Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lighting quality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

MULTI-DIMENSIONAL MODELING OF THE CFR ENGINE FOR THE INVESTIGATION OF SI NATURAL GAS COMBUSTION AND CONTROLLED END-GAS AUTOIGNITION

Engine knock and misfire are barriers to pathways leading to high-efficiency Spark-Ignited (SI) Natural Gas engines. The general tendency to knock is highly dependent on engine operating conditions and the fuel reactivity. The problem is further complicated by low emission limits and the wide range of chemical reactivity in pipeline quality natural gas. Depending on the region and the source of the natural gas, its reactivity, described by its methane number (analogous to the octane number for liquid SI fuels) can span from 65 - 95. In order to realize diesel-like efficiencies, SI natural gas engines must be designed to operate at high BMEP near knock limits over a wide range of fuel reactivity. This requires a deep understanding regarding the combustion-engine interactions pertaining to flame propagation and end-gas autoignition (EGAI). However, EGAI, if controlled, provides an opportunity to increase SI natural gas engine efficiency by increasing combustion rate and the total burned fuel, mitigating the effects of the slow flame speeds of natural gas fuels which generally reduce BMEP and increase unburned hydrocarbon emissions. For this reason, in order to study EGAI phenomenon, the present work highlights multi-dimensional computational fluid dynamics (CFD) models of the Cooperative Fuel Research (CFR) engine. The CFR engine models are used to investigate fuel-engine interactions that lead to EGAI with natural gas, including effects of fuel reactivity, engine operating parameters, and exhaust gas recirculation (EGR). A Three-Pressure Analysis, performed with GT-Power, was used to estimate initial and boundary conditions for the three-dimensional CFD model. CONVERGE CFD v2.4 was used for the three-dimensional CFD modeling where the level set G-Equation model and SAGE detailed chemical kinetics solver were used. An assessment of the different modeling approaches is also provided to evaluate their limitations, advantages and disadvantages, and for which situations they are most applicable. Model validation was performed with experimental data taken with a CFR engine over varying compression ratio, CA50, EGR fraction, and IMEP and shows good agreement in Peak Cylinder Pressure (PCP), PCP crank angle, and the location of the 10%, 50%, and 90% mass fraction burned (CA10, CA50, and CA90, respectively). The models can predict the onset crank angle and pressure rise rate for light, medium, and heavy EGAI under a variety of fuel reactivities and engine operating conditions.

Bestel, Diego↗
DOE OSTI2020

An Experimental Feasibility Study on Applying Neutron Tomography to Encapsulated Spent Nuclear Fuel - 20050

Visual inspection makes easier to ensure the integrity and safety of spent nuclear fuel (SNF) than any classical techniques. Various classical techniques have been applied but there are no reliable methods to qualitatively and quantitatively verify spent fuel in dry storage. Thus, the present authors have developed the prototype safeguards apparatus for dry storage employing the array of He-4 gas scintillation detectors (S670E, Arktis Radiation Detectors Ltd., Switzerland), newly designed to simultaneously measure thermal and fast neutrons without any moderators. The S670E detector has a cylindrical shape with a diameter of 52 mm and active length of 600 mm (total length: 875 mm). The detector is filled by He-4 gas with an approximate pressure of 180 bar for fast neutron detection, and its inner wall is coated by Li-6 for thermal neutron detection. The scintillation lights generated via Li-6 nuclear reaction and elastic scattering are collected by 24 SiPMs linearly paired at the center of the detector. The detector delivers a TTL (Transistor-Transistor Logic) output for pulse readout and UART (Universal Asynchronous Receiver Transmitter) for device control. In order to assess feasibility of the apparatus, an experimental system has been designed, built, and optimized via computational studies. Cf-252 neutron sources and linearly arrayed detectors, working as a single detector, were occupied for this study due to the difficulties in working with SNF. The laboratory scale cask (diameter: 0.67 m, height: 1.5 m), minimized by a factor of 10 compared to the actual thickness of a commercial TN-32 cask, was also manufactured. The detector array was designed to rotate the lab-scale cask and obtain 36 image profiles at every 10 degrees. All profiles were aligned in single frame image called a sinogram, and the cross-sectional image was then fabricated by the inverse radon transform algorithm. These experiments have been repeated with different configurations and numbers of sources. Some gamma-ray sources were also measured with neutron sources in order to distinguish between neutron and gamma-ray pulses. Basically, a He-4 detector is designed to run on Linux OS so it is difficult to directly apply to Windows-based equipment widely used in S. Korea. Therefore, a new data acquisition board working on Windows OS was designed and built. The board mainly consists of FPGA (Field Programmable Gate Array) and SoC (System on Chip) for TTL pulse readout, sorting measured data, and transferring data to a user interface. In conclusion, the tomographic system at lab-scale has shown considerable potential to detect a partial or gross defect of encapsulated assemblies in dry storage. Next steps of this study will be to 1) repeatedly carry out experiments to demonstrate scientific reliability and validity, and 2) numerically integrate signals with weight factors to enhance the image quality since the suggested system based on passive interrogation method requires longer measurement time. Finally, the system will apply to a commercial dry storage phased out soon in S. Korea. (authors)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

TOF-SIMS analysis of decoherence sources in superconducting qubits

Superconducting qubits have emerged as a potentially foundational platform technology for addressing complex computational problems deemed intractable with classical computing. Despite recent advances enabling multiqubit designs that exhibit coherence lifetimes on the order of hundreds of μs, material quality and interfacial structures continue to curb device performance. Two-level system defects in the thin superconducting film and adjacent dielectric regions introduce stochastic noise and dissipate electromagnetic energy at the cryogenic operating temperatures. In this study, we utilize time-of-flight secondary ion mass spectrometry to understand the role specific fabrication procedures play in introducing such dissipation mechanisms in these complex systems. We interrogated Nb thin films and transmon qubit structures fabricated through slight modifications in the processing and vacuum conditions. We find that when the Nb film is sputtered onto the Si substrate, oxide and silicide regions are generated at various interfaces. We also observe that impurity species, such as niobium hydrides and carbides, are incorporated within the niobium layer during the subsequent lithographic patterning steps. The formation of these resistive compounds likely impacts the superconducting properties of the Nb thin film. Additionally, we observe the presence of halogen species distributed throughout the patterned thin films. We conclude by hypothesizing the source of such impurities in these structures in an effort to intelligently fabricate superconducting qubits and extend coherence times moving forward.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

FMX – the Frontier Microfocusing Macromolecular Crystallography Beamline at the National Synchrotron Light Source II

Two new macromolecular crystallography (MX) beamlines at the National Synchrotron Light Source II, FMX and AMX, opened for general user operation in February 2017 [Schneider et al. (2013). J. Phys. Conf. Ser. 425 , 012003; Fuchs et al. (2014). J. Phys. Conf. Ser. 493 , 012021; Fuchs et al. (2016). AIP Conf. Proc. SRI2015 , 1741 , 030006]. FMX, the micro-focusing Frontier MX beamline in sector 17-ID-2 at NSLS-II, covers a 5–30 keV photon energy range and delivers a flux of 4.0 × 10 12 photons s −1 at 1 Å into a 1 µm × 1.5 µm to 10 µm × 10 µm (V × H) variable focus, expected to reach 5 × 10 12 photons s −1 at final storage-ring current. This flux density surpasses most MX beamlines by nearly two orders of magnitude. The high brightness and microbeam capability of FMX are focused on solving difficult crystallographic challenges. The beamline's flexible design supports a wide range of structure determination methods – serial crystallography on micrometre-sized crystals, raster optimization of diffraction from inhomogeneous crystals, high-resolution data collection from large-unit-cell crystals, room-temperature data collection for crystals that are difficult to freeze and for studying conformational dynamics, and fully automated data collection for sample-screening and ligand-binding studies. FMX's high dose rate reduces data collection times for applications like serial crystallography to minutes rather than hours. With associated sample lifetimes as short as a few milliseconds, new rapid sample-delivery methods have been implemented, such as an ultra-high-speed high-precision piezo scanner goniometer [Gao et al. (2018). J. Synchrotron Rad. 25 , 1362–1370], new microcrystal-optimized micromesh well sample holders [Guo et al. (2018). IUCrJ , 5 , 238–246] and highly viscous media injectors [Weierstall et al. (2014). Nat. Commun. 5 , 3309]. The new beamline pushes the frontier of synchrotron crystallography and enables users to determine structures from difficult-to-crystallize targets like membrane proteins, using previously intractable crystals of a few micrometres in size, and to obtain quality structures from irregular larger crystals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Structural inversion asymmetry in epitaxial ultrathin films of Bi(111)/InSb(111)B

Bismuth (Bi) films hold potential for spintronic devices due to strong spin-orbit coupling. Understanding the growth, surface states, and interactions with the substrate is key to their functionalization. Large-area high-quality (111) Bi ultrathin films were grown on InSb (111)B substrates by molecular beam epitaxy (MBE). Strong film-substrate interactions epitaxially stabilize the (111) orientation and lead to nonequivalent interface potentials. Analysis of angle-resolved photoemission spectroscopy (ARPES) measurements, employed to characterize the evolution of the surface states with film thickness, indicate a crossing at the $\overline{M}$ point, suggesting a topologically trivial phase in the thin film. In conclusion, the results show the presence of interfacial bonds to the substrate breaks inversion symmetry, preventing the semimetal-to-semiconductor transition predicted for freestanding bismuth layers, highlighting the importance of controlled functionalization and surface passivation of two-dimensional materials.

Inbar, Hadass S. [Univ. of California, Santa Barba↗
DOE OSTI2026

Downloadable Dynamometer Database (D3): Public Test Data on Advanced-Technology Vehicles

Access to high-quality, independent vehicle test data is critical to advancing energy-efficient transportation research. The Downloadable Dynamometer Database (D3) is a public repository of dynamometer test data on advanced-technology vehicles, generated at the Advanced Mobility Technology Laboratory (AMTL) at Argonne National Laboratory and hosted by the Transportation and Power Systems Division. The database has been made available to support researchers, students, and professionals engaged in energy-efficient vehicle research, development, and education. A wide range of vehicle categories has been tested (i.e., alternative fuel vehicles, conventional gasoline and diesel vehicles, all-electric vehicles, hybrid electric vehicles, and plug-in hybrid electric vehicles), as well as various drive cycles and test conditions documented in the accompanying D3 user presentation. Stakeholders can select a vehicle type, identify a vehicle of interest, and download the associated test data for use in their own analyses. Data downloaded from D3 must be accompanied by the required attribution: "This data is from the Downloadable Dynamometer Database and was generated at the Advanced Mobility Technology Laboratory (AMTL) at Argonne National Laboratory." These data are critical to vehicle modeling, validation, technology assessment, and educational use.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2005

Microfocus/Polycapillary-Optic Crystallographic X-Ray System

A system that generates an intense, nearly collimated, nearly monochromatic, small-diameter x-ray beam has been developed for use in macromolecular crystallography. A conventional x-ray system for macromolecular crystallography includes a rotating-anode x-ray source, which is massive (.500 kg), large (approximately 2 by 2 by 1 m), and power-hungry (between 2 and 18 kW). In contrast, the present system generates a beam of the required brightness from a microfocus source, which is small and light enough to be mounted on a laboratory bench, and operates at a power level of only tens of watts. The figure schematically depicts the system as configured for observing x-ray diffraction from a macromolecular crystal. In addition to the microfocus x-ray source, the system includes a polycapillary optic . a monolithic block (typically a bundle of fused glass tubes) that contains thousands of straight or gently curved capillary channels, along which x-rays propagate with multiple reflections. This particular polycapillary optic is configured to act as a collimator; the x-ray beam that emerges from its output face consists of quasi-parallel subbeams with a small angular divergence and a diameter comparable to the size of a crystal to be studied. The gap between the microfocus x-ray source and the input face of the polycapillary optic is chosen consistently with the focal length of the polycapillary optic and the need to maximize the solid angle subtended by the optic in order to maximize the collimated x-ray flux. The spectrum from the source contains a significant component of Cu K (photon energy is 8.08 keV) radiation. The beam is monochromatized (for Cu K ) by a nickel filter 10 m thick. In a test, this system was operated at a power of 40 W (current of 897 A at an accelerating potential of 45 kV), with an anode x-ray spot size of 41+/-2 microns. Also tested, in order to provide a standard for comparison, was a commercial rotating-anode x-ray crystallographic system with a pyrolytic graphite monochromator and a 250-micron pinhole collimator, operating at a power of 3.15 kW (current of 70 mA at an accelerating potential of 45 kV). The flux of collimated Cu K radiation in this system was found to be approximately 16 times that in the rotatinganode system. Data on x-ray diffraction from crystals of tetragonal form of lysozyme (protein) in this system were found to be of high quality and to be reducible by use of standard crystallographic software.

Joy, Marshall↗
DOE OSTI2026

Zero-added-loss entanglement multiplexing using time-bin spectral shearing

High-quality quantum communications that enable important capabilities, such as distributed quantum computing and sensing, will require quantum repeaters for providing high-quality entanglement. To realize high-rate heralded entanglement for quantum repeaters, Chen et al . [Phys. Rev. Appl. 19 , 054029 (2023)] proposed a scheme for heralded-multiplexed generation of quasideterministic entangled photon pairs, called zero-added-loss multiplexing (ZALM). Here, we propose a design of the ZALM source using time-bin entanglement and spectral shearing. Additionally, we provide an analysis of experimentally relevant spectral-shearing parameters to optimize the spectral multiplexing. Moreover, we experimentally verify the compatibility of time-bin pulses and spectral shearing, as supported by observation of no appreciable phase shift when the same shearing is applied to both time bins. These results expand the benefits of applying a ZALM source to time-bin entanglement use cases. Moreover, more fully demonstrating time-bin and spectral shearing compatibility clears a path toward a broader use of spectral shearing that provides a deterministic frequency shift of high utility.

entanglement production↗
DOE OSTI2026

Connecting agriculture and renewable energy: insights into microclimatic changes, physiological, biochemical, and yield responses under agrivoltaics: a review

Agrivoltaics, the synergistic integration of agriculture and solar energy production on the same piece of land, has emerged as a compelling dual-use solution that maximizes land productivity while simultaneously addressing the need for sustainable agricultural practices and renewable energy generation. Despite the growing global interest in this dual-use system, the microclimatic shifts created beneath solar panels and their consequences for crop performance remain insufficiently synthesized. This review highlights the intricate interactions between agrivoltaics systems and plant microclimates, discussing their impacts on various physiological processes, metabolic pathways, and overall yield responses in different crop species. Evidence indicates that moderated light intensity and altered microclimates can enhance water-use efficiency, stabilize photosynthetic function, and trigger beneficial metabolic adjustments; however, responses remain highly species-specific and strongly dependent on regional climate conditions and panel configuration. Yield outcomes vary widely among vegetables, cereals, pulses, and fruit crops, highlighting the necessity for tailored agronomic strategies and crop selection within agrivoltaic designs. A critical knowledge gap identified in this review concerns the limited understanding of molecular and omics-level responses underlying plant adaptation to agrivoltaic environments. We further provide a detailed and interdisciplinary overview of adaptive agronomic strategies, and optimal crop selection, tailored to agrivoltaic systems. Despite the benefits of land use efficiency and simultaneous food and energy production, challenges remain concerning initial investment, technological adaptation, social and legal barriers, and shade-induced yield penalties. Further research in this area will be critical to enhancing the agricultural, environmental, and economic sustainability of agrivoltaics while simultaneously augmenting their practical utility and appeal to farmers in the future.

14 SOLAR ENERGY↗
DOE OSTI2023

Metabolic multireactor: Practical considerations for using simple oxygen sensing optodes for high-throughput batch reactor metabolism experiments

We present a system for carrying out small batch reactor oxygen consumption experiments on water and sediment samples for environmental questions. In general, it provides several advantages that can help researchers achieve impactful experiments at relatively low costs and high data quality. In particular, it allows for multiple reactors to be operated and their oxygen concentrations to be measured simultaneously, providing high throughput and high time-resolution data, which can be advantageous. Most existing literature on similar small batch-reactor metabolic studies is limited to either only a few samples, or only a few time points per sample, which can restrict the ability for researchers to learn from their experiments. The oxygen sensing system is based very directly on the work of Larsen, et al. [2011], and similar oxygen sensing technology is widely used in the literature. As such we do not delve deeply into the specifics of the fluorescent dye sensing mechanism. Instead, we focus on practical considerations. We describe the construction and operation of the calibration and experimental systems, and answer many of the questions likely to come up when other researchers choose to build and operate a similar system themselves (questions we ourselves had when we first built the system). In this way, we hope to provide an approachable and easy to use research article that can help other researchers construct and operate a similar system that can be tailored to ask their own research questions, with a minimum of confusion and missteps along the way.

3D printing↗
DOE OSTI2025

Low-loss superconducting resonators fabricated from tantalum films grown at room temperature

The use of α-tantalum in superconducting circuits has enabled a considerable improvement in the coherence time of transmon qubits. The standard approach to grow α-tantalum thin films on silicon involves heating the substrate, which takes several hours per deposition and prevents the integration of this material with wafers containing temperature-sensitive components. We report a detailed experimental study of an alternative growth method of α-tantalum on silicon, which is achieved at room temperature through the use of a niobium seed layer. Despite a substantially higher density of oxygen-rich grain boundaries in the films sputtered at room temperature, resonators made from these films are found to have state-of-the-art quality factors, comparable to resonators fabricated from tantalum grown at high temperature. This finding challenges previous assumptions about correlations between material properties and microwave loss of superconducting thin films, and opens a new avenue for the integration of tantalum into fabrication flows with limited thermal budget.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Photoproduction of K0K0-bar with the GlueX Experiment

In this dissertation, we study photoproduction of K0 ?K 0 through the KSKLp and KSKSp ?nal states with the GlueX Phase-I (GlueX-I) data set. We measure the spin-density matrix elements (SDMEs) and di?erential cross section of ?(1020) ! KSKL to better understand photoproduction of light vector mesons. A mass independent Partial Wave Analysis (PWA) of the KSKL and KSKS meson spectrum below 2 GeV is also undertaken to study the meson spectrum with JPC = even++ and odd??. The ?(1020) di?erential cross section is measured at E = 8:2 ? 8:8 GeV and ?t = 0:15 ? 1:00 GeV2. The di?erential cross section is well described by an exponential decay with slope 4:44?0:01 GeV?2 and the integrated cross section is determined to be 295:7?0:4 nb, only statistical uncertainties are quoted. Both measurements are consistent and far more precise than the previous measurement by Ballam et al. [1]. The ?(1020) SDMEs were measured in nine bins of ?t in the same range. At low ?t, we ?nd the data were consistent with s-channel helicity conservation, SCHC, i. e. the only non-zero SDMEs were ?1 1?1 = ?Im(?2 1?1) = 1=2. At higher ?t, the SDMEs deviate from SCHC and the measurements indicate this is due to natural parity exchange since we observe that the SDMEs are consistent with zero unnatural exchange. We also ?find that the contribution from helicity double-flip amplitudes is consistent with zero. The measured SDMEs are in poor agreement with theoretical predictions put forward by JPAC [35]. These measurements will serve as input to re?ne models of production processes, which will be essential for the interpretation of possible signals of exotic mesons in GlueX. Analysis of the spectrum above the ?(1020) indicates the presence of at least three particles at ? 1:50, ? 1:75, and 2:20 GeV. We employ simple parametrizations of the resonance line shape based on relativistic Breit-Wigner functions considering cases with and without interference. The resonance at ? 1:50 GeV is not identifi?ed as any specifi?c resonance, but could be due to interference between the ?(1450) and !(1420). Our models favor the resonance at ~1:75 GeV as the X(1750) rather than the ?(1680). We ?find that introducing a third Breit-Winger into the models improves the ?t quality with the ?2/ndf going from 1.75 to 1.59 and 1.41 to 1.18 for models without and with interference respectively. A PWA of the KSKL spectrum indicates that the spectrum is consistent with exclusively spin-1 contribution up to ? 1:6 GeV. Above ? 1:6 GeV we ?find evidence for a small spin-3 contribution. We also ?nd that the spectrum predominantly positive reflectivity up to ? 1:6 GeV, after which the spectrum becomes a nearly equal mix of both. The KSKS system shows a rich spectrum with multiple resonance structures but is more statistically limited than the KSKL system. Modelling the line shape we ?find evidence at greater than 10? level in favor of a resonance at ? 1:75 GeV. The model parameters suggest this resonance is the f0(1710). The PWA of the KSKS system was inconclusive. However, using a small set of amplitudes suggests that the spin-2 contribution to the spectrum is primarily in the range 1:2?1:6 GeV, where f2(1270), a2(1320) and f02 (1525) are expected.

Linera, Gabriel Rodriguez↗
DOE OSTI2020

Metalorganic chemical vapor deposition of ZnGeN 2 films on GaN: effects of cation stoichiometry on surface morphology and crystallinity

Novel optoelectronic device designs based on the heterostructures of III-N and II-IV-N 2 are promising to advance device performance significantly. For example, by utilizing InGaN-ZnGeN 2 quantum well (QW) structures instead of pure InGaN, the band structure engineering in the QW active region can lead to improved electron-hole wavefunction overlap, and thus enhance the radiative efficiency for photon generation. These novel heterostructures have great potential to address the current challenge of low quantum efficiency in InGaN QW based light emitting diodes emitting in green and beyond. The materials development of ZnGeN 2 is still at an early stage as compared to the much matured GaN material system. In an ideal octet rule preserving ordered structure of ZnGeN 2 , every N atom is coordinated by exactly two Zn and two Ge atoms. However, local violation of octet rule can be caused by non-ideal coordination of N by the cations. The disordered structure is thermodynamically less favorable but can still be achieved, for example, in kinetics-limited growth regime. The ordered ZnGeN 2 has a bandgap very close to that of GaN (~3.4 eV) and a lattice mismatch of <0.1% with GaN. Interestingly, the valence band of ZnGeN 2 has been predicted to be ~1 eV above that of GaN, which has inspired novel designs for high efficiency light emitters. In this work, we investigated the metalorganic chemical vapor deposition (MOCVD) of ZnGeN 2 films on GaN/c-sapphire templates. Diethylzinc (DEZn), germane (GeH4) and ammonia were used as the precursors for Zn, Ge and N, respectively. A systematic study was conducted to investigate the cation stoichiometry as a function of growth temperature (TG), total reactor pressure (P) and DEZn/GeH 4 molar flow rate ratio (RII/IV). Under the investigated growth window, the Zn/(Zn+Ge) composition in the films, determined from energy dispersive X-ray spectroscopy, decreased monotonically with increase in TG but increased with increase in P and RII/IV. Atom probe tomography data did not indicate the presence of any secondary phases such as Zn 3 N 2 or Ge 3 N 4 . The surface morphology and crystallinity of the grown films had strong correlation with the Zn/(Zn+Ge) composition. The scanning electron microscopy images showed that the near-stoichiometric films have planar surfaces whereas Zn-rich films had crystallites on their surface and the Zn-poor films had faceted surface. Scanning transmission electron microscopy (STEM) imaging revealed that the Zn-rich and Zn-poor films have columnar and filament-like morphology, respectively, whereas the near-stoichiometric films have continuous film-like cross-sectional morphology. TEM nano-diffraction patterns as well as X-ray diffraction 2θ-ω scan profiles indicate that the near stoichiometric films are single crystalline. Nano-diffraction pattern of the stoichiometric films resembled that of a disordered ZnGeN 2 structure. Room temperature Raman spectra of near-stoichiometric films showed only the phonon density of states like features of a cation disordered ZnGeN 2 . Cathodoluminescence and photoluminescence spectra measured at different temperatures had similar features with peak emission wavelength at ~ 2 eV. In conclusion, the stoichiometry of ZnGeN 2 films can be widely tuned by tuning the MOCVD growth parameters. The surface morphology and the crystallinity of the films were found to have strong correlation with the Zn/(Zn+Ge) composition. The stoichiometric ZnGeN 2 films grown on GaN were demonstrated with uniform surface morphology and high crystalline quality. The results from this work will provide pathway to implement ZnGeN 2 in device structures.

Karim, Md Rezaul↗
DOE OSTI2025

Progress Towards the Validation of a new RELAP5-3D model of the High Temperature Test Facility

Validation is a key step in the development of any type of systems model. As the next generation of reactors approaches, the need for codes that have been validated for these new types of systems continues to grow. An example of a prominent option is the Reactor Excursion Leak Analysis Program (RELAP5-3D), developed by Idaho National Laboratory. This code was developed for the purpose of systems level thermal-hydraulic modeling of light water reactors (LWRS) and postulated transients that can occur in LWRS.RELAP5-3D has been substantially validated against LWR data. Due to its long history as a reactor safety analysis tool, there has been an effort to adapt RELAP5-3D for the purposes of advanced reactor concepts such as prismatic high-temperature gas-cooled reactors (HTGRs). However, RELAP5-3D has not nearly been validated and verified for HTGRs to the degree of LWRs, warranting verification and validation opportunities with computational benchmarks and existing experimental facilities. Examples of such facilities include the modular high-temperature gas-cooled reactor (MHTGR) 350 and the high temperature engineering test reactor (HTTR) from Japan. The MHTGR 350 is a benchmark design concept for code-to-code verification purposes; therefore, it does not provide any experimental data for validation opportunities The HTTR provides useful multiphysics validation data but does not have the in-core instruments to generate thermal-hydraulic experimental data to help with RELAP5-3D validation. Consequently, a facility that could provide key in-core temperatures for thermal-hydraulic validation was still needed. The High Temperature Test Facility (HTTF) is an integral effects facility for HTGR thermal hydraulics developed and operated by Oregon State University. HTTF represents ¼ length scale of the General Atomics MHTGR and is rated for a total power of 2.2 MW. Axially, the core consists of an upper and lower reflector and 10 blocks, numbered from bottom to top (Block 1 is right above lower reflector). The core is heated via graphite resistive heater rods, with respective channels distributed throughout the core. The primary coolant is helium and heat can radiate out of the core to the reactor cavity cooling system (RCCS), which is cooled by water. The primary purpose of the facility is to investigate pressurized conduction cooldown (PCC) and depressurized conduction cooldown (DCC) transients, which are also referred to as the pressurized and depressurized loss of forced cooling respectively. Two experiments were chosen to perform the validation study with a RELAP5-3D model of HTTF. These experiments are PG-27 (PCC) and PG-29 (DCC). These were chosen based off of the quality of available experimental data before and during the experiment which led to their inclusion in the HTGR Thermal Hydraulics Benchmark.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Nonlocal Metasurfaces and Their High Q‐Factors in Fano Resonances

Herein nonlocal metasurfaces of parallel bars stitched to cubic rectangles containing structural and symmetry perturbations with a coupling of localized Mie resonance in meta‐atoms and Bragg modes in photonic crystals are reported. Two Fano resonances have been identified that maintain ultrahigh Q‐factors at incident angles of light up to 5°. Increasing the symmetry of the meta‐atoms results in Fano resonances with Q‐factors increased by a factor of 26, compared with the metasurfaces with a single bar stitched to a cubic rectangle at the incident angle of 5°. Due to nonlocal coupling of Bragg scattering and Mie resonance, the Q‐factor maintains almost a constant at 5° of incidence, while it varies with structural or symmetrical perturbations at 0°.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

A review of black carbon in snow and ice and its impact on the cryosphere

Black carbon (BC) has emerged as an important short-lived climate forcer. Due to its light absorption properties, BC can darken the snow/ice surface, affect the energy balance, and further lead to acceleration of the cryospheric melting. By reviewing the recent published literatures, we present an overview of the historical changes, spatial distribution of BC in snow/ice, and how these changes are related to the melting of the cryosphere (e.g., glaciers, snow cover, and sea ice). Ice core records show an abrupt increase of BC concentrations that began in the 1850s and continued throughout the 20th century, which is consistent with an increase in BC emissions owing to industrialization. A decrease in the amount of BC since 1970s in Arctic and European ice cores has been partially attributed to the Clean Air Act. However, in the Himalayas, BC records show a continuous increase during this period. BC concentrations in snow and ice in the mid-latitude regions are one to two orders of magnitude higher than those in the polar regions. In particular, BC concentrations in aged snow and granular ice in ablation areas of mountain glaciers are one to three orders of magnitude higher than those in fresh snow or snowpits in the glacier accumulation areas due to BC accumulation during melting season. BC in the surface snow/ice is responsible for about 20% of the albedo reduction in the Tibetan Plateau during glacier melt season. Globally, observations and modeling results indicate that radiative forcing (RF) induced by BC in snow and ice is highest in the mid-latitudes, ranging from several W m–2 in fresh snow to hundreds of W m–2 in aged snow and granular ice in glacier ablation areas. The large BC-in-snow RF and associated snow albedo feedback lead to an acceleration in the total glacier melt (approximately 20%) and/or a reduction in the duration of the snow cover by several days, resulting in an increase of glacier discharge. Given our limited understanding of the role of BC in cryospheric melting, it is important to synthesize the existing research on the multi-scale processes related to BC in snow and ice to identify the gaps in our understanding of these processes and to propose a path forward to improve the quality of our observations of the aforementioned phenomena to fill these gaps.

Kang, Shichang↗
DOE OSTI2022

Interactions between molecular-scale processes and hyporheic exchange for understanding Fe-S-C cycling in riparian wetlands (Final Report)

Wetlands represent some of the most productive ecosystems on the planet and critically influence global environmental health. Specifically, wetlands promote water quality by transforming nutrients and organic compounds and sequestering metals and contaminants. Riparian wetland hyporheic zones, where toxic surface water and anoxic groundwater mix, exhibit dynamic conditions that drive steep redox gradients and promote hotspots of diverse and fluctuating microbial activity. Changes in climate, water quality, and water quantity can disturb hydrologic flow and biogeochemical processing in these environments. Understanding how sulfate loading, impacted by hydrologic flux and anthropogenic inputs, influences iron and carbon cycling in wetlands will be crucial for predicting water quality issues driven by iron mineral precipitation and sorption, such as the release of heavy metals and other toxic elements. We used a fully integrated multi-scale and multi-method approach to develop a mechanistic understanding of how hydrologic flow influences coupled iron and sulfur cycles in riparian wetlands. This entailed hydrological, geochemical, and microbial observations at two locations: an anthropogenic sulfate-impacted riparian wetland in northern Minnesota, and a low-sulfate Fe-rich riparian wetland in Tims Branch at the Savannah River Site (SRS). These sites were characterized by hydrologically dynamic conditions where the stream and wetland systems oscillated between gaining (upward flow) and losing (downward flow) conditions that recharged the system occasionally with oxidants that fueled a variety of biogeochemical reactions. Aqueous geochemical measurements of surface water, groundwater, and porewater samples were made alongside solid-phase geochemical analyses of sediment gravity cores. Bulk X-ray absorption spectroscopy at the Advanced Photon Source (APS; Argonne) interrogated the speciation and distribution of Fe and S mineral phases of the sediments. Interestingly, it was discovered that, despite strongly reducing conditions, Fe(III) compounds and a variety of intermediate valence S compounds were stable in the subsurface. Indeed, compounds like thiosulfate, S(0), and intermediate valence organosulfur compounds were more prevalent than FeS and pyrite. The composition of the sediments did change with changes in hydrologic flow, showing their reactivity in changing redox conditions. The abundance of these intermediate S compounds was likely formed as a result of anaerobic oxidation by aqueous and solid-phase Fe(III) compounds, fueling a cryptic S cycle that is driving the breakdown of organic matter in the hyporheic zone. Microbiome surveys showed a core community that seemed stable across the landscape, but changed with increasing depth into the sediment. The community composition did not seem to change dramatically with changes in season or hydrologic flow, except for some organisms that have the potential to contribute to S cycling. More work is needed to confirm their functional activity. These fine process-scale analyses were placed within a dynamic field context using physical flow parameters from surface water and groundwater level measurements. These data helped shed light on sulfur-driven biogeochemical processes in hydrologically dynamic riparian wetlands, addressing a gap in our understanding about the impacts of pollution and other anthropogenic changes on ecologically sensitive environments.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2020

Biomass Estimation from Simulated GEDI, ICESat-2 and NISAR Across Environmental Gradients in Sonoma County, California

Estimates of the magnitude and distribution of aboveground carbon in Earth’s forests remain uncertain, yet knowledge of forest carbon content at a global scale is critical for forest management in support of climate mitigation. In light of this knowledge gap, several upcoming spaceborne missions aim to map forest aboveground biomass, and many new biomass products are expected from these datasets. As these new missions host different technologies, each with relative strengths and weaknesses for biomass retrieval, as well as different spatial resolutions, consistently comparing or combining biomass estimates from these new datasets will be challenging. This paper presents a demonstration of an inter-comparison of biomass estimates from simulations of three NASA missions (GEDI, ICESat-2 and NISAR) over Sonoma county in California, USA. We use a high resolution, locally calibrated airborne lidar map as our reference dataset, and emphasize the importance of considering uncertainties in both reference maps and spaceborne estimates when conducting biomass product validation. GEDI and ICESat-2 were simulated from airborne lidar point clouds, while UAVSAR’s L-band backscatter was used as a proxy for NISAR. To estimate biomass for the lidar missions we used GEDI’s footprint-level biomass algorithms, and also adapted these for application to ICESat-2. For UAVSAR, we developed a locally trained biomass model, calibrated against the ALS reference map. Each mission simulation was evaluated in comparison to the local reference map at its native product resolution (25 m, 100m transect, and 1 ha) yielding RMSEs of 57%, 75%, and 89% for GEDI, NISAR, and ICESat-2 respectively. RMSE values increased for GEDI’s power beam during simulated daytime conditions (64%), coverage beam during nighttime conditions (72%), and coverage beam daytime conditions (87%). We also test the application of GEDI’s biomass modeling framework for estimation of biomass from ICESat-2, and fine that ICESat-2 yields reasonable biomass estimates, particularly in relatively short, open canopies. Results suggest that while all three missions will produce datasets useful for biomass mapping, tall, dense canopies such as those found in Sonoma County present the greatest challenges for all three missions, while steep slopes also prove challenging for single-date SAR based biomass retrieval. Our methods provide guidance for the inter-comparison and validation of spaceborne biomass estimates through the use of airborne lidar reference maps, and could be repeated with on-orbit estimates in any area with high quality field plot and ALS data. These methods allow for regional interpretations and filtering of multi-mission biomass estimates toward improved wall-to-wall biomass maps through data fusion.

GEDI↗