Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrodynamics modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The local wavenumber model for computation of turbulent mixing

We present an overview of the current status in the development of a two-point spectral closure model for turbulent flows, known as the local wavenumber (LWN) model. The model is envisioned as a practical option for applications requiring multi-physics simulations in which statistical hydrodynamics quantities such as Reynolds stresses, turbulent kinetic energy, and measures of mixing such as density-correlations and mix-width evolution, need to be captured with relatively high fidelity. In this review, we present the capabilities of the LWN model since it was first formulated in the early 1990s, for computations of increasing levels of complexity ranging from homogeneous isotropic turbulence, inhomogeneous and anisotropic single-fluid turbulence, to two-species mixing driven by buoyancy forces. The review concludes with a discussion of some of the more theoretical considerations that remain in the development of this model.

42 ENGINEERING↗
DOE OSTI2025

Assessing the performance of MagLIF with 3D MHD simulations

The Magnetized Liner Inertial Fusion (MagLIF) experimental platform at Sandia National Laboratories has realized a number of recent improvements in electrical current and laser preheat coupling but fusion yields are below expectations, based on modeling with clean (that is, simulations with no interfacial instabilities and no mix) two-dimensional (2D) magneto-hydrodynamics (MHD) simulations, by a factor of 5 or more. However, magnetized liner implosions are known to produce helical magneto-Rayleigh–Taylor (MRT) modes and complex stagnation structures that cannot be directly modeled in 2D. This paper presents the results of 3D HYDRA MHD simulations, including helical MRT, showing that degradation from these instabilities can readily reproduce experimental yields, but it is difficult to simultaneously match the yield along with inferred fuel temperature, pressure, and burn history (assessed with x-rays), which are larger in the experiments considered here. Additional analysis methods and future experiments are proposed to help address the discrepancies. The 3D simulations also show, without substantive improvements to stability, changing the applied Bz or preheat is unlikely to increase performance of MagLIF to the same degree as clean 2D simulations. Finally, the first 3D HYDRA simulations with the Hall term show the ab initio production of helical MRT and produce a clear change in stagnation morphology compared to pre-seeded simulations without Hall. In spite of the differences, the simulations still produce comparable fusion performance but with longer, lower power, neutron yield history.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Integration of the fundamental knowledge on solvent-packing interactions into the multiscale framework for column scale design and optimization

The interfacial area, also known as the effective mass transfer area, is a key factor for determining the mass transfer for carbon dioxide (CO 2 ) capture via the chemical absorption process in a packed column, and thus the overall capture efficiency of the packed column. Most of the widely used empirical and semi-empirical models for interfacial area were derived indirectly through absorption mass transfer with simplifications based on fast chemical kinetics. This report presents the comprehensive unique multiscale approach to develop a surrogate model for effective mass transfer area in structured packed columns that accounts local hydrodynamics as well as variation in physical properties, and changes in solid surface characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Extensions to models of the galaxy–halo connection

ABSTRACT We explore two widely used empirical models for the galaxy–halo connection, subhalo abundance matching (SHAM) and the halo occupation distribution (HOD), and compare them with the hydrodynamical simulation IllustrisTNG (TNG) for multiple statistics quantifying the galaxy distribution at $n_{\rm gal}\approx 1.3\times 10^{-3}\, ({\rm Mpc}\,h^{-1})^{-3}$. We observe that in their most straightforward implementations, both models fail to reproduce the two-point clustering measured in TNG. We find that SHAM models that use the relaxation velocity, Vrelax, and the peak velocity, Vpeak, perform best, and match the clustering reasonably well, although neither captures adequately the one-halo clustering. Splitting the total sample into sub-populations, we discover that SHAM overpredicts the clustering of high-mass, blue, star-forming, and late-forming galaxies and underpredicts that of low-mass, red, quiescent, and early-forming galaxies. We also study various baryonic effects, finding that subhaloes in the dark-matter-only simulation have consistently higher values of their SHAM-proxy properties than their full-physics counterparts. We then consider a 2D implementation of the HOD model augmented with a secondary parameter (environment, velocity anisotropy, σ2Rhalf-mass, and total potential) tuned so as to match the two-point clustering of the IllustrisTNG galaxies on large scales. We analyse these galaxy populations adopting alternative statistical tools such as galaxy–galaxy lensing, void–galaxy cross-correlations, and cumulants of the density field, finding that the hydrodynamical galaxy distribution disfavours σ2Rhalf-mass and the total potential as secondary parameters, while the environment and velocity anisotropy samples are consistent with full physics across all statistical probes examined. Our results demonstrate the power of examining multiple statistics for determining the secondary parameters that are vital for understanding the galaxy–halo connection.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

Evolution of the Martian atmosphere

Evolution of Mars' noble gases through two stages of hydrodynamic escape early in planetary history has been proposed previously by the author. In the first evolutionary stage of this earlier model, beginning at a solar age of approximately 50 m.y., fractionating escape of a H2-rich primordial atmosphere containing CO2, N2, and the noble gases in roughly the proportions found in primitive carbonaceous (CI) chondrites is driven by intense extreme-ultraviolet (EUV) leads to a long (approximately 80 m.y.) period of quiescence, followed by an abrupt degassing of remnant H2, CO2, and N2 from the mantle and of solar-composition noble gases lighter than Xe from the planet's volatile-rich accretional core. Degassed H refuels hydrodynamic loss in a waning but still potent solar EUV flux. Atmospheric Xe, Kr, and Ar remaining at the end of this second escape stage, approximately 4.2 G.y. ago, have evolved to their present-day abundances and compositions. Residual Ne continues to be modified by accretion of solar wind gases throughout the later history of the planet. This model does not address a number of processes that now appear germane to Martian atmospheric history. One, gas loss and fractionation by sputtering, has recently been shown to be relevant. Another, atmospheric erosion, appears increasingly important. In the absence then of a plausible mechanism, the model did not consider the possibility of isotopic evolution of noble gases heavier than Ne after the termination of hydrodynamic escape. Subsequent non-thermal loss of N was assumed, in an unspecified way, to account for the elevation of N from the model value of approximately 250 percent at the end of the second escape stage to approximately 620 percent today. Only qualitative attention was paid to the eroding effects of impact on abundances of all atmophilic species prior to the end of heavy bombardment approximately 3.8 G.y. ago. No attempt was made to include precipitation and recycling of carbonates in tracking the pressure and isotopic history of CO2.

Pepin, R. O.↗
DOE OSTI2021

Global Temperature Responses to Large Tropical Volcanic Eruptions in Paleo Data Assimilation Products and Climate Model Simulations Over the Last Millennium

Abstract Large volcanic eruptions are one of the dominant perturbations to global and regional atmospheric temperatures on timescales of years to decades. Discrepancies remain, however, in the estimated magnitude and persistence of the surface temperature cooling caused by volcanic eruptions, as characterized by paleoclimatic proxies and climate models. We investigate these discrepancies in the context of large tropical eruptions over the Last Millennium using two state‐of‐the‐art data assimilation products, the Paleo Hydrodynamics Data Assimilation product (PHYDA) and the Last Millennium Reanalysis (LMR), and simulations from the National Center for Atmospheric Research Community Earth System Model‐Last Millennium Ensemble (NCAR CESM‐LME). We find that PHYDA and LMR estimate mean global and hemispheric cooling that is similar in magnitude and persistence once effects from eruptions occurring in short succession are removed. The estimates also compare well to Northern‐Hemisphere reconstructions based solely or partially on tree‐ring density, which have been proposed as the most accurate proxy estimates of surface cooling due to volcanism. All proxy‐based estimates also agree well with the magnitude of the mean cooling simulated by the CESM‐LME. Differences remain, however, in the spatial patterns of the temperature responses in the PHYDA, LMR, and the CESM‐LME. The duration of cooling anomalies also persists for several years longer in the PHYDA and LMR relative to the CESM‐LME. Our results demonstrate progress in resolving discrepancies between proxy‐ and model‐based estimates of temperature responses to volcanism, but also indicate these estimates must be further reconciled to better characterize the risks of future volcanic eruptions.

Tejedor, E.↗
NASA NTRS2002

Particle Segregation in a Flowing Suspension Subject to High-Gradient Strong Electric Fields

The widespread use of electro-hydrodynamic devices and processes emphasizes a critical need for developing a comprehensive predictive theory capable of improving our fundamental understanding of the behavior of a suspension subject to an AC electric field and shear, and of facilitating the design and optimization of such devices. The currently favored approach to the qualitative interpretation of the AC field driven manipulation of suspensions is based on a model which considers only the force exerted on a single particle by an external field and neglects the field-induced and hydrodynamic interparticle interactions both being inversely proportional to the interparticle distance raised to the power three. On the other hand, the purpose of the field-induced separation is to concentrate particles in certain regions of a device. This clearly raises the fundamental question regarding the extent to which we can neglect these slow decaying electrical and hydrodynamic collective interactions and rely on the predictions of a single-particle model. Another important issue that still remains open is how to characterize the polarization of a particle exposed to a strong electric field. The presentation will address both these questions. Experiments were conducted in a parallel-plate channel in which a 10(exp -3) (v/v) suspension of heavy, positively polarized Al2O3 spheres was exposed to an AC field under conditions such that the field lines were arranged in the channel cross-section perpendicular to the streamlines of the main flow. To reduce the effects of the gravitational settling of the particles, the channel was slowly rotated (4 rpm) around a horizontal axis. Following the application of a high-gradient strong AC field (approx. kV/mm), the particles were found to move towards both the high-voltage (HV) and grounded (GR) electrodes and to form 'bristles' along their edges.

Acrivos, Andreas↗
DOE OSTI2023

Thermal conductivity of a laser plasma

Here, we present a model of the electron thermal conductivity of a laser-produced plasma. The model, supported by Vlasov–Fokker–Planck simulations, predicts that laser absorption reduces conductivity by forcing electrons out of a Maxwell–Boltzmann equilibrium, which results in depletion of both low-velocity bulk electrons and high-velocity tail electrons. We show that both the bulk and tail electrons approximately follow super-Gaussian distributions, but with distinct exponents that each depend on the laser intensity and wavelength through the parameter a = Zv$^{2}_{E}$/v$^{2}_{T}$. For a value of a = 0.5, tail depletion reduces the thermal conductivity to half its zero-intensity value. We present our results as simple analytic fits that can be readily implemented in any radiation-hydrodynamics code or used to correct the local limit of non-local conduction models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1976

Impact of composite plates: Analysis of stresses and forces

The foreign object damage resistance of composite fan blades was studied. Edge impact stresses in an anisotropic plate were first calculated incorporating a constrained layer damping model. It is shown that a very thin damping layer can dramatically decrease the maximum normal impact stresses. A multilayer model of a composite plate is then presented which allows computation of the interlaminar normal and shear stresses. Results are presented for the stresses due to a line impact load normal to the plane of a composite plate. It is shown that significant interlaminar tensile stresses can develop during impact. A computer code was developed for this problem using the fast Fourier transform. A marker and cell computer code were also used to investigate the hydrodynamic impact of a fluid slug against a wall or turbine blade. Application of fluid modeling of bird impact is reviewed.

Moon, F. C.↗
DOE OSTI2025

Measuring the Mean Free Path of H i Ionizing Photons at 3.2 ≤ z ≤ 4.6 with DESI Y1 Quasars

The mean free path of ionizing photons in the intergalactic medium (IGM; λ $^{912}_{mpf}$ ) is a crucial quantity in modeling the ionization state of the IGM and the extragalactic ultraviolet background, and it is widely used in hydrodynamical simulations of galaxies and reionization. We construct the largest quasar spectrum data set to date—12,595 signal-to-noise ratio > 3 spectra—using the Y1 observations of the Dark Energy Spectroscopic Instrument, to make the most precise model-independent measurement of the mean free path at 3.2 ≤ z ≤ 4.6. By stacking the spectra in 17 redshift bins and modeling the Lyman-continuum profile, we get a redshift evolution λ $^{912}_{mpf}$ ∝ ( 1 + z ) − 4.27 at 2 ≤ z ≤ 5, which is much shallower than the previous estimate, λ $^{912}_{mpf}$ ∝ ( 1 + z ) − 5.4 . We then explore the sources of systematic bias, including the choice of the intrinsic quasar continuum, the consideration of Lyman-series opacity and Lyman-limit opacity evolution, and the definition of λ $^{912}_{mpf}$ . Combining our results with estimates of λ $^{912}_{mpf}$ at higher redshifts, we conclude at high confidence that the evolution in λ $^{912}_{mpf}$ steepens at z ≈ 5. We interpret this inflection as the transition from the end of H i reionization to a fully ionized plasma that characterizes the IGM of the past ∼10 billion yr.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2015

Numerical Modeling of Ophthalmic Response to Space

To investigate ophthalmic changes in spaceflight, we would like to predict the impact of blood dysregulation and elevated intracranial pressure (ICP) on Intraocular Pressure (IOP). Unlike other physiological systems, there are very few lumped parameter models of the eye. The eye model described here is novel in its inclusion of the human choroid and retrobulbar subarachnoid space (rSAS), which are key elements in investigating the impact of increased ICP and ocular blood volume. Some ingenuity was required in modeling the blood and rSAS compartments due to the lack of quantitative data on essential hydrodynamic quantities, such as net choroidal volume and blood flowrate, inlet and exit pressures, and material properties, such as compliances between compartments.

intracranial pressure↗
DOE OSTI2023

Hydrodynamics and Survivability during Post-main-sequence Planetary Engulfment

The engulfment of substellar bodies (SBs), such as brown dwarfs and planets, by giant stars is a possible explanation for rapidly rotating giants, lithium-rich giants, and the presence of SBs in close orbits around subdwarfs and white dwarfs. We perform three-dimensional hydrodynamical simulations of the flow in the vicinity of an engulfed SB. We model the SB as a rigid body with a reflective surface because it cannot accrete. This reflective boundary changes the flow morphology to resemble that of engulfed compact objects with outflows. We measure the drag coefficients for the ram-pressure and gravitational drag forces acting on the SB, and use them to integrate its trajectory inside the star. We find that engulfment can increase the luminosity of a 1 M ⊙ star by up to a few orders of magnitude. The time for the star to return to its original luminosity is up to a few thousand years when the star has evolved to ≈10 R ⊙ and up to a few decades at the tip of the red giant branch (RGB). No SBs can eject the envelope of a 1 M ⊙ star before it evolves to ≈10 R ⊙ if the orbit of the SB is the only energy source contributing to the ejection. In contrast, SBs as small as ≈10 MJup can eject the envelope at the tip of the RGB. The numerical framework we introduce here can be used to study planetary engulfment in a simplified setting that captures the physics of the flow at the scale of the SB.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Combining shallow-water and analytical wake models for tidal array micro-siting

For tidal-stream energy to become a competitive renewable energy source, clustering multiple turbines into arrays is paramount. Array optimisation is thus critical for achieving maximum power performance and reducing cost of energy. However, ascertaining an optimal array layout is a complex problem, subject to specific site hydrodynamics and multiple inter-disciplinary constraints. In this work, we present a novel optimisation approach that combines an analytical-based wake model, FLORIS, with an ocean model, Thetis. The approach is demonstrated through applications of increasing complexity. By utilising the method of analytical wake superposition, the addition or alteration of turbine position does not require re-calculation of the entire flow field, thus allowing the use of simple heuristic techniques to perform optimisation at a fraction of the computational cost of more sophisticated methods. Using a custom condition-based placement algorithm, this methodology is applied to the Pentland Firth for arrays with turbines of 3.05 m/s rated speed, demonstrating practical implications whilst considering the temporal variability of the tide. For a 24-turbine array case, micro-siting using this technique delivered an array 15.8% more productive on average than a staggered layout, despite flow speeds regularly exceeding the rated value. Performance was evaluated through assessment of the optimised layout within the ocean model that treats turbines through a discrete turbine representation. Used iteratively, this methodology could deliver improved array configurations in a manner that accounts for local hydrodynamic effects.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

On the study of hydrodynamic instabilities in the presence of background magnetic fields in high-energy-density plasmas

Blast-wave-driven hydrodynamic instabilities are studied in the presence of a background B-field through experiments and simulations in the high-energy-density (HED) physics regime. In experiments conducted at the Laboratoire pour l’utilisation des lasers intenses (LULI), a laser-driven shock-tube platform was used to generate a hydrodynamically unstable interface with a prescribed sinusoidal surface perturbation, and short-pulse x-ray radiography was used to characterize the instability growth with and without a 10-T B-field. The LULI experiments were modeled in FLASH using resistive and ideal magnetohydrodynamics (MHD), and comparing the experiments and simulations suggests that the Spitzer model implemented in FLASH is necessary and sufficient for modeling these planar systems. These results suggest insufficient amplification of the seed B-field, due to resistive diffusion, to alter the hydrodynamic behavior. Although the ideal-MHD simulations did not represent the experiments accurately, they suggest that similar HED systems with dynamic plasma-β (=2μ0ρv2/B2) values of less than ∼100 can reduce the growth of blast-wave-driven Rayleigh–Taylor instabilities. These findings validate the resistive-MHD FLASH modeling that is being used to design future experiments for studying B-field effects in HED plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Instability of a supersonic shock-free elliptic jet

A comparison of the measured and the computed spatial stability properties of an aspect ratio 2, supersonic, shock free, elliptic jet is presented. The shock free nature of the elliptic jet furnishes a perfect test of the validity of modeling the large scale coherent structures in the initial mixing region of noncircular supersonic jets with the linear hydrodynamic stability theory. Aerodynamic and acoustic data are measured to compute the mean velocity profiles and to provide a description of the spatial composition of pressure waves in the elliptic jet. The measured mean velocity profiles are employed to provide a qualitative model for the cross sectional geometry and the smooth velocity profiles utilized in the stability analysis. It is shown that the measured frequency associated with peak amplitude noise radiation agrees with that frequency predicted to dominate the large scale structure near the end of the potential core.

Baty, Roy S.↗
NASA NTRS1995

HPTAM, a two-dimensional Heat Pipe Transient Analysis Model, including the startup from a frozen state

A two-dimensional Heat Pipe Transient Analysis Model, 'HPTAM,' was developed to simulate the transient operation of fully-thawed heat pipes and the startup of heat pipes from a frozen state. The model incorporates: (a) sublimation and resolidification of working fluid; (b) melting and freezing of the working fluid in the porous wick; (c) evaporation of thawed working fluid and condensation as a thin liquid film on a frozen substrate; (d) free-molecule, transition, and continuum vapor flow regimes, using the Dusty Gas Model; (e) liquid flow and heat transfer in the porous wick; and (f) thermal and hydrodynamic couplings of phases at their respective interfaces. HPTAM predicts the radius of curvature of the liquid meniscus at the liquid-vapor interface and the radial location of the working fluid level (liquid or solid) in the wick. It also includes the transverse momentum jump condition (capillary relationship of Pascal) at the liquid-vapor interface and geometrically relates the radius of curvature of the liquid meniscus to the volume fraction of vapor in the wick. The present model predicts the capillary limit and partial liquid recess (dryout) in the evaporator wick, and incorporates a liquid pooling submodel, which simulates accumulation of the excess liquid in the vapor core at the condenser end.

Tournier, Jean-Michel↗
DOE OSTI2026

Multibody for Everybody (M4E) - A Linearization Approach to Enable Frequency Domain Analysis, Time Integration and Control Co-Design

1.1 Background/Objectives: Marine energy represents a promising yet underexploited source of power. To increase the harvested power, significant efforts have been made to improve wave energy converter (WEC) modeling capabilities and optimize power take-off (PTO) performance; however, these efforts have often treated WEC dynamics, PTO design, and controller development sequentially. In contrast, control co-design (CCD) is emerging as a promising strategy to address these issues directly, creating a growing need for fast analysis tools suitable for repeated simulation and parametric studies [1]. To support this need, this work presents the Multibody for Everybody (M4E) [2] linearization module, which employs a symbolic toolbox to provide deeper insight of WEC design parameters. The objective is to demonstrate that a minimal-coordinate linearization of articulated WEC dynamics can provide accurate wave response predictions and substantial computational savings relative to nonlinear time-domain simulation, while preserving compatibility with broader wave-energy analysis workflows, enabling CCD. 1.2 Approach/Activities: The proposed approach linearizes the equations of motion, generated by M4E, in minimal coordinates about a selected operating point and combines the resulting system with frequencydomain hydrodynamic terms to incorporate the reduced mass, damping, stiffness, and forcing operators. The linearized model is used for both impedance-based response amplitude operator (RAO) prediction and rapid regular-wave time integration. The methodology is demonstrated on a single-flap device and a FOSWEC configuration, with linearized M4E responses compared against the corresponding nonlinear M4E simulations and WEC-Sim results. Regular-wave time histories, RAO trends, and runtime differences are assessed. The framework is also compatible with broader wave-energy workflows, including coupling to WecOptTool, although that capability is not the focus of this work [3]. 1.3 Results/Lessons: The linearized M4E model reproduces key regularwave response characteristics such as integration and Response Amplitude over multiple frequencies. This module matches nonlinear M4E and WEC-Sim results while substantially reducing integration cost. Thus, the proposed framework can serve as a rapid analysis layer for articulated WEC design, parameter studies, and controls-oriented workflows. The analysis is most appropriate in the near-equilibrium regime, about the linearization point.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

ELG×LRG Distribution through Dark Matter Halo Dynamics

We investigate the clustering and halo occupation distribution (HOD) of DESI Y1 emission-line (ELGs) and luminous red (LRGs) galaxies at 0.8 < z < 1.1, including their cross-correlation (ELG×LRG), using the A BACUS S UMMIT suite and a new Halo Occupation Model (H OME ) for galaxy multitracers. This integrates intrahalo dynamics, halo exclusion, and quenching, bridging insights from hydrodynamical, HOD, abundance-matching, and semianalytic studies. Leveraging full phase-space information from the Uchuu N-body simulation, and sampling satellites from dark-matter particle positions via physically motivated prescriptions, Home reproduces the anisotropic clustering down to s = 200 h −1 kpc with unprecedented accuracy. Model parameters are inferred solely from two-point statistics using a two-level Bayesian framework, yielding high-fidelity ELG, LRG, and cross-reference catalogs. We find that satellite ELGs behave as incoherent flows within their parent halos, dominating the clustering below 4 h −1 Mpc. The HOD from the best-fit Home has the following properties: (i) 90.50% (85.91%) of ELGs (LRGs) are central galaxies without satellites, residing in halos of M vir ∼ 6.6 × 10 11 (1.2 × 10 13 ) h −1 M ⊙ ; (ii) the ELG×LRG cross-correlation is governed by central-central pairs and shaped by halo exclusion on 2–5 h −1 Mpc scales; (iii) 9.50% (14.09%) of ELGs (LRGs) are satellites, of which 1.09% (3.52%) inhabit halos with a central galaxy of the same species in a maximally conformal configuration, 7.02% (0.005%) orbit complementary hosts in a minimally conformal state, and 0.58% (10.57%) are orphans. The high sensitivity of Home precisely captures the dynamics of satellites in different host environments, opening a promising avenue for understanding systematics and the dynamical nature of dark matter, potentially distinguishing gravity models.

Favole, Ginevra [Universidad de La Laguna (Spain);↗