Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shape analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

A Methodology to Assess the Capability of Engine Designs to Meet Closed-loop Performance and Operability Requirements

Designing a closed-loop controller for an engine requires balancing trade-offs between performance and operability of the system. One such trade-off is the relationship between the 95% response time and minimum high-pressure compressor (HPC) surge margin (SM) attained during acceleration from idle to takeoff power. Assuming a controller has been designed to meet some specification on response time and minimum HPC SM for a mid-life (nominal) engine, there is no guarantee that these limits will not be violated as the engine ages, particularly as it reaches the end of its life. A characterization for the uncertainty in this closed-loop system due to aging is proposed that defines elliptical boundaries to estimate worst-case performance levels for a given control design point. The results of this characterization can be used to identify limiting design points that bound the possible con- troller designs yielding transient results that do not exceed specified limits in response time or minimum HPC SM. This characterization involves performing Monte Carlo simulation of the closed-loop system with controller constructed for a set of trial design points and developing curve fits to describe the size and orientation of each ellipse; a binary search procedure is then employed that uses these fits to identify the limiting design point. The method is demonstrated through application to a generic turbofan engine model in closed- loop with a simplified controller; it is found that the limit for which each controller was designed was exceeded by less than 4.76%. Extension of the characterization to another trade-off, that between the maximum high-pressure turbine (HPT) entrance temperature and minimum HPC SM, showed even better results: the maximum HPT temperature was estimated within 0.76%. Because of the accuracy in this estimation, this suggests another limit that may be taken into consideration during design and analysis. It also demonstrates the extension of the characterization to other attributes that contribute to the performance or operability of the engine. Metrics are proposed that, together, provide information on the shape of the trade-off between response time and minimum HPC SM, and how much each varies throughout the life cycle, at the limiting design points. These metrics also facilitate comparison of the expected transient behavior for multiple engine models.

engine control↗
NASA NTRS1987

Thermal-stress-free fasteners for joining orthotropic materials

Hot structures fabricated from orthotropic materials are an attractive design option for future high speed vehicles. Joining subassemblies of these materials with standard cylindrical fasteners can lead to loose joints or highly stressed joints due to thermal stress. A method has been developed to eliminate thermal stresses and maintain a tight joint by shaping the fastener and mating hole. This method allows both materials (fastener and structure), with different coefficients of thermal expansion (CTEs) in each of the three material directions, to expand freely with temperature yet remain in contact. For the assumptions made in the analysis, the joint will remain snug, yet free of thermal stress at any temperature. Finite element analysis was used to verify several thermal-stress-free fasteners and to show that conical fasteners, which are thermal-stress-free for isotropic materials, can reduce thermal stresses for transversely isotropic materials compared to a cylindrical fastener. Equations for thermal-stress-free shapes are presented and typical fastener shapes are shown.

Blosser, M. L.↗
NASA NTRS1971

Delta modulation

The conclusions of the design research of the song adaptive delta modulator are presented for source encoding voice signals. The variation of output SNR vs input signal power/when 8, 9, and 10 bit internal arithmetic is employed. Voice intelligibility tapes to test the 10-bit system are used. An analysis of a delta modulator is also presented designed to minimize the in-band rms error. This is accomplished by frequency shaping the error signal in the modulator prior to hard limiting. The result is a significant increase in the output SNR measured after low pass filtering.

Schilling, D. L.↗
NASA NTRS1972

ERTS-1 imagery of the Lake Champlain region: A first look

The author has identified the following significant results. First-look analysis of RBV imagery of Lake Champlain and adjacent areas provided the following information on land and water resources: (1) location and shape of islands over 200 meters at narrowest part; (2) location of manmade structures at least 10 meters across; (3) location of shoreline; (4) identification of algal blooms and major turbidity boundary; (5) identification of lake bottom features in sandy, shallow areas; (6) identification of major lake shore wetland and floodplain wetlands; (7) location of major streams; (8) identification of ice marginal deposits of major proportions and former shorelines of Champlain Sea; (9) identification of wooded areas, open land, and built-up areas.

Lind, A. O.↗
NASA NTRS1973

Eigenvalue uncertainty in stressed structures.

A method is presented for calculating the statistics of the natural frequencies and mode shapes of vibration for a structure acted upon by an external static loading which results in the structure being stressed for eigenvalue analysis. The analytical tools presented apply to the probabilistic eigenvalue problem, and it is apparent that structural parameter uncertainty will significantly influence all aspects of the structure's response. The treatment of a sample problem serves the purpose of furthering understanding for the importance of considering structural parameters as random variables.

Hart, G. C.↗
NASA NTRS1973

Comparison of predicted and measured low-speed performance of two 51 centimeter-diameter inlets at incidence angle

Theoretical and experimental internal flow characteristics of two 51-cm-diameter inlets are compared. Theoretical flow characteristics along the inlet surface were obtained from an axisymmetric potential flow and boundary layer analysis. The experimental data were obtained from low-speed tests of a high-bypass-ratio turbofan engine simulator. Comparisons between calculated internal surface pressure distributions and experimental data are presented for a free-system velocity of 45 m/sec and for incidence angles from 0 deg to 50 deg. Analysis of boundary layer separation on the inlet lip at incidence angle is the major emphasis of this report. Theoretical boundary layer shape factors, skin friction coefficients, and velocity profiles in the boundary layer are presented, along with the location of the transition region. Theoretical and experimental separation locations are also discussed.

Albers, J. A.↗
NASA NTRS1976

Determination of strains in optical windows of a high-pressure chamber by holographic interferometry and finite element analysis

Holographic interferometry and finite element analysis have been applied to determine the strain in a large optical window installed in a high-pressure chamber. Two different shapes of windows were chosen, and the outside and inside surface strains of the windows were followed as a function of internal pressure by taking double exposed holograms at 69-bar intervals up to 483 bars. The results were compared with the values calculated by a standard finite element code with an assumption of no displacement at the load-bearing edge. The agreement between two results was found to be good for both cases.

Soga, N.↗
NASA NTRS1987

Evidence for glaciation in Elysium

Evidence for the existence of permafrost and the surface modification due to frost effects and the presence of ice on Mars dates from early observations. Later analysis of the Viking Orbiter imagery produced evidence suggesting the former presence of ice sheets that could have played a part in shaping the surface of Mars. Similarities were pointed out between a number of streamlined Martian channel features and similar streamlined landforms created by Antarctic ice sheet movement. A study of Viking Orbiter imagery of Granicus Valles and the surrounding terrain in Elysium has produced further evidence of glaciation on Mars. Volcanism has played an important role in developing the landscapes of the Elysium region. A possible explanation is that subsidence occurred during formation of the Martian moberg ridges due to the melting of ground ice near the eruption area while at a distance most of the ground ice in the permafrost is still present and the original elevation was preserved. Meltwater during and following eruptions might be suddenly released during subglacial volcanism into Granicus Valles in one case and into Hrad Valles in the other. Fluvial erosion thus could have played a role in shaping both.

Anderson, Duwayne M.↗
NASA NTRS1987

Estimation of blade airloads from rotor blade bending moments

A method is developed to estimate the blade normal airloads by using measured flap bending moments; that is, the rotor blade is used as a force balance. The blade's rotation is calculated in vacuum modes and the airloads are then expressed as an algebraic sum of the mode shapes, modal amplitudes, mass distribution, and frequency properties. The modal amplitudes are identified from the blade bending moments using the Strain Pattern Analysis Method. The application of the method is examined using simulated flap bending moment data that have been calculated for measured airloads for a full-scale rotor in a wind tunnel. The estimated airloads are compared with the wind tunnel measurements. The effects of the number of measurements, the number of modes, and errors in the measurements and the blade properties are examined, and the method is shown to be robust.

Bousman, William G.↗
NASA NTRS1988

Antenna pattern study

Prediction of antenna radiation patterns has long been an important function in the design of command, communication, and tracking systems for rocket vehicles and spacecraft. An acceptable degree of assurance that a radio link will provide the required quality of data or certainty of correct command execution must be acquired by some means if the system is to be certified as reliable. Two methods have been used to perform this function: (1) Theoretical analysis, based on the known properties of basic antenna element types and their behavior in the presence of conductive structures of simple shape, and (2) Measurement of the patterns on scale models of the spacecraft or rocket vehicle on which the antenna is located. Both of these methods are ordinarily employed in the antenna design process.

Harper, Warren↗
NASA NTRS1988

Equilibrium shape and location of a liquid drop acoustically positioned in a resonant rectangular chamber

The effect of a standing wave field in a rectangular chamber on the shape and location of an acoustically positioned drop or bubble is calculated. The sample deformation and equilibrium position are obtained from an analysis of the spherical harmonic projections of the total surface stress tensor. The method of calculation relies on the assumed condition that the sample is only slightly distorted from a spherical form. The equilibrium location of a levitated drop is combined with a formula introduced by Hasegawa (1979) to calcualte the ka dependence of the radiation force function. The present theory is valid for large as well as small ka values. Calculations in the small ka limit agree with previous theories and experimental results. Examples are presented for nonplane-wave modes as well as plane-wave rectangular modes.

Jackson, H. W.↗
NASA NTRS1989

Venus surface properties deduced from radar and radiometry

The brightness of surface features on side looking radar images of Venus is determined by many factors: the angles of incidence and reflection, polarization, surface geometry and composition, and so forth. The contribution from surface properties themselves can only be deduced by combining several types of measurement. For instance, without additional information, it is impossible to distinguish the effects of changes in surface roughness from those in dielectric constant. In common with the Moon and Mars, the surface of Venus appears to scatter radar waves in two ways: small-scale surface inhomogeneities, i.e., those smaller than the incident wavelength, depolarize and scatter the energy over a wide range of angles. The Pioneer Venus radar mapper experiment made three overlapping sets of measurements of the equatorial region of Venus from 15 deg S latitude to 45 deg N; the backscatter cross section at a range of incidence angles, the shape and intensity of radar echoes from the nadir, and the microwave brightness temperature of the surface. These techniques developed during the analysis of Pioneer Venus data will be used during the Magellan mission to extract measurements of surface slopes and dielectric constants over all areas covered by the SAR and altimeter antennae, with a resolution of about 10 km. A knowledge of the mechanisms that govern surface scattering will also be useful in the analysis of higher resolution side looking radar images, particularly in distinguishing the effects of changing roughness from those caused by a long range surface tilt or changing dielectric constant.

Ford, P. G.↗
NASA NTRS1989

Advances in fluid dynamics

Various papers on advances in fluid dynamics are presented. Individual topics addressed include: nonunique solutions of the Euler equations; numerical solution of the biharmonic equation using a spectral multigrid method; finite-volume shape and placement for efficiency, accuracy, and physics; NND schemes and their application to numerical simulation of complex plume flow problems; symbolic analysis and computational algorithm construction; and velocity and mass flux distribution measurements of spherical glass beads in air flow in a 90-deg vertical-to-horizontal bend. Also discussed are: hyperbolic solution adaptive mesh generation; progress and future directions in CFD; numerical simulation of shock focusing; microbubble formation and splitting in a turbulent boundary layer for turbulence reduction; numerical study of spherical Taylor-Couette flow, trajectories of vortex lines beneath a free surface or above a plane; and a mathematical model for response of the coronary circulation to high sustained gravitational force fields.

Ballhaus, W. F., Jr.↗
NASA NTRS1990

Martian crater counts on Elysium Mons

Without returned samples from the Martian surface, relative age chronologies and stratigraphic relationships provide the best information for determining the ages of geomorphic features and surface regions. Crater-size frequency distributions of six recently mapped geological units of Elysium Mons were measured to establish their relative ages. Most of the craters on Elysium Mons and the adjacent plains units are between 500 and 1000 meters in diameter. However, only craters 1 km in diameter or larger were used because of inadequate spatial resolution of some of the Viking images and to reduce probability of counting secondary craters. The six geologic units include all of the Elysium Mons construct and a portion of the plains units west of the volcano. The surface area of the units studied is approximately 128,000 sq km. Four of the geologic units were used to create crater distribution curves. There are no craters larger than 1 km within the Elysium Mons caldera. Craters that lacked raised rims, were irregularly shaped, or were arranged in a linear pattern were assumed to be endogenic in origin and not counted. A crater frequency distribution analysis is presented.

Mcbride, Kathleen↗
NASA NTRS1988

A stereo triangulation system for structural identification: Analytical and experimental results

Identification of large space structures' distributed mass, stiffness, and energy dissipation characteristics poses formidable analytical, numerical, and implementation difficulties. Development of reliable on-orbit structural identification methods is important for implementing active vibration suppression concepts which are under widespread study in the large space structures community. Near the heart of the identification problem lies the necessity of making a large number of spatially distributed measurements of the structure's vibratory response and the associated force/moment inputs with sufficient spatial and frequency resolution. In the present paper, we discuss a method whereby tens of active or passive (retro-reflecting) targets on the structure are tracked simultaneously by the focal planes of two or more video cameras mounted on an adjacent platform. Triangulation (optical ray intersection) of the conjugate image centroids yield inertial trajectories of each target on the structure. Given the triangulated motion of the targets, we apply and extend methodology developed by Creamer, Junkins, and Juang to identify the frequencies, mode shapes, and updated estimates for the mass/stiffness/damping parameterization of the structure. The methodology is semi-automated, for example, the post experiment analysis of the video imagery to determine the inertial trajectories of the targets typically requires less than thirty minutes of real time. Using methodology discussed herein, the frequency response of a large number of points on the structure (where reflective targets are mounted) on the structure can be determined from optical measurements alone. For comparison purposes, we also utilize measurements from accelerometers and a calibrated impulse hammer. While our experimental work remains in a research stage of development, we have successfully tracked and stereo triangulated 20 targets (on a vibrating cantilevered grid structure) at a sample frequency of 200 HZ, and have established conclusively the feasibility and desirability of this approach. We discuss, in summary, recent advances in analog and digital video processing methodology, actuation methods, and bring them to bear on the structural identification problem. We include a brief discussion of our experimental hardware and some recent experimental results which support the practical feasibility of this structural vibration sensing approach.

Junkins, J. L.↗
NASA NTRS1932

Reduction of wing lift by the drag

Drag and loss of lift of a wing are attributable to the same cause, wake formation, thus indicating that there is some relation between both. The analysis of measurements on Joukowsky sections revealed a typical course of curves for the interdependence between drag and loss of lift. The shape of the curves apparently depends quite regularly on the mean camber and on the thickness of the profile.

Betz, A↗
NASA NTRS1998

Fastrac Rocket Engine Combustion Chamber Acoustic Cavities

A three dimensional modal analysis was performed using finite fluid elements. The analysis shows four distinct modes of the Fastrac chamber plus cavities near the frequency of the chamber first tangential mode. The mode shapes illustrate the complexity of fluid oscillations in a three dimensional chamber and acoustic cavity. In addition, a first tangential forcing function was applied to the chamber with three different acoustic cavity fluid temperatures. It was observed that the acoustic cavity fluid temperature has a significant effect on the response of the chamber to first tangential mode oscillations.

Christensen, Eric↗
NASA NTRS1999

Approximation of the Newton Step by a Defect Correction Process

In this paper, an optimal control problem governed by a partial differential equation is considered. The Newton step for this system can be computed by solving a coupled system of equations. To do this efficiently with an iterative defect correction process, a modifying operator is introduced into the system. This operator is motivated by local mode analysis. The operator can be used also for preconditioning in Generalized Minimum Residual (GMRES). We give a detailed convergence analysis for the defect correction process and show the derivation of the modifying operator. Numerical tests are done on the small disturbance shape optimization problem in two dimensions for the defect correction process and for GMRES.

Arian, E.↗