ba), Europium (Eu), Lead (Pb), Thorium (Th), Uranium (U) using standard model, argon Ar as reaction gas, (2) Potassium (K), Calcium (Ca), Vanadium (V), Chromium (Cr), Manganese (Mn), Iron (Fe) using dynamic reaction cell (DRC) model, ammonia NH3 as reaction gas, and (3) Phosphorus (P) and Selenium (Se) using DRC model, oxygen O2 as reaction gas. Note for the samples with higher concentrations of chloride (Cl-), asenic (As) concentrations were analysed with DRC model (oxygen O2 as reaction gas) to avoid the interference of chloride. For samples collected on and after 06-16-2021, an advanced Agilent 8900 triple quadrupole inductively coupled plasma mass spectrometry system (Agilent 8900 QQQ ICP-MS, Agilent Technologies) has been used to measure the concentrations of interested 36 elements simultaneously for environmental samples, including (1) Lithium (Li), Beryllium (Be) and Boron (B) using standard no gas mode, (2) Sodium (Na), Magnesium (Mg), Aluminium (Al) Phosphorus (P), Potassium (K), Chromium (Cr), Manganese (Mn), Iron (Fe), Cobalt (Co), Nickel (Ni), Copper (Cu), Zinc (Zn), Germanium (Ge), Arsenic (As), Rubidium (Rb), Strontium (Sr), Zirconium (Zr), Molybdenum (Mo), Silver (Ag), Cadmium (Cd), Tin (Sn), Antimony (Sb), Cesium (Cs), Barium (Ba), Europium (Eu), Lead (Pb), Thorium (Th) and Uranium (U) using standard helium (He) collision mode, (3) Titanium (Ti) and Vanadium (V) using high Energy (HEHe) helium (He) collision mode, and (4) Silicon (Si), Calcium (Ca) and Selenium (Se) using standard H2 reaction mode. All samples were prepared/diluted with 2% (v/v) ultrapure nitric acid in Milli-Q water (18.2 mega ohm-cm), and analyzed under a rigorous quality assurance and quality control (QA/QC) process. This data package contains (1) a zip file (cation_data_2014_2025.zip) containing a total of 5,849 files: 5.848 data files of cation data from across the Lawrence Berkeley National Laboratory (LBNL) Watershed Function Scientific Focus Area (SFA) which is reported in .csv files per location and a locations.csv (1 file) with latitude and longitude for each location; (2) a file-level metadata (v6_20260901_flmd.csv) file that lists each file contained in the dataset with associated metadata; (3) a data dictionary (v6_20260901_dd.csv) file that contains terms/column_headers used throughout the files along with a definition, units, and data type; (4) PDF and docx files for the detemination of Method Detection Limits (MDLs) for ICP-MS PerkinElmer DRC II instrumentation (Detemination_of_Method_Detection_Limits__MDLs__for_ICP_MS__PerkinElmer_Elan_DRC_II__LBL_Bldg74_Lab214D) for samples before November 2021; (5) PDF and docx files for the determination of MDLs for ICP-MS Agilent 8900 QQQ instrumentation (ICP_MS_Analysis_detection_limits_and_QA_QC_WenmingDong_updated_2026-08-06) for samples November 2021 and onward. Missing values within the anion data files are noted as either "-9999" or "0.0" for not detectable (N.D.) data. There are a total of 113 locations containing cation data. Update on 2021-04-11: Added Detemination of Method Detection Limits (MDLs) for ICP-MS document, which can be accessed as a PDF or with Microsoft Word. Update on 2022-06-10: versioned updates to this dataset was made along with these changes: (1) updated cation data for all locations up to 2021-12-31, (2) removal of units from column headers in datafiles, (3) added row underneath headers to contain units of variables, (4) removed suffix and prefix on two variables (“aqberylliumion_asberyllium” and “aqlithiumion_aslithium”), (5) added -9999 for empty numerical cells, and (6) the addition of the file-level metadata (flmd.csv) and data dictionary (dd.csv) were added to comply with the File-Level Metadata Reporting Format. Update on 2022-09-09: Updates were made to reporting format specific files (file-level metadata and data dictionary) to correct swapped file names, add additional details on metadata descriptions on both files, add a header_row column to enable parsing, and add version number and date to file names (v2_20220909_flmd.csv and v2_20220909_dd.csv). Update on 2023-08-08: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-01-05. The file level metadata and data dictionary files were updated to reflect the additional data added. Update on 2024-03-11: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-10-16. Further, revisions to the data files were made to remove incorrect data points (from 1970 and 2001). The reporting format specific files were updated to reflect the additional data added. Updated versions of the PDF and docx files for determination of MDLs for ICP-MS data were added to this dataset for samples starting in November 2021. Update on 2025-05-15: Updates were made to both the data files and reporting format specific files. New available cation data was added, up until the end of WY2024 (September 30, 2024). International Generic Sample Numbers (IGSNs), when registered, were added to the data files. The reporting format specific files were updated to reflect the additional data added. Update on 2026-09-01: Updates were made to both the data files and reporting format specific files. New available cation data was added, up until the end of WY2025 (September 30, 2025). Updated versions, as of 2026-08-06, of the PDF and docx files for determination of MDLs for ICP-MS data were added to this dataset for samples starting in November 2021.

54 ENVIRONMENTAL SCIENCES↗

The significance of biomass burning as a source of carbon monoxide and ozone in the Southern Hemisphere tropics - A satellite analysis

Carbon monoxide mixing ratios obtained by the October 1984 Measurement of Air Pollution from Satellites (MAPS) experiment are compared with the distribution of October 1984 Total Ozone Mapping Spectrometer (TOMS) ozone concentrations. The TOMS and MAPS data show coincident high values of ozone and carbon monoxide over central South America and southeastern Africa. The 1984 MAPS data are also compared with tropospheric ozone concentrations derived from 6 years of TOMS and Stratospheric Aerosol and Gas Experiment (SAGE) I and II measurements. Examination of the October climatological distribution of tropospheric ozone also reveals high concentrations over central South America and southeastern Africa. These coincident high values of CO and ozone in the rural southern tropics are most likely due to biomass burning and the subsequent transport of CO and ozone by large-scale weather patterns. It appears that both CO and ozone are being transported thousands of kilometers from their source regions by the prevailing winds.

Watson, Catherine E.↗

Learning and meta-learning of stochastic advection–diffusion–reaction systems from sparse measurements

Physics-informed neural networks (PINNs) were recently proposed in [18] as an alternative way to solve partial differential equations (PDEs). A neural network (NN) represents the solution, while a PDE-induced NN is coupled to the solution NN, and all differential operators are treated using automatic differentiation. Here, we first employ the standard PINN and a stochastic version, sPINN, to solve forward and inverse problems governed by a non-linear advection–diffusion–reaction (ADR) equation, assuming we have some sparse measurements of the concentration field at random or pre-selected locations. Subsequently, we attempt to optimise the hyper-parameters of sPINN by using the Bayesian optimisation method (meta-learning) and compare the results with the empirically selected hyper-parameters of sPINN. In particular, for the first part in solving the inverse deterministic ADR, we assume that we only have a few high-fidelity measurements, whereas the rest of the data is of lower fidelity. Hence, the PINN is trained using a composite multi-fidelity network, first introduced in [12], that learns the correlations between the multi-fidelity data and predicts the unknown values of diffusivity, transport velocity and two reaction constants as well as the concentration field. For the stochastic ADR, we employ a Karhunen–Loève (KL) expansion to represent the stochastic diffusivity, and arbitrary polynomial chaos (aPC) to represent the stochastic solution. Correspondingly, we design multiple NNs to represent the mean of the solution and learn each aPC mode separately, whereas we employ a separate NN to represent the mean of diffusivity and another NN to learn all modes of the KL expansion. For the inverse problem, in addition to stochastic diffusivity and concentration fields, we also aim to obtain the (unknown) deterministic values of transport velocity and reaction constants. The available data correspond to 7spatial points for the diffusivity and 20 space–time points for the solution, both sampled 2000 times. We obtain good accuracy for the deterministic parameters of the order of 1–2% and excellent accuracy for the mean and variance of the stochastic fields, better than three digits of accuracy. In the second part, we consider the previous stochastic inverse problem, and we use Bayesian optimisation to find five hyper-parameters of sPINN, namely the width, depth and learning rate of two NNs for learning the modes. Here, we obtain much deeper and wider optimal NNs compared to the manual tuning, leading to even better accuracy, i.e., errors less than 1% for the deterministic values, and about an order of magnitude less for the stochastic fields.

97 MATHEMATICS AND COMPUTING↗