Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

An Investigation of Low Earth Orbit Internal Charging

Low Earth orbit is usually considered a relatively benign environment for internal charging threats due to the low flux of penetrating electrons with energies of a few MeV that are encountered over an orbit. There are configurations, however, where insulators and ungrounded conductors used on the outside of a spacecraft hull may charge when exposed to much lower energy electrons of some 100's keV in a process that is better characterized as internal charging than surface charging. For example, the minimal radiation shielding afforded by thin thermal control materials such as metalized polymer sheets (e.g., aluminized Kapton or Mylar) and multilayer insulation may allow electrons of 100's of keV to charge underlying materials. Yet these same thermal control materials protect the underlying insulators and ungrounded conductors from surface charging currents due to electrons and ions at energies less than a few keV as well as suppress the photoemission, secondary electron, and backscattered electron processes associated with surface charging. We investigate the conditions required for this low Earth orbit "internal charging" to occur and evaluate the environments for which the process may be a threat to spacecraft. First, we describe a simple one-dimensional internal charging model that is used to compute the charge accumulation on materials under thin shielding. Only the electron flux that penetrates exposed surface shielding material is considered and we treat the charge balance in underlying insulation as a parallel plate capacitor accumulating charge from the penetrating electron flux and losing charge due to conduction to a ground plane. Charge dissipation due to conduction can be neglected to consider the effects of charging an ungrounded conductor. In both cases, the potential and electric field is computed as a function of time. An additional charge loss process is introduced due to an electrostatic discharge current when the electric field reaches a prescribed breakdown strength. For simplicity, the amount of charge lost in the discharge is treated as a random percentage of the total charge between a set maximum and minimum amount so a user can consider partial discharges of insulating materials (small loss of charge) or arcing from a conductor (large loss of charge). We apply the model to electron flux measurements from the NOAA-19 spacecraft to demonstrate that charging can reach levels where electrostatic discharges occur and estimate the magnitude of the discharge.

NeergaardParker, Linda↗

IR spectroscopic quantification of small molecule transport and desorption phenomena in polymers

The application, continued performance, and degradation behavior of polymers often depends on their interaction with small organic or gaseous volatiles. Understanding the underlying permeation and diffusion properties of materials is crucial for predicting their barrier properties (permeant flux), drying behavior, solvent loss or tendency to trap small molecules, as well as their interaction with materials in the vicinity due to off-gassing phenomena, perhaps leading to compatibility concerns. Further, the diffusion of low Mw organics is also important for mechanistic aspects of degradation processes. Based on our need for improved characterization methods, a FTIR-based spectroscopic gas/volatile quantification setup was designed and evaluated for determination of the diffusion, desorption and transport behavior of small IR-active molecules in polymers. At the core of the method, a modified, commercially available IR transmission gas cell monitors time-dependent gas concentration. Appropriate experimental conditions, e.g. desorption or permeation under continuous flow or static gas conditions, are achieved using easily adaptable external components such as flow controllers and sample ampoules. This study presents overview approaches using the same IR detection methodology to determine diffusivity (desorption into a static gas environment, continuous gas flow, or intermittent desorption) and permeability (static and dynamic flow detection). Further, the challenges encountered for design and setup of IR gas quantification experiments, related to calibration and gas interaction, are presented. These methods establish desorption and permeation behavior of solvents (water and methanol), CO 2 off-gassing from foam, and offer simultaneous measurements of the permeation of several gases in a gas mixture (CO 2 , CO and CH 4 ) through polymer films such as epoxy and Kapton. They offer complementary guidance for material diagnostics and understanding of basic properties in sorption and transport behavior often of relevance to polymer degradation or materials reliability phenomena.

36 MATERIALS SCIENCE↗

Semi-2-interpenetrating polymer networks of high temperature systems

A semi-interpenetrating (semi-IPN) polymer system of the semi-2-IPN type is described in which a polymer of acetylene-terminated imidesulfone (ATPISO2) is cross linked in the presence of polyimidesulfone (PISO2). Six different formulations obtained by mixing of either ATPISO2-1n or ATPISO2-3n with PISO2 in three different proportions were characterized in terms of glass transition temperature, thermooxidative stability, inherent viscosity, and dynamic mechanical properties. Adhesive (lap shear) strength was tested at elevated temperatures on aged samples of adhesive scrim cloth prepared from each resin. Woven graphite (Celion 1000)/polyimide composites were tested for flexural strength, flexural modulus, and shear strength. The network polymers have properties intermediate between those of the component polymers alone, have greatly improved processability over either polyimide, and are able to form good adhesive bonds and composites, making the semi-2-IPN systems superior materials for aerospace structures.

Hanky, A. O.↗

Materials and Processes for New Propulsion Systems with Reduced Environmental Impact

Aeronautics research at NASA Glenn Research Center includes development, characterization and modeling of high temperature, lightweight materials and fabrication processes for aircraft propulsion systems with increased efficiency and reduced emissions, fuel burn and noise. Current propulsion materials research includes Ceramic Matrix Composites and Environmental Barrier Coatings, Polymer Matrix Composites and Additive Manufacturing processes. This presentation will summarize recent progress and plans in these areas. Ceramic Matrix Composites for Turbine Components: As part of NASA's Aeronautics research, Glenn Research Center has developed Ceramic Matrix Composites for 2700 degrees Fahrenheit turbine engine applications in the next generation of ultra-efficient aircraft. In this presentation, the development of advanced fiber and matrix constituents that enabled this advancement will be reviewed, and characterization of the resulting improvements in mechanical properties and durability will be summarized. Progress toward the development and validation of models predicting the effects of the engine environment on durability of Ceramic Matrix Composites and Environmental Barrier Coatings will be summarized. Progress and plans for collaborative research with industry and other government agencies will be reviewed. Polymer Matrix Composites for Powertrain and Impact Protection: A lightweight, hybrid polymer matrix composite/steel gear concept for rotorcraft power transmission applications was evaluated at realistic speed, torque, and power conditions. Dynamic testing was performed at 5000 horsepower and 5400 revolutions per minute with no performance degradation. Test results demonstrated the potential of hybrid composite / metal gears to reduce gear weight by approximately 15 percent, enabling the implementation of multi-speed drive systems, which would otherwise have a weight penalty, for increased speed and efficiency. Results of post-test inspection and endurance tests will be presented. Separately, ballistic impact tests demonstrated improved damage tolerance in polymer matrix composites by incorporating lightweight, thermoplastic veil materials between selected composite plies during the composite fabrication process. Results of impact tests and post-test inspection will be presented. Additive Manufacturing for Electric Propulsion: Additive Manufacturing processes offer the potential to fabricate new, high power density electric motor designs with complex geometries, multi-material components and optimally designed components that would not be feasible with traditional manufacturing processes. High performance stator components using advanced 3-phase conductive coils were fabricated using direct printing with optimized silver pastes. Additional additive manufacturing methods are being used to fabricate rotors and motor housing components. Systems studies show that the higher performance and lower weight motors offer improved energy efficiency and reduced emissions. Improvements to motor performance resulting from optimized materials and component designs will be presented.

Additive Manufacturing↗

Effect of LiAlO{sub 2} nanoparticle filler concentration on the electrical properties of PEO–LiClO{sub 4} composite

Highlights: ► Structural modification of nano LiAlO{sub 2} filler increased conductivity. ► Good ionic conductivity for (LiAlO{sub 2}){sub 1.5}(PEO){sub 11}(LiClO{sub 4}) at room temperature. ► Nano LiAlO{sub 2} filler enhanced both ion migration and orientation. ► High dielectric properties for (LiAlO{sub 2}){sub 1.5}(PEO){sub 11}(LiClO{sub 4}) at room temperature. - Abstract: Nano-composite polymer electrolytes are receiving attention as potential candidates to be used as electrolyte membranes in lithium polymer batteries and other devices. In this work, polyethylene oxide–LiClO{sub 4} based composite polymer electrolyte was prepared by solution casting method. The effect of LiAlO{sub 2} nanoparticle ceramic filler concentration on the structure and electrical conduction of the composite was studied. Nano-LiAlO{sub 2} was synthesized by sol–gel method. The samples were characterized using X-ray diffraction, Fourier Transmission-Infra Red, Differential Scanning Calorimetry, and tested by dielectric properties, Direct and Alternating current measurements as well as by impedance spectroscopy. All samples showed a behavior referring to an ionic conduction. Generally, the melting temperature of the polymer electrolyte decreased with filler concentration. Both thermal property and filler concentration influenced conductivity value. At room temperature, the highest ionic conductivity was 9.76 × 10{sup −5} ohm{sup −1} cm{sup −1} for sample with a composition of (LiAlO{sub 2}){sub 1.5}(polyethylene oxide){sub 11}(LiClO{sub 4}). All results were correlated and discussed.

36 MATERIALS SCIENCE↗

A particle image velocimeter for measuring the output of high energy detonators

Results from feasibility experiments are presented to confirm that tracer-particle motion resulting from mass-velocity fields created by driving high-energy detonator output into dynamic witness plates can be successfully measured using particle image velocimetry (PIV). Experimental results, application challenges, and PIV system development are presented. In shock mechanics research, the ability to quantitatively measure the state of compression of shocked materials in two and three dimensions based on particle tracer methods is of extreme importance since such measurements provide precise temporal snapshots of two and three-dimensional shock-induced velocity fields. This is especially true in the science of detonation physics where such measurements provide enormous insight into fundamental. questions for understanding shock-loading processes, effects of shock-front curvature, and mechanisms of energy conversion from stimulus to shock output. As an example, answering such questions is paramount to the understanding and development of newer, safer detonators. To date, few attempts have been made to develop and implement standard particle tracer techniques to measure shock-induced flows resulting from explosive devices. The experimental challenge lies in developing a methodology wherein a tracer particle's inertia does not hinder its ability to accurately move with the rapidly changing flow field. We have recently developed the ability to characterize the output of unloaded explosive initiators (e.g. exploding bridge wires, exploding foils, laser-driven plasmas, etc.) using an optically-based diagnostic consisting of an ultra-high speed, time-resolved PIV system and inert, transparent polymers serving as dynamic witness plates. Initiator output is directed into a witness plate, and measurements of shock and mass velocities are made in a two-dimensional plane aligned with the initiator centerline. The results allow initiator output to be quantified in any in-plane direction, typically along the centerline. The successful development and implementation of the new diagnostic to unloaded initiators provides the groundwork for characterizing full-up detonators employing high explosives (HE).

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Machine Intelligence-Centered System for Automated Characterization of Functional Materials and Interfaces

Classic design of experiment relies on a time-intensive workflow that requires planning, data interpretation, and hypothesis building by experienced researchers. Here, in this paper, we describe an integrated, machine-intelligent experimental system which enables simultaneous dynamic tests of electrical, optical, gravimetric, and viscoelastic properties of materials under a programmable dynamic environment. Specially designed software controls the experiment and performs on-the-fly extensive data analysis and dynamic modeling, real-time iterative feedback for dynamic control of experimental conditions, and rapid visualization of experimental results. The system operates with minimal human intervention and enables time-efficient characterization of complex dynamic multifunctional environmental responses of materials with simultaneous data processing and analytics. The system provides a viable platform for artificial intelligence (AI)-centered material characterization, which, when coupled with an AI-controlled synthesis system, could lead to accelerated discovery of multifunctional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Slow Magnetic Relaxation of Co( II ) Single Chains Embedded within Metal–Organic Superstructures

We report two coordination polymers of the type Co(BPDC)(N-ox), with BPDC being 4,4'-biphenyldicarboxylate and N-ox being pyridine N-oxide (PNO) or isoquinoline N-oxide (IQNO), have been synthesized and characterized. The compounds feature 2D and 3D metal–organic networks that encapsulate Co(II)-based chains in a rigid superstructure. The dc and ac magnetic properties of these Co(BPDC)(N-ox) materials have been investigated alongside those of a related Co(BDC)(PNO) compound (where BDC is 1,4-benzenedicarboxylate), which contains a smaller dicarboxylate linker. These Co(II)-containing coordination polymers exhibit slow magnetic relaxation, as observed by ac susceptibility measurements. The observed magnetic behavior of all compounds is consistent with an antiferromagnetic interaction between canted Co spins along the 1D skeleton, resulting in single-chain magnet behavior. In the case of Co(BPDC)(IQNO), weak interchain magnetic interactions yield 3D antiferromagnetic order while the inherent magnetic behavior stemming from the chain component is maintained. The combination of these effects in this material puts it at the frontier between single-chain magnets and classical bulk antiferromagnets. This work contributes to the limited group of materials featuring the organization of single-chain magnets within a coordination polymer superstructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Micro- and nanostructured electro-active polymer actuators as smart muscles for incontinence treatment

Treatments of severe incontinence are currently based on purely mechanical systems that generally result in revision after three to five years. Our goal is to develop a prototype acting in a natural-analogue manner as artificial muscle, which is based on electro-active polymers. Dielectric actuators have outstanding performances including millisecond response times, mechanical strains of more than 10 % and power to mass densities similar to natural muscles. They basically consist of polymer films sandwiched between two compliant electrodes. The incompressible but elastic polymer film transduces the electrical energy into mechanical work according to the Maxwell pressure. Available polymer films are micrometers thick and voltages as large as kV are necessary to obtain 10 % strain. For medical implants, polymer films should be nanometer thin to realize actuation below 48 V. The metallic electrodes have to be stretchable to follow the strain of 10 % and remain conductive. Recent results on the stress/strain behavior of anisotropic EAP-cantilevers have shown dependencies on metal electrode preparation. We have investigated tunable anisotropic micro- and nanostructures for metallic electrodes. They show a preferred actuation direction with improved stress-strain behavior. The bending of the cantilever has been characterized by the laser beam deflection method. The impact of the electrode on the effective Young's Modulus is measured using an Ultra Nanoindentation Tester with an integrated reference system for soft polymer surfaces. Once ten thousand layers of nanometer-thin EAP actuators are available, devices beyond the envisioned application will flood the market.

36 MATERIALS SCIENCE↗

Solvent Quality Effects on Scaling Behavior of Poly(methyl methacrylate) Brushes in the Moderate- and High-Density Regimes

Herein, we give a detailed experimental analysis for scaling law behavior in the “moderately dense” and “high-density” brush regimes for poly(methyl methacrylate) brushes swollen in a range of solvent conditions. This expansive experimental analysis aims to validate decades of mean field theory predictions on power law scaling behavior of grafted polymer chains. Brushes with grafting densities (σ) ranging from 0.1 to 0.8 nm –2 are prepared by atom-transfer radical polymerization. The swollen thickness (h) is characterized using liquid cell ellipsometry, and the solvent quality is varied using mixtures of acetone and methanol. In a good solvent, the exponential scaling behavior (h ∝ σ n ) has the typical n = 1/3 dependency for grafting densities of σ ≤ 0.4 nm –2 . For grafting densities of >0.4 nm –2 , n increases, indicating the transition from the moderately dense to the high-density brush regime. Furthermore, in a poor solvent, the scaling behavior is independent of σ and scales as h ∝ σ0.80, approaching the theoretical expectations of h ∝ σ 1 . An abrupt transition between these scaling law behaviors occurs at the Θ-solvent condition of ~45% (v/v) methanol in acetone. While our experimental results parallel trends predicted by mean field theory, differences are observed and appear to be attributed to self-solvation of the polymer, polydispersity in the molecular weight, and chain termination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electro-active polymers containing pendent 2,7-diarylfluorene fragments as materials for OLEDs

Poly[2-phenyl-7-(4-vinylphenyl)-9,9-diethylfluorene)], poly[2-(1-naphtyl)-7-(4-vinylphenyl)-9,9-diethylfluorene)] and poly[2-(4-biphenyl)-7-(4-vinylphenyl)-9,9-diethylfluorene)] were synthesized and characterized by NMR spectroscopy, elemental analysis and gel permeation chromatography. The derivatives represent materials of high thermal stability with initial thermal destruction temperatures from 390°C to 400 °C. The glass transition temperatures of the amorphous materials were 182 °C, 151 °C and 159 °C respectively. Hole-transporting properties of the polymeric materials were tested in the structures of organic light emitting diodes with Alq{sub 3} as the green emitter and electron transporting material. The device containing hole-transporting layers of polymer with 2-(4-biphenyl)-7-(4-vinylphenyl)-9,9-diethylfluorene moieties exhibited the best overall performance with turn on voltage of 3.6 V, a maximum photometric efficiency of 3.1 cd/A and maximum brightness of about 5300 cd/m{sup 2}.

36 MATERIALS SCIENCE↗

A facile alternative technique for large-area graphene transfer via sacrificial polymer

A novel method of transferring large-area graphene sheets onto a variety of substrates using Formvar (polyvinyl formal) is presented. Due to the ease at which formvar can be dissolved in chloroform this method allows for a consistent, a clean, and a more rapid transfer than other techniques including the PMMA assisted one. This novel transfer method is demonstrated by transferring large-area graphene onto a range of substrates including commercial TEM grids, silicon dioxide and glass. Raman spectroscopy was used to confirm the presence of graphene and characterize the morphological properties of the large-area sheets. SEM and AFM analyses demonstrated the effectiveness of our rapid transfer technique for clean crystalline large-area graphene sheets. The removal of the sacrificial polymer was found to be one to two orders of magnitude faster than PMMA methods. Ultimately this facile transfer technique offers new opportunities for a wide range of applications for large-area graphene through the utilization of a new sacrificial polymer.

36 MATERIALS SCIENCE↗

Gas adsorption/separation properties of metal directed self-assembly of two coordination polymers with 5-nitroisophthalate

Two new coordination polymers, namely, [Co(µ-nip)(µ-bpe)]{sub n} (1) and [Zn(µ-nip)(µ-bpe)]{sub n} (2) (nip: 5-nitroisophthalate, bpe: 1,2-bis(4-pyridyl)ethane) were hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction, IR spectroscopy, elemental analysis and thermal analysis. Moreover, atomically detailed simulation studies of complex 2 for CO{sub 2}/CH{sub 4} adsorption and separation were performed. Complex 1 consists of two dimensional (2D) (4,4) grid networks with the point symbol of 4{sup 4}.6{sup 2}. Complex 2 exhibits a 3-fold interpenetrating 3D framework with 6{sup 5}.8-dmp topology. Thermal properties of the complexes showed that both complexes were stable over 320 °C. Simulation studies demonstrated that complex 2 can separate CO{sub 2} from CH{sub 4} at low pressures at 273 K. - Graphical abstract: In this study, two new coordination polymers, namely, [Co(µ-nip)(µ-bpe)]{sub n} (1) and [Zn(µ-nip)(µ-bpe)]{sub n} (2) (nip: 5-nitroisophthalate, bpe: 1,2-bis(4-pyridyl)ethane) were hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction, IR spectroscopy, elemental analysis and thermal analysis. Moreover, atomically detailed simulation studies of complex 2 for CO{sub 2}/CH{sub 4} adsorption and separation were performed. Complex 1 consists of two dimensional (2D) (4,4) grid networks with the point symbol of 4{sup 4}.6{sup 2}. Complex 2 exhibits a 3-fold interpenetrating 3D framework with 6{sup 5}.8-dmp topology. Simulation studies demonstrated that complex 2 can separate CO{sub 2} from CH{sub 4} at low pressures at 273 K. Display Omitted - Highlights: • Two new coordination polymers with 5-nitroisophthalate and 1,2-bis(4-pyridyl)ethane. • Atomically detailed simulation studies of the complexes. • Complex 2 can be proposed as molecular sieve to separate CO{sub 2} from CH{sub 4} at low pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of Nanoporous Alumina Ultrafiltration Membrane with Tunable Pore Size Using Block Copolymer Templates

Control over nanopore size and 3D structure is necessary to advance membrane performance in ubiquitous separation devices. Here, inorganic nanoporous membranes are fabricated by combining the assembly of cylinder-forming poly(styrene-block-methyl methacrylate) (PS-b-PMMA) block copolymer and sequential infiltration synthesis (SIS). A key advance relates to the use of PMMA majority block copolymer films and the optimization of thermal annealing temperature and substrate chemistry to achieve throughfilm vertical PS cylinders. The resulting morphology allows for direct fabrication of nanoporous AlOx by selective growth of Al2O3 in the PMMA matrix during the SIS process, followed by polymer removal using oxygen plasma. Control over the pore diameter is achieved by varying the number of Al2O3 growth cycles, leading to pore size reduction from 21 to 16 nm. 3D characterization, using scanning transmission electron microscopy tomography, reveals that the AlOx channels are continuous through the film and have a gradual increase in pore size with depth. Finally, the ultrafiltration performance of the fabricated AlOx membrane for protein separation as a function of protein size and charge is demonstrated.

block copolymers↗

Characterizing Electric Field Exposed P3HT Thin Films Using Polarized-Light Spectroscopies

P3HT (poly (3-hexylthiophene)) has been widely used as a donor in the active layer in organic photovoltaic devices. Although moderately high-power conversion efficiencies have been achieved with P3HT-based devices, structural details, such as the orientation of polymer units and the extent of H- and J-aggregation are not yet fully understood; and different measures have been taken to control the ordering in the material. One such measure, which we have exploited, is to apply an electric field from a Van de Graaff generator. We used fluorescence (to measure anisotropy instead of polarization, which is more commonly measured) and Raman spectroscopy to characterize the order of P3HT molecules in thin films resulting from the field. We determine preferential orientations of the units in a thin film, consistent with observed hole mobility in thin-film-transistors, and observe that the apparent H-coupling strength changes when the films are exposed to oriented electrical fields during drying.

36 MATERIALS SCIENCE↗

Synthesis, characterization, UV and dielectric properties of hexagonal disklike ZnO particles embedded in polyimides

Graphical abstract: The hexagonal disklike ZnO particles with a diameter of 300-500 nm were synthesized from zinc acetate and NaOH in water with citric acid. ZnO/polyimide composite films with different ZnO contents was prepared. The prepared zinc oxide-polyimide composites were characterized for their structure, morphology and thermal behavior. Composites with ZnO particle contents from 1 to 5 wt% show good transparency in the visible region and luminescent properties. Highlights: {yields} A series of novel ZnO/polyimide composite films with different ZnO contents was prepared. {yields} The ZnO was homogeneously dispersed in the PI matrix. {yields} The composites showed the low dielectric constant of 50 at 10{sup 6} Hz. {yields} Homogenous dispersion and the amount of ZnO particles contributed to the dielectric properties of composites. -- Abstract: A series of novel ZnO/polyimide composite films with different ZnO contents was prepared through incorporation hexagonal disklike ZnO particles into poly(amic acid) of the pre polymer of the polyimide. The hexagonal disklike ZnO particles with a diameter of 300-500 nm were synthesized from zinc acetate and NaOH in water with citric acid. The prepared zinc oxide-polyimide composites were characterized for their structure, morphology, and thermal behavior employing Fourier transform infrared spectroscopy, scanning electron micrograph, X-ray diffraction and thermal analysis techniques. Thermal analyses show that the ZnO particles were successfully incorporated into the polymer matrix and these ZnO/polymer composites have a good thermal stability. Scanning electron microscopy studies indicate the ZnO particles were uniformly dispersed in the polymer and they remained at the original size (300-500 nm) before immobilization. All composite films with ZnO particle contents from 1 to 5 wt% show good transparency in the visible region and luminescent properties.

36 MATERIALS SCIENCE↗

Thermodynamic Properties and Molecular Packing Explain Performance and Processing Procedures of Three D18:NFA Organic Solar Cells

Abstract Organic solar cells (OSCs) based on D18:Y6 have recently exhibited a record power conversion efficiency of over 18%. The initial work is extended and the device performance of D18‐based OSCs is compared with three non‐fullerene acceptors, Y6, IT‐4F, and IEICO‐4Cl, and their molecular packing characteristics and miscibility are studied. The D18 polymer shows unusually strong chain extension and excellent backbone ordering in all films, which likely contributes to the excellent hole‐transporting properties. Thermodynamic characterization indicates a room‐temperature miscibility for D18:Y6 and D18:IT‐4F near the percolation threshold. This corresponds to an ideal quench depth and explains the use of solvent vapor annealing rather than thermal annealing. In contrast, D18:IEICO‐4Cl is a low‐miscibility system with a deep quench depth during casting and poor morphology control and low performance. A failure of ternary blends with PC 71 BM is likely due to the near‐ideal miscibility of Y6 to begin with and indicates that strategies for developing successful ternary or quaternary solar cells are likely very different for D18 than for other high‐performing donors. This work reveals several unique property–performance relations of D18‐based photovoltaic devices and helps guide design or fabrication of yet higher efficiency OSCs.

Wang, Zhen↗

A Nonfullerene Acceptor with Alkylthio‐ and Dimethoxy‐Thiophene‐Groups Yielding High‐Performance Ternary Organic Solar Cells

Herein, an A–D–A‐type nonfullerene acceptor (named IDTS‐4F) with an alkyl thiophenyl side chain and dimethoxy thiophene bridging unit is reported. The use of an alkyl thiophenyl group is important, as the insertion of sulfur atoms can slightly downshift the highest occupied molecular orbital (HOMO) level of the molecule and allows IDTS‐4F to match with state‐of‐the‐art donor polymer PM6 (or PM7). Compared with conventional nonfullerene acceptors, IT‐4F, the IDTS‐4F molecule, has a smaller optical bandgap and higher lowest unoccupied molecular orbital (LUMO) level, which are beneficial to increase the V oc and J sc of the devices. Nonfullerene organic solar cell devices are fabricated using IDTS‐4F. Although the binary device based on IDTS‐4F exhibits a lower fill factor (FF, 70%), the ternary device by incorporating 0.2 of IDTS‐4F and 0.8 of IT‐4F (with PM6 as the donor polymer) can simultaneously achieve a higher V oc and J sc , while maintaining the high FF (77%) of IT‐4F based system. Morphology characterizations indicate the formation of homogeneous film morphology, the large increase in phase purity and crystallinity, and the reduction in domain size upon addition of crystalline IDTS‐4F, while the electron/hole mobilities and recombination losses of the IT‐4F system are both maintained.

Zeng, Anping↗