Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Command of active and responsive elastomers by topological defects and patterns

The project resulted in the development of stimuli-responsive elastomer coatings formed by photopolymerized liquid crystal molecules. The molecular orientation of the liquid crystal elastomers is coupled to rubber-like elasticity. The project developed an approach to produce complex patterns of molecular orientation in elastomers by employing photopatterning technique based on plasmonic metamasks that convert unpolarized incoming light into a transmitted light beam with spatially-varying linear polarization. The polarization-modulated light beam aligns the film of azodye molecules, which serves as the substrate for liquid crystal elastomer coating. The alignment of the azodye molecules follows the polarization pattern with a phase shift of the alignment direction by 90 degrees. The azodye substrate imposes orientation of molecules in the adjacent liquid crystal layer which is preserved after the monomers are polymerized into a liquid crystal elastomer. By using differently aligned substrates one could produce various patterns of molecular orientation in the elastomer, which dictate the mechanical properties of the elastomers and their response to external stimuli such as temperature, humidity, and ultraviolet irradiation. In particular, the predesigned molecular orientation produces deterministically defined topography response of the liquid crystal coatings, in which their free surface changes from flat to either locally elevated or locally compressed, depending on whether the pre-inscribed molecular orientation is predesigned with a splay or bend deformation. The research established that the mechanism of this deterministic relation between the dynamic topography and pre-inscribed molecular orientation is rooted in the change of the tensorial order parameter that characterizes the degree of orientational order, and in the contraction/expansion of polymer molecules in response to the order parameter changes. In particular, lowering the order causes contraction of polymer globules. The work demonstrated that the dynamic topography of elastomer coatings with three-dimensional pattern of orientational order includes up and down motion of the material (along the normal to the coating) and also shifts in lateral directions. We demonstrate that the deterministic relationship between the orientational patterns and variations of coatings’ profile is caused by forces that are mathematically equivalent to active forces in the system of “pullers” or “pushers” in active matter, demonstrating universality of the out-of-equilibrium behavior. The project resulted in theoretical models that predictively describe the dynamic response of coatings. The topography of liquid crystal elastomers is sensitive to stimuli such as temperature, ultraviolet irradiation, and humidity. The applicability of the patterned approach to produce dynamic coatings was expanded from nematic elastomers to their smectic counterparts. The project combined a battery of imaging techniques to unveil the dynamic properties of the coatings, ranging from the state-of-the-art dynamic holographic microscopy to fluorescent confocal polarizing microscopy and polscope microscopy. The research uncovered potential applications of dynamic elastomer coatings, such as control placement of colloidal particles, engineering of living tissues with alignment patterns of cells that follow the orientational order of elastomer coatings. The approach developed in the project can be used to design programmable dynamic coatings with functionalities that mimic biological tissues such as skin.

36 MATERIALS SCIENCE↗

3D-Printed Repeating Re-Entrant Topography to Achieve On-Demand Wettability and Separation

While it is difficult and expensive to fabricate a complicated surface structure via conventional techniques, three-dimensional (3D) printing serves as a time-efficient and cost-efficient alternative. In the current study, a novel repeating re-entrant topography is fabricated by two-photon polymerization 3D printing. The experimental results show that the repeating re-entrant surface enhances the desired on-demand surface wettability. Furthermore, the 3D-printed membranes with the repeating re-entrant structures enable the efficient on-demand separation of liquid mixtures with high flux, which is critical for the wastewater treatment in the chemical industry.

36 MATERIALS SCIENCE↗

Tectonic and climatic significance of a late Eocene low-relief, high-level geomorphic surface, Colorado

New paleobotanical data suggest that in the late Eocene the erosion surface which capped the Front Range, Colorado was 2.2-2.3 km in elevation, which is similar to the 2.5-km present elevation of surface remnants. This estimated elevation casts doubt on the conventional belief that the low-relief geomorphic surface was formed by lateral planation of streams to a base level not much higher than sea level and that the present deeply incised canyons must represent Neogene uplift of Colorado. Description of the surface, calculations of sediment volume, and isostatic balance and fluvial landsculpting models demonstrate that while the high elevation of the erosion surface was due to tectonic forces, its smoothness was mostly a result of climatic factors. A sediment balance calculated for the Front Range suggests that from 2 to 4 km of material were eroded by the late Eocene, consistent with fission track ages. This amount of erosion would remove a significant portionof the 7 km of Laramide upper crustal thickening. Isostatic modeling implies that the 2.2-3.3 km elevation was most likely created by lower crustal thickening during the Laramide. A numerical model of fluvial erosion and deposition suggests a way that a late Eocene surface could have formed at this high elevation without incision. A humid climate with a preponderance of small storm events will diffusively smooth topography and is a possible mechanism for formation oflow-relief, high-level surfaces. Paleoclimate models suggest a lack of large strom events in the late Eocene because of cool sea surface temperatures in the equatorial region. Return to a drier but stormier climate post-Eocene could have caused the incision of the surface by young canyons. By this interpretation, regional erosion surfaces may represent regional climatic rather than tectonic conditions.

Gregory, Kathryn M.↗

Deformation, Ecosystem Structure, and Dynamics of Ice (DESDynI)

The National Research Council Earth Science Decadal Survey, Earth Science Applications from Space, recommends that DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice), an integrated L-band InSAR and multibeam Lidar mission, launch in the 2010- 2013 timeframe. The mission will measure surface deformation for solid Earth and cryosphere objectives and vegetation structure for understanding the carbon cycle. InSAR has been used to study surface deformation of the solid Earth and cryosphere and more recently vegetation structure for estimates of biomass and ecosystem function. Lidar directly measures topography and vegetation structure and is used to estimate biomass and detect changes in surface elevation. The goal of DESDynI is to take advantage of the spatial continuity of InSAR and the precision and directness of Lidar. There are several issues related to the design of the DESDynI mission, including combining the two instruments into a single platform, optimizing the coverage and orbit for the two techniques, and carrying out the science modeling to define and maximize the scientific output of the mission.

Donnellan, Andrea↗

Bacterial biofilm shows persistent resistance to liquid wetting and gas penetration

Most of the world's bacteria exist in robust, sessile communities known as biofilms, ubiquitously adherent to environmental surfaces from ocean floors to human teeth and notoriously resistant to antimicrobial agents. We report the surprising observation that Bacillus subtilis biofilm colonies and pellicles are extremely nonwetting, greatly surpassing the repellency of Teflon toward water and lower surface tension liquids. The biofilm surface remains nonwetting against up to 80% ethanol as well as other organic solvents and commercial biocides across a large and clinically important concentration range. We show that this property limits the penetration of antimicrobial liquids into the biofilm, severely compromising their efficacy. To highlight the mechanisms of this phenomenon, we performed experiments with mutant biofilms lacking ECM components and with functionalized polymeric replicas of biofilm microstructure. We show that the nonwetting properties are a synergistic result of ECM composition, multiscale roughness, reentrant topography, and possibly yet other factors related to the dynamic nature of the biofilm surface. Finally, we report the impenetrability of the biofilm surface by gases, implying defense capability against vapor-phase antimicrobials as well. These remarkable properties of B. subtilis biofilm, which may have evolved as a protection mechanism against native environmental threats, provide a new direction in both antimicrobial research and bioinspired liquid-repellent surface paradigms.

59 BASIC BIOLOGICAL SCIENCES↗

Analysis of Apollo 8 Photography and Visual Observations

Apollo 8 was launched from Cape Kennedy, Fla., at 7 :50 a.m., e.s.t., on December 21, 1968. Two hours 50 minutes later, translunar injection was performed; and astronauts Col. Frank Borman, the commander; Capt. James A. Lovell, Jr., the command module pilot; and Maj. (now Lt. Col.) William A. Anders, the lunar module pilot, were on their way to the Moon. The spacecraft was placed in an elliptical lunar orbit at 69 hours 8 minutes after liftoff. After flying two elliptical orbits of 168.5 by 60 nautical miles with an inclination of 12° to the Equator, the spacecraft was placed in a nearly circular orbit of 59.7 by 60.7 nautical miles, in which it remained for eight orbits. At 89 hours 19 minutes, trans earth injection was performed from behind the Moon. A nearly flawless mission was completed on the morning of December 27 when splashdown occurred in the Pacific Ocean after a total elapsed time of 147 hours. Lt. Gen. Sam C. Phillips, the Director of the Apollo Program, announced that such a mission was being considered at a press conference on August 19, 1968. Formal announcement that NASA was preparing Apollo 8 for an orbital flight around the Moon was released to the press on November 12, 1968. The primary purpose of this mission was to further progress toward the goal of landing men on the Moon by gaining operational experience and testing the Apolio systems. However, a great effort was also made to accomplish worthwhile scientific tasks with photography and visual observations by the astronauts. In planning the scientific tasks to be attempted on this mission, it was obvious that one of the prime tasks should be photography of the lunar surface. Such photography would furnish valuable information on the following : 1. Approach topography and landmarks for the early Apollo landings 2. The scientific merit and the roughness of areas for possible follow-on Apollo landings 3. The broad structure and characteristics of the lunar surface During the orbital part of the mission, a major portion of the lunar far side would be in sunlight. Although almost all of the far side of the Moon has been photographed by the automated Lunar Orbiter spacecraft, the photography generally was made with the spacecraft relatively far from the Moon, limiting the Lunar Orbiter photographs to an average resolution of approximately 100 meters. Thus, Apollo photographs of the far side would have much better resolution than existing pictures. Finally, it was recognized that contamination, both as it relates to window fogging (which did occur) and to contamination clouds around t he spacecraft, should be studied for both scientific and operational interests.

Richard J. Allenby↗

The Teton fault, Wyoming: Topographic signature, neotectonics, and mechanisms of deformation

We integrated geophysical and geological methods to evalute the structural evolution of the active Teton normal fault, Wyoming, and its role in the development of the dramatic topography of Teton Range and Jackson Hole. Comparison of variations in surface offsets with the topographic expression of the Teton range crest and drainage divide, and the overall structure of the range, suggests that the effects ofpostglacial faulting cannot be discriminated from the influence of pre-extensional structures and differential; erosion on the footwall topography. In contrast, the effects of multiple scarp-forming normal faulting earthquakes are expressed by the anomalous drainage pattern and westward tilt of the hanging wall, Jackson Hole, toward the Teton fault. Kinematic boundary element fault models suggest that the westward tilt of the valley floor is the product of 110-125 m of displacement on a 45 deg-75 deg E dipping Teton fault in the past 25,000-75,000 years. Comparisons with historic normal faulting earthquake displacements imply that this range of displacement corresponds to 10-50, M greater than 7 scarp-forming earthquakes. A total throw of 2.5 to 3.5 km across the Teton fault is suggested by inverse ray-tracing and forward gravity models. These models also suggest that Laramide age structures have been offset across the Teton fault and obscure its geophysical signature but also continue to influence the structural and topographic expression of the footwall and hanging wall blocks. Paleomagnetic analyses of the approximately 2.0 Ma Huckelberry Ridge Tuff suggest that the overall westward tilt of the Teton Range is a result ofabout 10 deg of west side down tilt across the Teton fault since tuff emplacement. This suggests that much if not all of the throw across the Teton fault has accumulated in the past 2 m.y. Complex demagnetization and rock magnetic behavior and local emplacement of the Huckleberry Ridge Tuff on preexisting topogrpahy preclude determination of the amount or variations in throw along strike of the Teton fault from the paleomagnetic data.

Byrd, John O. D.↗

Dust-dynamic feedbacks in the Martian atmosphere: Surface dust lifting

Numerical models have been developed to study surface dust lifting in the Martian atmosphere. The present model is comprised of interactively coupled 3-D dynamical and aerosol transport/microphysical models. The nature of possible feedbacks between surface dust lifting and the amplification/damping of near-surface wind and thermal fields and their implications for additional lifting is investigated. These studies have examined large scale Martian topography for its impact upon the ability of the atmospheric circulation to lift dust from the surface, and the particular component(s) responsible for the lifting (e.g. overturning circulation, thermal tides, baroclinic waves). Analogous experiments in which the lifted dust is radiatively inactive (passive tracer) have been conducted to act as a control against which feedbacks are defined.

Murphy, James R.↗

The subtidal response of sea level to atmospheric forcing in the Carolina Capes

The subtidal frequency response of sea level to atmospheric forcing along the coastal region between Cape Hatteras and Charleston is investigated for a four-month period: 1 September-31 December, 1974. It is found that low-frequency sea level fluctuations are preferentially forced by wind stress components which are aligned with the local topography. Also, a localized, one-dimensional model of sea surface response to a clockwise rotating wind for the Charleston coastal regime is developed. The phase spectrum of the alongshore wind component versus sea level as predicted by the model is shown to compare favorably to that derived from actual observations at Charleston, an open ocean coastal site. The model results and observations also suggest that wind-induced fluctuations of coastal sea level are trapped within 40 km of the coast by the combined effects of friction, Coriolis force and bottom topography. The outer shelf is dominated by fluctuations which are less related to wind stress and are attenuated rapidly in the shoreward direction. A reasonable estimate of bottom frictional coefficient, r = 0.05 cm/s, is also established.

Chao, S.-Y.↗

Fermi surface and van Hove singularity in the itinerant metamagnet Sr3Ru2O7

The low-energy electronic structure of the itinerant metamagnet Sr{sub 3}Ru{sub 2}O{sub 7} is investigated by angle-resolved photoemission and density-functional calculations. We find well-defined quasiparticle bands with resolution-limited linewidths and Fermi velocities up to an order of magnitude lower than in single layer Sr{sub 2}RuO{sub 4}. The complete topography, the cyclotron masses, and the orbital character of the Fermi surface are determined, in agreement with bulk sensitive de Haas-van Alphen measurements. An analysis of the d{sub xy} band dispersion reveals a complex density of states with van Hove singularities near the Fermi level, a situation which is favorable for magnetic instabilities.

43 PARTICLE ACCELERATORS↗

The Geoscience Laser Altimeter System (GLAS) for the ICESAT Mission

The Laser In space Technology Experiment, Shuttle Laser Altimeter and the Mars Observer Laser Altimeter have demonstrated accurate measurements of atmospheric backscatter and Surface heights from space. The recent MOLA measurements of the Mars surface have 40 cm vertical resolution and have reduced the global uncertainty in Mars topography from a few km to about 5 m. The Geoscience Laser Altimeter System (GLAS) is a next generation lidar for Earth orbit being developed as part of NASA's Icesat Mission. The GLAS design combines a 10 cm precision surface lidar with a sensitive dual wavelength cloud and aerosol lidar. GLAS will precisely measure the heights of the Earth's polar ice sheets, establish a grid of accurate height profiles of the Earth's land topography, and profile the vertical backscatter of clouds and aerosols on a global scale. GLAS is being developed to fly on a small dedicated spacecraft in a polar orbit with a 590 630 km altitude at inclination of 94 degrees. GLAS is scheduled to launch in the summer 2001 and to operate continuously for a minimum of 3 years with a goal of 5 years. The primary mission for GLAS is to measure the seasonal and annual changes in the heights of the Greenland and Antarctic ice sheets. GLAS will continuously measure the vertical distance from orbit to the Earth's surface with 1064 nm pulses from a ND:YAG laser at a 40 Hz rate. Each 5 nsec wide laser pulse is used to produce a single range measurement, and the laser spots have 66 m diameter and about 170 m center-center spacings. When over land GLAS will profile the heights of the topography and vegetation. The GLAS receiver uses a 1 m diameter telescope and a Si APD detector. The detector signal is sampled by an all digital receiver which records each surface echo waveform with I nsec resolution and a stored echo record lengths of either 200, 400, or 600 samples. Analysis of the echo waveforms within the instrument permits discrimination between cloud and surface echoes. Ground based echo analysis permits precise ranging, determining the roughness or slopes of the surface as well as the vertical distributions of vegetation illuminated by the laser. Accurate knowledge of the laser beam's pointing angle is needed to prevent height biases when over sloped surfaces. For surfaces with 2 deg. slopes, knowledge of pointing angle of the beam's centroid to about 8 urad is needed to achieve 10 cm height accuracy. GLAS uses a stellar reference system (SRS) to determine the pointing angle of each laser firing relative to inertial space. The SRS uses a high precision star camera oriented toward local zenith and a gyroscope to determine the inertial orientation of the SRS optical bench. The far field pattern of each laser is measured pulse relative to the star camera with a laser reference system (LRS). Optically measuring each laser far field pattern relative to the orientation of the star camera and gyroscope permits the precise pointing angle of each laser pulse to be determined. GLAS will also determine the vertical distributions of clouds and aerosols by measuring the vertical profile of laser energy backscattered by the atmosphere at both 1064 and 532 nm. The 1064 nm measurements use the Si APD detector and profile the height and vertical structure of thicker clouds. The measurements at 532 nm use new highly sensitive photon counting, detectors, and measure the height distributions of very thin Clouds and aerosol layers. With averaging these can be used to determine the height of the planetary boundary layer. The instrument design and expected performance will be discussed.

Abshire, James B.↗

Mars lower atmosphere - Some new implications.

Based on occultation data from the Mariner spacecraft, there are some preliminary indications of an apparent systematically higher surface pressure on the night side of Mars than on the day side. If confirmed by additional data currently becoming available, this apparent surface pressure difference could be attributed to several causes, including topography effects as has been assumed previously, an actual increase of pressure on the night side caused by diurnal effects, an apparent increase on the night side due to some mechanisms such as a dust layer, or an apparent lower pressure on the day side due to the existence of a low-lying electron layer. By calculating the effect of a low-lying electron layer on the combined neutral atmosphere and electron layer refractivity profile, it is found that the day side and night side surface pressures would be in agreement if a layer with maximum density of about 80,000 electrons per cu cm below 15 km altitude were present on the day side.

Michael, W. H., Jr.↗

Fermi Surface and Van Hove Singularities in the Itinerant Metamagnet Sr(3)Ru(2)O(7)

The low-energy electronic structure of the itinerant metamagnet Sr{sub 3}Ru{sub 2}O{sub 7} is investigated by angle resolved photoemission and density functional calculations. We find well-defined quasiparticle bands with resolution limited line widths and Fermi velocities up to an order of magnitude lower than in single layer Sr{sub 2}RuO{sub 4}. The complete topography, the cyclotron masses and the orbital character of the Fermi surface are determined, in agreement with bulk sensitive de Haas - van Alphen measurements. An analysis of the dxy band dispersion reveals a complex density of states with van Hove singularities (vHs) near the Fermi level; a situation which is favorable for magnetic instabilities.

43 PARTICLE ACCELERATORS↗

A multi-criteria land suitability assessment of field allocation decisions for switchgrass

With the goal of evaluating biomass resource availability in certain regions in the United States, the Department of Energy, Department of Agriculture, Environmental Protection Agency, national laboratories, and Forest Service research laboratories, together with academic and industry collaborators, performed a resource analysis study, 2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy, Volume 1: Economic Availability of Feedstocks, using POLYSYS model to estimate biomass potential. The study provided county- and state-level biomass potential projections, with biomass feedstock production estimates and suitability assessment of lands acreage likely to transition to energy crops. For this analysis, we estimate biomass supply by year 2028, more specifically, lands acreage transition to switchgrass in the Midwest of the United States, across 50 counties in 3 states (Nebraska, Kansas, and Colorado). We propose a multi-criteria site suitability framework, to determine the potential acreage and production for switchgrass, at the field level. Site selection criteria span agronomic and ecosystem services such as previous land cover, crop rotation, soil water holding capacity, crop productivity, field efficiency, topography, soil organic matter, soil leaching propensity, distance to surface water bodies, and soil erosivity. Efficient agricultural field selection for dedicated energy crops field allocation is critical to evaluate biomass resource availability, and it is our position that estimation at the field level would provide a more accurate and useful estimation to support an emerging bioeconomy. Using field suitability scores and county-level assessments, we model land allocation decision for energy crop in the future, estimating the spatial distribution of dynamics of energy crop adoption with priority to fields scoring the highest. Additionally, compared with POLYSYS results from the report mentioned above, our method shows good performance overall, with about 2% and 1.2% of difference in switchgrass acreage allocation and crop production, respectively.

54 ENVIRONMENTAL SCIENCES↗

Pre-Shot Simulations of Far-Field Ground Motions for the Source Physics Experiment (SPE) Explosions at the Climax Stock, Nevada National Security Site

The Source Physics Experiment (SPE) will involve a series of explosions in various geologic and emplacement conditions to validate numerical simulation methods to predict behavior of seismic wave excitation and propagation for nuclear test monitoring. The first SPE's currently underway involve explosions in the Climax Stock (granitic geology) at the Nevada National Security Site (NNSS). Detailed geologic data and published material properties for the major lithologic units of the NNSS and surrounding region were used to build three-dimensional models for seismic wave propagation simulations. The geologic structure near the SPE shot point is quite varied including granitic, carbonate, tuff and alluvium lithologies. We performed preliminary ground motion simulations for a near-source domain covering 8 km x 8 km at the surface centered on the shot point to investigate various source and propagation effects using WPP, LLNL's anelastic seismic wave finite difference code. Simulations indicate that variations in wave propagation properties of the sub-surface will generate strongly path-dependent response once the energy has left the relatively small granitic geology of the near-surface Climax Stock near the SPE shot point. Rough topography to the north and west of SPE shot point causes additional complexity in the signals including energy on the transverse components. Waves propagate much faster through the granitic and carbonate formations and slower through the tuff and alluvium. Synthetic seismograms for a pure explosion source in a 3D geologic structure show large amplitudes on transverse component. For paths to the south sampling the granite, tuff and alluvium lithologies transverse component amplitudes are as high as 50% of that on the vertical and radial components.

58 GEOSCIENCES↗

Orbital observations of the lunar highlands on Apollo 16 and their interpretation

From orbital altitudes, the lunar highlands display the same surface characteristics on both the far and near sides. Rugged terra and plains forming materials all appear as if dusted with a uniform mantle. No stratigraphy or evidence of layering are seen in highland craters, with the possible exception of South Ray Crater in the Descartes landing site area. Among the discussed small scale features of the lunar highlands are: fine lineaments, that appear to be real rather than artifacts of lighting, on both horizontal and inclined surfaces; ridge-like scarps that cut across highland topography; and benches that are believed to be high lava marks rather than talus accumulates.

Mattingly, T. K.↗

Radio occultation exploration of Mars

The present work summarizes the principal results of the radio occultation experiments carried out to date for Mars. The early measurements, made at the time of the Martian dust storm of 1971, showed greatly reduced temperature gradients in the daytime troposphere, indicating the heating effect of the dust. The temperature gradients that were measured later when the atmosphere was apparently free of dust, were still much lower than expected under conditions of radiative-convective balance, indicating that dynamics may play a large part in determining the temperature structure of the Martian troposphere. The surface atmospheric pressure was observed to vary widely with topography ranging from about 1 mb at the summit of the Middle Spot volcano (Pavonis Mons) to over 10 mb in the North circumpolar region. The radius of the planet was measured with accuracies ranging from about 0.25 to about 2.1 km over latitudes ranging from 86 to -80 deg. These measurements have shown that Mars has pronounced equatorial and north-south asymmetries, which make it difficult to represent its shape by a simple triaxial figure. The daytime ionosphere measurements indicated that the main ionization peak was similar in behavior to a terrestrial F1 layer and is probably produced by photoionization of carbon dioxide by solar extreme ultraviolet.

Kliore, A. J.↗