Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameter calibration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Design studies of large aperture, high-resolution Earth science microwave radiometers compatible with small launch vehicles

High-spatial-resolution microwave radiometer sensing from space with reasonable swath widths and revisit times favors large aperture systems. However, with traditional precision antenna design, the size and weight requirements for such systems are in conflict with the need to emphasize small launch vehicles. This paper describes tradeoffs between the science requirements, basic operational parameters, and expected sensor performance for selected satellite radiometer concepts utilizing novel lightweight compactly packaged real apertures. Antenna, feed, and radiometer subsystem design and calibration are presented. Preliminary results show that novel lightweight real aperture coupled with state-of-the-art radiometer designs are compatible with small launch systems, and hold promise for high-resolution earth science measurements of sea ice, precipitation, soil moisture, sea surface temperature, and ocean wind speeds.

Schroeder, Lyle C.↗
NASA NTRS2011

Photocatalytic Active Radiation Measurements and Use

Photocatalytic materials are being used to purify air, to kill microbes, and to keep surfaces clean. A wide variety of materials are being developed, many of which have different abilities to absorb various wavelengths of light. Material variability, combined with both spectral illumination intensity and spectral distribution variability, will produce a wide range of performance results. The proposed technology estimates photocatalytic active radiation (PcAR), a unit of radiation that normalizes the amount of light based on its spectral distribution and on the ability of the material to absorb that radiation. Photocatalytic reactions depend upon the number of electron-hole pairs generated at the photocatalytic surface. The number of electron-hole pairs produced depends on the number of photons per unit area per second striking the surface that can be absorbed and whose energy exceeds the bandgap of the photocatalytic material. A convenient parameter to describe the number of useful photons is the number of moles of photons striking the surface per unit area per second. The unit of micro-einsteins (or micromoles) of photons per m2 per sec is commonly used for photochemical and photoelectric-like phenomena. This type of parameter is used in photochemistry, such as in the conversion of light energy for photosynthesis. Photosynthetic response correlates with the number of photons rather than by energy because, in this photochemical process, each molecule is activated by the absorption of one photon. In photosynthesis, the number of photons absorbed in the 400 700 nm spectral range is estimated and is referred to as photosynthetic active radiation (PAR). PAR is defined in terms of the photosynthetic photon flux density measured in micro-einsteins of photons per m2 per sec. PcAR is an equivalent, similarly modeled parameter that has been defined for the photocatalytic processes. Two methods to measure the PcAR level are being proposed. In the first method, a calibrated spectrometer with a cosine receptor is used to measure the spectral irradiance. This measurement, in conjunction with the photocatalytic response as a function of wavelength, is used to estimate the PcAR. The photocatalytic response function is determined by measuring photocatalytic reactivity as a function of wavelength. In the second method, simple shaped photocatalytic response functions can be simulated with a broad-band detector with a cosine receptor appropriately filtered to represent the spectral response of the photocatalytic material. This second method can be less expensive than using a calibrated spectrometer.

Davis, Bruce A.↗
NASA NTRS2017

The Fundamental Stellar Parameters of FGK Stars in the SEEDS Survey Norman, OK 73071, USA

Large exoplanet surveys have successfully detected thousands of exoplanets to-date. Utilizing these detections and non-detections to constrain our understanding of the formation and evolution of planetary systems also requires a detailed understanding of the basic properties of their host stars. We have determined the basic stellar properties of F, K and G stars in the Strategic Exploration of Exoplanets and Disks with Subaru (SEEDS) survey from Echelle spectra taken at the Apache Point Observatory's 3.5m telescope. Using ROBOSPECT to extract line equivalent widths and Temperature Gravity microtrubulent Velocity ITerations to calculate the fundamental parameters, we have computed T(sub eff), log(g), v(sub t), [Fe/H], chromospheric activity and the age for our sample. Our methodology was calibrated against previously published results for a portion of our sample. The distribution of [Fe/H] in our sample is consistent with that typical of the Solar neighbourhood. Additionally, we find the ages of most of our sample are less than 500 Myr, but note that we cannot determine robust ages from significantly older stars via chromospheric activity age indicators. The future meta-analysis of the frequency of wide stellar and sub-stellar companions imaged via the SEEDS survey will utilize our results to constrain the occurrence of detected comoving companions with the properties of their host stars.

Strategic Exploration of Exoplanets and Disks with↗
NASA NTRS2019

Laboratory for Atmospheres Instrument Systems Report

Studies of the atmospheres of our solar system's planets including our own require a comprehensive set of observations, relying on instruments on spacecraft, aircraft, balloons, and on the surface. These instrument systems perform one or both of the following: 1) provide information leading to a basic understanding of the relationship between atmospheric systems and processes, and 2) serve as calibration references for satellite instrument validation. Laboratory personnel define requirements, conceive concepts, and develop instrument systems for spaceflight missions, and for balloon, aircraft, and ground-based observations. Balloon and airborne platforms facilitate regional measurements of precipitation, cloud systems, and ozone from high-altitude vantage points, but still within the atmosphere. Such platforms serve as stepping-stones in the development of space instruments. Satellites provide nearly global coverage of the Earth with spatial resolutions and repetition rates that vary from system to system. The products of atmospheric remote sensing are invaluable for research associated with water vapor, ozone, trace gases, aerosol particles, clouds, precipitation, and the radiative and dynamic processes that affect the climate of the Earth. These parameters also provide the basic information needed to develop models of global atmospheric processes and weather and climate prediction. Laboratory scientists also participate in the design of data processing algorithms, calibration techniques, and the data processing systems.

Platnick, Steven E.↗
NASA NTRS2023

Modelling the Greenland Ice Sheet's Committed Contribution to Sea Level During the 21st Century

Mass loss from the Greenland Ice Sheet can be partitioned between surface mass balance and discharge due to ice dynamics through its marine-terminating outlet glaciers. A perturbation to a glacier terminus (e.g., a calving event) results in both an instantaneous response in velocity and mass loss and a diffusive response due to the evolution of ice thickness over time. This diffusive response means the total impact of a retreat event can take decades to be fully realized. Here we model the committed response of the Greenland Ice Sheet by applying perturbations to the marine-terminating glacier termini that represent recent observed changes, and simulating the response over the 21st century, while holding the climate forcing constant. The sensitivity of the ice sheet response to model parameter uncertainty is explored within an ensemble framework, and Gravity Recovery and Climate Experiment data is used to constrain the results using a Bayesian calibration approach. We find that the Greenland Ice Sheet's committed contribution to 21st century sea level rise is at least 33.5 [17.5 52.4] mm (25th and 75th percentiles in brackets), with at least 6 mm being attributable directly to terminus retreat that occurred between 2007 and 2015. The spread in our projections is driven by uncertainty in the basal friction coefficient. Our results complement the ISMIP6 Greenland projections, which report the ice sheet response to future forcing, excluding the background response. In this way, we can obtain estimates of Greenland's total contribution to sea level rise in 2100.

Isabel J. Nias↗
NASA NTRSDate not supplied

Improving Simulation of Irrigation in a Global Land Surface Model

Studies have shown that irrigated agriculture has substantial effects on local to regional hydrologic and atmospheric processes. These effects include increased evapotranspiration and near surface humidity, decreased air and ground temperature, augmented downwind precipitation, enhanced recharge, depletion of source water stocks, and overall changes to the regional water budget. However, developers of global offline and coupled modeling systems have been slow to incorporate irrigation. This presentation will describe progress towards simulating irrigation worldwide in the Land Information System (LIS) and Global Land Data Assimilation System (GLDAS). We have developed and refined the ability to simulate sprinkler irrigation, furrow irrigation, paddy irrigation, and drip irrigation. We have reconciled multiple global and national irrigation, land cover, and crop type databases in an effort to (1) distinguish irrigated and rainfed agriculture, (2) simulate the proper distribution of crops (as sub-grid tiles) in each model grid pixel, and (3) apply the most likely irrigation method in each tile based on the crop type and country or state level information on the relative usage of sprinkler, flood, and drip irrigation. Using agricultural water withdrawal data, as available, for calibration and evaluation, we show that the implemented approach is promising but that much fine tuning remains to be done. In particular, irrigation model parameters that produce good results in one location often produce less satisfying results in others.

Matthew Rodell↗
DOE OSTI2023

Characterization of Impure Plutonium Oxide Neutron Calibration Standards through Evaluation by Neutron Multiplicity Equations

Plutonium oxide calibration standards STD4C, STD6C and STD8C have been historically used, and are currently the only MT52 standards in use, for calibration and measurement control program of Passive/Active Neutron Coincidence Counter known as PAN1 at PF-4. In this paper, previously measured high-statistics data are used in conjunction with neutron multiplicity equations to determine multiplication M and α parameter of these standards as the explicit knowledge of these parameters may allow quantification of precision and bias of accountability measurements of different material types and matrices of items.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2010

The Atacama Cosmology Telescope: Cosmology from Galaxy Clusters Detected Via the Sunyaev-Zel'dovich Effect

We present constraints on cosmological parameters based on a sample of Sunyaev-Zel'dovich-selected galaxy clusters detected in a millimeter-wave survey by the Atacama Cosmology Telescope. The cluster sample used in this analysis consists of 9 optically-confirmed high-mass clusters comprising the high-significance end of the total cluster sample identified in 455 square degrees of sky surveyed during 2008 at 148 GHz. We focus on the most massive systems to reduce the degeneracy between unknown cluster astrophysics and cosmology derived from SZ surveys. We describe the scaling relation between cluster mass and SZ signal with a 4-parameter fit. Marginalizing over the values of the parameters in this fit with conservative priors gives (sigma)8 = 0.851 +/- 0.115 and w = -1.14 +/- 0.35 for a spatially-flat wCDM cosmological model with WMAP 7-year priors on cosmological parameters. This gives a modest improvement in statistical uncertainty over WMAP 7-year constraints alone. Fixing the scaling relation between cluster mass and SZ signal to a fiducial relation obtained from numerical simulations and calibrated by X-ray observations, we find (sigma)8 + 0.821 +/- 0.044 and w = -1.05 +/- 0.20. These results are consistent with constraints from WMAP 7 plus baryon acoustic oscillations plus type Ia supernova which give (sigma)8 = 0.802 +/- 0.038 and w = -0.98 +/- 0.053. A stacking analysis of the clusters in this sample compared to clusters simulated assuming the fiducial model also shows good agreement. These results suggest that, given the sample of clusters used here, both the astrophysics of massive clusters and the cosmological parameters derived from them are broadly consistent with current models.

Sehgal, Neelima↗
DOE OSTI2022

SDSS-IV MaStar: Stellar parameter determination with continuum-supplemented full-spectrum fitting

We present a stellar parameter catalog built to accompany the MaStar Stellar Library, which is a comprehensive collection of empirical, medium-resolution stellar spectra. We constructed this parameter catalog by using a multicomponent χ 2 fitting approach to match MaStar spectra to models generated by interpolating the ATLAS9-based BOSZ model spectra. The total χ 2 for a given model is defined as the sum of components constructed to characterize narrow-band features of observed spectra (e.g., absorption lines) and the broadband continuum shape separately. Extinction and systematics due to flux calibration were taken into account in the fitting. The χ 2 distribution for a given region of model space was sampled using a Markov chain Monte Carlo (MCMC) algorithm, the data from which were then used to extract atmospheric parameter estimates (T eff , log g, [Fe/H], and [α/Fe]), their corresponding uncertainties, and direct extinction measurements. Two methods were used to extract parameters and uncertainties: one that accepts the MCMC’s prescribed minimum-χ 2 result, and one that uses Bayesian inference to compute a likelihood-weighted mean from the χ 2 distribution sampled by the MCMC. Results were evaluated for internal consistency using repeat observations where available and by comparing them with external data sets (e.g., APOGEE-2 and Gaia DR2). Our spectral-fitting exercise reveals possible deficiencies in current theoretical model spectra, illustrating the potential power of MaStar spectra for helping to improve the models. This paper represents an update to the parameters that were originally presented with SDSS-IV DR17. The MaStar parameter catalog containing our BestFit results is available on the SDSS-IV DR17 website as part of version 2 of the MaStar stellar parameter value-added catalog.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2015

Psychophysical Calibration of Mobile Touch-Screens for Vision Testing in the Field

The now ubiquitous nature of touch-screen displays in cell phones and tablet computers makes them an attractive option for vision testing outside of the laboratory or clinic. Accurate measurement of parameters such as contrast sensitivity, however, requires precise control of absolute and relative screen luminances. The nonlinearity of the display response (gamma) can be measured or checked using a minimum motion technique similar to that developed by Anstis and Cavanagh (1983) for the determination of isoluminance. While the relative luminances of the color primaries vary between subjects (due to factors such as individual differences in pre-retinal pigment densities), the gamma nonlinearity can be checked in the lab using a photometer. Here we compare results obtained using the psychophysical method with physical measurements for a number of different devices. In addition, we present a novel physical method using the device's built-in front-facing camera in conjunction with a mirror to jointly calibrate the camera and display. A high degree of consistency between devices is found, but some departures from ideal performance are observed. In spite of this, the effects of calibration errors and display artifacts on estimates of contrast sensitivity are found to be small.

gamma correction↗
DOE OSTI2022

A New 1-step Arrhenius Decomposition Model for PBX 9501: Calibration with Isochoric-Adiabatic High-Activation-Energy Asymptotics and Uncertainty Quantification

Here we present a new 1-step Arrhenius thermal decomposition model of PBX 9501. As opposed to previous studies, we use high-energy asymptotic theory, and previously published equations of state to parameterize the model to experimental critical-time data. The model parameters were fit to experimental data using a bootstrapping procedure to capture the effects of experimental uncertainty. Subsequent implementation of the model in a chemicalkinetics ODE solver shows good agreement of times to ignition vs initial temperature in isochoric thermal explosion calculations with the results of the high-energy asymptotic theory. We also compare the resultant ZND structures to those of one of our previously calibrated burn models.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Neural network-based single material beam-hardening correction for X-ray CT in Additive Manufacturing

Beam-hardening (BH) artifacts are ubiquitous in X-ray CT scans of dense metal additively manufactured (AM) parts. While linearization approaches are useful for correcting beam-hardened data from single material objects, they either require a calibration scan or detailed system and material composition information. In this paper, we introduce a neural network-based, material-agnostic method to correct beam-hardening artifacts. We train a neural network to map the acquired beam-hardened projection values and the corresponding estimated thickness of the part based on an initial segmentation to beam-hardening related parameters, which can be used to compute the coefficients of a linearizing correction polynomial. A key strength of our approach is that, once the network is trained, it can be used for correcting beam hardening from a variety of materials without any calibration scans or detailed system and material composition information. Furthermore, our method is robust to errors in the estimated thickness due to the typical challenge of obtaining an accurate initial segmentation from reconstructions impacted by BH artifacts. We demonstrate the utility of our method to obtain high-quality CT reconstructions from a collection of AM parts -- suppressing cupping and streaking artifacts

Rahman, Obaid↗
DOE OSTI2020

3D Characterization of the Columnar-to-Equiaxed Transition in Additively Manufactured Inconel 718

Additive manufacturing (AM) provides enormous processing flexibility, enabling novel part geometries and optimized designs. Access to a local heat source further permits the potential for local microstructure control on the scale of individual melt pools, which can enable local control of part properties. In order to design tailored processing strategies for target microstructures, models predicting the columnar-to-equiaxed transition must be extended to the high solidification velocities and complex thermal histories present in AM. Here, we combine 3D characterization with advanced modeling techniques to develop a more complete understanding of the solidification process and evolution of microstructure during electron beam melting (EBM) of Inconel 718. Full calibration of existing microstructure prediction models demonstrates the differences between AM processes and more conventional welding techniques, underlying the need for accurate determination of key parameters that can only be measured directly in 3D. The ability to combine multisensor data in a consistent 3D framework via data fusion algorithms is essential to fully leverage these advanced characterization approaches. Thermal modeling provides insight on microstructure development within isolated solidification events and demonstrates the role of Marangoni effects on controlling solidification behavior.

Polonsky, Andrew↗
DOE OSTI2020

Characterization of 244 Cm Neutron Sources

There is a need to find a replacement for the 252 Cf sources currently used in Standards-based performance testing of neutron instrumentation. This is a result of its relatively short half-life, concerns about future availability and recent increases in cost. A potential replacement source, 244 Cm is evaluated in this study where two commercially available sources have been acquired and their neutron emission spectra measured using a pair of spectrometers. Both instruments showed the 244 Cm spontaneous neutron spectrum to be fully consistent with a MCNP6®-calculated spectrum using published Watt fission parameters for 244 Cm. In addition, the emission rate of the weaker 244 Cm source was established through a direct count rate comparison against a calibrated and similarly encapsulated 252 Cf source. The 244 Cm source emission rate was found to be in excellent agreement with value stated on the manufacturer's source certificate. It is concluded that 244 Cm would be an ideal replacement for 252 Cf based on its longer half-life (18.1 y) and its essentially identical neutron emission spectrum. In addition, 244 Cm sources are commercially available at reasonable cost.

244Cm↗
DOE OSTI2020

Automated Fitting of a Semi-empirical Multiphase Equation of State for Carbon

The equation of state (EOS) of carbon is important in high explosive, geophysical, and inertial confinement fusion applications. Within the semi-empirical Sesame framework, the EOS of each phase is represented by a sum of cold, vibrational, and thermal electronic Helmholtz free energy contributions. Each phase has ~5-10 independent parameters that are adjusted to reproduce single-phase data (e.g., thermal expansion, isothermal compression) as well as experimentally- and computationally- derived phase boundaries. Manual calibration of the full multiphase EOS is arduous. We present our progress in development of automated EOS parameterization based on minimization of an objective function. Here, this function encodes deviation of model EOS results from experimental/computational benchmarks. Optimization is implemented as a combination of global (particle swarm) and local optimization techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Reactive burn model calibration using high-throughput initiation experiments at sub-millimeter length scales

We report a first-of-its-kind model calibration was performed using Sandia National Laboratories’ high-throughput initiation (HTI) experiment for two types of vapor-deposited explosive films consisting of hexanitrostilbene (HNS) or pentaerythritol tetranitrate (PETN). These films exhibit prompt initiation, and they reach steady detonation at sub-millimeter length scales. Following prior work on HNS, we test the hypothesis of approximating these explosive films as fine-grained homogeneous solids with simple Arrhenius kinetics burn models. The model calibration process is described herein using a single-step as well as a two-step Arrhenius rate law, and it consists of systematic parameter sampling leading to a reduction in the model degrees of freedom. Multiple local minima are observed; results are given for seven different optimized parameter sets. Each model set is further evaluated in a two-dimensional simulation of the critical failure thickness for a sustained detonation. Overall, the two-step Arrhenius kinetics model captures the observed behavior for HNS; however, neither model produces a good fit to the PETN data. We hypothesize that the HTI results for PETN correspond to a heterogeneous response, owing to the smaller reaction zone of PETN compared to HNS (i.e., it does not homogenize the fine-grained hot spots as well). Future work should consider using the ignition and growth model for PETN, as well as other reactive burn models such as xHVRB, AWSD, PiSURF, and CREST.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Depth-Resolved Lithiated Gradients in Pristine and Laser-Ablated Anodes During Fast Charging

Laser ablating 3D electrode microstructures is a technique to improve Li-ion battery fast-charge performance. This technique has been theoretically proposed and electrochemically validated previously in the literature. The fundamental principle underlying laser ablation is that the ablated features reduce Li-ion transport pathways, improving access to the electrode active material near the current collector. This, in turn, promotes more homogeneous electrode utilization. The present study seeks to directly affirm the physics attributed to laser ablation using operando high-speed synchrotron X-ray diffraction. In this study, depth-resolved graphite lithiation gradients are measured operando during high-rate (15 min) charging. The depth-resolved lithiation dynamics of both ablated and non-ablated anodes are compared. The results highlight that the laser-ablated graphite electrode has notably more homogeneous utilization as compared to the non-ablated electrode. Additionally, the ablated electrode has a significant delay in reaching the maximum graphite lithiation at the separator, indicating less propensity for lithium plating. During low rate delithiation/discharge (2 hr), the two cells' lithiation gradients converge. Notably, a calibrated physics-based electrochemical model accurately reflects experimental findings, suggesting the potential to use pseudo-4D models not only to optimize laser ablation parameters in fast-charge capable electrodes but also to guide fast charging protocols that avoid lithium plating.

25 ENERGY STORAGE↗