Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Microstructure analyses and thermoelectric properties of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}

This study reports microstructural investigations of long-term annealed Ag{sub 1-x}Pb{sub m}Sb{sub 1+y}Te{sub 2+m} (m=18, x=y=0, hereinafter referred to as AgPb{sub 18}SbTe{sub 20}) (Lead-Antimony-Silver-Tellurium, LAST-18) as well as of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}, i.e. Ag-deficient and Sb-excess LAST-18 (x{ne}0,y{ne}0), respectively. Two different length scales are explored. The micrometer scale was evaluated by SEM to analyze the volume fraction and the number of secondary phases as well as the impact of processing parameters on the homogeneity of bulk samples. For AgPb{sub 18}SbTe{sub 20}, site-specific FIB liftout of TEM lamellae from thermoelectrically characterized samples was accomplished to investigate the structure on the nanometer scale. High-resolution TEM and energy-filtered TEM were performed to reveal shape and size distribution of nanoprecipitates, respectively. A hypothesis concerning the structure-property relationship is set out within the frame of a gradient annealing experiment. This study is completed by results dealing with inhomogeneities on the micrometer scale of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20} and its electronic properties. Highlights: Black-Right-Pointing-Pointer SEM and TEM microstructure investigation of long-term annealed AgPb{sub 18}SbTe{sub 20}. Black-Right-Pointing-Pointer SEM and thermoelectric studies on Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}. Black-Right-Pointing-Pointer Discussion concerning structure-property relationship in long-term annealed AgPb{sub 18}SbTe{sub 20}. Black-Right-Pointing-Pointer Correlation between Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20} microscale structure and electronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure evolution during service exposure of two cast, heat-resisting stainless steels - HP-Nb modified and 20-32Nb

The repair weldability of two types of heat-resistant austenitic stainless steel castings, HP-Nb modified alloys and 20-32Nb alloys, has been evaluated after extended service exposure of these materials at temperatures on the order of 815 deg. C (1500 deg. F). The initial part of this investigation has focused on characterization of the microstructure of these alloys after service exposure times of up to 12 years. Microstructure evolution from the as-cast condition to the service-exposed condition is described. In the as-cast condition, both eutectic NbC and Cr-rich M{sub 7}C{sub 3} carbides were observed in the HP-Nb alloys. In contrast, only eutectic NbC carbides were present in the as-cast 20-32Nb alloys due to a significantly higher atomic ratio of Nb/C as compared to the HP-Nb alloys. In the service-exposed condition, an Ni-Nb silicide and Cr-rich M{sub 23}C{sub 6} were identified in both alloys. The HP-Nb alloys exhibited a much higher total volume fraction of microconstituents than the 20-32Nb alloys and the M{sub 23}C{sub 6} phase was more prevalent than Ni-Nb silicide. In contrast, the Ni-Nb silicide was dominant in the service-exposed 20-32Nb alloys. This difference resulted in a significant increase in the repair welding liquation cracking susceptibility of the 20-32Nb service-exposed alloy.

36 MATERIALS SCIENCE↗

Effects of heat input on microstructure and tensile properties of laser welded magnesium alloy AZ31

A 3 kW CO{sub 2} laser beam was used to join wrought magnesium alloy AZ31 sheets, and the effects of heat input on the quality of butt welding joints were studied. By macro and microanalysis, it is found that the welding heat input plays an important role in laser welding process for AZ31 wrought sheets. After welding, the grains far from the weld centre present the typical rolled structure. But the microstructure out of the fusion zone gradually changes to complete equiaxed crystals as the distance from the weld centre decreases. Adjacent to the fusion boundary, there is a band region with columnar grains, and its growth direction is obviously perpendicular to the solid/liquid line. The microstructure in fusion centre consists of fine equiaxed grains and the many precipitated particles are brittle phase Mg{sub 17}Al{sub 12} or Mg{sub 17}(Al,Zn){sub 12}. With increasing the heat input, the band width of columnar grains varies, the grains in fusion zone get coarser, and the distribution of precipitates changes from intragranularly scattered particles to intergranularly packed ones. The results of tensile test show that the change trend of ultimate tensile strength (UTS) and elongation of the welded joints is to increase at first and then decrease with the heat input increasing. When the heat input reaches 24 J mm{sup -1}, the maximum value of the UTS is up to 96.8% of the base metal.

36 MATERIALS SCIENCE↗

Microstructure, thermo-physical and mechanical properties of spray-deposited Si-30Al alloy for electronic packaging application

In this study, Si-30Al alloy was synthesized by the spray atomization and deposition technique. The microstructure and properties of the alloy were studied using optical microscopy, scanning electron microscopy, coefficient of thermal expansion (CTE) and thermal conductivity (TC) measurements, and 3-point bending tests. It was found that the microstructure of the alloy after hot pressing is composed of a continuous network of globular primary Si and interpenetrating secondary Al-rich phase. The property measurements results indicate that the spray-deposited 70Si30Al alloy has advantageous physical and mechanical characteristics, including low coefficient of thermal expansion (6.8 x 10{sup -6}/K), high thermal conductivity (118 W/mK), low density (2.42 g cm{sup -3}), high ultimate flexural strength (180 MPa) and Brinell hardness (261)

36 MATERIALS SCIENCE↗

Effect of molybdenum content on the microstructure and mechanical properties of ultra-fine Ti(C, N) based cermets

Effect of molybdenum as a sintering aid on the microstructure and mechanical properties of Ti(C, N)-20WC-15Co-Mo-2.5C system cermets was studied in this work. Ti(C, N)-based cermets with variable Mo content were fabricated by conventional powder metallurgy techniques. The microstructure was investigated by means of X-ray diffractometer, scanning electron microscopy in combination with an energy dispersive spectrometer. Mechanical properties such as transverse rupture strength, fracture toughness and hardness were also measured, respectively. Results revealed that finer grains, as well as larger amount of bright core/grey shell structures could be obtained by increasing the molybdenum content. Transverse rupture strength and hardness were also improved. Fracture toughness, however, was decreased with the increase of Mo content. The optimized content of Mo was chosen as 15 wt.% for Ti(C, N)-20WC-15Co-Mo-2.5C system cermets.

36 MATERIALS SCIENCE↗

Microstructural evolution of a MCrAlY coating upon isothermal annealing

The microstructural evolution of a freestanding {gamma} + {beta} NiCoCrAlY coating, as deposited by electron beam physical vapor deposition, was studied following isothermal annealing at 1373 K. Electron backscatter diffraction (EBSD) was used to characterize the crystallographic texture, grain and phase boundary population and the size and distribution of the grains in the coating as a function of annealing time. The as-deposited coating consisted of small equiaxed grains near the bottom, and large columnar grains near the surface of the coating. A phase separation process inside the columnar grains resulted in a local microstructure consisting of a periodic arrangement of {gamma} and {beta} lamellae, linked to each other according to the Kurdjumov-Sachs orientation relationship. Upon annealing, equiaxed-shaped grains formed within the coating at the expense of the columnar grains. The formation of the equiaxed grains corresponded with an increase of the total interface length per unit area in the coating. Upon prolonged annealing, growth of the equiaxed grains occurred according to a power law with a time exponent n of 2.

36 MATERIALS SCIENCE↗

Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel

The 'quenching and partitioning' process is a new heat treatment for the development of multiphase steels with improved mechanical properties. In this work, a partial austenitization followed by Q and P paths, at which the partitioning step is effectuated at a temperature equal to the quenching temperature, has been applied to a low-carbon steel. The resulting multiphase microstructures have been investigated by optical microscopy using bright field and differential interference contrast, electron backscatter diffraction, X-ray diffraction and magnetic measurements. This group of techniques has led to a complete identification of the microstructural constituents: ferrite present during the partial austenitization, epitaxial ferrite formed during cooling, martensite and retained austenite. The analysis of the results has shown a significant relevance of the epitaxial ferrite in the retention of austenite, whereas the carbon partitioning from martensite to austenite has played a minor role.

36 MATERIALS SCIENCE↗

Microstructural characteristics and corrosion behavior of a super duplex stainless steel casting

The machining of super duplex stainless steel castings is usually complicated by the difficulty involved in maintaining the dimensional tolerances required for given applications. Internal stresses originating from the solidification process and from subsequent heat treatments reach levels that exceed the material's yield strength, promoting plastic strain. Stress relief heat treatments at 520 deg. C for 2 h are an interesting option to solve this problem, but because these materials present a thermodynamically metastable condition, a few precautions should be taken. The main objective of this work was to demonstrate that, after solution annealing at 1130 deg. C and water quenching, stress relief at 520 deg. C for 2 h did not alter the duplex microstructure or impair the pitting corrosion resistance of ASTM A890/A890M Grade 6A steel. This finding was confirmed by microstructural characterization techniques, including light optical and scanning electron microscopy, and X-ray diffraction. Corrosion potential measurements in synthetic sea water containing 20,000 ppm of chloride ions were also conducted at three temperatures: 5 deg. C, 25 deg. C and 60 deg. C.

36 MATERIALS SCIENCE↗

Microstructure of high-strength foam concrete

Foam concretes are divided into two groups: on the one hand the physically foamed concrete is mixed in fast rotating pug mill mixers by using foaming agents. This concrete cures under atmospheric conditions. On the other hand the autoclaved aerated concrete is chemically foamed by adding aluminium powder. Afterwards it is cured in a saturated steam atmosphere. New alternatives for the application of foam concretes arise from the combination of chemical foaming and air curing in manufacturing processes. These foam concretes are new and innovative building materials with interesting properties: low mass density and high strength. Responsible for these properties are the macro-, meso- and microporosity. Macropores are created by adding aluminium powder in different volumes and with different particle size distributions. However, the microstructure of the cement matrix is affected by meso- and micropores. In addition, the matrix of the hardened cement paste can be optimized by the specific use of chemical additives for concrete. The influence of aluminium powder and chemical additives on the properties of the microstructure of the hardened cement matrices were investigated by using petrographic microscopy as well as scanning electron microscopy.

36 MATERIALS SCIENCE↗

Microstructural characterization and dry sliding wear resistance of MoO{sub 2}-strengthened {gamma}/NiMo alloys with different primary phases

Two {gamma}/NiMo alloys strengthened by a refractory metal oxide MoO{sub 2} phase were fabricated by a laser melting deposition process. Microstructural transformation of the alloys with different primary phases was identified and the crystal structure of the primary phases was confirmed by both X-ray diffraction and transmission electron microscopy. Meanwhile, room-temperature dry sliding wear behavior and mechanism difference of the alloys were also investigated mainly by scanning electron microscopy. Microstructures of the alloys varied from hypoeutectic to hypereutectic, as the molybdenum content increases. The hypoeutectic alloy was solidified on the basis of a Ni-base solid solution {gamma} primary phase, whereas the hypereutectic alloy was grown based on an intermetallic compound with NiMo primary phase. The {gamma}, NiMo primary phases and MoO{sub 2} strengthening phase were confirmed to have face-centered cubic, orthorhombic and monoclinic structures, respectively. Compared with the hypoeutectic alloy, the hypereutectic alloy exhibited higher wear resistance under the same condition. The predominant wear mechanism of the {gamma}/NiMo alloys transformed from micro-cutting to microcracking.

36 MATERIALS SCIENCE↗

Sr effect on the microstructure and tensile properties of A357 aluminum alloy and Al{sub 2}O{sub 3}/SiC-A357 cast composites

The effect of strontium as a modifier on the microstructures and tensile properties of two castable particulate metal matrix composites has been studied. The particulate metal matrix composites had similar matrix alloy (A357) but different reinforcing fine particles (silicon carbide and alumina). Results showed that the addition of 0.03% strontium makes a modest improvement to the yield strength, ultimate tensile strength and elongation percentage values, and the scatter of these properties, but makes a significant improvement to minimum strength and elongation results. Microstructural examinations by scanning electron microscope and energy dispersive spectroscopy analysis of metal matrix composites showed segregation of strontium on both the silicon carbide and alumina particles. Further results showed that the addition of higher strontium levels contributes to the over-modification of the eutectic silicon and promotes the formation of an Al-Si-Sr intermetallic compound on the particle/matrix interface.

36 MATERIALS SCIENCE↗

Effect of heat input on the microstructure and mechanical properties of tungsten inert gas arc butt-welded AZ61 magnesium alloy plates

In this paper, the effects of heat input on the microstructures and mechanical properties of tungsten inert gas arc butt-welded AZ61 magnesium alloy plates were investigated by microstructural observations, microhardness tests and tensile tests. The results show that with an increase of the heat input, the grains both in the fusion zone and the heat-affected zone coarsen and the width of the heat-affected zone increased. Moreover, an increase of the heat input resulted in a decrease of the continuous {beta}-Mg{sub 17}Al{sub 12} phase and an increase of the granular {beta}-Mg{sub 17}Al{sub 12} phase in both the fusion zone and the heat-affected zone. The ultimate tensile strength of the welded joint increased with an increase of the heat input, while, too high a heat input resulted in a decrease of the ultimate tensile strength of the welded joint. In addition, the average microhardness of the heat-affected zone and fusion zone decreased sharply with an increase of the heat input and then decreased slowly at a relatively high heat input.

36 MATERIALS SCIENCE↗

Microstructure and properties of 17-4PH steel plasma nitrocarburized with a carrier gas containing rare earth elements

The effect of rare earth addition in the carrier gas on plasma nitrocarburizing of 17-4PH steel was studied. The microstructure and crystallographically of the phases in the surface layer as well as surface morphology of the nitrocarburized specimens were characterized by optical microscope, X-ray diffraction and scanning tunneling microscope, respectively. The hardness of the surface layer was measured by using a Vickers hardness test. The results show that the incorporation of rare earth elements in the carrier gas can increase the nitrocarburized layer thickness up to 55%, change the phase proportion in the nitrocarburized layer, refine the nitrides in surface layer, and increase the layer hardness above 100HV. The higher surface hardening effect after rare earth addition is caused by improvement in microstructure and change in the phase proportion of the nitrocarburized layer.

36 MATERIALS SCIENCE↗

Studies of microstructural imperfections of powdered Zirconium-based alloys

Different model based approaches of X-ray diffraction line profile analysis have been applied on the heavily deformed zirconium-based alloys in the powdered form to characterize the microstructural parameters like domain size, microstrain and dislocation density. In characterizing the microstructure of the material, these methods are complimentary to each other. Though the parameters obtained by different techniques are differently defined and thus not necessarily comparable, the values of domain size and microstrain obtained from the different techniques show similar trends.

36 MATERIALS SCIENCE↗

Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds

The microstructure and mechanical properties of Inconel 617/310 austenitic stainless steel dissimilar welds were investigated in this work. Three types of filler materials, Inconel 617, Inconel 82 and 310 austenitic stainless steels were used to obtain dissimilar joint using the gas tungsten arc welding process. Microstructural observations showed that there was no evidence of any possible cracking in the weldments achieved by the nickel-base filler materials. The welds produced by 617 and 310 filler materials displayed the highest and the lowest ultimate tensile strength and total elongation, respectively. The impact test results indicated that all specimens exhibited ductile fracture. Among the fillers, Inconel 617 exhibited superlative fracture toughness (205 J). The mechanical properties of the Inconel 617 filler material were much better than those of other fillers. - Research Highlights: {yields} A fine dendritic structure was seen for the Inconel 617 weld metal. {yields} A number of cracks were initiated when the 310 SS filler metal was used. {yields} All welded samples showed ductile fracture. {yields} The Inconel 617 filler material presents the optimum mechanical properties.

36 MATERIALS SCIENCE↗

Microstructural study of transient liquid phase bonded DD98 and K465 superalloys at high temperature

Microstructure of a transient liquid phase (TLP) bonded joint between single crystal DD98 and polycrystalline K465 superalloys was investigated by scanning electron microscopy, transmission electron microscopy and X-ray diffraction techniques. After bonding at 1190 deg. C for 2 h, many phases formed in the centerline of the bonding zone due to an incompletely solidified liquid interlayer. There are script-like, tree-like and blocky compounds besides solid solution {gamma} phase in this region. The script-like phase is CrB boride that is rich in Cr, the tree-like compound rich in Ni is M{sub 23}B{sub 6} with FCC structure, and the blocky phase enriched in Ti, Ta, and Nb, is MC carbide that resulted from the interdiffusion of C atoms between dissimilar base metals. After TLP bonding, many blocky and fine M{sub 6}C particles rich in Cr and W appeared in the diffusion zone of the K465 side. A number of blocky and platelet M{sub 3}B{sub 2} borides rich in W, Cr and Mo precipitated in the diffusion zone of the DD98 side. - Research Highlights: {yields} DD98 and K465 alloy was TLP bonded. {yields} The microstructure changes of different parts were studied. {yields} CrB, M{sub 23}B{sub 6} and MC formed in the bonding zone. {yields} M{sub 6}C appeared in diffusion zone of K465 side and M{sub 3}B{sub 2} existed in diffusion zone of DD98 side.

36 MATERIALS SCIENCE↗

Microstructural analysis of laser weld fusion zone in Haynes 282 superalloy

Analytical electron microscopy and spectroscopy analyses of the fusion zone (FZ) microstructure in autogenous laser beam welded Haynes 282 (HY 282) superalloy were performed. The micro-segregation patterns observed in the FZ indicate that Co, Cr and Al exhibited a nearly uniform distribution between the dendrite core and interdendritic regions while Ti and Mo were rejected into the interdendritic liquid during the weld solidification. Transmission electron diffraction analysis and energy dispersive X-ray microanalysis revealed the second phase particles formed along the FZ interdendritic region to be Ti-Mo rich MC-type carbide particles. Weld FZ solidification cracking, which is sometimes associated with the formation of {gamma}-{gamma}' eutectic in {gamma}' precipitation strengthened nickel-base superalloys, was not observed in the HY 282 superalloy. Modified primary solidification path due to carbon addition in the newly developed superalloy is used to explain preclusion of weld FZ solidification cracking in the material. - Highlights: Black-Right-Pointing-Pointer A newly developed superalloy was welded by CO{sub 2} laser beam joining technique. Black-Right-Pointing-Pointer Electron microscopy characterization of the weld microstructure was performed. Black-Right-Pointing-Pointer Identified interdendritic microconstituents consist of MC-type carbides. Black-Right-Pointing-Pointer Modification of primary solidification path is used to explain cracking resistance.

36 MATERIALS SCIENCE↗

Microwave sintering of MoSi{sub 2}-Mo{sub 5}Si{sub 3} to promote a final nanometer-scale microstructure and suppressing of pesting phenomenon

This work shows an innovative sintering process for molybdenum disilicide (MoSi{sub 2}) and molybdenum silicide (Mo{sub 5}Si{sub 3}) in order to have a final nanometer-scale microstructure. Sintered MoSi{sub 2}-Mo{sub 5}Si{sub 3} was fabricated by microwave sintering. The final material showed a significant reduction of pesting phenomena for MoSi{sub 2}. The final microstructure is a mix of micrometer-scale MoSi{sub 2} and nanometer-scale Mo{sub 5}Si{sub 3} immersed in an amorphous SiO{sub 2} phase. This material was characterized by X-Ray diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Thermal Gravimetric Analysis (TGA). - Highlights: Black-Right-Pointing-Pointer We sintered the MoSi{sub 2}-Mo{sub 5}Si{sub 3} by microwave and obtained high final density material. Black-Right-Pointing-Pointer We got a final nanostructured material. Black-Right-Pointing-Pointer We inhibited pesting phenomenon for MoSi{sub 2}.

36 MATERIALS SCIENCE↗