Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Doped GaN nanowires on diamond: Structural properties and charge carrier distribution

In this work, we present a detailed study on GaN nanowire doping, which is vital for device fabrication. The nanowires (NWs) are grown by means of molecular beam epitaxy on diamond (111) substrates. Dopant atoms are found to facilitate nucleation, thus an increasing NW density is observed for increasing dopant fluxes. While maintaining nanowire morphology, we demonstrate the incorporation of Si and Mg up to concentrations of 9× 10{sup 20}cm{sup −3} and 1 × 10{sup 20}cm{sup −3}, respectively. The dopant concentration in the nanowire cores is determined by the thermodynamic solubility limit, whereas excess dopants are found to segregate to the nanowire surface. The strain state of the NWs is investigated by X-ray diffraction, which confirms a negligible strain compared to planar thin films. Doping-related emissions are identified in low-temperature photoluminescence spectroscopy and the temperature quenching yields ionization energies of Si donors and Mg acceptors of 17 meV and 167 meV, respectively. At room temperature, luminescence and absorption spectra are found to coincide and the sub-band gap absorption is suppressed in n-type NWs. The charge carrier distribution in doped GaN nanowires is simulated under consideration of surface states at the non-polar side facets. For doping concentrations below 10{sup 17}cm{sup −3}, the nanowires are depleted of charge carriers, whereas they become highly conductive above 10{sup 19}cm{sup −3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-Scale Visualization of Quasiparticle Interference on a Type-II Weyl Semimetal Surface

Here we combine quasiparticle interference simulation (theory) and atomic resolution scanning tunneling spectromicroscopy (experiment) to visualize the interference patterns on a type-II Weyl semimetal Mo x W 1-x Te 2 for the first time. Our simulation based on first-principles band topology theoretically reveals the surface electron scattering behavior. We identify the topological Fermi arc states and reveal the scattering properties of the surface states in Mo 0.66 W 0.34 Te 2 . In addition, our result reveals an experimental signature of the topology via the interconnectivity of bulk and surface states, which is essential for understanding the unusual nature of this material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface Slope Metrology on Deformable Soft X-ray Mirrors

We report on the current state of surface slope metrology on deformable mirrors for soft x-rays at the Advanced Light Source (ALS). While we are developing techniques for in situ at-wavelength tuning, we are refining methods of ex situ visible-light optical metrology to achieve sub-100-nrad accuracy. This paper reports on laboratory studies, measurements and tuning of a deformable test-KB mirror prior to its use. The test mirror was bent to a much different optical configuration than its original design, achieving a 0.38 micro-radian residual slope error. Modeling shows that in some cases, by including the image conjugate distance as an additional free parameter in the alignment, along with the two force couples, fourth-order tangential shape errors (the so-called bird shape) can be reduced or eliminated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface Slope Metrology on Deformable Soft X-ray Mirrors

We report on the current state of surface slope metrology on deformable mirrors for soft x-rays at the Advanced Light Source (ALS). While we are developing techniques for in situ at-wavelength tuning, we are refining methods of ex situvisible-light optical metrology to achieve sub-100-nrad accuracy. This paper reports on laboratory studies, measurements and tuning of a deformable test-KB mirror prior to its use. The test mirror was bent to a much different optical configuration than its original design, achieving a 0.38 micro-radian residual slope error. Modeling shows that in some cases, by including the image conjugate distance as an additional free parameter in the alignment, along with the two force couples, fourth-order tangential shape errors (the so-called bird shape) can be reduced or eliminated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Surface Slope Metrology on Deformable Soft X-ray Mirrors

We report on the current state of surface slope metrology on deformable mirrors for soft x-rays at the Advanced Light Source (ALS). While we are developing techniques for in situ at-wavelength tuning, we are refining methods of ex situ visible-light optical metrology to achieve sub-100-nrad accuracy. This paper reports on laboratory studies, measurements and tuning of a deformable test-KB mirror prior to its use. The test mirror was bent to a much different optical configuration than its original design, achieving a 0.38 micro-radian residual slope error. Modeling shows that in some cases, by including the image conjugate distance as an additional free parameter in the alignment, along with the two force couples, fourth-order tangential shape errors (the so-called bird shape) can be reduced or eliminated.

47 OTHER INSTRUMENTATION↗

Trajectory surface-hopping study of methane photodissociation dynamics

We use the fewest switches nonadiabatic trajectory surface hopping approach to study the photodissociation of methane on its lowest singlet excited state potential surface (1 {sup 1}T{sub 2}) at 122 nm, with emphasis on product state branching and energy partitioning. The trajectories and couplings are based on CASSCF(8,9) calculations with an aug-cc-pvdz basis set. We demonstrate that nonadiabatic dynamics is important to describe the dissociation processes. We find that CH{sub 3}(X-tilde{sup 2}A{sub 2}{sup ''})+H and CH{sub 2}(a-tilde{sup 1}A{sub 1})+H{sub 2} are the major dissociation channels, as have been observed experimentally. CH{sub 3}+H is mostly formed by direct dissociation that is accompanied by hopping to the ground state. CH{sub 2}+H{sub 2} can either be formed by hopping to the ground state to give CH{sub 2}(a-tilde{sup 1}A{sub 1})+H{sub 2} or by adiabatic dissociation to CH{sub 2}(b-tilde{sup 1}B{sub 1})+H{sub 2}. In the latter case, the CH{sub 2}(b-tilde{sup 1}B{sub 1}) can then undergo internal conversion to the ground singlet state by Renner-Teller induced hopping. Less important dissociation mechanisms lead to CH{sub 2}+H+H and to CH+H{sub 2}+H. Intersystem crossing effects, which are not included, do not seem essential to describe the experimentally observed branching behavior. About 5% of trajectories involve a roaming atom mechanism which can eventually lead to formation of products in any of the dissociation channels. Branching fractions to give H and H{sub 2} are in good agreement with experiment, and the H atom translational energy distribution shows bimodal character which also matches observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural stability and electronic properties of low-index surfaces of SnS

Thin film photovoltaic cells are increasingly important for cost-effective solar energy harvesting. Layered SnS is a promising absorber material due to its high optical absorption in the visible and good doping characteristics. We use first-principles calculations based on density functional theory to study structures of low-index surfaces of SnS using stoichiometric and oxygen-containing structural models, in order to elucidate their possible effect on the efficiency of the photovoltaic device. We find that the surface energy is minimized for the surface with orientation parallel to the layer stacking direction. Compared to stoichiometric surfaces, the oxygen-containing surfaces exhibit fewer electronic states near the band gap. This reduction of near-gap surface states by oxygen should reduce recombination losses at grain boundaries and interfaces of the SnS absorber, and should be beneficial to the efficiency of the solar cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Drastically different restructuring of airborne and surface-anchored soot aggregates

Combustion soot particles are fractal aggregates of hydrophobic spherules. Mixing of soot particles with other chemicals during atmospheric processing may partially offset their hydrophobicity, promoting water uptake and structural compaction. Here, we investigated morphological changes in fractal soot particles coated by sulfuric acid and then humidified, both in airborne and surface-bound states. Airborne soot was probed by tandem differential mobility analysis. Surface-bound soot was studied in a controlled microenvironment of a closed cell, using environmental transmission electron microscopy. After humidification, the airborne particles became fully compact, but the deposited particles showed only minor morphological changes despite significant water uptake. Although minor, those changes were detected during both water condensation and evaporation, indicating that condensation-evaporation cycles play an important role in atmospheric soot compaction. Lesser restructuring of deposited aggregates was caused by surface anchoring and coating loss, making anchoring an indispensable tool for preserving morphology of aggregates against changing experimental environment.

54 ENVIRONMENTAL SCIENCES↗

Effect of Surface Engineering on LaAlO3/SrTiO3 Interfaces

Carrier properties at the LaAlO3/SrTiO3 interfaces are highly sensitive to potential profile generated by LaAlO3 top surface termination. In ambient environment, the uncontrolled surface exposure may introduce randomly distributed charge or polarization and therefore significantly impact interfacial transport by disorder related effect. As evidence, local fluctuation in carrier density and mobility has been observed in nanostructures defined by atomic force microscope (AFM) lithography. Here we report controlled modification of LaAlO3 surface by solvent deposition. Surface desorption is first carried out by sample annealing in O2 environment. The annealed LaAlO3 surfaces are later coated with various solvents of controlled thicknesses by pulsed laser deposition using frozen targets. Coated surfaces are analyzed by pulsed force and frictional force microscopy. AFM lithography is also carried out to locally alter the surface charge state and modulate the potential disorder level. Effect of different controlled surface coatings on interface are studied by magneto-transport measurement

Adhikari, Sanjay↗

Vibrational distribution of nitrogen molecules in the C{sup 3}{Pi}{sub u} state in a near-surface microwave plasma in nitrogen at pressures of 1-5 Torr

The radiation of the second positive nitrogen system has been used to study the spatial dependence of the vibrational distribution of nitrogen molecules in the C{sup 3}{Pi}{sub u} state in the near-surface plasma layer of an electrode microwave discharge in nitrogen at pressures of 1-5 Torr. It has been shown that the vibrational distribution changes at a scale of 100 {mu}m. It has been concluded that this state is populated owing to the electron impact from the ground state. The possibility of using the local approximation for the electron energy distribution function to explain the experimental results has been analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of odd-parity superconductivity in UTe 2

Symmetry properties of the order parameter are among the most fundamental characteristics of a superconductor. UTe 2 , which was found to feature an exceedingly large upper critical field and striking reentrant behavior at low temperatures, is widely believed to possess a spin-triplet pairing symmetry. However, unambiguous evidence for such a pairing symmetry is still lacking, especially at zero and low magnetic fields. The presence of an inversion crystalline symmetry in UTe 2 requires that, if it is indeed a spin-triplet superconductor, the order parameter must be of odd parity. We report here phase-sensitive measurements of the symmetry of the orbital part of the order parameter using the Josephson effect. The selection rule in the orientation dependence of the Josephson coupling between In, an s -wave superconductor, and UTe 2 suggests strongly that UTe 2 possesses the odd-parity pairing state of B 1 u symmetry near zero magnetic field, making it a spin-triplet superconductor. We also report the apparent formation of Andreev surface bound states on the (1−10) surface of UTe 2 .

Li, Zixuan (ORCID:0009000572025666)↗

In Situ Analysis of Manganese Antimonate Oxygen Evolution Electrocatalysts via Ambient Pressure X-ray Photoelectron Spectroscopy

Here, manganese antimonates are earth-abundant potential alternatives to precious metal catalysts for the oxygen-evolution reaction (OER). Herein, X-ray photoelectron spectroscopy was used to determine the surface chemistry of a manganese antimonate catalyst for the OER under ultra-high vacuum, ambient pressure, and in situ reaction conditions. Ex situ and in situ analysis revealed the oxidation states of surficial species as a function of material stoichiometry, water content, and applied potential. In situ XPS measurements in 1.0 M KOH(aq) indicated that relative to the rest state, the surface Mn(III) partially oxidized while effecting the OER, with approximately 15% of the Mn signal attributable to Mn(IV) and the remainder attributable to Mn(III).

36 MATERIALS SCIENCE↗

Effect of the variation rate of an external magnetic field on the high-frequency response of surface superconductivity in a critical state

The effect of the magnetic field variation rate on the high-frequency absorption of surface superconductivity of cylindrical samples has been studied. It has been shown that the magnitude of additional highfrequency absorption attributed to Kulik vortices does not demonstrate saturation and other critical changes up to a magnetic field variation rate of 350 kOe/s, which indicates that the velocity of motion of Kulik vortices is higher than that of Abrikosov vortices. The effect of the normal core of the sample on the dynamics of a magnetic flux has been discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Supported Organochromium Ethylene Oligomerization Enabled by Surface Lithiation

Here, in this work, supported organochromium ethylene polymerization catalysts have been tuned to mediate ethylene oligomerization via surface lithiation, which provides a generalizable protocol to control stereoelectronics and redox states of surface organometallic active sites. The homoleptic chromium(IV) alkyl complex Cr(CH 2 SiMe 3 ) 4 was grafted on high-surface-area anatase titania (TiO 2 ) nanoparticles as well as on silica to produce Cr/TiO 2 and Cr/SiO 2 , respectively. Treatment of these materials with excess n-butyllithium led to the reduced chromium complexes Cr/Li x TiO 2 and Cr/Li/SiO 2 , each of which still retains one hydrocarbyl ligand on chromium. A set of heterogeneous complexes were studied by electron paramagnetic resonance and X-ray absorption spectroscopy, which indicate a reduction in the oxidation state of the major chromium species to Cr II upon lithiation. Cr/Li x TiO 2 converts ethylene to hexenes with a high selectivity (>80%), which was persistent over 10 days at 80 °C, achieving >950 turnovers. The exclusive formation of C 4 and C 6 olefins, preferring the trimerization product, without a statistical (Flory–Schulz) distribution is characteristic of the oxidative cyclization oligomerization mechanism rather than the traditional Cossee–Arlman mechanism, whereas Cr/Li/SiO 2 produced a mixture of trimerization and polymerization products, suggesting site heterogeneity in the silica-based material. On the other hand, the unreduced chromium(IV) materials as well as low lithium-containing Cr/Li x TiO 2 (x < 0.16) exclusively produced ultrahigh molecular weight polyethylene, determined by differential scanning calorimetry and gel permeation chromatography analysis, likely formed via a linear-insertion mechanism, with a crossover from the polymerization to oligomerization regime observed at ~16% Li intercalation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface modification using low energy ground state ion beams

A method of effecting modifications at the surfaces of materials using low energy ion beams of known quantum state, purity, flux, and energy is presented. The ion beam is obtained by bombarding ion-generating molecules with electrons which are also at low energy. The electrons used to bombard the ion generating molecules are separated from the ions thus obtained and the ion beam is directed at the material surface to be modified. Depending on the type of ion generating molecules used, different ions can be obtained for different types of surface modifications such as oxidation and diamond film formation. One area of application is in the manufacture of semiconductor devices from semiconductor wafers.

Chutjian, Ara↗

Interplay of charge density wave states and strain at the surface of CeTe 2

in this work we use scanning tunneling microscopy (STM) to study charge density wave (CDW) states in the rare-earth ditelluride, CeTe 2 . Our STM measurements surprisingly detect a unidirectional CDW with q ~ 0.28 a * , which differs from previous experimental and first-principles studies of the rare-earth ditellurides, and which is very close to what is found in experimental measurements of the related rare-earth tritellurides. Furthermore, in the vicinity of an extended subsurface defect, we find spatially-separated as well as spatially-coexisting unidirectional CDWs at the surface of CeTe 2 . We quantify the nanoscale strain and its variations induced by this defect, and establish a correlation between local lattice strain and the locally-established CDW states; this suggests that lattice strain plays an important role in determining the specific characteristics of the established CDW state. Our measurements probe the fundamental properties of a weakly-bound two-dimensional Te sheet, which experimental and theoretical work has previously established as the fundamental component driving much of the essential physics in both the rare-earth di- and tritelluride compounds.

36 MATERIALS SCIENCE↗

Measuring pH Changes Inside a Bipolar Membrane Junction

Here, the local pH environment within bipolar membrane (BPM) junctions is complex and not well understood, yet it is important to control for advancing the performance of BPM-based electrochemical systems. We report a voltammetric strategy using an ultrathin Ni mesh pH probe to spatially resolve pH changes in the BPM junction during model BPM electrolyzer operation. Under reverse bias, we observe depletion of OH – at the anion-exchange layer (AEL) interface, with a degree diminishing with increasing distance from the AEL. These gradients correlate with current-dependent water dissociation (WD) and are modulated by the electric field and the surface charge state of the catalyst. By correlating spatial pH profiles with the surface-charging behavior of WD catalysts, we explore a mechanism of catalyst-mediated H + and OH – transfer facilitated by hydrogen-bonding networks. These findings highlight the role of local chemistry and electrostatics in BPM performance and offer new methods to probe and engineer catalytic junctions in electrochemical energy devices.

Hou, Shujin [University of California, Berkeley, C↗

Synchrotron characterization of functional tin dioxide nanowires

Wire-like crystals of tin dioxide were synthesized by a gas-transport technique. The wires, of mainly nanometric diameters, were characterized by spectroscopy and microscopy techniques with the use of highly brilliant and intense synchrotron radiation. We studied the influence of the surface chemical state and the oxygen vacancies on the atomic and electronic structure of the nanowires. The surface of the nanowires is covered by a few nanometers of tin suboxides. The lack of oxygen over the surface layers leads to specific sub-zone formation in a gap, as shown by synchrotron studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗