Accelerating Antarctic Research Amid Rapid Changes
We must prioritize diversity, scientific communication and team-based science to keep up with rapid Antarctic ice and climate change.
Antarctic sea ice↗
SEARCH · Engineering Papers
Results for “rapid”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
VGOS VLBI Intensives Between MACGO12M and WETTZ13S for the Rapid Determination of UT1-UTC
In this work, we present a status update and preliminary results of the designated research and development VLBI Intensive program VGOS-INT-S, observed between MACGO12M and WETTZ13S for the rapid determination of the Earth’s phase of rotation, expressed via UT1-UTC. Since 2021, 27 Intensive sessions have been observed successfully utilizing a special observation strategy alternating between high- and low-elevation scans for improved determination of delays caused by the neutral atmosphere. Between the end of January and mid of March 2022, VGOS-INT-S was among the most accurate Intensive programs. During this time, eight sessions were observed with an average formal error of 3.1 µs and a bias w.r.t. IERS C04 of 1.1 µs. Later, the session performance decreased due to multiple technical difficulties.
VLBI↗
AERACEPT (Aerosol Rapid Analysis Combined Entry Probe/sonde Technology): Enabling Technology for Planetary Atmospheric Science Probes
Aerosols –clouds, hazes, and dusts –are a key part of planetary mass and energy balance, but difficult to study remotely. Current technology limits in situ measurements to once-in-a-lifetime flagship missions, which is not enough to characterize such highly dynamic systems. AERACEPT (AErosol Rapid Analysis Combined Entry Probe/sonde Technology) is an early-stage technology allowing asingle aeroshell body toact as both anentry vehicle and aerosol-samplingpassivedescent sonde, using the aeroshell’sown velocityto drive aerosol capture and separationthrough a series of embedded inlets.It takes advantage ofrecently developed thermal protection materials (3D-CC and 3MDCP)in combination withheritage aerosol sampling technologies fromboth planetary and airborne science (high-speed inlets and particle separation). By eliminating the need for heat shield separation, deployable parachutes, ordescent control, AERACEPT reducesthe mass, volume, and complexity ofplanetary aerosol sampling. Verifying AERACEPT’s performance involves modeling interdependencies between the size and geometry of the sampling inlets, the material response of the hypersonic phase of entry, the thermal conditions throughout the probe’s descent, the subsonic flow and particle sampling efficiency, the needed amount of sample, andthe cadence at which the sample can be analyzed. AERACEPT’s current predictions, using the Nephele Venus cloud mission concept (sampling between 63km to 39km, all subsonic) indicates AERACEPT can obtain >20 μL of particle material (roughly 10x the limit of detection) from droplets larger than 0.2 μm, with sample heating limited to <15 K above ambient. Validation testing for the thermal material response model has recently been performed at the UIUC Plasmatron facility, and for the flow and particle capture models is planned for this fall at the Ames Fluid Mechanics Laboratory.
AERACEPT↗
Phase-Free Orbital Element Model Designed to Enable Rapid Assessment of Eclipse and Radiation Profiles for Low-Thrust Spiral Transfers Around the Earth
The Gateway Power and Propulsion Element (PPE) will be the first low-thrust solar electric ion propulsion mission to transfer from a highly elliptical Earth-bound orbit to a southern near-rectilinear halo orbit (NRHO) at the Earth-Moon L2 point. Due to the low thrust nature of the transfer orbit, it is desirable to locate viable trajectories that minimize the time spent in the Van Allen radiation belts to reduce solar array degradation and keep radiation dosages below design limits. In addition to radiation, low thrust trajectories which spiral around the Earth will pass through at least one or more seasons of Earth eclipses. The solar electric propulsion system relies on sunlight to generate the power necessary to operate the ion thrusters. Therefore, it is advantageous to find trajectories which also minimize the amount of time spent in eclipse and avoid excessive battery draw-down periods. We present an analytical method which rapidly approximates low-thrust spiral trajectories, fit to high-fidelity simulated data and parameterized to allow for changes in vehicle thrust characteristics, that is post-processed to determine eclipse profiles and time spent in the belts using a novel approach that estimates the geometry of the belts using a first-order dipole approximation of the Earth’s magnetic field. This method can be used to find satisfactory launch dates and orbit orientations that can serve as initial guesses when optimizing such missions in high-fidelity software.
low thrust trajectory design↗
A Rapid Sequence of Solar Energetic Particle Events Associated with a Series of Extreme-ultraviolet Jets: Solar Orbiter, STEREO-A, and Near-Earth Spacecraft Observations
A series of solar energetic electron (SEE) events was observed from 2022 November 9 to November 15 by Solar Orbiter, STEREO-A, and near-Earth spacecraft. At least 32 SEE intensity enhancements at energies >10 keV were clearly distinguishable in Solar Orbiter particle data, with 13 of them occurring on November 11. Several of these events were accompanied by 10 MeV proton and 2MeV nucleon−1 heavy-ion intensity enhancements. By combining remote-sensing and in situ data from the three viewpoints (Solar Orbiter and STEREO-A were ∼20° and ∼15° east of Earth, respectively), we determine that the origin of this rapid succession of events was a series of brightenings and jetlike eruptions detected in extreme ultraviolet (EUV) observations from the vicinity of two active regions. We find a close association between these EUV phenomena, the occurrence of hard X-ray flares, type III radio bursts, and the release of SEEs. For the most intense events, usually associated with extended EUV jets, the distance between the site of these solar eruptions and the estimated magnetic connectivity regions of each spacecraft with the Sun did not prevent the arrival of electrons at the three locations. The capability of jets to drive coronal fronts does not necessarily imply the observation of an SEE event. Two peculiar SEE events on November 9 and 14, observed only at electron energies 50 keV but rich in 1MeV nucleon−1 heavy ions, originated from slow-rising confined EUV emissions, for which the process resulting in energetic particle release to interplanetary space is unclear.
D Lario↗
A Workflow to Rapidly Interrogate Multiscale Model Simulation Results Across Multiple Length Scales
Many tools can be used to visualize field and state variables for a single scale analysis so that the influence of relevant mechanisms can be evaluated. Finite element software is often utilized to simulate a unit cell of a material and visualize results at that scale. Material properties can be homogenized from individual constituents and local deformation, damage, and failure mechanisms can be evaluated within the unit cell due to globally applied boundary conditions. Such solutions can produce satisfactory results if a user is only interested in analyzing a single scale. But materials in general contain features across multiple length scales, and assumptions must be made when attempting to account for lower length scale phenomena within a higher length scale model. Multiscale modeling is an attractive means to model materials because detailed material responses can be tracked across multiple disparate length scales while reducing the amount of required assumptions. However, as the complexity of these models increases, a large amount of data can be produced, and data traceability can become increasingly more difficult. Field and state variables, which are naturally dependent on spatial position, may themselves be calculated from one or more lower length scale unit cell models each with their own appropriate field and state variables. The NASA Multiscale Analysis Tool (NASMAT) is one software that can be used to perform a multiscale analysis efficiently and output requested data at all length scales in the analysis. A companion open-source Python software, NASMAT PrePost, can be used to visualize NASMAT model results and rapidly interrogate multiscale data across multiple length scales. This presentation will demonstrate some of the key features of NASMAT PrePost on two multiscale problems by quickly displaying and demonstrating connectivity among multiscale results from large datasets.
Python↗
Evaluation of Long-Term Storage Stability and Operational Efficiency of Rapid Cycle Amine Adsorbents
With the recent incorporation of Mars Extravehicular Activity (EVA) into the 2025 NASA roadmap, Rapid Cycle Amine (RCA) technology advancement within the Exploration Extravehicular Mobility Unit (xEMU) applies to both the upcoming Lunar Artemis missions and future human exploration of Mars. The incorporation of commercial spacesuit vendors to service NASA’s crewed-space programs since 2021 has increased the demand for regenerable, RCA-based carbon dioxide (CO2) and humidity control adsorbents. The regenerable RCA subunit is the most advanced, long-term solution for CO2 removal and humidity control, enabling both lunar and Martian EVAs. The adsorbent selected for use within the RCA unit must exhibit sufficient storage stability and operational efficiency for prolonged missions. As XploSafe worked to simultaneously develop both a recirculating sub-atmospheric test rig and adsorbents for the RCA system within the xEMU, several novel adsorbents were evaluated for long-term storage stability in support of future extended-duration missions. The chosen materials were periodically evaluated by nuclear magnetic resonance (NMR) spectroscopy, thermal desorption-coupled with gas chromatography/mass spectrometry (TD-GC/MS), and CO2 adsorption to assess long-term storage efficacy across various environmental storage conditions. NMR spectroscopy was utilized by extracting the active CO2 adsorbing chemical from the solid support with deuterated solvent and comparing the spectra over time for degradation and change. The solid adsorbents were also analyzed via TD-GC/MS to reveal any potential off-gassing chemicals over time. Additionally, XploSafe’s breakthrough test rig was utilized to dose the solid adsorbents with a 585 BTU/h metabolic rate flow-equivalent CO2 stream and monitored for 0–99% CO2 breakthrough. The performance metrics from the breakthrough analysis were compared over the storage study duration for CO2 removal and humidity control. Xplo-SA9T was evaluated for 24 months, whereas two additional adsorbent variants, MMPA-Sorbent and LPEI-Sorbent, were each evaluated for 12 months.
John R Tidwell↗
Recirculating and Sub-Atmospheric Rapid Cycle Amine Swing Bed Testing at Various Metabolic Profiles, Temperatures, and Half-Cycle Times
Sixty years since the first spacewalk, NASA’s Extravehicular Mobility Unit (xEMU) exploration space suit has undergone numerous design improvements and iterations. As commercial manufacturers develop next-generation systems to support increasingly complex missions, including Moon-to-Mars architecture prototyping and the design of the Martian Portable Life Support System (PLSS), material selection and individual subunit testing under realistic metabolic and pressure conditions are paramount. To determine whether a reusable carbon dioxide (CO 2 ) scrubber design and adsorbent can be utilized in new suit configurations, an all-encompassing test rig is required to compare existing and newly developed technologies. The test rig must be capable of sub-atmospheric testing, calibrated humid CO 2 dosing, and facilitation of the evaluation of sorbents across a wide range of operational requirements. Recently, XploSafe has developed an Extravehicular Mobility Unit (xEMU) testing rig specifically designed to explore CO 2 and humidity control materials for spacesuits. This closed-loop recirculating swing bed (Rapid Cycle Amine Test Rig) was utilized to compare adsorbent utility across a wide range of xEMU operating conditions. Following successful testing with Xplo-SA9T over multiple simulated eight-hour Extravehicular Activity (EVA) tests, improvements to the test stand were considered. Regeneration vacuum supply within the test rig was updated to more closely resemble space vacuum, theoretically increasing half-cycle timing. An improved water vapor delivery system was incorporated to dose a wider calibrated range of humidity over both short and long-duration EVAs. A range of metabolic profiles between 800 and 3000 BTU/h were tested, and the corresponding average CO 2 steady-states were compared. The effect of dosing temperature at the adsorbent bed inlet between 10 and 40 ̊C and the corresponding CO 2 removal efficiency was also evaluated.
John R Tidwell↗
Non-contact rapid reader system for reflective particle tags
A reflective particle tag reader system includes a read head assembly having a camera, illuminators, and a rigid frame portion for supporting the camera and the illuminators. The illuminators illuminate a focal point located opposite the camera where a reflective particle tag is placed. A computer in data communication with the camera receives and store images of the reflective particle tag that are acquired by the camera. The computer is programmed to process video images and to quantify a positional alignment parameter and an angular alignment parameter of the reader with respect to the reflective particle tag. A rapid burst of image frames is obtained in response to the positional alignment and the angular alignment parameters being within a predetermined tolerance and identity of the reflective tag is established between a first image set and a second image set.
42 ENGINEERING↗
Rapidly solidifying Pb-free Sn-Ag-Cu-Al or Sn-Cu-Al solder
A solder alloy includes Sn, optional Ag, Cu, and Al wherein the solder alloy composition together with the solder alloy superheat temperature and rapid cooling rate from the superheat temperature are controlled to provide a dispersion of fine hard Cu—Al intermetallic particles in an as-solidified solder alloy microstructure wherein the particles are retained even after multiple solder reflow cycles often used in modern electronic assembly procedures to provide a particle strengthening to the solder joint microstructure as well as exert a grain refining effect on the solder joint microstructure, providing a strong, impact- and thermal aging-resistant solder joint that has beneficial microstructural features and is substantially devoid of Ag3Sn blades.
36 MATERIALS SCIENCE↗
ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications
Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogeneities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications
Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogeneities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications
Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogeneities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications
Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogenities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Rapid Memory Footprint Access Diagnostics
Footprint and reuse distance measure temporal locality and therefore do not capture the significance of access patterns (spacial locality). A strided access pattern has the largest possible footprint but usually has the best performance. To highlight exposed memory latency, we separate footprint into strided (prefetchable) and irregular (non-prefetchable) access components and calculate the growth rate of each. To rapidly compute these footprint access diagnostics, we present two methods, whole-program and precise. Current footprint analyses can cause 200× or more slowdown with realistic inputs and are therefore impractical. Our whole-program method reduces the overhead to 10% by computing upper bounds, but still yields inter-procedural insight through a call path profile. Our precise method uses additional static analysis and profiling to refine the upper bounds for intra-procedural loop nests. We evaluate our approaches using benchmarks that vary access patterns (strided \vs unpredictable), sparsity (all words in a cache line \vs some), and reuse (varying and repeated accesses per element). Notably, for loop nests with unpredictable accesses, the precise method's accuracy is within 10% of ideal. The whole-program method has sufficient accuracy to diagnose bottlenecks.
data locality, memory footprint, footprint access ↗
Autoignition of Premixed Liquefied Petroleum Gas in a Rapid Compression Machine: Experimental Results and Chemical Kinetic Mechanism Reduction
Liquefied petroleum gas (LPG) has many properties that make it an attractive alternative fuel such as lower cost than conventional fuels and an established distribution infrastructure. The development of high efficiency, spark ignited LPG engines is currently limited by engine knock and misfire. The knock and misfire limits are further complicated by the wide range of chemical reactivity in LPG, particularly in international markets. In this study, a rapid compression machine (RCM) was used to characterize the effects of variation in LPG fuel reactivity, equivalence ratio, and exhaust gas recirculation (EGR) on autoignition of LPG/oxidizer/inert/EGR blends. Experiments were conducted with 100% propane (C3H8) and blends of propane with propene, ethane, isobutane, and n-butane. EGR was simulated with mixtures of Ar, CO2, CO, and NO at substitution percentages from 0 to 30 mass percent. Equivalence ratio was varied from 0.75 to 1.5. Ignition delay period under homogeneous autoignition conditions was measured at compressed pressures and temperatures of 23 to 25 bar and 701 to 921 K, respectively. Zero-dimensional simulations of the RCM experiments were performed using Chemkin with several detailed chemical kinetic mechanisms to determine their suitability at predicting ignition delay periods. Multiple reduced chemical kinetic mechanisms were created from the NUIGMech1.1 mechanism to determine the optimal balance between accuracy and computational efficiency for future three-dimensional, time-dependent spark-ignited engine computations.
42 ENGINEERING↗
ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications
Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogenities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Lessons Learned for Rapid Decarbonization Of Power Sectors: Key Messages for Energy Ministers
This report covers key lessons learned for the rapid decarbonization of power systems, emphasizing best practices in planning, building, and operating power systems. This report is the result of a collaborative effort among various Clean Energy Ministerial (CEM) workstreams and partner initiatives: 21st Century Power Partnership (21CPP); Carbon Capture, Utilization and Storage (CCUS); Global Power System Transformation Consortium (G-PST), a partner to CEM; Industrial Deep Decarbonization Initiative (IDDI); International Energy Agency Digital Demand-Driven Electricity Networks Initiative (IEA 3DEN), a partner to CEM; International Smart Grid Action Network (ISGAN); Long Term Scenarios for the Energy Transition (LTES); Nuclear Innovation: Clean Energy Future (NICE Future); Super-Efficient Equipment and Appliance Deployment (SEAD). The contents are not intended to be comprehensive of all power sector topics, and there may be overlap between content in each section due to the nature of this first-of-its-kind collaborative effort to deliver unified messaging on power sector decarbonization to energy ministers. This work is intended to complement other work at the Clean Energy Ministerial and offers options for consideration, not specific policy recommendations.
21CPP↗